This to allow verifying the MSVC build file generation without having
to have Windows.
To do this, we avoid Windows-specific Perl modules and don't run the
"cl" compiler or "nmake". The resulting build files won't actually be
completely correct, but it's useful enough.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d73b2c7b-f081-8357-8422-7564d55f1aac%402ndquadrant.com
These compiler features are required by C99, so remove the configure
probes for them.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm; it's been required by POSIX since SUSv2. So remove the
configure probe and tests of HAVE_WCHAR_H.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and c.h's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
stdint.h belongs to the compiler (as opposed to inttypes.h), so by
requiring a C99 compiler we can also require stdint.h
unconditionally. Remove configure checks and other workarounds for
it.
This also removes a few steps in the required portability adjustments
to the imported time zone code, which can be applied on the next
import.
When using GCC on a platform that is otherwise pre-C99, this will now
require at least GCC 4.5, which is the first release that supplied a
standard-conforming stdint.h if the native platform didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/5d398bbb-262a-5fed-d839-d0e5cff3c0d7%402ndquadrant.com
The previous system had configure put the value into the makefiles and
then have the makefiles pass them to the build of pg_config. That was
put in place when pg_config was a shell script. We can simplify that
by having configure put the value into pg_config.h directly. This
also makes the standard build system match how the MSVC build system
already does it.
Discussion: https://www.postgresql.org/message-id/flat/6e457870-cef5-5f1d-b57c-fc89cfb8a788%402ndquadrant.com
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
As of commit 50fc694e4, the plperl tests don't want preinstalled
plperl languages; they now install those themselves. I'd removed the
--load-extension options from the GNUmakefile, but missed teaching
the MSVC build script about that.
Per buildfarm.
src/include/common/unicode_combining_table.h is currently not meant to
be included standalone. Things could be refactored to allow it, but
that would be beyond the present purpose. So adding an exclusion here
seems best.
Discussion: https://www.postgresql.org/message-id/10754.1579535012@sss.pgh.pa.us
I had supposed that all versions of Readline that have filename
quoting hooks also have the rl_completion_suppress_quote variable.
But it seems OpenBSD managed to find a version someplace that does
not, so we'll have to expend a separate configure probe for that.
(Light testing suggests that this version also lacks the bugs that
make it necessary to frob that variable. Hooray!)
Per buildfarm.
The Readline library contains a fair amount of knowledge about how to
tab-complete filenames, but it turns out that that doesn't work too well
unless we follow its expectation that we use its filename quoting hooks
to quote and de-quote filenames. We were trying to do such quote handling
within complete_from_files(), and that's still what we have to do if we're
using libedit, which lacks those hooks. But for Readline, it works a lot
better if we tell Readline that single-quote is a quoting character and
then provide hooks that know the details of the quoting rules for SQL
and psql meta-commands.
Hence, resurrect the quoting hook functions that existed in the original
version of tab-complete.c (and were disabled by commit f6689a328 because
they "didn't work so well yet"), and whack on them until they do seem to
work well.
Notably, this fixes bug #16059 from Steven Winfield, who pointed out
that the previous coding would strip quote marks from filenames in SQL
COPY commands, even though they're syntactically necessary there.
Now, we not only don't do that, but we'll add a quote mark when you
tab-complete, even if you didn't type one.
Getting this to work across a range of libedit versions (and, to a
lesser extent, libreadline versions) was depressingly difficult.
It will be interesting to see whether the new regression test cases
pass everywhere in the buildfarm.
Some future patch might try to handle quoted SQL identifiers with
similar explicit quoting/dequoting logic, but that's for another day.
Patch by me, reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/16059-8836946734c02b84@postgresql.org
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
This data was only in separate files because it was the most convenient
way to handle it with a shell script. Now that we use a general-purpose
programming language, it's easy to assemble the data into the same format
as the rest of the catalogs and output it into postgres.bki. This allows
removal of some special-purpose code from initdb.c.
Discussion: https://www.postgresql.org/message-id/CACPNZCtVFtjHre6hg9dput0qRPp39pzuyA2A6BT8wdgrRy%2BQdA%40mail.gmail.com
Author: John Naylor
Two routines have been added in OpenSSL 1.1.0 to set the protocol bounds
allowed within a given SSL context:
- SSL_CTX_set_min_proto_version
- SSL_CTX_set_max_proto_version
As Postgres supports OpenSSL down to 1.0.1 (as of HEAD), equivalent
replacements exist in the tree, which are only available for the
backend. A follow-up patch is planned to add control of the SSL
protocol bounds for libpq, so move those routines to src/common/ so as
libpq can use them.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Formerly, various frontend directories symlinked these two sources
and then built them locally. That's an ancient, ugly hack, and
we now have a much better way: put them into libpgcommon.
So do that. (The immediate motivation for this is the prospect
of having to introduce still more symlinking if we don't.)
This commit moves these two files absolutely verbatim, for ease of
reviewing the git history. There's some follow-on work to be done
that will modify them a bit.
Robert Haas, Tom Lane
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
For historical reasons, libpq used a separate libpq.rc file for the
Windows builds while all other components use a common file
win32ver.rc. With a bit of tweaking, the libpq build can also use the
win32ver.rc file. This removes a bit of duplicative code.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/ad505e61-a923-e114-9f38-9867d161073f@2ndquadrant.com
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Change the exception syntax used in the tests to use the more current
except Exception as ex:
rather than the old
except Exception, ex:
Since support for Python <2.6 has been removed, all supported versions
now support the new style, and we can save one step in the Python 3
compatibility conversion.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/98b69261-298c-13d2-f34d-836fd9c29b21%402ndquadrant.com
Most of the MSVC Perl code uses forward slashes for file paths. Make
the few places that use backslashes the same. This also helps running
that code on non-Windows.
Previously, the Windows MSVC build generated pg_config.h from a
hard-coded pg_config.h.win32 with some ad hoc postprocessing. The
pg_config.h.win32 file required manual maintenance and was as a result
frequently out of date.
Instead, have the MSVC build scripts emulate what configure and
config.status do: collect a list of defines and then create
pg_config.h from pg_config.h.in by changing the appropriate lines.
The previous setup was made to support old Windows build systems that
didn't have any text processing capabilities, but the current system
has Perl, so it's not a problem. pg_config.h.win32 is removed.
In order to try to keep the Windows side of things more up to date in
the future, we now also require that all symbols found in
pg_config.h.in are defined in the MSVC build system. So if there is a
change in configure that results in a new symbol, an update in
Solution.pm will be required.
The other headers managed by AC_CONFIG_HEADERS in configure, namely
src/include/pg_config_ext.h and
src/interfaces/ecpg/include/ecpg_config.h, get the same treatment, so
this removes even more ad hoc code in the MSVC build scripts.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/1441b834-f434-e0bf-46ed-9c4d5c29c2d4%402ndquadrant.com
Tuple conversion support in tupconvert.c is able to convert rowtypes
between two relations, inner and outer, which are logically equivalent
but have a different ordering or even dropped columns (used mainly for
inheritance tree and partitions). This makes use of attribute mappings,
which are simple arrays made of AttrNumber elements with a length
matching the number of attributes of the outer relation. The length of
the attribute mapping has been treated as completely independent of the
mapping itself until now, making it easy to pass down an incorrect
mapping length.
This commit refactors the code related to attribute mappings and moves
it into an independent facility called attmap.c, extracted from
tupconvert.c. This merges the attribute mapping with its length,
avoiding to try to guess what is the length of a mapping to use as this
is computed once, when the map is built.
This will avoid mistakes like what has been fixed in dc816e58, which has
used an incorrect mapping length by matching it with the number of
attributes of an inner relation (a child partition) instead of an outer
relation (a partitioned table).
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
Clean up some comments (some generated by old versions of autoconf)
and some random ordering differences, so it's easier to diff this
against the default pg_config.h or pg_config.h.in. Remove LOCALEDIR
handling from pg_config.h.win32 altogether because it's already in
pg_config_paths.h.
Originally, this code was duplicated in src/bin/psql/ and
src/bin/scripts/, but it can be useful for other frontend applications,
like pgbench. This refactoring offers the possibility to setup a custom
callback which would get called in the signal handler for SIGINT or when
the interruption console events happen on Windows.
Author: Fabien Coelho, with contributions from Michael Paquier
Reviewed-by: Álvaro Herrera, Ibrar Ahmed
Discussion: https://postgr.es/m/alpine.DEB.2.21.1910311939430.27369@lancre
This build option was once useful to maintain compatibility with
version-0 functions, but those are no longer supported, so this option
is no longer useful for end users. We keep the option available to
developers in pg_config_manual.h so that it is easy to test the
pass-by-reference code paths without having to fire up a 32-bit
machine.
Discussion: https://www.postgresql.org/message-id/flat/f3e1e576-2749-bbd7-2d57-3f9dcf75255a@2ndquadrant.com
This reworks the reloption parsing and build of a couple of index AMs by
creating new structures for each index AM's options. This split was
already done for BRIN, GIN and GiST (which actually has a fillfactor
parameter), but not for hash, B-tree and SPGiST which relied on
StdRdOptions due to an overlap with the default option set.
This saves a couple of bytes for rd_options in each relcache entry with
indexes making use of relation options, and brings more consistency
between all index AMs. While on it, add a couple of AssertMacro() calls
to make sure that utility macros to grab values of reloptions are used
with the expected index AM.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier, Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/4127670.gFlpRb6XCm@x200m
This completes the task begun in commit 1408d5d86, to synchronize
ECPG's exported definitions with the definition of bool used by
c.h (and, therefore, the one actually in use in the ECPG library).
On practically all modern platforms, ecpglib.h will now just
include <stdbool.h>, which should surprise nobody anymore.
That removes a header-inclusion-order hazard for ECPG clients,
who previously might get build failures or unexpected behavior
depending on whether they'd included <stdbool.h> themselves,
and if so, whether before or after ecpglib.h.
On platforms where sizeof(_Bool) is not 1 (only old PPC-based
Mac systems, as far as I know), things are still messy, as
inclusion of <stdbool.h> could still break ECPG client code.
There doesn't seem to be any clean fix for that, and given the
probably-negligible population of users who would care anymore,
it's not clear we should go far out of our way to cope with it.
This change at least fixes some header-inclusion-order hazards
for our own code, since c.h and ecpglib.h previously disagreed
on whether bool should be char or unsigned char.
To implement this with minimal invasion of ECPG client namespace,
move the choice of whether to rely on <stdbool.h> into configure,
and have it export a configuration symbol PG_USE_STDBOOL.
ecpglib.h no longer exports definitions for TRUE and FALSE,
only their lowercase brethren. We could undo that if we get
push-back about it.
Ideally we'd back-patch this as far as v11, which is where c.h
started to rely on <stdbool.h>. But the odds of creating problems
for formerly-working ECPG client code seem about as large as the
odds of fixing any non-working cases, so we'll just do this in HEAD.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
There's plenty places in frontend code that could benefit from a
string buffer implementation. Some because it yields simpler and
faster code, and some others because of the desire to share code
between backend and frontend.
While there is a string buffer implementation available to frontend
code, libpq's PQExpBuffer, it is clunkier than stringinfo, it
introduces a libpq dependency, doesn't allow for sharing between
frontend and backend code, and has a higher API/ABI stability
requirement due to being exposed via libpq.
Therefore it seems best to just making StringInfo being usable by
frontend code. There's not much to do for that, except for rewriting
two subsequent elog/ereport calls into others types of error
reporting, and deciding on a maximum string length.
For the maximum string size I decided to privately define MaxAllocSize
to the same value as used in the backend. It seems likely that we'll
want to reconsider this for both backend and frontend code in the not
too far away future.
For now I've left stringinfo.h in lib/, rather than common/, to reduce
the likelihood of unnecessary breakage. We could alternatively decide
to provide a redirecting stringinfo.h in lib/, or just not provide
compatibility.
Author: Andres Freund
Reviewed-By: Kyotaro Horiguchi, Daniel Gustafsson
Discussion: https://postgr.es/m/20190920051857.2fhnvhvx4qdddviz@alap3.anarazel.de
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
As of d9dd406fe2, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
First, make sure that the .exe name is quoted when trying to get the
version number. Also, don't quote the lib name for using in the project
files if it's already been quoted. This second change applies to all
libraries, not just OpenSSL.
This has clearly been broken forever, so backpatch to all live branches.
This includes more tests dedicated to relation options, bringing the
coverage of this code close to 100%, and the module can be used for
other purposes, like a base template for an index AM implementation.
Author: Nikolay Sharplov, Michael Paquier
Reviewed-by: Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/17071942.m9zZutALE6@x200m
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
Tom Lane
Peter Eisentraut
Thomas Munro
Robert Haas
Amit Kapila
Heikki Linnakangas
Michael Paquier
Bruce Momjian
Alvaro Herrera
Andres Freund
Noah Misch
Andrew Dunstan
Alexander Korotkov