place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
issue in timestamp conversion that we hacked around for so long by
ignoring the seconds field from localtime(). It's simple: you have
to watch out for platform-specific roundoff error when reducing a
possibly-fractional timestamp to integral time_t form. In particular
we should subtract off the already-determined fractional fsec field.
This should be enough to get an exact answer with int64 timestamps;
with float timestamps, throw in a rint() call just to be sure.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
conversion of basic ASCII letters. Remove all uses of strcasecmp and
strncasecmp in favor of new functions pg_strcasecmp and pg_strncasecmp;
remove most but not all direct uses of toupper and tolower in favor of
pg_toupper and pg_tolower. These functions use the same notions of
case folding already developed for identifier case conversion. I left
the straight locale-based folding in place for situations where we are
just manipulating user data and not trying to match it to built-in
strings --- for example, the SQL upper() function is still locale
dependent. Perhaps this will prove not to be what's wanted, but at
the moment we can initdb and pass regression tests in Turkish locale.
"millennium" date part implementation in postgresql, both in the code
and the documentation, so that it conforms to the official definition.
If you do not agree with the official definition, please send your
complaint to "pope@vatican.org". I'm not responsible for them;-)
With the previous version, the centuries and millenniums had a wrong
number and started the wrong year. Moreover century number 0, which does
not exist in reality, lasted 200 years. Also, millennium number 0 lasted
2000 years.
If you want postgresql to have it's own definition of "century" and
"millennium" that does not conform to the one of the society, just give
them another name. I would suggest "pgCENTURY" and "pgMILLENNIUM";-)
IMO, if someone may use the options, it means that postgresql is used for
historical data, so it make sense to have an historical definition. Also,
I just want to divide the year by 100 or 1000, I can do that quite easily.
BACKWARD INCOMPATIBLE CHANGE
Fabien Coelho - coelho@cri.ensmp.fr
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
vs. timestamptz. This allows use of indexes for expressions like
datecol >= date 'today' - interval '1 month'
which were formerly not indexable without casting the righthand side
down from timestamp to date.
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
encountered; per bug report from Christian van der Leeden 8/7/03.
Also, adjust larger/smaller routines (MAX/MIN) to share code with
comparisons for timestamp, interval, timetz.
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
what is capable using integer-datatime timestamps. It does attempt
to exercise the maximum allowable timestamp range.
Also is a small error check when converting a timestamp from external
to internal format that prevents out of range timestamps from being
entered.
Files patched:
Index: src/backend/utils/adt/timestamp.c
Added range check to prevent out of range timestamps
from being used.
Index: src/test/regress/sql/horology.sql
Index: src/test/regress/expected/horology-no-DST-before-1970.out
Index: src/test/regress/expected/horology-solaris-1947.out
Limited range of timestamps being checked to
Jan 1, 4713 BC to Dec 31, 294276
In creating this patch, I have seen some definite problems with integer
timestamps and how they react when used near their limits. For example,
the following statement gives the correct result:
SELECT timestamp without time zone 'Jan 1, 4713 BC'
+ interval '109203489 days' AS "Dec 31, 294276";
However, this statement which is the logical inverse of the above
gives incorrect results:
SELECT timestamp without time zone '12/31/294276'
- timestamp without time zone 'Jan 1, 4713 BC' AS "109203489 Days";
John Cochran
division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
is assumed to be in local time, not GMT. This improves consistency with
other operations, which all assume local timezone when it matters. Per
bug #897.
setting timezone-related variables during transaction start. They were
not used anyway in platforms that HAVE_TM_ZONE or HAVE_INT_TIMEZONE,
which it appears is *all* the platforms we are currently supporting.
For platforms that have neither, we now only support UTC or numeric-
offset-from-UTC timezones.
per gripe from Csaba Nagy. There is still potential for platform-specific
behavior for values that are exactly halfway between integers, but at
least we now get the expected answer for all other cases.
anymore given the mktime() workaround now done in DetermineLocalTimeZone.
This has now been confirmed by Robert Bruccoleri for Irix, and I'm going
to extrapolate to AIX as well.
array header, and to compute sizing and alignment of array elements
the same way normal tuple access operations do --- viz, using the
tupmacs.h macros att_addlength and att_align. This makes the world
safe for arrays of cstrings or intervals, and should make it much
easier to write array-type-polymorphic functions; as examples see
the cleanups of array_out and contrib/array_iterator. By Joe Conway
and Tom Lane.
strings. Should go back in and look at doing this a bit more elegantly
and (hopefully) cheaper. Probably not too bad anyway, but it seems a
shame to scan the strings twice: once for length for this buffer overrun
protection, and once to parse the line.
Remove use of pow() in date/time handling; was already gone from everything
*but* the time data types.
Define macros for handling typmod manipulation for date/time types.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
timestamp/timestamptz combo. Now extract/date_part returns
seconds*1000 or 1000000 + fraction part as the manual stats.
regression test are also fixed.
See the thread in pgsql-hackers:
Subject: Re: [HACKERS] timestamp_part() bug?
Date: Sat, 02 Mar 2002 11:29:53 +0900
Thanks to Bruce for spotting it and Tom Lane for diagnosing it.
Since horology test output is changing anyway, add some date/time input
tests to horology.sql. Some of these should move to the tests for the
individual data types, and we perhaps should add an entire new test
for "timezone" to allow manipulating the current time zone without
risking damage to the results of other tests.
cases which should have worked but did not.
Now supports julian day (J2452271), ISO time labels (T040506) and various
combinations of spaces and run-togethers of dates, times, and time zones.
All regression tests pass, and I have more tests to add after the 7.2
release (don't want to require changes to the ancillary horology result
files until after then).
Tom Lane
Bruce Momjian
PostgreSQL Daemon
Peter Eisentraut
Thomas G. Lockhart
Tatsuo Ishii