Warn_restart has been set by the backend main loop. This means that
elog(ERROR) or elog(FATAL) in the postmaster or during backend startup
now have well-defined behavior: proc_exit() rather than coredump.
In the case of elog() inside the postmaster, I think that proc_exit()
is probably not enough --- don't we want our child backends to be
forced to quit too? But I don't understand Vadim's recent changes in
this area, so I'll leave it to him to look over and tweak if needed.
subselects can only appear on the righthand side of a binary operator.
That's still true for quantified predicates like x = ANY (SELECT ...),
but a subselect that delivers a single result can now appear anywhere
in an expression. This is implemented by changing EXPR_SUBLINK sublinks
to represent just the (SELECT ...) expression, without any 'left hand
side' or combining operator --- so they're now more like EXISTS_SUBLINK.
To handle the case of '(x, y, z) = (SELECT ...)', I added a new sublink
type MULTIEXPR_SUBLINK, which acts just like EXPR_SUBLINK used to.
But the grammar will only generate one for a multiple-left-hand-side
row expression.
circumstances:
=> select * from foo\x\t\pset border 0 \p\g\\select * from bar;
Also the release prep update so the sql_help.h is generated before
packaging.
Peter.
nulls with non-nulls using proper three-valued boolean logic. Also clean
up ExecQual to make it clearer that ExecQual *does* follow the SQL spec
for boolean nulls. See '[BUGS] (null) != (null)' thread around 10/26/99
for more detail.
* Add use of 'const' for varibles in source tree
(which is misspelled, btw.)
I went through the front-end libpq code and did so. This affects in
particular the various accessor functions (such as PQdb() and
PQgetvalue()) as well as, by necessity, the internal helpers they use.
I have been really thorough in that regard, perhaps some people will find
it annoying that things like
char * foo = PQgetvalue(res, 0, 0)
will generate a warning. On the other hand it _should_ generate one. This
is no real compatibility break, although a few clients will have to be
fixed to suppress warnings. (Which again would be in the spirit of the
above TODO.)
In addition I replaced some int's by size_t's and removed some warnings
(and generated some new ones -- grmpf!). Also I rewrote PQoidStatus (so it
actually honors the const!) and supplied a new function PQoidValue that
returns a proper Oid type. This is only front-end stuff, none of the
communicaton stuff was touched.
The psql patch also adds some new consts to honor the new libpq situation,
as well as fixes a fatal condition that resulted when using the -V
(--version) option and there is no database listening.
So, to summarize, the psql you should definitely put in (with or without
the libpq). If you think I went too far with the const-mania in libpq, let
me know and I'll make adjustments. If you approve it, I will also update
the docs.
-Peter
--
Peter Eisentraut Sernanders vaeg 10:115
Now indexes of pg_class and pg_type are unique indexes
and guarantee the uniqueness of correponding attributes.
heap_create() was changed to take another boolean parameter
which allows to postpone the creation of disk file.
The name of rd_nonameunlinked was changed to rd_unlinked.
It is used generally(not only for noname relations) now.
Requires initdb.
Apparently, back in the dim reaches of prehistory, the parser couldn't
be trusted to label Const nodes with the correct constbyval value ...
and someone preferred to patch around this in copyObject rather than
fix the problem at the source. The problem is long gone, but the hack
lingered on. Until now.
in the TupleDesc that the caller already has (for call from ExecMain) or
can make just as easily as ExecInitJunkFilter() can (for call from
ExecAppend). Also, don't bother to build a junk filter for an INSERT
operation that doesn't actually need one, which is the normal case.
In particular, don't bother to look up type information for attributes
where we're not actually going to use it, and avoid copying entire tlist
structure when it's not necessary.
during initial run formation by keeping both current run and next-run
tuples in the same heap (yup, Knuth is smarter than I am). And, during
merge passes, make use of available sort memory to load multiple tuples
from any one input 'tape' at a time, thereby improving locality of
access to the temp file.
before calling execProject, when the outerPlan has returned zero tuples.
I took this out under the mistaken impression that the input tuple
couldn't be referenced by execProject if we weren't in GROUP BY mode.
But it can, if we're in an UPDATE or DELETE...
One, it now returns the previous hook. That way people don't have to dig
around in libpq-int.h for that information anymore. It previously
returned void, so there should be no incompatibilities.
Second, you cannot set the callback to NULL anymore. (Of course you can
still call it with NULL just to get the current hook.) The way libpq uses
the callback pointer, having a NULL there wasn't very healthy.
Peter Eisentraut
The following patch extends the COMMENT ON functionality to the
rest of the database objects beyond just tables, columns, and views. The
grammer of the COMMENT ON statement now looks like:
COMMENT ON [
[ DATABASE | INDEX | RULE | SEQUENCE | TABLE | TYPE | VIEW ] <objname>
|
COLUMN <relation>.<attribute> |
AGGREGATE <aggname> <aggtype> |
FUNCTION <funcname> (arg1, arg2, ...) |
OPERATOR <op> (leftoperand_typ rightoperand_typ) |
TRIGGER <triggername> ON relname>
Mike Mascari
(mascarim@yahoo.com)
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
when an initdb-forcing change has been applied within a development cycle.
PG_VERSION serves this purpose for official releases, but we can't bump
the PG_VERSION number every time we make a change to the catalogs during
development. Instead, increase the catalog version number to warn other
developers that you've made an incompatible change. See my mail to
pghackers for more info.
fix recently applied to backend's lexer). I see that YY_USES_REJECT
still gets defined for this lexer, which means it's going to have trouble
parsing really long tokens. Not sure if it's worth doing anything about
that or not; I don't have the interest right now to understand why
ecpg's additions to the syntax cause this problem...
This patch fix a TODO list item.
* require SELECT DISTINCT target list to have all ORDER BY columns
example
ogawa=> select distinct x from t1 order by y;
ERROR: ORDER BY columns must appear in SELECT DISTINCT target list
---
Atsushi Ogawa
boundary-condition bug in myinput() which caused flex scanner to fail
on tokens larger than a bufferload. Turns out flex doesn't want null-
terminated input ... and if it gives you a 1-character buffer, you'd
better supply a character, not a null, lest you be thought to be
reporting end of input.
proc_exit time. I discovered that if the frontend closes the connection
when you're inside a transaction block, there is nothing ensuring that
temp files go away ... I wonder whether proc_exit ought to try to do an
explicit transaction abort?
a generalized module 'tuplesort.c' that can sort either HeapTuples or
IndexTuples, and is not tied to execution of a Sort node. Clean up
memory leakages in sorting, and replace nbtsort.c's private implementation
of mergesorting with calls to tuplesort.c.
recycle storage within sort temp file on a block-by-block basis. This
reduces peak disk usage to essentially just the volume of data being
sorted, whereas it had been about 4x the data volume before.
>From the ORACLE 7 SQL Language Reference Manual:
-----------------------------------------------------
COMMENT
Purpose:
To add a comment about a table, view, snapshot, or
column into the data dictionary.
Prerequisites:
The table, view, or snapshot must be in your own
schema
or you must have COMMENT ANY TABLE system privilege.
Syntax:
COMMENT ON [ TABLE table ] |
[ COLUMN table.column] IS 'text'
You can effectively drop a comment from the database
by setting it to the empty string ''.
-----------------------------------------------------
Example:
COMMENT ON TABLE workorders IS
'Maintains base records for workorder information';
COMMENT ON COLUMN workorders.hours IS
'Number of hours the engineer worked on the task';
to drop a comment:
COMMENT ON COLUMN workorders.hours IS '';
The current patch will simply perform the insert into
pg_description, as per the TODO. And, of course, when
the table is dropped, any comments relating to it
or any of its attributes are also dropped. I haven't
looked at the ODBC source yet, but I do know from
an ODBC client standpoint that the standard does
support the notion of table and column comments.
Hopefully the ODBC driver is already fetching these
values from pg_description, but if not, it should be
trivial.
Hope this makes the grade,
Mike Mascari
(mascarim@yahoo.com)
BufFile so that it handles multi-segment temporary files transparently.
This allows sorts and hashes to work with data exceeding 2Gig (or whatever
the local limit on file size is). Change psort.c to use relative seeks
instead of absolute seeks for backwards scanning, so that it won't fail
when the data volume exceeds 2Gig.
I have changed a bit the makefiles for the win32 port - the *.def files
(created when building shared libraries) are now clean from
Makefile.shlib.
I have also removed "-g" from CFLAGS in the "cygwin32" template - it can
be
enabled when running configure.
Dan
database, but they get truncated at the first NUL by lo_read
when they are read back. The reason for this is that lo_read in
Pg.xs is using the default:
OUTPUT:
RETVAL
buf
which uses C's strlen() to work out the length of the scalar.
The code ought to read something more like:
OUTPUT:
RETVAL
buf sv_setpvn((SV*)ST(2), buf, RETVAL);
I am not sure if this needs to be done on both lo_read methods
in this file, but I changed both and have not since had any
problems with truncated BLOBs.
Douglas Thomson <dougt@mugc.cc.monash.edu.au>
Cygwin snapshots (tested on 990115 which is recommended to use - it fixes
some errors in B20.1)
And I have another patch for including <sys/ipc.h> before <sys/sem.h> in
backend/storage/lmgr/proc.c - it is required due the design of cygipc
headers
Dan
mentioned in FROM but not elsewhere in the query: such tables should be
joined over anyway. Aside from being more standards-compliant, this allows
removal of some very ugly hacks for COUNT(*) processing. Also, allow
HAVING clause without aggregate functions, since SQL does. Clean up
CREATE RULE statement-list syntax the same way Bruce just fixed the
main stmtmulti production.
CAUTION: addition of a field to RangeTblEntry nodes breaks stored rules;
you will have to initdb if you have any rules.
quite the same way that transformInsertStatement does, so that an expression
could be accepted by CREATE TABLE and then fail when used. Also, put back
check that CONSTRAINT expressions must yield boolean...
expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
--enable-debug adds -g (unconditionally)
--disable-debug removes -g (if it was already in there somehow)
(giving neither does nothing)
Since none of the templates default CFLAGS with a -g you're not likely
to
end up with two -g flags. Not that they'd hurt though.
It doesn't do anything about C++.
Peter Eisentraut
not just C, so that ISCACHABLE attribute can be specified for user-defined
functions. Get rid of ParamString node type, which wasn't actually being
generated by gram.y anymore, even though define.c thought that was what
it was getting. Clean up minor bug in dfmgr.c (premature heap_close).
modifyAggrefQual. This routine really, really needs to be retired, but
until we have subselects in FROM there's no chance of doing the job right.
In the meantime try to respond to unhandlable cases with elog rather than
coredump.
in the Expr nodes they produce. This fixes a few cases of errors like
'typeidTypeRelid: Invalid type - oid = 0' caused by calling parser-related
routines on expression trees that have already been processed by planner-
related routines.
they have no hardwired limit on the length of a rule's text. Fix a couple
of minor bugs in passing --- deparsed UPDATE queries didn't have quotes
around relation name, and quotes and backslashes in constant values weren't
backslash-quoted.
expression_tree_mutator rather than ad-hoc tree walking code. This shortens
the code materially and fixes a fair number of sins of omission. Also,
change modifyAggrefQual to *not* recurse into subselects, since its mission
is satisfied if it removes aggregate functions from the top level of a
WHERE clause. This cures problems with queries of the form SELECT ...
WHERE x IN (SELECT ... HAVING something-using-an-aggregate), which would
formerly get mucked up by modifyAggrefQual. The routine is still
fundamentally broken, of course, but I don't think there's any way to get
rid of it before we implement subselects in FROM ...
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
functions. One problem that I have encountered with the function
manager is that it does not allow the user to define type conversion
functions that convert between user types. For instance if mytype1,
mytype2, and mytype3 are three Postgresql user types, and if I wish to
define Postgresql conversion functions like
I run into problems, because the Postgresql dynamic loader would look
for a single link symbol, mytype3, for both pieces of object code. If
I just change the name of one of the Postgresql functions (to make the
symbols distinct), the automatic type conversion that Postgresql uses,
for example, when matching operators to arguments no longer finds the
type conversion function.
The solution that I propose, and have implemented in the attatched
patch extends the CREATE FUNCTION syntax as follows. In the first case
above I use the link symbol mytype2_to_mytype3 for the link object
that implements the first conversion function, and define the
Postgresql operator with the following syntax
The patch includes changes to the parser to include the altered
syntax, changes to the ProcedureStmt node in nodes/parsenodes.h,
changes to commands/define.c to handle the extra information in the AS
clause, and changes to utils/fmgr/dfmgr.c that alter the way that the
dynamic loader figures out what link symbol to use. I store the
string for the link symbol in the prosrc text attribute of the pg_proc
table which is currently unused in rows that reference dynamically
loaded
functions.
Bernie Frankpitt
an empty targetlist *and* fails to return any tuples, as will happen
for example with 'SELECT COUNT(1) FROM table WHERE ...' if the where-
clause selects no tuples. It's so nice to make a fix by diking out code,
instead of adding more...
behavior as it was, apart from forbidding minus-terminated
operators. Seems that I have to break the habit of doing before
thinking properly :-/ The point is that my second patch breaks
constructs like a & b or a ! b. This patch is to be applied
instead of any of two other today's patches.
Leon
Two patches included:
- the first one enables the use of bool variables in fields which might
become NULL.
Up to now the lib told you that NULL is not a bool variable, even if
you provide a indicator.
- the second patch checks whether a value is null and issues an error if
no indicator is provided.
Sidenote: IIRC, the variable should be left alone if the value is NULL.
ECPGlib sets it's value to 0 on NULL. Is this a violation of the
standard?
Regards
Christof
is used to find start scan position of Indexscan-s.
To speed up finding scan start position,I have changed
_bt_first() to use as many keys as possible.
I'll attach the patch here.
Regards.
Hiroshi Inoue
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
with no input rows, per pghackers discussions around 7/22/99. Clean up
a bunch of ugly coding while at it; remove redundant re-lookup of
aggregate info at start of each new GROUP. Arrange to pfree intermediate
values when they are pass-by-ref types, so that aggregates on pass-by-ref
types no longer eat memory. This takes care of a couple of TODO items...
Frankpitt, plus some improvements from yours truly. The simplifier depends
on the proiscachable field of pg_proc to tell it whether a function is
safe to pre-evaluate --- things like nextval() are not, for example.
Update pg_proc.h to contain reasonable cacheability information; as of
6.5.* hardly any functions were marked cacheable. I may have erred too
far in the other direction; see recent mail to pghackers for more info.
This update does not force an initdb, exactly, but you won't see much
benefit from the simplifier until you do one.
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
now that sequence names are properly quoted for field defaults, mixed
case sequence names are generated. These are properly quoted in the
CREATE SEQUENCE lines, but not in the SELECT nextval lines, as per
below:
CREATE SEQUENCE "Teams_TeamID_seq" start 10 increment 1 maxvalue
2147483647 minvalue 1 cache 1 ;
SELECT nextval ('Teams_TeamID_seq');
This needs to be:
SELECT nextval ('"Teams_TeamID_seq"');
Patch included below.
--
Ross J. Reedstrom, Ph.D., <reedstrm@rice.edu>
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
See attached mail for more details.
-------------------------------------------------------------------
From: "Vadim Mikheev" <vadim@krs.ru>
To: "Hiroshi Inoue" <Inoue@tpf.co.jp>
References: <000201befa94$42fe04c0$2801007e@cadzone.tpf.co.jp>
Subject: Re: elog(ERROR) in vacuum
Date: Fri, 10 Sep 1999 10:27:10 +0900
Organization: OJSC Rostelecom (Krasnoyarsk)
Message-ID: <37D85E6E.5AFA126D@krs.ru>
Hiroshi Inoue wrote:
>
> Hello Vadim,
>
> I have a question about vacuum.
>
> VACUUM has a phase like commit which calls TransactionIdCommit().
> But if elog(ERROR) occured after that,the status of transaction is
> changed from XID_COMMIT to XID_ABORT.
>
> Seems to me this causes inconsistency.
> Shoudn't AbortTransaction() be changed not to call TransacionIdAbort()
> in case of vacuum.
You're right!
As usual -:)
Vadim
Bruce Momjian
Jan Wieck
Tom Lane
Tatsuo Ishii
Hiroshi Inoue
Michael Meskes
Byron Nikolaidis
Vadim B. Mikheev
Marc G. Fournier
Peter Mount
Thomas G. Lockhart