This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns. Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure. This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE. Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.
Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code). Back-patch to 9.0.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
This is advantageous first because it allows us to hash the smaller table
regardless of the outer-join type, and second because hash join can be more
flexible than merge join in dealing with arbitrary join quals in a FULL
join. For merge join all the join quals have to be mergejoinable, but hash
join will work so long as there's at least one hashjoinable qual --- the
others can be any condition. (This is true essentially because we don't
keep per-inner-tuple match flags in merge join, while hash join can do so.)
To do this, we need a has-it-been-matched flag for each tuple in the
hashtable, not just one for the current outer tuple. The key idea that
makes this practical is that we can store the match flag in the tuple's
infomask, since there are lots of bits there that are of no interest for a
MinimalTuple. So we aren't increasing the size of the hashtable at all for
the feature.
To write this without turning the hash code into even more of a pile of
spaghetti than it already was, I rewrote ExecHashJoin in a state-machine
style, similar to ExecMergeJoin. Other than that decision, it was pretty
straightforward.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
and related routines.
We already had a redundant FunctionCallInfoData struct in FuncExprState,
but were using that copy only in set-returning-function cases, to avoid
keeping function evaluation state in the expression tree for the benefit
of plpgsql's "simple expression" logic. But of course that didn't work
anyway. Given the recent fixes in plpgsql there is no need to have two
separate behaviors here. Getting rid of the local FunctionCallInfoData
structs should make things a little faster (because we don't need to do
InitFunctionCallInfoData each time), and it also makes for a noticeable
reduction in stack space consumption during recursive calls.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
peculiar variant of UNION ALL, and so wouldn't likely get written directly
as-is, it's possible for it to arise as a result of simplification of
less-obviously-silly queries. In particular, now that we can do flattening
of subqueries that have constant outputs and are underneath an outer join,
it's possible for the case to result from simplification of queries of the
type exhibited in bug #5263. Back-patch to 8.4 to avoid a functionality
regression for this type of query.
8.2beta but never carried out. This avoids repetitive tests of whether the
argument is of scalar or composite type. Also, be a bit more paranoid about
composite arguments in some places where we previously weren't checking.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
TupleTableSlot nodes. This eliminates the need to count in advance
how many Slots will be needed, which seems more than worth the small
increase in the amount of palloc traffic during executor startup.
The ExecCountSlots infrastructure is now all dead code, but I'll remove it
in a separate commit for clarity.
Per a comment from Robert Haas.
values before they get passed to the index access method. This avoids
repeated detoastings that will otherwise ensue as the comparison value
is examined by various index support functions. We have seen a couple of
reports of cases where repeated detoastings result in an order-of-magnitude
slowdown, so it seems worth adding a bit of extra logic to prevent this.
I had previously proposed trying to avoid duplicate detoastings in general,
but this fix takes care of what seems the most important case in practice
with very little effort or risk.
Back-patch to 8.4 so that the PostGIS folk won't have to wait a year to
have this fix in a production release. (The issue exists further back,
of course, but the code's diverged enough to make backpatching further a
higher-risk action. Also it appears that the possible gains may be limited
in prior releases because of different handling of lossy operators.)
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
for simple Var targetlist entries all the time, even when there are other
entries that are not simple Vars. Also, ensure that we prefetch attributes
(with slot_getsomeattrs) for all Vars in the targetlist, even those buried
within expressions. In combination these changes seem to significantly
reduce the runtime for cases where tlists are mostly but not exclusively
Vars. Per my proposal of yesterday.
distribution, by creating a special fast path for the (first few) most common
values of the outer relation. Tuples having hashvalues matching the MCVs
are effectively forced to be in the first batch, so that we never write
them out to the batch temp files.
Bryce Cutt and Ramon Lawrence, with some editorialization by me.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
bitmap. This is extracted from Greg Stark's posix_fadvise patch; it seems
worth committing separately, since it's potentially useful independently of
posix_fadvise.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
locate the target row, if the cursor was declared with FOR UPDATE or FOR
SHARE. This approach is more flexible and reliable than digging through the
plan tree; for instance it can cope with join cursors. But we still provide
the old code for use with non-FOR-UPDATE cursors. Per gripe from Robert Haas.
return the tableoid as well as the ctid for any FOR UPDATE targets that
have child tables. All child tables are listed in the ExecRowMark list,
but the executor just skips the ones that didn't produce the current row.
Curiously, this longstanding restriction doesn't seem to have been documented
anywhere; so no doc changes.
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
filter to be used when INSERT or SELECT INTO has a plan that returns raw
disk tuples. The virtual-tuple-slot optimizations that were put in place
awhile ago mean that ExecInsert has to do ExecMaterializeSlot, and that
already copies the tuple if it's raw (and does so more efficiently than
a junk filter, too). So get rid of that logic. This in turn means that
we can throw away ExecMayReturnRawTuples, which wasn't used for any other
purpose, and was always a kluge anyway.
In passing, move a couple of SELECT-INTO-specific fields out of EState
and into the private state of the SELECT INTO DestReceiver, as was foreseen
in an old comment there. Also make intorel_receive use ExecMaterializeSlot
not ExecCopySlotTuple, for consistency with ExecInsert and to possibly save
a tuple copy step in some cases.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
then-delete on the current cursor row. The basic fix is that nodeTidscan.c
has to apply heap_get_latest_tid() to the current-scan-TID obtained from the
cursor query; this ensures we get the latest row version to work with.
However, since that only works if the query plan is a TID scan, we also have
to hack the planner to make sure only that type of plan will be selected.
(Formerly, the planner might decide to apply a seqscan if the table is very
small. This change is probably a Good Thing anyway, since it's hard to see
how a seqscan could really win.) That means the execQual.c code to support
CurrentOfExpr as a regular expression type is dead code, so replace it with
just an elog(). Also, add regression tests covering these cases. Note
that the added tests expose the fact that re-fetching an updated row
misbehaves if the cursor used FOR UPDATE. That's an independent bug that
should be fixed later. Per report from Dharmendra Goyal.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
are not one of the query's defined result relations, but nonetheless have
triggers fired against them while the query is active. This was formerly
impossible but can now occur because of my recent patch to fix the firing
order for RI triggers. Caching a ResultRelInfo avoids duplicating work by
repeatedly opening and closing the same relation, and also allows EXPLAIN
ANALYZE to "see" and report on these extra triggers. Use the same mechanism
to cache open relations when firing deferred triggers at transaction shutdown;
this replaces the former one-element-cache strategy used in that case, and
should improve performance a bit when there are deferred triggers on a number
of relations.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
parent query's EState. Now that there's a single flat rangetable for both
the main plan and subplans, there's no need anymore for a separate EState,
and removing it allows cleaning up some crufty code in nodeSubplan.c and
nodeSubqueryscan.c. Should be a tad faster too, although any difference
will probably be hard to measure. This is the last bit of subsidiary
mop-up work from changing to a flat rangetable.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
involving HashAggregate over SubqueryScan (this is the known case, there
may well be more). The bug is only latent in releases before 8.2 since they
didn't try to access tupletable slots' descriptors during ExecDropTupleTable.
The least bogus fix seems to be to make subqueries share the parent query's
memory context, so that tupdescs they create will have the same lifespan as
those of the parent query. There are comments in the code envisioning going
even further by not having a separate child EState at all, but that will
require rethinking executor access to range tables, which I don't want to
tackle right now. Per bug report from Jean-Pierre Pelletier.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
by name on each and every row processed. Profiling suggests this may
buy a percent or two for simple UPDATE scenarios, which isn't huge,
but when it's so easy to get ...
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
that's shorter-lived than the expression state being evaluated in it really
doesn't work :-( --- we end up with fn_extra caches getting deleted while
still in use. Rather than abandon the notion of caching expression state
across domain_in calls altogether, I chose to make domain_in a bit cozier
with ExprContext. All we really need for evaluating variable-free
expressions is an ExprContext, not an EState, so I invented the notion of a
"standalone" ExprContext. domain_in can prevent resource leakages by doing
a ReScanExprContext on this rather than having to free it entirely; so we
can make the ExprContext have the same lifespan (and particularly the same
per_query memory context) as the expression state structs.
temporary context that can be reset when advancing to the next sublist.
This is faster and more thorough at recovering space than the previous
method; moreover it will do the right thing if something in the sublist
tries to register an expression context callback.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
tuple hash table entries. This addresses the problem previously noted
that use of a 'physical tlist' in the input scan node could bloat the
hash table entries far beyond what the planner expects. It's a better
answer than my previous thought of undoing the physical tlist optimization,
because we can also remove columns that are needed to compute the aggregate
functions but aren't part of the grouping column set.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
relation if it's already been locked by execMain.c as either a result
relation or a FOR UPDATE/SHARE relation. This avoids an extra trip to
the shared lock manager state. Per my suggestion yesterday.
it's worth probing the outer relation for emptiness before building the
hash table. To wit, if we're rescanning a join previously performed,
remember whether we found it nonempty the previous time, and don't bother
with the probe if it was nonempty. This buys back the performance lost
in examples like Mario Weilguni's.
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.