Make build_joinrel_tlist() responsible for adding PHVs that were
already computed in one or the other input relation, and therefore
change add_placeholders_to_joinrel() to only add PHVs that will be
newly computed in this joinrel's output. This makes the handling
of PHVs in build_joinrel_tlist() more like its handling of plain
Vars, which seems like a good thing on intelligibility grounds
and will simplify planned future changes. There is a purely
cosmetic side-effect that the order of entries in the joinrel's
tlist may change; but since it becomes more like the order of
entries in the input tlists, that's not bad.
The reason it wasn't done like this originally was the potential
cost of looking up PlaceHolderInfo entries to consult ph_needed.
Now that that's O(1) it shouldn't hurt.
Discussion: https://postgr.es/m/1405792.1660677844@sss.pgh.pa.us
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
This event can happen when using SET ACCESS METHOD, as the data files of
the materialized need a full refresh but this command tag was not
updated to reflect that. The documentation is updated to track this
behavior.
Author: Onder Kalaci
Discussion: https://postgr.es/m/CACawEhXwHN3X34FiwoYG8vXR-oyUdrp7qcfRWSzS+NPahS5gSw@mail.gmail.com
Backpatch-through: 15
The current publisher code checks if UPDATE or DELETE can be executed with
the replica identity of the table even if it's a partitioned table. We can
skip checking the replica identity for partitioned tables because the
operations are actually performed on the leaf partitions (not the
partitioned table).
Reported-by: Brad Nicholson
Author: Hou Zhijie
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAMMnM%3D8i5DohH%3DYKzV0_wYuYSYvuOJoL9F5nzXTc%2ByzsG1f6rg%40mail.gmail.com
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
<sys/resource.h> is in SUSv2 and is on all targeted Unix systems. We
have a replacement for getrusage() on Windows, so let's just move its
declarations into src/include/port/win32/sys/resource.h so that we can
use a standard-looking #include. Also remove an obsolete reference to
CLK_TCK. Also rename src/port/getrusage.c to win32getrusage.c,
following the convention for Windows-only fallback code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
The grammar added for MERGE inadvertently made it accepted syntax in
places that were not prepared to deal with it -- namely COPY and inside
CTEs, but invoking these things with MERGE currently causes assertion
failures or weird misbehavior in non-assertion builds. Protect those
places by checking for it explicitly until somebody decides to implement
it.
Reported-by: Alexey Borzov <borz_off@cs.msu.su>
Discussion: https://postgr.es/m/17579-82482cd7b267b862@postgresql.org
fmgr_sql must make expanded-datum arguments read-only, because
it's possible that the function body will pass the argument to
more than one callee function. If one of those functions takes
the datum's R/W property as license to scribble on it, then later
callees will see an unexpected value, leading to wrong answers.
From a performance standpoint, it'd be nice to skip this in the
common case that the argument value is passed to only one callee.
However, detecting that seems fairly hard, and certainly not
something that I care to attempt in a back-patched bug fix.
Per report from Adam Mackler. This has been broken since we
invented expanded datums, so back-patch to all supported branches.
Discussion: https://postgr.es/m/WScDU5qfoZ7PB2gXwNqwGGgDPmWzz08VdydcPFLhOwUKZcdWbblbo-0Lku-qhuEiZoXJ82jpiQU4hOjOcrevYEDeoAvz6nR0IU4IHhXnaCA=@mackler.email
Discussion: https://postgr.es/m/187436.1660143060@sss.pgh.pa.us
Use SSE2 intrinsics to speed up the search, where available. Otherwise,
use a simple 'for' loop. The motivation to add this now is to speed up
XidInMVCCSnapshot(), which is the reason only unsigned 32-bit integer
arrays are optimized. Other types are left for future work, as is the
extension of this technique to non-x86 platforms.
Nathan Bossart
Reviewed by: Andres Freund, Bharath Rupireddy, Masahiko Sawada
Discussion: https://postgr.es/m/20220713170950.GA3116318%40nathanxps13
Per buildfarm, the output order of \dx+ isn't consistent across
locales. Apply NO_LOCALE to force C locale. There might be a
more localized way, but I'm not seeing it offhand, and anyway
there is nothing in this test module that particularly cares
about locales.
Security: CVE-2022-2625
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
Commit 59be1c942a already tried to make
src/test/recovery/t/033_replay_tsp_drops more reliable, but it wasn't
enough. Try to improve on that by making this use of a replication slot
to be more like others. Also, don't drop the slot.
Make a few other stylistic changes while at it. It's still quite slow,
which is another thing that we need to fix in this script.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/349302.1659191875@sss.pgh.pa.us
Since v14, the extended stats machinery will try to estimate for
otherwise-unsupported boolean expressions if they match an expression
available from an extended stats object. mcv.c did not get the memo
about this, and would spit up with "unknown clause type". Fortunately
the case is easy to handle, since we can expect the expression yields
boolean.
While here, replace some not-terribly-on-point assertions with
simpler runtime tests for lookup failure. That seems appropriate
so that we get an elog not a crash if we somehow get to the new
it-should-be-a-bool-expression code with a subexpression that
doesn't match any stats column.
Per report from Danny Shemesh. Thanks to Justin Pryzby for
preliminary investigation.
Discussion: https://postgr.es/m/CAFZC=QqD6=27wQPOW1pbRa98KPyuyn+7cL_Ay_Ck-roZV84vHg@mail.gmail.com
statext_is_compatible_clause_internal() checked that the arguments
of a ScalarArrayOpExpr are one Var and one Const, but it would allow
cases where the Const was on the left. Subsequent uses of the clause
are not expecting that and would suffer assertion failures or core
dumps. mcv.c also had not bothered to cope with the case of a NULL
array constant, which seems really unacceptably sloppy of somebody.
(Although our tools failed us there too, since AFAIK neither Coverity
nor any compiler warned of the obvious use-of-uninitialized-variable
condition.) It seems best to handle that by having
statext_is_compatible_clause_internal() reject it.
Noted while fixing bug #17570. Back-patch to v13 where the
extended stats code grew some awareness of ScalarArrayOpExpr.
Commit a4d75c86b improved the extended-stats logic to allow extended
stats to be collected on expressions not just bare Vars. To apply
such stats, we first verify that the user has permissions to read all
columns used in the stats. (If not, the query will likely fail at
runtime, but the planner ought not do so.) That had to get extended
to check permissions of columns appearing within such expressions,
but the code for that was completely wrong: it applied pull_varattnos
to the wrong pointer, leading to "unrecognized node type" failures.
Furthermore, although you couldn't get to this because of that bug,
it failed to account for the attnum offset applied by pull_varattnos.
This escaped recognition so far because the code in question is not
reached when the user has whole-table SELECT privilege (which is the
common case), and because only subexpressions not specially handled
by statext_is_compatible_clause_internal() are at risk.
I think a large part of the reason for this bug is under-documentation
of what statext_is_compatible_clause() is doing and what its arguments
are, so do some work on the comments to try to improve that.
Per bug #17570 from Alexander Kozhemyakin. Patch by Richard Guo;
comments and other cosmetic improvements by me. (Thanks also to
Japin Li for diagnosis.) Back-patch to v14 where the bug came in.
Discussion: https://postgr.es/m/17570-f2f2e0f4bccf0965@postgresql.org
Having additional triggers in a test table made the ORDER BY clauses in
old queries underspecified. Add another column there for stability.
Per sporadic buildfarm pink.
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
getrlimit() is in SUSv2 and all targeted systems have it.
Windows doesn't have it. We could just use #ifndef WIN32, but for a
little more explanation about why we're making things conditional, let's
retain the HAVE_GETRLIMIT macro. It's defined in port.h for Unix systems.
On systems that have it, it's not necessary to test for RLIMIT_CORE,
RLIMIT_STACK or RLIMIT_NOFILE macros, since SUSv2 requires those and all
targeted systems have them. Also remove references to a pre-historic
alternative spelling of RLIMIT_NOFILE, and coding that seemed to believe
that Cygwin didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Adjusting this function was overlooked in commit 94aa7cc5f. The only
visible symptom (so far) is that INSERT ... ON CONFLICT could go into
an endless loop when inserting a null that has a conflict.
Richard Guo and Tom Lane, per bug #17558 from Andrew Kesper
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
Remove the test case added by commit fac1b470a, which never actually
worked to expose the problem it claimed to test. Replace it with
a case that does expose the problem, and also covers the SRF-not-
at-the-top deficiency repaired in 1aa8dad41.
Richard Guo, with some editorialization by me
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
The sto_using_cursor and sto_using_select tests were coded to exercise
every permutation of their test steps, but AFAICS there is no value in
exercising more than one. This matters because each permutation costs
about six seconds, thanks to the "pg_sleep(6)". Perhaps we could
reduce that, but the useless permutations seem worth getting rid of
in any case. (Note that sto_using_hash_index got it right already.)
While here, clean up some other sloppiness such as an unused table.
This doesn't make too much difference in interactive testing, since the
wasted time is typically masked by parallelization with other tests.
However, the buildfarm runs this as a serial step, which means we can
expect to shave ~40 seconds from every buildfarm run. That makes it
worth back-patching.
Discussion: https://postgr.es/m/2515192.1659454702@sss.pgh.pa.us
The TAP tests for logical replication in src/test/subscription are using
the following code in many places to make sure that the subscription is
synchronized with the publisher:
$node_publisher->wait_for_catchup('tap_sub');
$node_subscriber->poll_query_until('postgres',
qq[SELECT count(1) = 0
FROM pg_subscription_rel
WHERE srsubstate NOT IN ('r', 's')]);
The new function wait_for_subscription_sync() can be used to replace the
above code. This eliminates duplicated code and makes it easier to write
future tests.
Author: Masahiko Sawada
Reviewed by: Amit Kapila, Shi yu
Discussion: https://postgr.es/m/CAD21AoC-fvAkaKHa4t1urupwL8xbAcWRePeETvshvy80f6WV1A@mail.gmail.com
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
ORDER BY / DISTINCT aggreagtes have, since implemented in Postgres, been
executed by always performing a sort in nodeAgg.c to sort the tuples in
the current group into the correct order before calling the transition
function on the sorted tuples. This was not great as often there might be
an index that could have provided pre-sorted input and allowed the
transition functions to be called as the rows come in, rather than having
to store them in a tuplestore in order to sort them once all the tuples
for the group have arrived.
Here we change the planner so it requests a path with a sort order which
supports the most amount of ORDER BY / DISTINCT aggregate functions and
add new code to the executor to allow it to support the processing of
ORDER BY / DISTINCT aggregates where the tuples are already sorted in the
correct order.
Since there can be many ORDER BY / DISTINCT aggregates in any given query
level, it's very possible that we can't find an order that suits all of
these aggregates. The sort order that the planner chooses is simply the
one that suits the most aggregate functions. We take the most strictly
sorted variation of each order and see how many aggregate functions can
use that, then we try again with the order of the remaining aggregates to
see if another order would suit more aggregate functions. For example:
SELECT agg(a ORDER BY a),agg2(a ORDER BY a,b) ...
would request the sort order to be {a, b} because {a} is a subset of the
sort order of {a,b}, but;
SELECT agg(a ORDER BY a),agg2(a ORDER BY c) ...
would just pick a plan ordered by {a} (we give precedence to aggregates
which are earlier in the targetlist).
SELECT agg(a ORDER BY a),agg2(a ORDER BY b),agg3(a ORDER BY b) ...
would choose to order by {b} since two aggregates suit that vs just one
that requires input ordered by {a}.
Author: David Rowley
Reviewed-by: Ronan Dunklau, James Coleman, Ranier Vilela, Richard Guo, Tom Lane
Discussion: https://postgr.es/m/CAApHDvpHzfo92%3DR4W0%2BxVua3BUYCKMckWAmo-2t_KiXN-wYH%3Dw%40mail.gmail.com
The select_outer_pathkeys_for_merge function made an attempt to build the
merge join pathkeys in the same order as query_pathkeys. This was done as
it may have led to no sort being required for an ORDER BY or GROUP BY
clause in the upper planner. However, this restriction seems overly
strict as it required that we match the query_pathkeys entirely or we
don't bother putting the merge join pathkeys in that order.
Here we relax this rule so that we use a prefix of the query_pathkeys
providing that prefix matches all of the join quals. This may provide the
upper planner with partially sorted input which will allow the use of
incremental sorts instead of full sorts.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvrtZu0PHVfDPFM4Yx3jNR2Wuwosv+T2zqa7LrhhBr2rRg@mail.gmail.com
This commit adds some test coverage for ee79647 (prevent BASE_BACKUP
from running in the middle of another base backup) and b24b2be
(BASE_BACKUP cancellation followed by pg_backup_start), caused by the
interactions of replication and SQL commands in a logical replication
connection in a WAL sender.
The second test uses a design close to what has been introduced in
0475a97f, where BASE_BACKUP is throttled to give enough room for a
cancellation, though this time we rely on psql with multiple -c
switches to keep a connection around for the second query.
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/Ys/NCI4Eo9300GnQ@paquier.xyz
In the short time this function has existed, it's already proven to be
a nontrivial maintenance burden, since it has to be updated whenever a
node tag is added or removed. Although in principle we could now
automate that, I see little justification for having such functionality
here at all. The function is only being applied to utility statements,
for which we already have infrastructure for obtaining string names.
Moreover, that infrastructure produces already-familiar-to-users names,
unlike nodetag_to_string().
So, remove this function and use the existing infrastructure instead.
That saves over a thousand lines of largely-unreachable code.
Back-patch to v15 where this code came in. Although it seems unlikely
that v15's nodetag list will change anymore, we might as well keep the
two branches looking and acting alike; otherwise back-patching any
test-results changes in this area will be painful.
Discussion: https://postgr.es/m/843818.1659218928@sss.pgh.pa.us
The code tried to access ARR_DIMS(v)[0] and ARR_LBOUND(v)[0]
whether or not those values exist. This made the range check
on the "n" argument unstable --- it might or might not fail, and
if it did it would report garbage for the allowed upper limit.
These bogus accesses would probably annoy Valgrind, and if you
were very unlucky even lead to SIGSEGV.
Report and fix by Martin Kalcher. Back-patch to v14 where this
function was added.
Discussion: https://postgr.es/m/baaeb413-b8a8-4656-5757-ef347e5ec11f@aboutsource.net
These flavors of ALTER TABLE were already shaped to report the
ObjectAddress of the partition attached or detached, but this data was
not added to what is collected for event triggers. The tests of
test_ddl_deparse are updated to show the modification in the data
reported.
Author: Hou Zhijie
Reviewed-by: Álvaro Herrera, Amit Kapila, Hayato Kuroda, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB571626984BD099DADF53F38394899@OS0PR01MB5716.jpnprd01.prod.outlook.com
This module is expanded to track the description of the objects changed
in the subcommands of ALTER TABLE by reworking the function
get_altertable_subcmdtypes() (now named get_altertable_subcmdinfo) used
in the event trigger of the test. It now returns a set of rows made of
(subcommand type, object description) instead of a text array with only
the information about the subcommand type.
The tests have been lacking a lot of the subcommands added to
AlterTableType over the years. All the missing subcommands are added,
and the code is now structured so as the addition of a new subcommand
is detected by removing the default clause used in the switch for the
subcommand types.
The coverage of the module is increased from roughly 30% to 50%. More
could be done but this is already a nice improvement.
Author: Michael Paquier, Hou Zhijie
Reviewed-by: Álvaro Herrera, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/OS0PR01MB571626984BD099DADF53F38394899@OS0PR01MB5716.jpnprd01.prod.outlook.com
It's allowed for an installation to remove postgresql.auto.conf,
so don't rely on that being present. Instead probe whether we can
read postmaster.pid. (If you've removed that, you broke the data
directory's multiple-postmaster interlock, not to mention pg_ctl.)
Per gripe from Michael Paquier.
Discussion: https://postgr.es/m/YuSZTsoBMObyY+vT@paquier.xyz
The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
There wasn't an especially nice way to read all of a file while
passing missing_ok = true. Add an additional overloaded variant
to support that use-case.
While here, refactor the C code to avoid a rats-nest of PG_NARGS
checks, instead handling the argument collection in the outer
wrapper functions. It's a bit longer this way, but far more
straightforward.
(Upon looking at the code coverage report for genfile.c, I was
impelled to also add a test case for pg_stat_file() -- tgl)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220607.160520.1984541900138970018.horikyota.ntt@gmail.com
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
As before, we start by prepending one underscore (truncating the
base name if necessary). But if there is a conflict, then instead of
prepending more and more underscores, append an underscore and some
digits, in much the same way that ChooseRelationName does. While
the previous logic could be driven to fail by creating a lot of
types with long names differing only near the end, this version seems
certain enough to eventually succeed that we can remove the failure
code path that was there before.
While at it, undo 6df7a9698's decision to split this code out of
makeArrayTypeName. That wasn't actually accomplishing anything,
because no other function was using it --- and it would have been
wrong to do so. The convention that a prefix "_" means an array,
not something else, is too ancient to mess with.
Andrey Lepikhov and Dmitry Koval, reviewed by Masahiko Sawada and myself
Discussion: https://postgr.es/m/b84cd82c-cc67-198a-8b1c-60f44e1259ad@postgrespro.ru
This addresses a couple of bugs in the REINDEX grammar, introduced by
83011ce:
- A name was never specified for DATABASE/SYSTEM, even if the query
included one. This caused such REINDEX queries to always work with any
object name, but we should complain if the object name specified does
not match the name of the database we are connected to. A test is added
for this case in the main regression test suite, provided by Álvaro.
- REINDEX SYSTEM CONCURRENTLY [name] was getting rejected in the
parser. Concurrent rebuilds are not supported for catalogs but the
error provided at execution time is more helpful for the user, and
allowing this flavor results in a simplification of the parsing logic.
- REINDEX DATABASE CONCURRENTLY was rebuilding the index in a
non-concurrent way, as the option was not being appended correctly in
the list of DefElems in ReindexStmt (REINDEX (CONCURRENTLY) DATABASE was
working fine. A test is added in the TAP tests of reindexdb for this
case, where we already have a REINDEX DATABASE CONCURRENTLY query
running on a small-ish instance. This relies on the work done in
2cbc3c1 for SYSTEM, but here we check if the OIDs of the index relations
match or not after the concurrent rebuild. Note that in order to get
this part to work, I had to tweak the tests so as the index OID and
names are saved separately. This change not affect the reliability or
of the coverage of the existing tests.
While on it, I have implemented a tweak in the grammar to reduce the
parsing by one branch, simplifying things even more.
Author: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/YttqI6O64wDxGn0K@paquier.xyz
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
Commit e2f65f425 added contrib/pg_prewarm to the prerequisites for
running the src/test/recovery suite, but did not bother to update
the documentation about that.
The dependency logic failed to register a column-level dependency
when a view or rule contains a reference to a specific column of
the result of a function-returning-composite. That meant you could
drop the column from the composite type, causing trouble for future
executions of the view. We've known about this for years, but never
summoned the energy to actually fix it, instead installing various
low-level defenses to prevent crashing on references to dropped columns.
We had to do that to plug the hole in stable branches, where there might
be pre-existing broken references; but let's fix the root cause today.
To do that, add some logic (borrowed from get_rte_attribute_is_dropped)
to find_expr_references_walker, to check whether a Var referencing an
RTE_FUNCTION RTE is referencing a column of a composite type, and if
so add the proper dependency.
However ... it seems mighty unwise to remove said low-level defenses,
since there could be other bugs now or in the future that allow
reaching them. By the same token, letting those defenses go untested
seems unwise. Hence, rather than just dropping the associated test
cases, hack them to continue working by the expedient of manually
dropping the pg_depend entries that this fix installs.
Back-patch into v15. I don't want to risk changing this behavior
in stable branches, but it seems not too late for v15. (Since
we have already forced initdb for beta3, we can be sure that all
production v15 installations will have these added dependencies.)
Discussion: https://postgr.es/m/182492.1658431155@sss.pgh.pa.us
Tom Lane
Michael Paquier
Amit Kapila
Thomas Munro
Alvaro Herrera
Daniel Gustafsson
John Naylor
David Rowley
Andrew Dunstan