> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
portability issues). Caller-visible data structures are now allocated
on MAXALIGN boundaries, allowing safe use of datatypes wider than 'long'.
Rejigger hash_create API so that caller specifies size of key and
total size of entry, not size of key and size of rest of entry.
This simplifies life considerably since each number is just a sizeof(),
and padding issues etc. are taken care of automatically.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
useful as yet, since its primary source of information is (full) VACUUM,
which makes a concerted effort to get rid of free space before telling
the map about it ... next stop is concurrent VACUUM ...
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
whether to do fsync or not, and if so (which should be seldom) just
do the fsync immediately. This way we need not build data structures
in md.c/fd.c for blind writes.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
Now indexes of pg_class and pg_type are unique indexes
and guarantee the uniqueness of correponding attributes.
heap_create() was changed to take another boolean parameter
which allows to postpone the creation of disk file.
The name of rd_nonameunlinked was changed to rd_unlinked.
It is used generally(not only for noname relations) now.
Requires initdb.
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
insight that RelationFlushRelation ought to invoke smgrclose, and that the
way to make that work is to ensure that mdclose doesn't fail if the relation
is already closed (or unlinked, if we are looking at a DROP TABLE). While
I was testing that, I was able to identify several problems that we had
with multiple-segment relations. The system is now able to do initdb and
pass the regression tests with a very small segment size (I had it set to
64Kb per segment for testing). I don't believe that ever worked before.
File descriptor leaks seem to be gone too.
I have partially addressed the concerns we had about mdtruncate(), too.
On a Win32 or NFS filesystem it is not possible to unlink a file that
another backend is holding open, so what md.c now does is to truncate
unwanted files to zero length before trying to unlink them. The other
backends will be forced to close their open files by relation cache
invalidation --- but I think it would take considerable work to make
that happen before vacuum truncates the relation rather than after.
Leaving zero-length files lying around seems a usable compromise.
looks
like someone just didn't add support for multiple segments for
truncation.
The following patch seems to do the right thing, for me at least.
It passed my tests, my data looks right(no data that shouldn't be in
there) and regression is ok.
Ole Gjerde
shared memory space allocation. It's a wonder we have not seen bug
reports traceable to this area ... it's quite clear that the routine
dir_realloc() has never worked correctly, for example.
if MULTIBYTE is not enabled. So be sure to run initdb.
o these patches are made against the latest source tree (after
Bruce's massive patch, I think) BTW, I noticed that after running
regression, the oid field of pg_type seems disappeared.
regression=> select oid from pg_type; ERROR: attribute
'oid' not found
this happens after the constraints test. This occures with/without
my patches. strange...
o pg_database_mb.h, pg_class_mb.h, pg_attribute_mb.h are no longer
used, and shoud be removed.
o GetDatabaseInfo() in utils/misc/database.c removed (actually in
#ifdef 0). seems nobody uses.
t-ishii@sra.co.jp
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
After applying the following patch there remain two
probable buffer overruns detected by Electric Fence during
the regression test.
I'll try find out what causes the remain two ones.
This patch also corrects a typo in smgr.c.
manager to not try to split files in 2 gig chunks. It will just
try to get another block.
If applied, everything is just as before. But if LET_OS_MANAGE_FILESIZE
is defined, the chaining disappears and the file just keeps on
going, and going, and going, til the OS barfs.
Darren King
==========================================
What follows is a set of diffs that cleans up the usage of BLCKSZ.
As a side effect, the person compiling the code can change the
value of BLCKSZ _at_their_own_risk_. By that, I mean that I've
tried it here at 4096 and 16384 with no ill-effects. A value
of 4096 _shouldn't_ affect much as far as the kernel/file system
goes, but making it bigger than 8192 can have severe consequences
if you don't know what you're doing. 16394 worked for me, _BUT_
when I went to 32768 and did an initdb, the SCSI driver broke and
the partition that I was running under went to hell in a hand
basket. Had to reboot and do a good bit of fsck'ing to fix things up.
The patch can be safely applied though. Just leave BLCKSZ = 8192
and everything is as before. It basically only cleans up all of the
references to BLCKSZ in the code.
If this patch is applied, a comment in the config.h file though above
the BLCKSZ define with warning about monkeying around with it would
be a good idea.
Darren darrenk@insightdist.com
(Also cleans up some of the #includes in files referencing BLCKSZ.)
==========================================
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
mdunlink() and mdclose() (too !!!) now free MdfdVec for relation
and add it to free list, so it may be re-used for another relation
later.
2. Fix VFD-manager memory leak (found by Massimo ... and me):
mdunlink() has to call FileUnlink() to free allocation for fileName
and add the Vfd slot to the free list.
fd = FileNameOpenFile(path, O_RDWR|O_CREAT|O_EXCL, 0600);
/*
* If the file already exists and is empty, we pretend that the
* create succeeded. During bootstrap processing, we skip that check,
* because pg_time, pg_variable, and pg_log get created before their
* .bki file entries are processed.
*
> * As the result of this pretence it was possible to have in
> * pg_class > 1 records with the same relname. Actually, it
> * should be fixed in upper levels, too, but... - vadim 05/06/97
> */
- src/backend/tcop/*
- cosmetic changes to OPENLINK patches
- src/backend/storage/*
- more changes, mostly cosmetic
- src/backend/ports/*
- merge in patches for aix and i386_solaris