~> (cube, int) operator was especially designed for knn-gist search.
However, knn-gist supports only ascending ordering of results. Nevertheless
it would be useful to support descending ordering by ~> (cube, int) operator.
We provide workaround for that: negative coordinate give us inversed value
of corresponding cube bound. Therefore, knn search using negative coordinate
gives us an effect of descending ordering by cube bound.
Author: Alexander Korotkov
Reviewed by: Tomas Vondra, Andrey Borodin
Discussion: https://www.postgresql.org/message-id/flat/a9657f6a-b497-36ff-e56-482a2c7e3292@2ndquadrant.com
~> (cube, int) operator was especially designed for knn-gist search.
However, it appears that knn-gist search can't work correctly with current
behavior of this operator when dataset contains cubes of variable
dimensionality. In this case, the same value of second operator argument
can point to different dimension depending on dimensionality of particular cube.
Such behavior is incompatible with gist indexing of cubes, and knn-gist doesn't
work correctly for it.
This patch changes behavior of ~> (cube, int) operator by introducing dimension
numbering where value of second argument unambiguously identifies number of
dimension. With new behavior, this operator can be correctly supported by
knn-gist. Relevant changes to cube operator class are also included.
Backpatch to v9.6 where operator was introduced.
Since behavior of ~> (cube, int) operator is changed, depending entities
must be refreshed after upgrade. Such as, expression indexes using this
operator must be reindexed, materialized views must be rebuilt, stored
procedures and client code must be revised to correctly use new behavior.
That should be mentioned in release notes.
Noticed by: Tomas Vondra
Author: Alexander Korotkov
Reviewed by: Tomas Vondra, Andrey Borodin
Discussion: https://www.postgresql.org/message-id/flat/a9657f6a-b497-36ff-e56-482a2c7e3292@2ndquadrant.com
These functions are stated to be Oracle-compatible, but they weren't.
Yugo Nagata noticed that while our code returns zero for a zero or
negative fourth parameter (occur_index), Oracle throws an error.
Further testing by me showed that there was also a discrepancy in the
interpretation of a negative third parameter (beg_index): Oracle thinks
that a negative beg_index indicates the last place where the target
substring can *begin*, whereas our code thinks it is the last place
where the target can *end*.
Adjust the sample code to behave like Oracle in both these respects.
Also change it to be a CDATA[] section, simplifying copying-and-pasting
out of the documentation source file. And fix minor problems in the
introductory comment, which wasn't very complete or accurate.
Back-patch to all supported branches. Although this patch only touches
documentation, we should probably call it out as a bug fix in the next
minor release notes, since users who have adopted the functions will
likely want to update their versions.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20171229191705.c0b43a8c.nagata@sraoss.co.jp
These are compatible with Oracle and required for the datetime template
language for jsonpath in an upcoming patch.
Nikita Glukhov and Andrew Dunstan, reviewed by Pavel Stehule.
Added:
- variable now might contain integer, double, boolean and null values
- functions ln, exp
- logical AND/OR/NOT
- bitwise AND/OR/NOT/XOR
- bit right/left shift
- comparison operators
- IS [NOT] (NULL|TRUE|FALSE)
- conditional choice (in form of when/case/then)
New operations and functions allow to implement more complicated test scenario.
Author: Fabien Coelho with minor editorization by me
Reviewed-By: Pavel Stehule, Jeevan Ladhe, me
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.10.1604030742390.31618@sto
This adds a second standard channel binding type for SCRAM. It is
mainly intended for third-party clients that cannot implement
tls-unique, for example JDBC.
Author: Michael Paquier <michael.paquier@gmail.com>
While ldaptls=1 provides an RFC 4513 conforming way to do LDAP
authentication with TLS encryption, there was an earlier de facto
standard way to do LDAP over SSL called LDAPS. Even though it's not
enshrined in a standard, it's still widely used and sometimes required
by organizations' network policies. There seems to be no reason not to
support it when available in the client library. Therefore, add support
when using OpenLDAP 2.4+ or Windows. It can be configured with
ldapscheme=ldaps or ldapurl=ldaps://...
Add tests for both ways of requesting LDAPS and a test for the
pre-existing ldaptls=1. Modify the 001_auth.pl test for "diagnostic
messages", which was previously relying on the server rejecting
ldaptls=1.
Author: Thomas Munro
Reviewed-By: Peter Eisentraut
Discussion: https://postgr.es/m/CAEepm=1s+pA-LZUjQ-9GQz0Z4rX_eK=DFXAF1nBQ+ROPimuOYQ@mail.gmail.com
Polygon opclass uses compress method feature of SP-GiST added earlier. For now
it's a single operator class which uses this feature. SP-GiST actually indexes
a bounding boxes of input polygons, so part of supported operations are lossy.
Opclass uses most methods of corresponding opclass over boxes of SP-GiST and
treats bounding boxes as point in 4D-space.
Bump catalog version.
Authors: Nikita Glukhov, Alexander Korotkov with minor editorization by me
Reviewed-By: all authors + Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/54907069.1030506@sigaev.ru
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
This parameter can be used to enforce the channel binding type used
during a SCRAM authentication. This can be useful to check code paths
where an invalid channel binding type is used by a client and will be
even more useful to allow testing other channel binding types when they
are added.
The default value is tls-unique, which is what RFC 5802 specifies.
Clients can optionally specify an empty value, which has as effect to
not use channel binding and use SCRAM-SHA-256 as chosen SASL mechanism.
More tests for SCRAM and channel binding are added to the SSL test
suite.
Author: Author: Michael Paquier <michael.paquier@gmail.com>
Remove the designation that Flex is a GNU package. Even though Bison is
a GNU package, leave out the designation to not make the sentence
unnecessarily complicated.
Author: Pavan Maddamsetti <pavan.maddamsetti@gmail.com>
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
Hopefully, the additional logging will help avoid confusion that
could otherwise result.
Nathan Bossart, reviewed by Michael Paquier, Fabrízio Mello, and me
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Discussion: https://postgr.es/m/20170514150525.0346ba72@postgrespro.ru
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
wal_receiver_timeout, wal_receiver_status_interval and
wal_retrieve_retry_interval configuration parameters affect the logical rep
worker, but previously only wal_receiver_status_interval was not mentioned
as such parameter in the doc.
Back-patch to v10 where logical rep was added.
Author: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CAD21AoBUnuH_UsnKXyPCsCR7EAMamW0sSb6a7=WgiQRpnMAp5w@mail.gmail.com
pgbench can skip some transactions when both -R and -L options are used.
Previously, this resulted in slightly silly statistics both in progress
reports and final output, because the skipped transactions were counted
as executed for TPS and related stats. Discount skipped xacts in TPS
numbers, and also when figuring the percentage of xacts exceeding the
latency limit.
Also, don't print per-script skipped-transaction counts when there is
only one script. That's redundant with the overall count, and it's
inconsistent with the fact that we don't print other per-script stats
when there's only one script. Clean up some unnecessary interactions
between what should be independent options that were due to that
decision.
While at it, avoid division-by-zero in cases where no transactions were
executed. While on modern platforms this would generally result in
printing "NaN" rather than a crash, that isn't spelled consistently
across platforms and it would confuse many people. Skip the relevant
output entirely when practical, else print zeroes.
Fabien Coelho, reviewed by Steve Singer, additional hacking by me
Discussion: https://postgr.es/m/26654.1505232433@sss.pgh.pa.us
Previously, any attempt to request a 3.x protocol version other than
3.0 would lead to a hard connection failure, which made the minor
protocol version really no different from the major protocol version
and precluded gentle protocol version breaks. Instead, when the
client requests a 3.x protocol version where x is greater than 0, send
the new NegotiateProtocolVersion message to convey that we support
only 3.0. This makes it possible to introduce new minor protocol
versions without requiring a connection retry when the server is
older.
In addition, if the startup packet includes name/value pairs where
the name starts with "_pq_.", assume that those are protocol options,
not GUCs. Include those we don't support (i.e. all of them, at
present) in the NegotiateProtocolVersion message so that the client
knows they were not understood. This makes it possible for the
client to request previously-unsupported features without bumping
the protocol version at all; the client can tell from the server's
response whether the option was understood.
It will take some time before servers that support these new
facilities become common in the wild; to speed things up and make
things easier for a future 3.1 protocol version, back-patch to all
supported releases.
Robert Haas and Badrul Chowdhury
Discussion: http://postgr.es/m/BN6PR21MB0772FFA0CBD298B76017744CD1730@BN6PR21MB0772.namprd21.prod.outlook.com
Discussion: http://postgr.es/m/30788.1498672033@sss.pgh.pa.us
This code evidently intended to treat backslash as an escape character
within double-quoted substrings, but it was sufficiently confused that
cases like ..."foo\\"... did not work right: the second backslash
managed to quote the double-quote after it, despite being quoted itself.
Rewrite to get that right, while preserving the existing behavior
outside double-quoted substrings, which is that backslash isn't special
except in the combination \".
Comparing to Oracle, it seems that their version of to_char() for
timestamps allows literal alphanumerics only within double quotes, while
non-alphanumerics are allowed outside quotes; backslashes aren't special
anywhere; there is no way at all to emit a literal double quote.
(Bizarrely, their to_char() for numbers is different; it doesn't allow
literal text at all AFAICT.) The fact that they don't treat backslash
as special justifies our existing behavior for backslash outside double
quotes. I considered making backslash inside double quotes act the same
way (ie, special only if before "), which in a green field would be a
more consistent behavior. But that would likely break more existing SQL
code than what this patch does.
Add some test cases illustrating this behavior. (Only the last new
case actually changes behavior in this commit.)
Little of this behavior was documented, either, so fix that.
Discussion: https://postgr.es/m/3626.1510949486@sss.pgh.pa.us
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Non-data template patterns would consume characters whether or not those
characters were what the pattern expected, for example
SELECT TO_NUMBER('1234', '9,999');
produced 134 because the '2' got eaten by the comma pattern. This seems
undesirable, not least because it doesn't happen in Oracle. For the ','
and 'G' template patterns, we can fix this by consuming characters only
if they match what the pattern would output. For non-data patterns such
as 'L' and 'TH', it seems impractical to tighten things up to the point of
consuming only exact matches to what the pattern would output; but we can
improve matters quite a lot by redefining the behavior as "consume only
characters that aren't digits, signs, decimal point, or comma".
Also, fix it so that the behavior is to consume the number of *characters*
the pattern would output, not the number of *bytes*. The old coding would
do surprising things with non-ASCII currency symbols, for example. (It
would be good to apply that rule for literal text as well, but this commit
only fixes it for non-data patterns.)
Oliver Ford, reviewed by Thomas Munro and Nathan Wagner, and whacked around
a bit more by me
Discussion: https://postgr.es/m/CAGMVOdvpbMqPf9XWNzOwBpzJfErkydr_fEGhmuDGa015z97mwg@mail.gmail.com
Commit 5ecc0d738 removed the hard-wired superuser checks in lo_import
and lo_export in favor of protecting them with SQL permissions, but
failed to adjust the documentation to match. Fix that, and add a
<caution> paragraph pointing out the nontrivial security hazards
involved with actually granting such permissions. (It's still better
than ALLOW_DANGEROUS_LO_FUNCTIONS, though.)
Also, commit ae20b23a9 caused large object read/write privilege to
be checked during lo_open() rather than in the actual read or write
calls. Document that.
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
This feature caters to specialized use-cases such as running the normal
pgbench scenario with nonstandard indexes, or inserting other actions
between steps of the initialization sequence. The normal sequence of
initialization actions is broken down into half a dozen steps which can
be executed in a user-specified order, to the extent to which that's
sensible. The actions themselves aren't changed, except to make them
more robust against nonstandard uses:
* all four tables are now dropped in one DROP command, to reduce
assumptions about what foreign key relationships exist;
* all four tables are now truncated at the start of the data load
step, for consistency;
* the foreign key creation commands now specify constraint names, to
prevent accidentally creating duplicate constraints by executing the
'f' step twice.
Make some cosmetic adjustments in the messages emitted by pgbench
so that it's clear which steps are getting run, and so that the
messages agree with the documented names of the steps.
In passing, fix failure to enforce that the -v option is used only
in benchmarking mode.
Masahiko Sawada, reviewed by Fabien Coelho, editorialized a bit by me
Discussion: https://postgr.es/m/CAD21AoCsz0ZzfCFcxYZ+PUdpkDd5VsCSG0Pre_-K1EgokCDFYA@mail.gmail.com
Hash partitioning is useful when you want to partition a growing data
set evenly. This can be useful to keep table sizes reasonable, which
makes maintenance operations such as VACUUM faster, or to enable
partition-wise join.
At present, we still depend on constraint exclusion for partitioning
pruning, and the shape of the partition constraints for hash
partitioning is such that that doesn't work. Work is underway to fix
that, which should both improve performance and make partitioning
pruning work with hash partitioning.
Amul Sul, reviewed and tested by Dilip Kumar, Ashutosh Bapat, Yugo
Nagata, Rajkumar Raghuwanshi, Jesper Pedersen, and by me. A few
final tweaks also by me.
Discussion: http://postgr.es/m/CAAJ_b96fhpJAP=ALbETmeLk1Uni_GFZD938zgenhF49qgDTjaQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>