we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
pg_char_to_encoding() in multibyte disbaled case so that it does not
throw an error, rather return HARD CODED default value (currently SQL_ASCII).
This would solve the "non-mb backend vs. mb-enabled frontend" problem.
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
inval.c thought it could safely use the catcache to look up the OIDs of
system relations. Not good, considering that inval.c could be called
during catcache loading, if a shared-inval message arrives. Rip out the
lookup logic and instead use the known OIDs from pg_class.h.
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
(--with-maxbackends). Add a postmaster switch (-N backends) that allows
the limit to be reduced at postmaster start time. (You can't increase it,
sorry to say, because there are still some fixed-size arrays.)
Grab the number of semaphores indicated by min(MAXBACKENDS, -N) at
postmaster startup, so that this particular form of bogus configuration
is exposed immediately rather than under heavy load.
DataDir is set after read_pg_options if postgres is called
interactively. If postgres is forked by postgres DataDir is read from
the PGDATA enviromnent variable set by the postmaster and this explains
while the bug disappears. I have written this patch but I don't like
it. Any better idea?
Massimo Dal Zotto
> ps-status.patch
>
> macros for ps status, used by postgres.c and utility.c.
> Unfortunately ps status is system dependent and the current
> code doesn't work on linux. The use of macros confines system
> dependency to into one file (ps-status.h). Users of other
> operating systems should check this code and submit new macros.
assert.patch
adds a switch to turn on/off the assert checking if enabled at compile
time. You can now compile postgres with assert checking and disable it
at runtime in a production environment.
if MULTIBYTE is not enabled. So be sure to run initdb.
o these patches are made against the latest source tree (after
Bruce's massive patch, I think) BTW, I noticed that after running
regression, the oid field of pg_type seems disappeared.
regression=> select oid from pg_type; ERROR: attribute
'oid' not found
this happens after the constraints test. This occures with/without
my patches. strange...
o pg_database_mb.h, pg_class_mb.h, pg_attribute_mb.h are no longer
used, and shoud be removed.
o GetDatabaseInfo() in utils/misc/database.c removed (actually in
#ifdef 0). seems nobody uses.
t-ishii@sra.co.jp
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
seems that my last post didn't make it through. That's good
since the diff itself didn't covered the renaming of
pg_user.h to pg_shadow.h and it's new content.
Here it's again. The complete regression test passwd with
only some float diffs. createuser and destroyuser work.
pg_shadow cannot be read by ordinary user.
What it does:
It solves stupid problem with cyrillic charsets IP-based on-fly recoding.
take a look at /data/charset.conf for details.
You can use any tables for any charset.
Tables are from Russian Apache project.
Tables in this patch contains also Ukrainian characters.
Then run ./configure --enable-recode
The diff looks so simple and easy. But to find it wasn't fun.
It must have been there for a long time. What happened:
When a tuple in one of some central catalogs was updated, the
referenced relation got flushed, so it would be reopened on
the next access (to reflect new triggers, rules and table
structure changes into the relation cache).
Some data (the tupleDescriptor e.g.) is used in the system
cache too. So when a relation is subject to the system cache,
this must know too that a cached system relation got flushed
because the tupleDesc data gets freed during the flush!
For the GRANT/REVOKE on pg_class it was slightly different.
There is some local data in inval.c that gets initialized on
the first invalidation of a tuple in some central catalogs.
This needs a SysCache lookup in pg_class. But when the first
of all commands is a GRANT on pg_class, exactly the needed
tuple is the one actually invalidated. So I added little code
snippets that the initialization of the local variables in
inval.c will already happen during InitPostgres().
Attached is the patch to fix the warning messages from my code. I also
fixed one which wasn't my code. Apart from the usual warnings about the
bison/yacc generated code I only have one other warning message. This
is in gramm.y around line 2234. I wasn't sure of the fix.
I've also replaced all the calls to free() in gramm.y to calls to
pfree(). Without these I was getting backend crashes with GRANT. This
might already have been fixed.
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
Subject: [HACKERS] Small date patches (resubmitted)
Here a some small patches for the date/time code. They set the default
output format for the datetime type to the traditional Postgres
style, and fix a date debugging declaration. I submitted these
a couple of days ago, but they might have gotten lost...
NOTE: the second patch to dt.c is what I believe D'Arcy submitted as well,
that I claimed was taken out...sorry D'Arcy, my fault :(
Subject: [HACKERS] More patches for date/time
I have accumulated several patches to add functionality to the datetime
and timespan data types as well as to fix reported porting bugs on non-BSD
machines. These patches are:
dt.c.patch - add datetime_part(), fix bugs
dt.h.patch - add quarter and timezone support, add prototypes
globals.c.patch - add time and timezone variables
miscadmin.h.patch - add time and timezone variables
nabstime.c.patch - add datetime conversion routine
nabstime.h.patch - add prototypes
pg_operator.h.patch - add datetime operators, clean up formatting
pg_proc.h.patch - add datetime functions, reassign conflicting date OIDs
pg_type.h.patch - add datetime and timespan data types
The dt.c and pg_proc.h patches are fairly large; the latter mostly because I tried
to get some columns for existing entries to line up.
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
