After autovacuum collects the relations to vacuum or analyze, it rechecks
whether each relation still needs to be vacuumed or analyzed before actually
doing that. Previously this recheck could be a significant overhead
especially when there were a very large number of relations. This was
because each recheck forced the statistics to be refreshed, and the refresh
of the statistics for a very large number of relations could cause heavy
overhead. There was the report that this issue caused autovacuum workers
to have gotten “stuck” in a tight loop of table_recheck_autovac() that
rechecks whether a relation needs to be vacuumed or analyzed.
This commit speeds up the recheck by making autovacuum worker reuse
the previously-read statistics for the recheck if possible. Then if that
"stale" statistics says that a relation still needs to be vacuumed or analyzed,
autovacuum refreshes the statistics and does the recheck again.
The benchmark shows that the more relations exist and autovacuum workers
are running concurrently, the more this change reduces the autovacuum
execution time. For example, when there are 20,000 tables and 10 autovacuum
workers are running, the benchmark showed that the change improved
the performance of autovacuum more than three times. On the other hand,
even when there are only 1000 tables and only a single autovacuum worker
is running, the benchmark didn't show any big performance regression by
the change.
Firstly POC patch was proposed by Jim Nasby. As the result of discussion,
we used Tatsuhito Kasahara's version of the patch using the approach
suggested by Tom Lane.
Reported-by: Jim Nasby
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/3FC6C2F2-8A47-44C0-B997-28830B5716D0@amazon.com
clang only uses the 'i1' type for scalar booleans, not for pointers to
booleans (as the pointer might be pointing into a larger memory
allocation). Therefore a pointer-to-bool needs to the "storage" boolean.
There's no known case of wrong code generation due to this, but it seems quite
possible that it could cause problems (see e.g. 72559438f9).
Author: Andres Freund
Discussion: https://postgr.es/m/20201207212142.wz5tnbk2jsaqzogb@alap3.anarazel.de
Backpatch: 11-, where jit support was added
pg_database.datfrozenxid gets updated using an in-place update at the
end of vacuum or autovacuum. Since 96cdeae, as pg_database has a toast
relation, it is possible for a pg_database tuple to have toast values
if there is a large set of ACLs in place. In such a case, the in-place
update would fail because of the flattening of the toast values done for
the catcache entry fetched. Instead of using a copy from the catcache,
this changes the logic to fetch the copy of the tuple by directly
scanning pg_database.
Per the lack of complaints on the matter, no backpatch is done. Note
that before 96cdeae, attempting to insert such a tuple to pg_database
would cause a "row is too big" error, so the end-of-vacuum problem was
not reachable.
Author: Ashwin Agrawal, Junfeng Yang
Discussion: https://postgr.es/m/DM5PR0501MB38800D9E4605BCA72DD35557CCE10@DM5PR0501MB3880.namprd05.prod.outlook.com
Exercise some error cases that were never reached in the existing
regression tests. This is partly for code-coverage reasons, and
partly to memorialize the current behavior in advance of planned
changes for generic subscripting.
Also, I noticed that type_sanity's check to verify that all standard
types have array types was never extended when we added arrays for
all system catalog rowtypes (f7f70d5e2), nor when we added arrays
over domain types (c12d570fa). So do that. Also, since the query's
expected output isn't empty, it seems like a good idea to add an
ORDER BY to make sure the result stays stable.
pg_rewind looks at the control file to check what timeline a server is on.
But promotion doesn't immediately write a checkpoint, it merely writes
an end-of-recovery WAL record. If pg_rewind runs immediately after
promotion, before the checkpoint has completed, it will think think that
the server is still on the earlier timeline. We ran into this issue a long
time ago already, see commit 484a848a73.
It's a bit bogus that pg_rewind doesn't determine the timeline correctly
until the end-of-recovery checkpoint has completed. We probably should
fix that. But for now work around it by waiting for the checkpoint
to complete before running pg_rewind, like we did in commit 484a848a73.
In the passing, tidy up the new test a little bit. Rerder the INSERTs so
that the comments make more sense, remove a spurious CHECKPOINT call after
pg_rewind has already run, and add --debug option, so that if this fails
again, we'll have more data.
Per buildfarm failure at https://buildfarm.postgresql.org/cgi-bin/show_stage_log.pl?nm=rorqual&dt=2020-12-06%2018%3A32%3A19&stg=pg_rewind-check.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/1713707e-e318-761c-d287-5b6a4aa807e8@iki.fi
Along the same lines as ed2c7f65b and daa9fe8a5, reduce code duplication
by having just one copy of the parts of the query that are the same
across all server versions; and make the conditionals control the
smallest possible amount of code. This is in preparation for adding
another dumpable field to pg_type.
An error code path newly-introduced by 87ae969 forgot to close a file
descriptor when verifying a file's checksum.
Per report from Coverity, via Tom Lane.
Commit 4be058fe9 forgot that the append_rel_list would already be
populated at the time we remove useless result RTEs, and it might contain
PlaceHolderVars that need to be adjusted like the ones in the main parse
tree. This could lead to "no relation entry for relid N" failures later
on, when the planner tries to do something with an unadjusted PHV.
Per report from Tom Ellis. Back-patch to v12 where the bug came in.
Discussion: https://postgr.es/m/20201205173056.GF30712@cloudinit-builder
Buildfarm has been failing sporadically on the new test. I was able to
reproduce this by adding a random 0-10 s delay in the walreceiver, just
before it connects to the primary. There's a race condition where node_3
is promoted before it has fully caught up with node_1, leading to diverged
timelines. When node_1 is later reconfigured as standby following node_3,
it fails to catch up:
LOG: primary server contains no more WAL on requested timeline 1
LOG: new timeline 2 forked off current database system timeline 1 before current recovery point 0/30000A0
That's the situation where you'd need to use pg_rewind, but in this case
it happens already when we are just setting up the actual pg_rewind
scenario we want to test, so change the test so that it waits until
node_3 is connected and fully caught up before promoting it, so that you
get a clean, controlled failover.
Also rewrite some of the comments, for clarity. The existing comments
detailed what each step in the test did, but didn't give a good overview
of the situation the steps were trying to create.
For reasons I don't understand, the test setup had to be written slightly
differently in 9.6 and 9.5 than in later versions. The 9.5/9.6 version
needed node 1 to be reinitialized from backup, whereas in later versions
it could be shut down and reconfigured to be a standby. But even 9.5 should
support "clean switchover", where primary makes sure that pending WAL is
replicated to standby on shutdown. It would be nice to figure out what's
going on there, but that's independent of pg_rewind and the scenario that
this test tests.
Discussion: https://www.postgresql.org/message-id/b0a3b95b-82d2-6089-6892-40570f8c5e60%40iki.fi
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
We start recording changes in ReorderBufferTXN even before we reach
SNAPBUILD_CONSISTENT state so that if the commit is encountered after
reaching that we should be able to send the changes of the entire transaction.
Now, while recording changes if the reorder buffer memory has exceeded
logical_decoding_work_mem then we can start streaming if it is allowed and
we haven't yet streamed that data. However, we must not allow streaming to
start unless the snapshot has reached SNAPBUILD_CONSISTENT state.
In passing, improve the comments atop ReorderBufferResetTXN to mention the
case when we need to continue streaming after getting an error.
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1KoOH0byboyYY40NBcC7Fe812trwTa+WY3jQF7WQWZbQg@mail.gmail.com
87ae969 has created two new files called cryptohash{_openssl}.c in
src/common/, whose names overlap with the existing backend file called
cryptohashes.c dedicated to the SQL wrappers for SHA2 and MD5. This
file is renamed to cryptohashfuncs.c to be more consistent with the
surroundings and reduce the confusion with the new cryptohash interface
of src/common/.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/X8hHhaQgbMbW+aGU@paquier.xyz
The use of low-level hash routines is not recommended by upstream
OpenSSL since 2000, and pgcrypto already switched to EVP as of 5ff4a67.
This takes advantage of the refactoring done in 87ae969 that has
introduced the allocation and free routines for cryptographic hashes.
Since 1.1.0, OpenSSL does not publish the contents of the cryptohash
contexts, forcing any consumers to rely on OpenSSL for all allocations.
Hence, the resource owner callback mechanism gains a new set of routines
to track and free cryptohash contexts when using OpenSSL, preventing any
risks of leaks in the backend. Nothing is needed in the frontend thanks
to the refactoring of 87ae969, and the resowner knowledge is isolated
into cryptohash_openssl.c.
Note that this also fixes a failure with SCRAM authentication when using
FIPS in OpenSSL, but as there have been few complaints about this
problem and as this causes an ABI breakage, no backpatch is done.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Heikki Linnakangas
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Discussion: https://postgr.es/m/20180911030250.GA27115@paquier.xyz
If the target is a standby server, its WAL doesn't end at the last
checkpoint record, but at minRecoveryPoint. We must scan all the
WAL from the last common checkpoint all the way up to minRecoveryPoint
for modified pages, and also consider that portion when determining
whether the server needs rewinding.
Backpatch to all supported versions.
Author: Ian Barwick and me
Discussion: https://www.postgresql.org/message-id/CABvVfJU-LDWvoz4-Yow3Ay5LZYTuPD7eSjjE4kGyNZpXC6FrVQ%40mail.gmail.com
Formerly we only applied extended statistics to an OR clause as part
of the clauselist_selectivity() code path for an OR clause appearing
in an implicitly-ANDed list of clauses. This meant that it could only
use extended statistics if all sub-clauses of the OR clause were
covered by a single extended statistics object.
Instead, teach clause_selectivity() how to apply extended statistics
to an OR clause by handling its ORed list of sub-clauses in a similar
manner to an implicitly-ANDed list of sub-clauses, but with different
combination rules. This allows one or more extended statistics objects
to be used to estimate all or part of the list of sub-clauses. Any
remaining sub-clauses are then treated as if they are independent.
Additionally, to avoid double-application of extended statistics, this
introduces "extended" versions of clause_selectivity() and
clauselist_selectivity(), which include an option to ignore extended
statistics. This replaces the old clauselist_selectivity_simple()
function which failed to completely ignore extended statistics when
called from the extended statistics code.
A known limitation of the current infrastructure is that an AND clause
under an OR clause is not treated as compatible with extended
statistics (because we don't build RestrictInfos for such sub-AND
clauses). Thus, for example, "(a=1 AND b=1) OR (a=2 AND b=2)" will
currently be treated as two independent AND clauses (each of which may
be estimated using extended statistics), but extended statistics will
not currently be used to account for any possible overlap between
those clauses. Improving that is left as a task for the future.
Original patch by Tomas Vondra, with additional improvements by me.
Discussion: https://postgr.es/m/20200113230008.g67iyk4cs3xbnjju@development
This changes CLUSTER and REINDEX so as a parenthesized grammar becomes
possible for options, while unifying the grammar parsing rules for
option lists with the existing ones.
This is a follow-up of the work done in 873ea9e for VACUUM, ANALYZE and
EXPLAIN. This benefits REINDEX for a potential backend-side filtering
for collatable-sensitive indexes and TABLESPACE, while CLUSTER would
benefit from the latter.
Author: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
GSS information (if used) such as if the connection was authorized using
GSS or if it was encrypted using GSS, and perhaps most importantly, what
the GSS principal used for the authentication was, is extremely useful
but wasn't being included in the connection authorized log message.
Therefore, add to the connection authorized log message that
information, in a similar manner to how we log SSL information when SSL
is used for a connection.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy
Discussion: https://www.postgresql.org/message-id/CALDaNm2N1385_Ltoo%3DS7VGT-ESu_bRQa-sC1wg6ikrM2L2Z49w%40mail.gmail.com
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
This commit changes restore_command from PGC_POSTMASTER to PGC_SIGHUP.
As the side effect of this commit, restore_command can be reset to
empty during archive recovery. In this setting, archive recovery
tries to replay only WAL files available in pg_wal directory. This is
the same behavior as when the command that always fails is specified
in restore_command.
Note that restore_command still must be specified (not empty) when
starting archive recovery, even after applying this commit. This is
necessary as the safeguard to prevent users from forgetting to
specify restore_command and starting archive recovery.
Thanks to Peter Eisentraut, Michael Paquier, Andres Freund,
Robert Haas and Anastasia Lubennikova for discussion.
Author: Sergei Kornilov
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/2317771549527294@sas2-985f744271ca.qloud-c.yandex.net
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
As it stood, expandTableLikeClause() re-did the same relation_openrv
call that transformTableLikeClause() had done. However there are
scenarios where this would not find the same table as expected.
We hold lock on the LIKE source table, so it can't be renamed or
dropped, but another table could appear before it in the search path.
This explains the odd behavior reported in bug #16758 when cloning a
table as a temp table of the same name. This case worked as expected
before commit 502898192 introduced the need to open the source table
twice, so we should fix it.
To make really sure we get the same table, let's re-open it by OID not
name. That requires adding an OID field to struct TableLikeClause,
which is a little nervous-making from an ABI standpoint, but as long
as it's at the end I don't think there's any serious risk.
Per bug #16758 from Marc Boeren. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16758-840e84a6cfab276d@postgresql.org
When committing a transaction that dropped a relation, we previously
truncated only the first segment file to free up disk space (the one
that won't be unlinked until the next checkpoint).
Truncate higher numbered segments too, even though we unlink them on
commit. This frees the disk space immediately, even if other backends
have open file descriptors and might take a long time to get around to
handling shared invalidation events and closing them. Also extend the
same behavior to the first segment, in recovery.
Back-patch to all supported releases.
Bug: #16663
Reported-by: Denis Patron <denis.patron@previnet.it>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Reviewed-by: Neil Chen <carpenter.nail.cz@gmail.com>
Reviewed-by: David Zhang <david.zhang@highgo.ca>
Discussion: https://postgr.es/m/16663-fe97ccf9932fc800%40postgresql.org
For debugging purposes, Path nodes are supposed to have outfuncs
support, but this was overlooked in the original incremental sort patch.
While at it, clean up a couple other minor oversights, as well as
bizarre choice of return type for create_incremental_sort_path().
(All the existing callers just cast it to "Path *" immediately, so
they don't care, but some future caller might care.)
outfuncs.c fix by Zhijie Hou, the rest by me
Discussion: https://postgr.es/m/324c4d81d8134117972a5b1f6cdf9560@G08CNEXMBPEKD05.g08.fujitsu.local
This can't work if there's no postmaster, and indeed the code got an
assertion failure trying. There should be a check on IsUnderPostmaster
gating the use of parallelism, as the planner has for ordinary
parallel queries.
Commit 40d964ec9 got this right, so follow its model of checking
IsUnderPostmaster at the same place where we check for
max_parallel_maintenance_workers == 0. In general, new code
implementing parallel utility operations should do the same.
Report and patch by Yulin Pei, cosmetically adjusted by me.
Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/HK0PR01MB22747D839F77142D7E76A45DF4F50@HK0PR01MB2274.apcprd01.prod.exchangelabs.com
If a PlaceHolderVar is to be evaluated at a join relation, but
its value is only needed there and not at higher levels, we neglected
to update the joinrel's direct_lateral_relids to include the PHV's
source rel. This causes problems because join_is_legal() then won't
allow joining the joinrel to the PHV's source rel at all, leading
to "failed to build any N-way joins" planner failures.
Per report from Andreas Seltenreich. Back-patch to 9.5
where the problem originated.
Discussion: https://postgr.es/m/87blfgqa4t.fsf@aurora.ydns.eu
Those three commands have been using the same grammar rules to handle a
a list of parenthesized options. This refactors the code so as they use
the same parsing rules, shaving some code. A future commit will make
use of those option parsing rules for more utility commands, like
REINDEX and CLUSTER.
Author: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
Previously the shutdown of a background worker that uses die() as
SIGTERM signal handler produced the log message "terminating
connection due to administrator command". This log message was
confusing because a background worker is not a connection.
This commit improves that log message to "terminating background
worker XXX due to administrator command" (XXX is replaced with
the name of the background worker). This is the same log message
as another SIGTERM signal handler bgworker_die() for a background
worker reports.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/3f292fbb-f155-9a01-7cb2-7ccc9007ab3f@oss.nttdata.com
Through my misreading of what the existing code actually did,
commits 85c54287a et al. broke psql's behavior for the case where
"\c connstring" provides a password in the connstring. We should
use that password in such a case, but as of 85c54287a we ignored it
(and instead, prompted for a password).
Commit 94929f1cf fixed that in HEAD, but since I thought it was
cleaning up a longstanding misbehavior and not one I'd just created,
I didn't back-patch it.
Hence, back-patch the portions of 94929f1cf having to do with
password management. In addition to fixing the introduced bug,
this means that "\c -reuse-previous=on connstring" will allow
re-use of an existing connection's password if the connstring
doesn't change user/host/port. That didn't happen before, but
it seems like a bug fix, and anyway I'm loath to have significant
differences in this code across versions.
Also fix an error with the same root cause about whether or not to
override a connstring's setting of client_encoding. As of 85c54287a
we always did so; restore the previous behavior of overriding only
when stdin/stdout are a terminal and there's no environment setting
of PGCLIENTENCODING. (I find that definition a bit surprising, but
right now doesn't seem like the time to revisit it.)
Per bug #16746 from Krzysztof Gradek. As with the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16746-44b30e2edf4335d4@postgresql.org
Buildfarm member topminnow failed when the test script attempted this
before the syslogger would have created the file. Back-patch to v12,
which introduced the test.
Commit 566372b3d fixed some race conditions involving concurrent
SimpleLruTruncate calls, but it introduced new ones in async.c.
A newly-listening backend could attempt to read Notify SLRU pages that
were in process of being truncated, possibly causing an error. Also,
the QUEUE_TAIL pointer could become set to a value that's not equal to
the queue position of any backend. While that's fairly harmless in
v13 and up (thanks to commit 51004c717), in older branches it resulted
in near-permanent disabling of the queue truncation logic, so that
continued use of NOTIFY led to queue-fill warnings and eventual
inability to send any more notifies. (A server restart is enough to
make that go away, but it's still pretty unpleasant.)
The core of the problem is confusion about whether QUEUE_TAIL
represents the "logical" tail of the queue (i.e., the oldest
still-interesting data) or the "physical" tail (the oldest data we've
not yet truncated away). To fix, split that into two variables.
QUEUE_TAIL regains its definition as the logical tail, and we
introduce a new variable to track the oldest un-truncated page.
Per report from Mikael Gustavsson. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/1b8561412e8a4f038d7a491c8b922788@smhi.se
Previously pg_stat_progress_cluster view reported the current block
number in heap scan as the number of heap blocks scanned (i.e.,
heap_blks_scanned). This reported number could be incorrect when
synchronize_seqscans is enabled, because it allowed the heap scan to
start at block in middle. This could result in wraparounds in the
heap_blks_scanned column when the heap scan wrapped around.
This commit fixes the bug by calculating the number of blocks from
the block that the heap scan starts at to the current block in scan,
and reporting that number in the heap_blks_scanned column.
Also, in pg_stat_progress_cluster view, previously heap_blks_scanned
could not reach heap_blks_total at the end of heap scan phase
if the last pages scanned were empty. This commit fixes the bug by
manually updating heap_blks_scanned to the same value as
heap_blks_total when the heap scan phase finishes.
Back-patch to v12 where pg_stat_progress_cluster view was introduced.
Reported-by: Matthias van de Meent
Author: Matthias van de Meent
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAEze2WjCBWSGkVfYag001Rc4+-nNLDpWM7QbyD6yPvuhKs-gYQ@mail.gmail.com
Previously test_shm_mq worker used the stripped-down version of die()
as the SIGTERM signal handler. This commit makes it use die(), instead,
to simplify the code.
In terms of the code, the difference between die() and the stripped-down
version previously used is whether the signal handler directly may call
ProcessInterrupts() or not. But this difference doesn't exist in
a background worker because, in bgworker, DoingCommandRead flag will
never be true and die() will never call ProcessInterrupts() directly.
Therefore test_shm_mq worker can safely use die(), like other bgworker
proceses (e.g., logical replication apply launcher or autoprewarm worker)
currently do.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
Previously worker_spi used its custom signal handlers for SIGHUP and
SIGTERM. This commit makes worker_spi use the standard signal handlers,
to simplify the code.
Note that die() is used as the standard SIGTERM signal handler in
worker_spi instead of SignalHandlerForShutdownRequest() or bgworker_die().
Previously the exit handling was only able to exit from within the main loop,
and not from within the backend code it calls. This is why die() needs to
be used here, so worker_spi can respond to SIGTERM signal while it's
executing a query.
Maybe we can say that it's a bug that worker_spi could not respond to
SIGTERM during query execution. But since worker_spi is a just example
of the background worker code, we don't do the back-patch.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXDEZhAFOTDcqO9cFSRvrFLyYOnPKrcA1UG4uZn9hUAVg@mail.gmail.com
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
Tablesync worker runs under a single transaction but in streaming mode, we
were committing the transaction on stream_stop, stream_abort, and
stream_commit. We need to avoid committing the transaction in a streaming
mode in tablesync worker.
In passing move the call to process_syncing_tables in
apply_handle_stream_commit after clean up of stream files. This will
allow clean up of files to happen before the exit of tablesync worker
which would otherwise be handled by one of the proc exit routines.
Author: Dilip Kumar
Reviewed-by: Amit Kapila and Peter Smith
Tested-by: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pt4PyKQCwqzQ=EFF=bpKKJD7XKt_S23F6L20ayQNxg77A@mail.gmail.com
Reverts 27838981be (some comments are kept). Per discussion, it does
not seem safe to relax the lock level used for this; in order for it to
be safe, there would have to be memory barriers between the point we set
the flag and the point we set the trasaction Xid, which perhaps would
not be so bad; but there would also have to be barriers at the readers'
side, which from a performance perspective might be bad.
Now maybe this analysis is wrong and it *is* safe for some reason, but
proof of that is not trivial.
Discussion: https://postgr.es/m/20201118190928.vnztes7c2sldu43a@alap3.anarazel.de
If more distinct statements than pg_stat_statements.max are observed,
pg_stat_statements entries about the least-executed statements are
deallocated. This commit enables us to track the total number of times
those entries were deallocated. That number can be viewed in the
pg_stat_statements_info view that this commit adds. It's useful when
tuning pg_stat_statements.max parameter. If it's high, i.e., the entries
are deallocated very frequently, which might cause the performance
regression and we can increase pg_stat_statements.max to avoid those
frequent deallocations.
The pg_stat_statements_info view is intended to display the statistics
of pg_stat_statements module itself. Currently it has only one column
"dealloc" indicating the number of times entries were deallocated.
But an upcoming patch will add other columns (for example, the time
at which pg_stat_statements statistics were last reset) into the view.
Author: Katsuragi Yuta, Yuki Seino
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0d9f1107772cf5c3f954e985464c7298@oss.nttdata.com
In the various waiting phases of CREATE INDEX CONCURRENTLY (CIC) and
REINDEX CONCURRENTLY (RC), we wait for other processes to release their
snapshots; this is necessary in general for correctness. However,
processes doing CIC in other tables cannot possibly affect CIC or RC
done in "this" table, so we don't need to wait for those. This commit
adds a flag in MyProc->statusFlags to indicate that the current process
is doing CIC, so that other processes doing CIC or RC can ignore it when
waiting.
Note that this logic is only valid if the index does not access other
tables. For simplicity we avoid setting the flag if the index has a
column that's an expression, or has a WHERE predicate. (It is possible
to have expressional or partial indexes that do not access other tables,
but figuring that out would require more work.)
This flag can potentially also be used by processes doing REINDEX
CONCURRENTLY to be skipped; and by VACUUM to ignore processes in CIC or
RC for the purposes of computing an Xmin. That's left for future
commits.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Dimitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20200810233815.GA18970@alvherre.pgsql
Historically, psql has truncated the text of a column's default
expression at 128 characters. This is unlike any other behavior
in describe.c, and it's become particularly confusing now that
the limit is only applied to the expression proper and not to
the "generated always as (...) stored" text that may get wrapped
around it.
Excavation in our git history suggests that the original motivation
for this limit was not really to limit the display width (as I'd long
supposed), but to make it safe to use a fixed-width output buffer to
store the result. That implementation restriction is long gone of
course, but the limit remained. Let's just get rid of it.
While here, rearrange the logic about when to free the output string
so that it's not so dependent on unstated assumptions about the
possible values of attidentity and attgenerated.
Per bug #16743 from David Turon. Back-patch to v12 where GENERATED
came in. (Arguably we could take it back further, but I'm hesitant
to change the behavior of long-stable branches for this.)
Discussion: https://postgr.es/m/16743-7b1bacc4af76e7ad@postgresql.org
Up to now, we sent a ParameterStatus message to the client immediately
upon any change in the active value of any GUC_REPORT variable. This
was only barely okay when the feature was designed; now that we have
things like function SET clauses, there are very plausible use-cases
where a GUC_REPORT variable might change many times within a query
--- and even end up back at its original value, perhaps. Fortunately
most of our GUC_REPORT variables are unlikely to be changed often;
but there are proposals in play to enlarge that set, or even make it
user-configurable.
Hence, let's fix things to not generate more than one ParameterStatus
message per variable per query, and to not send any message at all
unless the end-of-query value is different from what we last reported.
Discussion: https://postgr.es/m/5708.1601145259@sss.pgh.pa.us
The hint "Is another postmaster already running ..." should only be
printed for errors that are really about something else already using
the address. In other cases it is misleading. So only show that hint
if errno == EADDRINUSE.
Also, since Unix-domain sockets in the file-system namespace never
report EADDRINUSE for an existing file (they would just overwrite it),
the part of the hint saying "If not, remove socket file \"%s\" and
retry." can never happen, so remove it. Unix-domain sockets in the
abstract namespace can report EADDRINUSE, but in that case there is no
file to remove, so the hint doesn't work there either.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/6dee8574-b0ad-fc49-9c8c-2edc796f0033@2ndquadrant.com
This is a variant of the normal Unix-domain sockets that don't use the
file system but a separate "abstract" namespace. At the user
interface, such sockets are represented by names starting with "@".
Supported on Linux and Windows right now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/6dee8574-b0ad-fc49-9c8c-2edc796f0033@2ndquadrant.com
The buildfarm animal walleye, running MinGW 8.1 has been having problems
ever since 697e1d02f and 913ec71d6 went in. This appears to be a bug in
assembler which was fixed in a later version.
For now, in order to get that animal running green again, let's just
define pg_attribute_cold and pg_attribute_hot to be empty macros on that
compiler. Hopefully, we can get the support of the owner of the animal to
upgrade to a less buggy compiler and revert this at a later date.
Discussion: https://postgr.es/m/286560.1606233316@sss.pgh.pa.us
currtid() and currtid2() are an undocumented set of functions whose sole
known user is the Postgres ODBC driver, able to retrieve the latest TID
version for a tuple given by the caller of those functions.
As used by Postgres ODBC, currtid() is a shortcut able to retrieve the
last TID loaded into a backend by passing an OID of 0 (magic value)
after a tuple insertion. This is removed in this commit, as it became
obsolete after the driver began using "RETURNING ctid" with inserts, a
clause supported since Postgres 8.2 (using RETURNING is better for
performance anyway as it reduces the number of round-trips to the
backend).
currtid2() is still used by the driver, so this remains around for now.
Note that this function is kept in its original shape for backward
compatibility reasons.
Per discussion with many people, including Andres Freund, Peter
Eisentraut, Álvaro Herrera, Hiroshi Inoue, Tom Lane and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20200603021448.GB89559@paquier.xyz
Previously this code assumed that all IndexScan nodes supported
mark/restore, which is not true since it depends on optional index AM
support functions. This could lead to errors about missing support
functions in rare edge cases of mergejoins with no sort keys, where an
unordered non-btree index scan was placed on the inner path without a
protecting Materialize node. (Normally, the fact that merge join
requires ordered input would avoid this error.)
Backpatch all the way since this bug is ancient.
Per report from Eugen Konkov on irc.
Discussion: https://postgr.es/m/87o8jn50be.fsf@news-spur.riddles.org.uk
1fa22a43a was a quick fix for portability problem I introduced in
697e1d02f. 1fa22a43a adds a few more cases to the preprocessor logic than
I'd have liked. Andres Freund and Dagfinn Ilmari Mannsåker suggested a
better way to do this.
In passing, also adjust the only current usage of these macros so that the
macro comes before the function's return type in the declaration of the
function. This now matches what the definition of the function does.
Discussion: https://postgr.es/m/20200625163553.lt6wocbjhklp5pl4@alap3.anarazel.de
Discussion: https://postgr.es/m/87pn43bmok.fsf@wibble.ilmari.org
I'm having a hard time telling whether the letter of the C standard
requires this, but we do have a couple of buildfarm members that
throw warnings when this is not done. Oversight in c532d15dd.
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
This should fix the breakages caused by 697e1d02f, which seems to break
the build for GCC version < 5.
It seems, according to the GCC manual that __has_attribute is a "special
operator" and must be tested without any other conditions in the
preprocessor test.
Per recommendation from the GCC manual via Greg Nancarrow
Reported-by: Greg Nancarrow
Discussion: https://postgr.es/m/CAJcOf-euSu8fhC10v476o9dqnjqKysVs1_vRms-_fvajpZ3kFw@mail.gmail.com
Here we use a bit of preprocessor trickery to coax supporting compilers
into laying out their generated code so that the code that's in the same
branch as elog(ERROR)/ereport(ERROR) calls is moved away from the hot
path. Effectively, this reduces the size of the hot code meaning that it
can sit on fewer cache lines.
Performance improvements of between 10-15% have been seen on highly CPU
bound workloads using pgbench's TPC-b benchmark.
What's achieved here is very similar to putting the error condition inside
an unlikely() macro. For example;
if (unlikely(x < 0))
elog(ERROR, "invalid x value");
now there's no need to make use of unlikely() here as the common macro
used by elog and ereport will now see that elevel is >= ERROR and make use
of a pg_attribute_cold marked version of errstart().
When elevel < ERROR or if it cannot be determined to be constant, the
original behavior is maintained.
Author: David Rowley
Reviewed-by: Andres Freund, Peter Eisentraut
Discussion: https://postgr.es/m/CAApHDvrVpasrEzLL2er7p9iwZFZ%3DJj6WisePcFeunwfrV0js_A%40mail.gmail.com
For compilers supporting __has_attribute and __has_attribute (hot/cold).
__has_attribute is supported on gcc >= 5, clang >= 2.9 and icc >= 17.
A followup commit will implement some usages of these macros.
Author: David Rowley
Reviewed-by: Andres Freund, Peter Eisentraut
Discussion: https://postgr.es/m/CAApHDvrVpasrEzLL2er7p9iwZFZ%3DJj6WisePcFeunwfrV0js_A%40mail.gmail.com
While cancelling an autovacuum worker, we hold ProcArrayLock while
formatting a debugging log string. We can make this shorter by saving
the data we need to produce the message and doing the formatting outside
the locked region.
This isn't terribly critical, as it only occurs pretty rarely: when a
backend runs deadlock detection and it happens to be blocked by a
autovacuum running autovacuum. Still, there's no need to cause a hiccup
in ProcArrayLock processing, which can be very high-traffic in some
cases.
While at it, rework code so that we only print the string when it is
really going to be used, as suggested by Michael Paquier.
Discussion: https://postgr.es/m/20201118214127.GA3179@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Historically these were called >^ and <^, but that is inconsistent
with the similar box, polygon, and circle operators, which are named
|>> and <<| respectively. Worse, the >^ and <^ names are used for
*not* strict above/below tests for the box type.
Hence, invent new operators following the more common naming. The
old operators remain available for now, and are still accepted by
the relevant index opclasses too. But there's a deprecation notice,
so maybe we can get rid of them someday.
Emre Hasegeli, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us
Clarify that you can "insert" into a generated column as long as what
you're inserting is a DEFAULT placeholder.
Also, use ERRCODE_GENERATED_ALWAYS in place of ERRCODE_SYNTAX_ERROR;
there doesn't seem to be any reason to use the less specific errcode.
Discussion: https://postgr.es/m/9q0sgcr416t.fsf@gmx.us
A few sanity checks in funcapi.c were not mentioning all the possible
clauses for failure, confusing developers who fat-fingered catalog data
additions. Make the errors more detailed to avoid wasting time in
pinpointing mistakes.
Per complaint from Craig Ringer.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMsr+YH7Kd87A3cU5m_wKo46HPQ46zFv5wesFNL0YWxkGhGv3g@mail.gmail.com
Copy.c has grown really large. Split it into more manageable parts:
- copy.c now contains only a few functions that are common to COPY FROM
and COPY TO.
- copyto.c contains code for COPY TO.
- copyfrom.c contains code for initializing COPY FROM, and inserting the
tuples to the correct table.
- copyfromparse.c contains code for reading from the client/file/program,
and parsing the input text/CSV/binary format into tuples.
All of these parts are fairly complicated, and fairly independent of each
other. There is a patch being discussed to implement parallel COPY FROM,
which will add a lot of new code to the COPY FROM path, and another patch
which would allow INSERTs to use the same multi-insert machinery as COPY
FROM, both of which will require refactoring that code. With those two
patches, there's going to be a lot of code churn in copy.c anyway, so now
seems like a good time to do this refactoring.
The CopyStateData struct is also split. All the formatting options, like
FORMAT, QUOTE, ESCAPE, are put in a new CopyFormatOption struct, which
is used by both COPY FROM and TO. Other state data are kept in separate
CopyFromStateData and CopyToStateData structs.
Reviewed-by: Soumyadeep Chakraborty, Erik Rijkers, Vignesh C, Andres Freund
Discussion: https://www.postgresql.org/message-id/8e15b560-f387-7acc-ac90-763986617bfb%40iki.fi
One can say "INSERT INTO tab(generated_col) VALUES (DEFAULT)" and not
draw an error. But the equivalent case for a multi-row VALUES list
always threw an error, even if one properly said DEFAULT in each row.
Fix that. While here, improve the test cases for nearby logic about
OVERRIDING SYSTEM/USER values.
Dean Rasheed
Discussion: https://postgr.es/m/9q0sgcr416t.fsf@gmx.us
Since we're assuming IEEE floats these days, there seems little
reason not to do this. It has the advantage that when the slope is
computed as infinite due to the presence of Inf coordinates, we get
saner behavior than before from line_construct(), and thence also
in some dependent operations such as finding the closest point.
Also fix line_construct() to special-case slope zero. The previous
coding got the right answer in most cases, but it could compute
C as NaN when the point has Inf coordinates.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
"FPeq(infinity, infinity)" returned false, on account of getting NaN
when it subtracts the two inputs. Fix that by adding a separate
check for exact equality.
FPle() and FPge() similarly got the wrong answer for two like-signed
infinities. In those cases, we can just rearrange the comparisons
to avoid potentially subtracting infinities.
While the sibling functions FPne() etc accidentally gave the right
answers even with the internal NaN results, it seems best to make
similar adjustments to them to avoid depending on this.
FPeq() has to be converted to an inline function to avoid double
evaluations of its arguments, and I did the same for the others
just for consistency.
In passing, make the handling of NaN cases in line_eq() and
point_eq_point() simpler and easier to reason about, and perhaps
faster.
This results in just one visible regression test change: slope()
now gives DBL_MAX for two inputs of (inf,1e300), which is consistent
with what it does for (1e300,inf), so that seems like a bug fix.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Add another edge-case value to "point_tbl", and add a test for
the line(point, point) function.
Some of the behaviors exposed here are wrong, but the idea of
committing this separately is to memorialize what we were getting,
and to allow easier inspection of the behavior changes caused by
upcoming patches.
Kyotaro Horiguchi (line() test added by me)
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
As per discussion with Peter Eisentraunt, the SQL standard specifies
that any tuple insertion done as part of CREATE TABLE AS happens without
any extra ACL check, so it makes little sense to keep a check for INSERT
privileges when using WITH DATA. Materialized views are not part of the
standard, but similarly, this check can be confusing as this refers to
an access check on a table created within the same command as the one
that would insert data into this table.
This commit removes the INSERT privilege check for WITH DATA, the
default, that 846005e removed partially, but only for WITH NO DATA.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/d049c272-9a47-d783-46b0-46665b011598@enterprisedb.com
Remove the ability to select random number generator independently from
SSL library. Instead, use the random number generator from the SSL
library (today only OpenSSL supported) if one is configured. If no SSL
library is configured, use the platform default (which means use
CryptoAPI on Win32 and /dev/urandom on Linux).
This also restructures pg_strong_random.c to have three clearly separate
sections, one for each implementation, with two functions in each,
instead of a scattered set of ifdefs throughout the whole file.
Author: Daniel Gustafsson, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/632623.1605460616@sss.pgh.pa.us
Previously, when restore_command claimed to succeed but failed to restore
the file with the right name, for example, due to mis-configuration of
restore_command, no log message was reported. Then the recovery failed
later with an error message not directly related to the issue.
This commit changes the recovery so that a log message is emitted in
this error case. This would enable us to investigate what happened in
this case more easily.
Author: Jeff Janes, Fujii Masao
Reviewed-by: Pavel Borisov, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAMkU=1xkFs3Omp4JR4wMYWdam_KLuj6LXnTYfU8u3T0h=PLLMQ@mail.gmail.com
We previously put the -isysroot switch only into CPPFLAGS, theorizing
that it was only needed to find the right copies of include files.
However, it seems that we also need to use it while linking programs,
to find the right stub ".tbd" files for libraries. We got away
without that up to now, but apparently that was mostly luck. It may
also be that failures are only observed when the Xcode version is
noticeably out of sync with the host macOS version; the case that's
prompting action right now is that builds fail when using latest Xcode
(12.2) on macOS Catalina, even though it's fine on Big Sur.
Hence, add -isysroot to LDFLAGS as well. (It seems that the more
common practice is to put it in CFLAGS, whence it'd be included at
both compile and link steps. However, we can't mess with CFLAGS in
the platform template file without confusing configure's logic for
choosing default CFLAGS.)
This should be back-patched, but first let's see if the buildfarm
likes it on HEAD.
Report and patch by James Hilliard (some cosmetic mods by me)
Discussion: https://postgr.es/m/20201120003314.20560-1-james.hilliard1@gmail.com
This feature was added a long time ago, in 7c1e67bd5 and eb121ba2c,
but never documented in any user-facing way. (Documentation added
in 6126d3e70 was commented out almost immediately, in 8272fc3f7.)
That's because, while this syntax is defined by SQL:99, our
implementation is only vaguely related to the standard's semantics.
The standard appears to intend a run-time not parse-time test, and
it definitely intends that the test should understand subtype
relationships.
No one has stepped up to fix that in the intervening years, but
people keep coming across the code and asking why it's not documented.
Let's just get rid of it: if anyone ever wants to make it work per
spec, they can easily recover whatever parts of this code are still
of value from our git history.
If there's anyone out there who's actually using this despite its
undocumented status, they can switch to using pg_typeof() instead,
eg. "pg_typeof(something) = 'mytype'::regtype". That gives
essentially the same semantics as what our IS OF code did.
(We didn't have that function last time this was discussed, or
we would have ripped out IS OF then.)
Discussion: https://postgr.es/m/CAKFQuwZ2pTc-DSkOiTfjauqLYkNREeNZvWmeg12Q-_69D+sYZA@mail.gmail.com
Discussion: https://postgr.es/m/BAY20-F23E9F2B4DAB3E4E88D3623F99B0@phx.gbl
Discussion: https://postgr.es/m/3E7CF81D.1000203@joeconway.com
Commit 502898192 was too careless about the order of execution of the
additional ALTER TABLE operations generated by expandTableLikeClause.
It just stuck them all at the end, which seems okay for most purposes.
But it falls down in the case where LIKE is importing a primary key
or unique index and the outer CREATE TABLE includes a FOREIGN KEY
constraint that needs to depend on that index. Weird as that is,
it used to work, so we ought to keep it working.
To fix, make parse_utilcmd.c insert LIKE clauses between index-creation
and FK-creation commands in the transformed list of commands, and change
utility.c so that the commands generated by expandTableLikeClause are
executed immediately not at the end. One could imagine scenarios where
this wouldn't work either; but currently expandTableLikeClause only
makes column default expressions, CHECK constraints, and indexes, and
this ordering seems fine for those.
Per bug #16730 from Sofoklis Papasofokli. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16730-b902f7e6e0276b30@postgresql.org
In 01e658fa74, the hash_func test
creates a type t1, but apparently a test running in parallel might
also use that name, depending on timing. Rename the type to avoid the
issue.
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Similarly to 3636efa, the checks done in pg_dump when parsing array
values from catalogs have been too lax. Under memory pressure, it could
be possible, though very unlikely, to finish with dumps that miss some
data like:
- Statistics for indexes
- Run-time configuration of functions
- Configuration of extensions
- Publication list for a subscription
No backpatch is done as this is not going to be a problem in practice.
For example, if an OOM causes an array parsing to fail, a follow-up code
path of pg_dump would most likely complain with an allocation failure
due to the memory pressure.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20201111061319.GE2276@paquier.xyz
We don't actually need a lock to set PGPROC->statusFlags itself; what we
do need is a shared lock on either XidGenLock or ProcArrayLock in order to
ensure MyProc->pgxactoff keeps still while we modify the mirror array in
ProcGlobal->statusFlags. Some places were using an exclusive lock for
that, which is excessive. Relax those to use shared lock only.
procarray.c has a couple of places with somewhat brittle assumptions
about PGPROC changes: ProcArrayEndTransaction uses only shared lock, so
it's permissible to change MyProc only. On the other hand,
ProcArrayEndTransactionInternal also changes other procs, so it must
hold exclusive lock. Add asserts to ensure those assumptions continue
to hold.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201117155501.GA13805@alvherre.pgsql
- Test hashing of an array of a non-hashable element type.
- Test UNION [DISTINCT] with hash- and sort-based plans. (Previously,
only INTERSECT and EXCEPT where tested there.)
- Test UNION [DISTINCT] with a non-hashable column type. This
currently reverts to a sort-based plan even if enable_hashagg is on.
- Test UNION/INTERSECT/EXCEPT hash- and sort-based plans with arrays
as column types. Also test an array with a non-hashable element
type.
- Test UNION/INTERSECT/EXCEPT similarly with row types as column
types. Currently, this uses only sort-based plans because there is
no hashing support for row types.
- Add a test case that shows that recursive queries using UNION
[DISTINCT] require hashable column types.
- Add a currently failing test that uses UNION DISTINCT in a
cycle-detection use case using row types as column types.
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Streamline handling of the various strategies that we have to avoid a
page split in nbtinsert.c. When it looks like a leaf page is about to
overflow, we now perform deleting LP_DEAD items and deduplication in one
central place. This greatly simplifies _bt_findinsertloc().
This has an independently useful consequence: nbtree no longer relies on
the BTP_HAS_GARBAGE page level flag/hint for anything important. We
still set and unset the flag in the same way as before, but it's no
longer treated as a gating condition when considering if we should check
for already-set LP_DEAD bits. This happens at the point where the page
looks like it might have to be split anyway, so simply checking the
LP_DEAD bits in passing is practically free. This avoids missing
LP_DEAD bits just because the page-level hint is unset, which is
probably reasonably common (e.g. it happens when VACUUM unsets the
page-level flag without actually removing index tuples whose LP_DEAD-bit
was set recently, after the VACUUM operation began but before it reached
the leaf page in question).
Note that this isn't a big behavioral change compared to PostgreSQL 13.
We were already checking for set LP_DEAD bits regardless of whether the
BTP_HAS_GARBAGE page level flag was set before we considered doing a
deduplication pass. This commit only goes slightly further by doing the
same check for all indexes, even indexes where deduplication won't be
performed.
We don't completely remove the BTP_HAS_GARBAGE flag. We still rely on
it as a gating condition with pg_upgrade'd indexes from before B-tree
version 4/PostgreSQL 12. That makes sense because we sometimes have to
make a choice among pages full of duplicates when inserting a tuple with
pre version 4 indexes. It probably still pays to avoid accessing the
line pointer array of a page there, since it won't yet be clear whether
we'll insert on to the page in question at all, let alone split it as a
result.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz%3DYpc1PDdk8OVJDChGJBjT06%3DA0Mbv9HyTLCsOknGcUFg%40mail.gmail.com
Stop naming special area/opaque pointer variables 'lpageop' in contexts
where it doesn't make sense. This is a holdover from a time when logic
that performs tasks that are now spread across _bt_insertonpg(),
_bt_findinsertloc(), and _bt_split() was more centralized. 'lpageop'
denotes "left page", which doesn't make sense outside of contexts in
which there isn't also a right page.
Also acquire page flag variables up front within _bt_insertonpg(). This
makes it closer to _bt_split() following refactoring commit bc3087b626.
This allows the page split and retail insert paths to both make use of
the same variables.
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Otherwise, if FDDEBUG is enabled, the debugging output fails because
it tries to read the fileName, which isn't set up yet (and should in
fact always be NULL).
AFAICT, this has been wrong since Berkeley. Before 96bf88d52,
it would accidentally fail to crash on platforms where snprintf()
is forgiving about being passed a NULL pointer for %s; but the
file name intended to be included in the debug output wouldn't
ever have shown up.
Report and fix by Greg Nancarrow. Although this is only visibly
broken in custom-made builds, it still seems worth back-patching
to all supported branches, as the FDDEBUG code is pretty useless
as it stands.
Discussion: https://postgr.es/m/CAJcOf-cUDgm9qYtC_B6XrC6MktMPNRby2p61EtSGZKnfotMArw@mail.gmail.com
Since this function is used as a CHECK constraint condition,
returning NULL is tantamount to returning TRUE, which would have the
effect of letting in a row that doesn't satisfy the hash condition.
Admittedly, the cases for which this is done should be unreachable
in practice, but that doesn't make it any less a bad idea. It also
seems like a dartboard was used to decide which error cases should
throw errors as opposed to returning NULL.
For the checks for NULL input values, I just switched it to returning
false. There's some argument that an error would be better; but the
case really should be can't-happen in a generated hash constraint,
so it's likely not worth more code for.
For the parent-relation-open-failure case, it seems like we might
as well let relation_open throw an error, instead of having an
impossible-to-diagnose constraint failure.
Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/24067.1605134819@sss.pgh.pa.us
This was evidently missed in commit 6337865f3, which generally did
s/TRUE/true/ everywhere. It escaped notice up to now because ICU
versions before ICU 68 provided definitions of "TRUE" and "FALSE"
regardless. With ICU 68, it fails to compile.
Per report from Condor. Back-patch to v11 where 6337865f3 came in.
(I've not tested v10, where this call originated, but I imagine
it's fine since we defined TRUE in c.h back then.)
Discussion: https://postgr.es/m/7a6f3336165bfe3ca66abcda7966f9d0@stz-bg.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
When specified, WITH NO DATA does not insert any data into the relation
created, so skip checking for the insert permissions. With WITH DATA or
WITH NO DATA, it is always required for the user to have CREATE
privileges on the schema targeted for the relation.
Note that plain CREATE TABLE AS or CREATE MATERIALIZED VIEW queries have
begun to work accidentally without INSERT privilege checks as of
874fe3ae, while using EXECUTE or EXPLAIN ANALYZE would fail with the ACL
check, so this makes the behavior for all the command flavors consistent
with each other. This is arguably a bug fix, but there have been no
complaints about the current behavior either so stable branches are not
changed.
While on it, document properly the privileges requirements for each
commands with more tests for all the scenarios possible, and avoid a
useless bulk-insert allocation when using WITH NO DATA.
Author: Bharath Rupireddy
Reviewed-by: Anastasia Lubennikova, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWc3N8j0_9nMPz9wcAUnVcdKHzFdDZJ3hVFNEbqtcyG9w@mail.gmail.com
These flags should be independent: in particular an index AM should
be able to say that it supports include columns without necessarily
supporting multiple key columns. The included-columns patch got
this wrong, possibly aided by the fact that it didn't bother to
update the documentation.
While here, clarify some text about amcanreturn, which was a little
vague about what should happen when amcanreturn reports that only
some of the index columns are returnable.
Noted while reviewing the SP-GiST included-columns patch, which
quite incorrectly (and unsafely) changed SP-GiST to claim
amcanmulticol = true as a workaround for this bug.
Backpatch to v11 where included columns were introduced.
Only a basic logic bug in a _bt_insertonpg() caller could lead to a
violation of this invariant (index corruption won't do it). A "can't
happen" error seems inappropriate (it is arbitrary at best).
Demote the error to a simple assertion. This matches similar nearby
sanity checks.
Buildfarm members that lack both HAVE_LOCALE_T and USE_ICU have been
complaining about pg_newlocale_from_collation's collcollate variable.
This is evidently fallout from commit 7d1297df0, which removed the
only usage outside those two #ifdef'd code paths. Mark the variable
pg_attribute_unused(), like its sibling collctype, which has been that
way for a long time.
The test inserts a row in primary server, waits until the insertion has
been replicated to a cascaded standby, and checks that it's visible there
by querying the cascaded standby. In order for that to work reliably, the
test needs to wait until the insertion WAL record has been fully replayed.
This should fix the occasional buildfarm failures. Diagnosis by Tom Lane.
Discussion: https://www.postgresql.org/message-id/606796.1605424022@sss.pgh.pa.us
This is mostly straightforward. However, we disallow replacing
constraint triggers or changing the is-constraint property; perhaps
that can be added later, but the complexity versus benefit tradeoff
doesn't look very good.
Also, no special thought is taken here for whether replacing an
existing trigger should result in changes to queued-but-not-fired
trigger actions. We just document that if you're surprised by the
results, too bad, don't do that. (Note that any such pending trigger
activity would have to be within the current session.)
Takamichi Osumi, reviewed at various times by Surafel Temesgen,
Peter Smith, and myself
Discussion: https://postgr.es/m/0DDF369B45A1B44B8A687ED43F06557C010BC362@G01JPEXMBYT03
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com
This was marked as BYTEA, but is more like TEXT, which is how we already
pass the history timeline file name. Internally, we don't do any
encoding or bytea escape handling, but TEXT seems closest. This should
cause no behavioral change.
Reported-by: Brar Piening
Discussion: https://postgr.es/m/6a1b9cd9-17e3-df67-be55-86102af6bdf5@gmx.de
Backpatch-through: master
On Windows, a filename cannot contain backslashes, because a backslash
is used directory separator. Remove tests I added in commit 9c4f5192f
that tried to do that. We could perhaps use a SKIP block to only skip
them on Windows, but I'm not sure how exactly to formulate that, so just
remove the tests to make the buildfarm green again.
Per buildfarm.
Using a hot standby server as the source has not been possible, because
pg_rewind creates a temporary table in the source system, to hold the
list of file ranges that need to be fetched. Refactor it to queue up the
file fetch requests in pg_rewind's memory, so that the temporary table
is no longer needed.
Also update the logic to compute 'minRecoveryPoint' correctly, when the
source is a standby server.
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
Commit 1e53fe0e70 changed background processes so that they use
standard SIGHUP handler. Like that, this commit makes walreceiver
use standard SIGHUP and SIGTERM handlers, to simplify the code.
As the side effect of this commit, walreceiver can wake up and process
the configuration files promptly when receiving SIGHUP. Because the
standard SIGHUP handler sets the latch. On the other hand, previously
there could be a time lag between the receipt of SIGHUP and
the process of configuration files since the dedicated handler didn't
set the latch.
Author: Bharath Rupireddy, tweaked by Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Commit 6023b7ea71 allowed pg_stat_statements to track the number
of rows retrieved or affected by some utility commands including
CREATE MATERIALIZED VIEW. However it did not track the rowcount
of REFRESH MATERIALIZED VIEW. This commit allows pg_stat_statements
to track that.
To track that, this commit changes the query completion for
REFRESH MATERIALIZED VIEW so that it saves the rowcount. But note that
the rowcount is still not displayed in the command completion tag output.
That is, the display_rowcount flag of CMDTAG_REFRESH_MATERIALIZED_VIEW
command tag is left false in cmdtaglist.h. Otherwise, the change of
completion tag output might break applications using it.
Author: Katsuragi Yuta, Seino Yuki
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/71f6bc72f8bbaa06e701f8bd2562c347@oss.nttdata.com
Discussion: https://postgr.es/m/aadbfba9-e4bb-9531-6b3a-d13c31c8f4fe@oss.nttdata.com
Attempting to take a base backup with Postgres linking to a build of
OpenSSL with FIPS enabled currently fails with or even without a backup
manifest requested because of this mandatory SHA256 initialization used
for the manifest file itself. However, there is no need to do this
initialization at all if backup manifests are not needed because there
is no data to append to the manifest.
Note that being able to use backup manifests with OpenSSL+FIPS requires
a switch of the SHA2 implementation to use EVP, which would cause an ABI
breakage so this cannot be backpatched to 13 as it has been already
released, but at least avoiding this SHA256 initialization gives users
the possibility to take a base backup even when specifying --no-manifest
with pg_basebackup.
Author: Michael Paquier
Discussion: https://postgr.es/m/20201110020014.GE1887@paquier.xyz
Backpatch-through: 13
pg_nodiscard means the compiler should warn if the result of a
function call is ignored. The name "nodiscard" is chosen in alignment
with (possibly future) C and C++ standards. It maps to the GCC
attribute warn_unused_result.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/e3753562-99cd-b65f-5aca-687dfd1ec2fc@2ndquadrant.com
Two cases violated list APIs by throwing away the return value. While
the code was technically correct, it relied on internal knowledge of
the list implementation, and the code wasn't really gaining anything
that way. It is planned to make this a compiler warning in the
future, so just fix these cases by assigning the return value
properly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/e3753562-99cd-b65f-5aca-687dfd1ec2fc@2ndquadrant.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Summarily changing the STYPE of regression-test aggregates that
depend on array_append or array_cat is an issue for the buildfarm's
cross-version-upgrade tests, because those aggregates (as defined
in the back branches) now won't load into HEAD. Although this seems
like only a minimal risk for genuine user-defined aggregates, we
need to do something for the buildfarm. Hence, adjust the aggregate
definitions, in both HEAD and the back branches.
Discussion: https://postgr.es/m/1401824.1604537031@sss.pgh.pa.us
Discussion: https://postgr.es/m/E1kaQ2c-0005lx-Eg@gemulon.postgresql.org
It's entirely possible to see WAL for a relation that doesn't exist in
the target anymore. That happens when the relation was dropped later.
The refactoring in commit eb00f1d4b broke that case, by sanity-checking
the file type in the target before checking the flag forwhether it
exists there at all.
I noticed this during manual testing. Modify the 001_basic.pl test so
that it covers this case.
LLVM 12, to be released in a few months, made some breaking changes to
the Orc JIT interface. OrcV2 eventually will make it easier to support
features like concurrent JIT compilation, but this commit only allows
to compile against LLVM 12.
This commit is a bit bigger than desirable. That partially is because
the V2 interface is more granular than V1 interface, but also because
I chose to make some minor changes to < LLVM 12 code to keep the code
somewhat readable.
The LLVM 12 support will need to be backpatched. I plan to do so after
the patch stewed on the buildfarm for a few days.
Author: Andres Freund
Discussion: https://postgr.es/m/20201016011244.pmyvr3ee2gbzplq4@alap3.anarazel.de
Remove a CHECK_FOR_INTERRUPTS() call that could never actually handle an
interrupt. We always have a heap page buffer lock at this point.
Having a useless CHECK_FOR_INTERRUPTS() call is harmless but misleading.
It is probably possible to work around the immediate problem by moving
the CHECK_FOR_INTERRUPTS() to before the heap page buffer lock is
acquired. That isn't enough to make the function responsive to
interrupts, though. The index AM caller will still hold an exclusive
buffer lock of its own.
If an interactive psql session used \gset when querying a compromised
server, the attacker could execute arbitrary code as the operating
system account running psql. Using a prefix not found among specially
treated variables, e.g. every lowercase string, precluded the attack.
Fix by issuing a warning and setting no variable for the column in
question. Users wanting the old behavior can use a prefix and then a
meta-command like "\set HISTSIZE :prefix_HISTSIZE". Back-patch to 9.5
(all supported versions).
Reviewed by Robert Haas. Reported by Nick Cleaton.
Security: CVE-2020-25696
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
Coverity complained about a defect in commit 257836a7:
Calling "parsePGArray" without checking return value (as is
done elsewhere 11 out of 13 times).
Fix, and also check for empty strings explicitly (NULL as represented by
PQgetvalue()). That worked correctly before only because parsePGArray()
happens to set *nitems = 0 when it fails on an empty string. Also
convert a sanity check assertion to an error to be more paranoid, and
pgindent a nearby line.
Reported-by: Michael Paquier <michael@paquier.xyz>
This back-patches commit 20d3fe900 into the v12 and v13 branches.
At the time I thought that commit was not fixing any observable
bug, but Bertrand Drouvot showed otherwise: adding a dropped column
to the previously-considered scenario crashes v12 and v13, unless the
dropped column happens to be an integer. That is, of course, because
the tupdesc we derive from the plan output tlist fails to describe
the dropped column accurately, so that we'll do the wrong thing with
a tuple in which that column isn't NULL.
There is no bug in pre-v12 branches because they already did use
the table's real tuple descriptor for any trigger-returned tuple.
It seems that this set of bugs can be blamed on the changes that
removed es_trig_tuple_slot, though I've not attempted to pin that
down precisely.
Although there's no code change needed in HEAD, update the test case
to include a dropped column there too.
Discussion: https://postgr.es/m/db5d97c8-f48a-51e2-7b08-b73d5434d425@amazon.com
Discussion: https://postgr.es/m/16644-5da7ef98a7ac4545@postgresql.org
Commit 257836a7 included an assertion that a version lookup routine is
not trying to look up "C" or "POSIX", but that case is reachable with
the user-facing SQL function pg_collation_actual_version(). Remove the
assertion.
The description of how LP_DEAD bit setting by index scans works
following commit 2ed5b87f was rather unclear. Clean that up a bit.
Also refer to LP_DEAD bit setting within _bt_check_unique() at the start
of the same section. This mechanism may actually be more important than
the generic kill_prior_tuple mechanism that the section focuses on, so
it at least deserves to be mentioned in passing.
* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The buildfarm thinks this leads to memory stomps, though annoyingly
I can't duplicate that here. The existing code in strings.pgc is
doing something that doesn't seem to be sanctioned at all really
by the documentation, but I'm disinclined to try to make that nicer
right now. Let's just declare some more output variables in hopes
of working around it.
These were broken in multiple ways:
* The xbstart and xhstart lexer actions neglected to set
"state_before_str_start" before transitioning to the xb/xh states,
thus possibly resulting in "internal error: unreachable state" later.
* The test for valid string contents at the end of xb state was flat out
wrong, as it accounted incorrectly for the "b" prefix that the xbstart
action had injected. Meanwhile, the xh state had no such check at all.
* The generated literal value failed to include any quote marks.
* The grammar did the wrong thing anyway, typically ignoring the
literal value and emitting something else, since BCONST and XCONST
tokens were handled randomly differently from SCONST tokens.
The first of these problems is evidently an oversight in commit
7f380c59f, but the others seem to be very ancient. The lack of
complaints shows that ECPG users aren't using these syntaxes much
(although I do vaguely remember one previous complaint).
As written, this patch is dependent on 7f380c59f, so it can't go
back further than v13. Given the shortage of complaints, I'm not
excited about adapting the patch to prior branches.
Report and patch by Shenhao Wang (test case adjusted by me)
Discussion: https://postgr.es/m/d6402f1bacb74ecba22ef715dbba17fd@G08CNEXMBPEKD06.g08.fujitsu.local
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Move the system catalog toast table declarations from
catalog/toasting.h to the respective parent tables' catalog/pg_*.h
files. The original reason for having it split was that the old
genbki system produced the output in the order of the catalog files it
read, so all the toasting stuff needed to come separately. But this
is no longer the case, and keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
The list of indexes was being leaked when asked for an index that
doesn't have an index partition in the table partition. Not a common
case admittedly --and in most cases where it occurs, caller throws an
error anyway-- but worth fixing for cleanliness and in case any
third-party code is calling this function.
While at it, remove use of lfirst_oid() to obtain a value we already
have.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201105203606.GF22691@telsasoft.com
This should have been done in the initial commit that made
unix_socket_directories a list as of c9b0cbe. This change allows to
support correctly the case of ALTER SYSTEM, where it is possible to
specify multiple paths as a list, like the following pattern where
flattening is applied to each item:
ALTER SYSTEM SET unix_socket_directories = '/path1', '/path2';
Any parameters specified in postgresql.conf are parsed the same way, so
there is no compatibility change. pg_dump has a hardcoded list of
parameters marked with GUC_LIST_QUOTE, that gets its routine update.
These are reordered alphabetically for clarity.
Author: Ian Lawrence Barwick
Reviewed-by: Peter Eisentraunt, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=iMOtNY6_sUwV=LQVCJ2zgYHBDyNzVfvE5GN3WQ3v9kQg@mail.gmail.com
The table generation script would incorrectly complain in the
recomposition sorting when matching code points. This would not have
caused the generation of an incorrect table. Note that this condition
is not reachable yet, but could have been reached with future updates.
pg_bswap.h does not need to be included in the frontend.x
Author: John Naylor
Discussion: https://postgr.es/m/CAFBsxsGWmExpvv=61vtDKCs7+kBbhkwBDL2Ph9CacziFKnV_yw@mail.gmail.com
brin_form_tuple failed to consider the values may be toasted, inserting
the toast pointer into the index. This may easily result in index
corruption, as the toast data may be deleted and cleaned up by vacuum.
The cleanup however does not care about indexes, leaving invalid toast
pointers behind, which triggers errors like this:
ERROR: missing chunk number 0 for toast value 16433 in pg_toast_16426
A less severe consequence are inconsistent failures due to the index row
being too large, depending on whether brin_form_tuple operated on plain
or toasted version of the row. For example
CREATE TABLE t (val TEXT);
INSERT INTO t VALUES ('... long value ...')
CREATE INDEX idx ON t USING brin (val);
would likely succeed, as the row would likely include toast pointer.
Switching the order of INSERT and CREATE INDEX would likely fail:
ERROR: index row size 8712 exceeds maximum 8152 for index "idx"
because this happens before the row values are toasted.
The bug exists since PostgreSQL 9.5 where BRIN indexes were introduced.
So backpatch all the way back.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Backpatch-through: 9.5
Discussion: https://postgr.es/m/20201001184133.oq5uq75sb45pu3aw@development
Discussion: https://postgr.es/m/20201104010544.zexj52mlldagzowv%40development
Revert 59ab4ac32, as well as the followup fix 33862cb9c, in all
branches. We need to think a bit harder about what the behavior
of LOCK TABLE on views should be, and there's no time for that
before next week's releases. We'll take another crack at this
later.
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Revert 403a3d91c, as well as the followup fix 7f4235032, in all
branches. We need to think a bit harder about what the behavior
of LOCK TABLE on views should be, and there's no time for that
before next week's releases. We'll take another crack at this
later.
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Currently only OpenSSL requires this initialization, but in the future
other SSL implementations are likely to need it as well. Abstracting
this functionality out into a separate function makes this cleaner and
more clear, and also removes the dependency on OpenSSL headers from
fork_process.c.
OpenSSL is special in that we need to initialize this random number
generator even if we're not going to use it directly, until we drop
support for everything prior to OpenSSL 1.1.1. (And of course also if we
actually use it). All other implementations are left empty at this time,
but more are expected to be added in the future.
Author: Daniel Gustafsson <daniel@yesql.se>, Michael Paquier <michael@paquier.xyz>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/F6291C3C-747C-4C93-BCE0-28BB420B1FF5@yesql.se
There is no outright bug here but it is better to be consistent with the
usage at other places in the same file. In the passing, fix a wrong
assertion in pgstat_recv_replslot.
Author: Kyotaro Horiguchi
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/20201104.175523.1704166915688949637.horikyota.ntt@gmail.com
wal_consistency_checking indicated an inconsistency in certain cases
involving nbtree page deletion. The underlying issue is that there was
a minor difference between the page image produced after a REDO routine
ran and the corresponding page image following original execution.
This harmless inconsistency has been around forever. We more or less
expect total consistency among even deleted nbtree pages these days,
though, so this won't do anymore.
To fix, tweak the REDO routine to match original execution.
Oversight in commit f47b5e13.
LOCK TABLE has complained about "infinite recursion" when applied
to a self-referential view, ever since we made it recurse into views
in v11. However, that breaks pg_dump's new assumption that it's
okay to lock every relation. There doesn't seem to be any good
reason to throw an error: if we just abandon the recursion, we've
still satisfied the requirement of locking every referenced relation.
Per bug #16703 from Andrew Bille (via Alexander Lakhin).
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Logic for counting heap TIDs from posting list tuples (added by commit
0d861bbb) was faulty. It didn't count any TIDs/index tuples in the
event of no callback being set. This meant that we incorrectly counted
no index tuples in clean-up only VACUUMs, which could lead to
pg_class.reltuples being spuriously set to 0 in affected indexes.
To fix, go back to counting items from the page in cases where there is
no callback. This approach isn't very accurate, but it works well
enough in practice while avoiding the expense of accessing every index
tuple during cleanup-only VACUUMs.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
https://postgr.es/m/20201023174451.69e358f1@firost
Backpatch: 13-, where nbtree deduplication was introduced
Commit dee663f7 intended to drop any queued up fsync requests before
unlinking segment files, but missed a code path. Fix, by centralizing
the forget-and-unlink code into a single function.
Reported-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/20201104013205.icogbi773przyny5%40development
float4_div and float8_div correctly produced zero for zero divided
by infinity, but threw an underflow error for nonzero finite values
divided by infinity. This seems wrong; at the very least it's
inconsistent with the behavior recently implemented for numeric
infinities. Remove the error and allow zero to be returned.
This patch also removes a useless isinf() test from the overflow
checks in these functions (non-Inf divided by Inf can't produce Inf).
Extracted from a larger patch; this seems significant outside the
context of geometric operators, so it deserves its own commit.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Convert array_append, array_prepend, array_cat, array_position,
array_positions, array_remove, array_replace, and width_bucket
to use anycompatiblearray. This is a simple extension of commit
5c292e6b9 to hit some other places where there's a pretty obvious
gain in usability from doing so.
Ideally we'd also modify other functions taking multiple old-style
polymorphic arguments. But most of the remainder are tied into one
or more operator classes, making any such change a much larger can of
worms than I desire to open right now.
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
This allows use of a "default" expression that doesn't slavishly
match the data column's type. Formerly you got something like
"function lag(numeric, integer, integer) does not exist", which
is not just unhelpful but actively misleading.
The SQL spec suggests that the default should be coerced to the data
column's type, but this implementation instead chooses the common
supertype, which seems at least as reasonable.
(Note: I took the opportunity to run "make reformat-dat-files" on
pg_proc.dat, so this commit includes some cosmetic changes to
recently-added entries that aren't related to lead/lag.)
Vik Fearing
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Gen_fmgrtab.pl treated aggregate functions the same as other built-in
functions, which is wasteful because there is no real need to have
entries for them in the fmgr_builtins[] table. Suppressing those
entries saves about 3KB in the compiled table on my machine; which
is not a lot but it's not nothing either, considering that that
table is pretty "hot". The only outside code change needed is
that ExecInitWindowAgg() can't be allowed to call fmgr_info_cxt()
on a plain aggregate function. But that saves a few cycles anyway.
Having done that, the aggregate_dummy() function is unreferenced
and might as well be dropped. Using "aggregate_dummy" as the prosrc
value for an aggregate is now just a documentation convention not
something that matters. There was some discussion of using NULL
instead to save a few bytes in pg_proc, but we'd have to remove
prosrc's BKI_FORCE_NOT_NULL marking which doesn't seem a great idea.
Anyway, it's possible there's client-side code that expects to
see "aggregate_dummy" there, so I'm loath to change it without a
strong reason.
Discussion: https://postgr.es/m/533989.1604263665@sss.pgh.pa.us
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
hash_array_extended() needs to pass PG_GET_COLLATION() to the hash
function of the element type. Otherwise, the hash function of a
collation-aware data type such as text will error out, since the
introduction of nondeterministic collation made hash functions require
a collation, too.
The consequence of this is that before this change, hash partitioning
using an array over text in the partition key would not work.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/32c1fdae-95c6-5dc6-058a-a90330a3b621%40enterprisedb.com
This makes the abstraction of a "source" server more clear, by introducing
a common abstract class, borrowing the object-oriented programming term,
that represents all the operations that can be done on the source server.
There are two implementations of it, one for fetching via libpq, and
another to fetch from a local directory. This adds some code, but makes it
easier to understand what's going on.
The copy_executeFileMap() and libpq_executeFileMap() functions contained
basically the same logic, just calling different functions to fetch the
source files. Refactor so that the common logic is in one place, in a new
function called perform_rewind().
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
Deciding what to do with each file is now a separate step after all the
necessary information has been gathered. It is more clear that way.
Previously, the decision-making was divided between process_source_file()
and process_target_file(), and it was a bit hard to piece together what
the overall rules were.
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Accept that we can't get versions for such locale names for now. Users
will need to specify the newer language tag format to enable the
collation versioning feature. It's not clear that we can do automatic
conversion from the old style to the new style reliably enough for this
purpose.
Unfortunately, this means that collation versioning probably won't work
for the default collation unless you provide something like en-US at
initdb or CREATE DATABASE time (though, for reasons not yet understood,
it does seem to work on some systems). It'd be nice to find a better
solution, or document this quirk if we settle on it, but this should
unbreak the 3 failing build farm animals in the meantime.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
When considering Incremental Sort below a Gather Merge, we need to be
a bit more careful when matching pathkeys to EC members. It's not enough
to find a member whose Vars are all in the current relation's target;
volatile expressions in particular need to be contained in the target,
otherwise it's too early to use the pathkey.
Reported-by: Jaime Casanova
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13, where the incremental sort code was added
Discussion: https://postgr.es/m/CAJGNTeNaxpXgBVcRhJX%2B2vSbq%2BF2kJqGBcvompmpvXb7pq%2BoFA%40mail.gmail.com
If the planner erroneously puts a non-parallel-safe SubPlan into
a parallelized portion of the query tree, nodeSubplan.c will fail
in the worker processes because it finds a null in es_subplanstates,
which it's unable to cope with. It seems worth a test-and-elog to
make that an error case rather than a core dump case.
This probably should have been included in commit 16ebab688, which
was responsible for allowing nulls to appear in es_subplanstates
to begin with. So, back-patch to v10 where that came in.
Discussion: https://postgr.es/m/924226.1604422326@sss.pgh.pa.us
The intention in commit 491c029db was to require superuserness to
change the BYPASSRLS property, but the actual effect of the coding
in AlterRole() was to require superuserness to change anything at all
about a BYPASSRLS role. Other properties of a BYPASSRLS role should
be changeable under the same rules as for a normal role, though.
Fix that, and also take care of some documentation omissions related
to BYPASSRLS and REPLICATION role properties.
Tom Lane and Stephen Frost, per bug report from Wolfgang Walther.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
The current implementation cannot handle this correctly, so just
forbid it for now.
GENERATED clauses must be attached to the column definition and cannot
be added later like DEFAULT, so if a child table has a generation
expression that the parent does not have, the child column will
necessarily be an attlocal column. So to implement ALTER TABLE ONLY /
DROP EXPRESSION, we'd need extra code to update attislocal of the
direct child tables, somewhat similar to how DROP COLUMN does it, so
that the resulting state can be properly dumped and restored.
Discussion: https://www.postgresql.org/message-id/flat/15830.1575468847%40sss.pgh.pa.us
Remove old containment operators @ and ~ for built-in geometry data
types. These have been deprecated; use <@ and @> instead.
(Some contrib modules still contain the same deprecated operators.
That will be dealt with separately.)
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/20201027032511.GF9241@telsasoft.com
Commit 3a9ae3d206 (back in 2006) deprecated TG_RELNAME
in favor of TG_TABLE_NAME, but the existing usage in test
cases has remained till today. Change to use TG_TABLE_NAME
instead (TG_RELNAME is still covered by a test case).
Commit d94c36a45a introduced error handling to sslinfo to handle
OpenSSL errors gracefully. This ports this errorhandling to the
backend TLS implementation.
Author: Daniel Gustafsson <daniel@yesql.se>
fill_hba_line() thought it could get away with passing sizeof(struct
sockaddr_storage) rather than the actual addrlen previously returned
by getaddrinfo(). While that appears to work on many platforms,
it does not work on FreeBSD 11: you get back a failure, which leads
to the view showing NULL for the address and netmask columns in all
rows. The POSIX spec for getnameinfo() is pretty clearly on
FreeBSD's side here: you should pass the actual address length.
So it seems plausible that there are other platforms where this
coding also fails, and we just hadn't noticed.
Also, IMO the fact that getnameinfo() failure leads to a NULL output
is pretty bogus in itself. Our pg_getnameinfo_all() wrapper is
careful to emit "???" on failure, and we should use that in such
cases. NULL should only be emitted in rows that don't have IP
addresses.
Per bug #16695 from Peter Vandivier. Back-patch to v10 where this
code was added.
Discussion: https://postgr.es/m/16695-a665558e2f630be7@postgresql.org
make_ruledef() and make_viewdef() were coded to cope with possible
null-ness of these columns, but they've been marked BKI_FORCE_NOT_NULL
for some time. So there's not really any need to do more than what
we do for the other columns of pg_rewrite, i.e. just Assert that
we got non-null results.
(There is a school of thought that says Asserts aren't the thing
to do to check for corrupt data, but surely here is not the place
to start if we want such a policy.)
Also, remove long-dead-if-indeed-it-ever-wasn't-dead handling of
an empty actions list in make_ruledef(). That's an error case
and should be treated as such. (DO INSTEAD NOTHING is represented
by a CMD_NOTHING Query, not an empty list; cf transformRuleStmt.)
Kyotaro Horiguchi, some changes by me
Discussion: https://postgr.es/m/CAEudQApoA=tMTic6xEPYP_hsNZ8XtToVThK_0x7D_aFQYowq3w@mail.gmail.com
Traditionally, the names of fmgroids.h macros for pg_proc OIDs
have been constructed from the prosrc field. But sometimes the
same C function underlies multiple pg_proc entries, forcing us
to make an arbitrary choice of which OID to reference; the other
entries are then not namable via fmgroids.h. Moreover, we could
not have macros at all for pg_proc entries that aren't for
C-coded functions.
Instead, use the proname field, and append the proargtypes field
(replacing inter-argument spaces with underscores) if proname is
not unique. Special-casing unique entries such as F_OIDEQ removes
the need to change a lot of code. Indeed, I can only find two
places in the tree that need to be adjusted; while this changes
quite a few existing entries in fmgroids.h, few of them are
referenced from C code.
With this patch, all entries in pg_proc.dat have macros in fmgroids.h.
Discussion: https://postgr.es/m/472274.1604258384@sss.pgh.pa.us
On detecting a corrupted match tag, pglz_decompress() should just
summarily return -1. Breaking out of the loop, as I did in dfc797730,
doesn't quite guarantee that will happen. Also, we can use
unlikely() on that check, just in case it helps.
Backpatch to v13, like the previous patch.
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
Provide a place for the version of referenced database objects to be
recorded. A follow-up commit will use this to record dependencies on
collation versions for indexes, but similar ideas for other kinds of
objects have also been mooted.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This was broken recently by a929e17e5. I'd failed to remember that
parallel tests should have their EXPLAIN output run through the
explain_parallel_append function so that the output is stable when
parallel workers fail to start.
fairywren was first to notice.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20201102062951.GB15770@paquier.xyz
Logical replication protocol uses a single byte character to identify a
message type in logical replication protocol. The code uses string
literals for the same. Use Enum so that
1. All the string literals used can be found at a single place. This
makes it easy to add more types without the risk of conflicts.
2. It's easy to locate the code handling a given message type.
3. When used with switch statements, it is easy to identify the missing
cases using -Wswitch.
Author: Ashutosh Bapat
Reviewed-by: Kyotaro Horiguchi, Andres Freund, Peter Smith and Amit Kapila
Discussion: https://postgr.es/m/CAExHW5uPzQ7L0oAd_ENyvaiYMOPgkrAoJpE+ZY5-obdcVT6NPg@mail.gmail.com
Previously we only tagged on the required information to allow the
executor to perform run-time partition pruning for Append/MergeAppend
nodes belonging to base relations. It was thought that nested
Append/MergeAppend nodes were just about always pulled up into the
top-level Append/MergeAppend and that making the run-time pruning info for
any sub Append/MergeAppend nodes was a waste of time. However, that was
likely badly thought through.
Some examples of cases we're unable to pullup nested Append/MergeAppends
are: 1) Parallel Append nodes with a mix of parallel and non-parallel
paths into a Parallel Append. 2) When planning an ordered Append scan a
sub-partition which is unordered may require a nested MergeAppend path to
ensure sub-partitions don't mix up the order of tuples being fed into the
top-level Append.
Unfortunately, it was not just as simple as removing the lines in
createplan.c which were purposefully not building the run-time pruning
info for anything but RELOPT_BASEREL relations. The code in
add_paths_to_append_rel() was far too sloppy about which partitioned_rels
it included for the Append/MergeAppend paths. The original code there
would always assume accumulate_append_subpath() would pull each sub-Append
and sub-MergeAppend path into the top-level path. While it does not
appear that there were any actual bugs caused by having the additional
partitioned table RT indexes recorded, what it did mean is that later in
planning, when we built the run-time pruning info that we wasted effort
and built PartitionedRelPruneInfos for partitioned tables that we had no
subpaths for the executor to run-time prune.
Here we tighten that up so that partitioned_rels only ever contains the RT
index for partitioned tables which actually have subpaths in the given
Append/MergeAppend. We can now Assert that every PartitionedRelPruneInfo
has a non-empty present_parts. That should allow us to catch any weird
corner cases that have been missed.
In passing, it seems there is no longer a good reason to have the
AppendPath and MergeAppendPath's partitioned_rel fields a List of IntList.
We can simply have a List of Relids instead. This is more compact in
memory and faster to add new members to. We still know which is the root
level partition as these always have a lower relid than their children.
Previously this field was used for more things, but run-time partition
pruning now remains the only user of it and it has no need for a List of
IntLists.
Here we also get rid of the RelOptInfo partitioned_child_rels field. This
is what was previously used to (sometimes incorrectly) set the
Append/MergeAppend path's partitioned_rels field. That was the only usage
of that field, so we can happily just remove it.
I also couldn't resist changing some nearby code to make use of the newly
added for_each_from macro so we can skip the first element in the list
without checking if the current item was the first one on each
iteration.
A bug report from Andreas Kretschmer prompted all this work, however,
after some consideration, I'm not personally classing this as a bug fix.
So no backpatch. In Andreas' test case, it just wasn't that clear that
there was a nested Append since the top-level Append just had a single
sub-path which was pulled up a level, per 8edd0e794.
Author: David Rowley
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/flat/CAApHDvqSchs%2BubdybcfFaSPB%2B%2BEA7kqMaoqajtP0GtZvzOOR3g%40mail.gmail.com
pglz_maximum_compressed_size() potentially underestimated the amount
of compressed data required to produce N bytes of decompressed data;
this is a fault in commit 11a078cf8.
Separately from that, pglz_decompress() failed to protect itself
against corrupt compressed data, particularly off == 0 in a match
tag. Commit c60e520f6 turned such a situation into an infinite loop,
where before it'd just have resulted in garbage output.
The combination of these two bugs seems like it may explain bug #16694
from Tom Vijlbrief, though it's impossible to be quite sure without
direct inspection of the failing session. (One needs to assume that
the pglz_maximum_compressed_size() bug caused us to fail to fetch the
second byte of a match tag, and what happened to be there instead was
a zero. The reported infinite loop is hard to explain without off == 0,
though.)
Aside from fixing the bugs, rewrite associated comments for more
clarity.
Back-patch to v13 where both these commits landed.
Discussion: https://postgr.es/m/16694-f107871e499ec114@postgresql.org
Although error results received from the backend should always have
a SQLSTATE field, ones generated by libpq won't, making this code
vulnerable to a crash after, say, untimely loss of connection.
Noted by Coverity.
Oversight in commit 403a3d91c. Back-patch to 9.5, as that was.
Statistics associated to an index got lost after running REINDEX
CONCURRENTLY, while the non-concurrent case preserves these correctly.
The concurrent and non-concurrent operations need to be consistent for
the end-user, and missing statistics would force to wait for a new
analyze to happen, which could take some time depending on the activity
of the existing autovacuum workers. This issue is fixed by copying any
existing entries in pg_statistic associated to the old index to the new
one. Note that this copy is already done with the data of the index in
the stats collector.
Reported-by: Fabrízio de Royes Mello
Author: Michael Paquier, Fabrízio de Royes Mello
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAFcNs+qpFPmiHd1oTXvcPdvAHicJDA9qBUSujgAhUMJyUMb+SA@mail.gmail.com
Backpatch-through: 12
Certain background workers initiate parallel queries while
debug_query_string==NULL, at which point they attempted strlen(NULL) and
died to SIGSEGV. Older debug_query_string observers allow NULL, so do
likewise in these newer ones. Back-patch to v11, where commit
7de4a1bcc5 introduced the first of these.
Discussion: https://postgr.es/m/20201014022636.GA1962668@rfd.leadboat.com
Because of this, if you tried to create an operator family with the new
sortsupport function, you got an error:
ERROR: support function number 11 is invalid for access method gist
We missed this in commit 16fa9b2b30 that added the sortsupport function,
because it only added sortsupport to a built-in operator family.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/3520A18A-5C38-4697-A2E3-F3BDE3496CD5%40yandex-team.ru
The timetz test cases I added in commit a9632830b were unintentionally
sensitive to whether or not DST is active in the PST8PDT time zone.
Thus, they'll start failing this coming weekend, as reported by
Bernhard M. Wiedemann in bug #16689. Fortunately, DST-awareness is
not significant to the purpose of these test cases, so we can just
force them all to PDT (DST hours) to preserve stability of the
results.
Back-patch to v10, as the prior patch was.
Discussion: https://postgr.es/m/16689-57701daa23b377bf@postgresql.org
On the same reasoning as in commit 36b931214, forbid using custom
oid_symbol macros in pg_type as well as pg_proc, so that we always
rely on the predictable macro names generated by genbki.pl.
We do continue to grant grandfather status to the names CASHOID and
LSNOID, although those are now considered deprecated aliases for the
preferred names MONEYOID and PG_LSNOID. This is because there's
likely to be client-side code using the old names, and this bout of
neatnik-ism doesn't quite seem worth breaking client code.
There might be a case for grandfathering EVTTRIGGEROID, too, since
externally-maintained PLs may reference that symbol. But renaming
such references to EVENT_TRIGGEROID doesn't seem like a particularly
heavy lift --- we make far more significant backend API changes in
every major release. For now I didn't add that, but we could
reconsider if there's pushback.
The other names changed here seem pretty unlikely to have any outside
uses. Again, we could add alias macros if there are complaints, but
for now I didn't.
As before, no need for a catversion bump.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
When ComputeXidHorizons() was called before MyDatabaseOid is set,
e.g. because a dead row in a shared relation is encountered during
InitPostgres(), the horizon for normal tables was computed too
aggressively, ignoring all backends connected to a database.
During subsequent pruning in a data table the too aggressive horizon
could end up still being used, possibly leading to still needed tuples
being removed. Not good.
This is a bug in dc7420c2c9, which the test added in 94bc27b576 made
visible, if run with force_parallel_mode set to regress. In that case
the bug is reliably triggered, because "pruning_query" is run in a
parallel worker and the start of that parallel worker is likely to
encounter a dead row in pg_database.
The fix is trivial: Compute a more pessimistic data table horizon if
MyDatabaseId is not yet known.
Author: Andres Freund
Discussion: https://postgr.es/m/20201029040030.p4osrmaywhqaesd4@alap3.anarazel.de
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
This fixes a bug in the edge case where, for a temp table, heap_page_prune()
can end up with a different horizon than heap_vacuum_rel(). Which can trigger
errors like "ERROR: cannot freeze committed xmax ...".
The bug was introduced due to interaction of a7212be8b9 "Set cutoff xmin more
aggressively when vacuuming a temporary table." with dc7420c2c9 "snapshot
scalability: Don't compute global horizons while building snapshots.".
The problem is caused by lazy_scan_heap() assuming that the only reason its
HeapTupleSatisfiesVacuum() call would return HEAPTUPLE_DEAD is if the tuple is
a HOT tuple, or if the tuple's inserting transaction has aborted since the
heap_page_prune() call. But after a7212be8b9 that was also possible in other
cases for temp tables, because heap_page_prune() uses a different visibility
test after dc7420c2c9.
The fix is fairly simple: Move the special case logic for temp tables from
vacuum_set_xid_limits() to the infrastructure introduced in dc7420c2c9. That
ensures that the horizon used for pruning is at least as aggressive as the one
used by lazy_scan_heap(). The concrete horizon used for temp tables is
slightly different than the logic in dc7420c2c9, but should always be as
aggressive as before (see comments).
A significant benefit to centralizing the logic procarray.c is that now the
more aggressive horizons for temp tables does not just apply to VACUUM but
also to e.g. HOT pruning and the nbtree killtuples logic.
Because isTopLevel is not needed by vacuum_set_xid_limits() anymore, I
undid the the related changes from a7212be8b9.
This commit also adds an isolation test ensuring that the more aggressive
vacuuming and pruning of temp tables keeps working.
Debugged-By: Amit Kapila <amit.kapila16@gmail.com>
Debugged-By: Tom Lane <tgl@sss.pgh.pa.us>
Debugged-By: Ashutosh Sharma <ashu.coek88@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201014203103.72oke6hqywcyhx7s@alap3.anarazel.de
Discussion: https://postgr.es/m/20201015083735.derdzysdtqdvxshp@alap3.anarazel.de
In almost all other places, we use plain "r" or "w" mode in popen()
calls (the exceptions being for COPY data). This one has been
overlooked (possibly because it's buried in a ".l" flex file?),
but it's using PG_BINARY_R.
Kensuke Okamura complained in bug #16688 that we fail to strip \r
when stripping the trailing newline from a backtick result string.
That's true enough, but we'd also fail to convert embedded \r\n
cleanly, which also seems undesirable. Fixing the popen() mode
seems like the best way to deal with this.
It's been like this for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/16688-c649c7b69cd7e6f8@postgresql.org
It's unsafe to do this at parse time because addition of generated
columns to a table would not invalidate stored rules containing
UPDATEs on the table ... but there might now be dependent generated
columns that were not there when the rule was made. This also fixes
an oversight that rewriteTargetView failed to update extraUpdatedCols
when transforming an UPDATE on an updatable view. (Since the new
calculation is downstream of that, rewriteTargetView doesn't actually
need to do anything; but before, there was a demonstrable bug there.)
In v13 and HEAD, this leads to easily-visible bugs because (since
commit c6679e4fc) we won't recalculate generated columns that aren't
listed in extraUpdatedCols. In v12 this bitmap is mostly just used
for trigger-firing decisions, so you'd only notice a problem if a
trigger cared whether a generated column had been updated.
I'd complained about this back in May, but then forgot about it
until bug #16671 from Michael Paul Killian revived the issue.
Back-patch to v12 where this field was introduced. If existing
stored rules contain any extraUpdatedCols values, they'll be
ignored because the rewriter will overwrite them, so the bug will
be fixed even for existing rules. (But note that if someone were
to update to 13.1 or 12.5, store some rules with UPDATEs on tables
having generated columns, and then downgrade to a prior minor version,
they might observe issues similar to what this patch fixes. That
seems unlikely enough to not be worth going to a lot of effort to fix.)
Discussion: https://postgr.es/m/10206.1588964727@sss.pgh.pa.us
Discussion: https://postgr.es/m/16671-2fa55851859fb166@postgresql.org
We have a perfectly good convention for OID macros for built-in functions
already, so making custom symbols is just introducing unnecessary
deviation from the convention. Remove the one case that had snuck in,
and add an error check in genbki.pl to discourage future instances.
Although this touches pg_proc.dat, there's no need for a catversion
bump since the actual catalog data isn't changed.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
get_foreign_key_join_selectivity() looks for join clauses that equate
the two sides of the FK constraint. However, if we have a query like
"WHERE fktab.a = pktab.a and fktab.a = 1", it won't find any such join
clause, because equivclass.c replaces the given clauses with "fktab.a
= 1 and pktab.a = 1", which can be enforced at the scan level, leaving
nothing to be done for column "a" at the join level.
We can fix that expectation without much trouble, but then a new problem
arises: applying the foreign-key-based selectivity rule produces a
rowcount underestimate, because we're effectively double-counting the
selectivity of the "fktab.a = 1" clause. So we have to cancel that
selectivity out of the estimate.
To fix, refactor process_implied_equality() so that it can pass back the
new RestrictInfo to its callers in equivclass.c, allowing the generated
"fktab.a = 1" clause to be saved in the EquivalenceClass's ec_derives
list. Then it's not much trouble to dig out the relevant RestrictInfo
when we need to adjust an FK selectivity estimate. (While at it, we
can also remove the expensive use of initialize_mergeclause_eclasses()
to set up the new RestrictInfo's left_ec and right_ec pointers.
The equivclass.c code can set those basically for free.)
This seems like clearly a bug fix, but I'm hesitant to back-patch it,
first because there's some API/ABI risk for extensions and second because
we're usually loath to destabilize plan choices in stable branches.
Per report from Sigrid Ehrenreich.
Discussion: https://postgr.es/m/1019549.1603770457@sss.pgh.pa.us
Discussion: https://postgr.es/m/AM6PR02MB5287A0ADD936C1FA80973E72AB190@AM6PR02MB5287.eurprd02.prod.outlook.com
This makes use of CheckBuffer() introduced in c780a7a, adding a SQL
wrapper able to do checks for all the pages of a relation. By default,
all the fork types of a relation are checked, and it is possible to
check only a given relation fork. Note that if the relation given in
input has no physical storage or is temporary, then no errors are
generated, allowing full-database checks when coupled with a simple scan
of pg_class for example. This is not limited to clusters with data
checksums enabled, as clusters without data checksums can still apply
checks on pages using the page headers or for the case of a page full of
zeros.
This function returns a set of tuples consisting of:
- The physical file where a broken page has been detected (without the
segment number as that can be AM-dependent, which can be guessed from
the block number for heap). A relative path from PGPATH is used.
- The block number of the broken page.
By default, only superusers have an access to this function but
execution rights can be granted to other users.
The feature introduced here is still minimal, and more improvements
could be done, like:
- Addition of a start and end block number to run checks on a range
of blocks, which would apply only if one fork type is checked.
- Addition of some progress reporting.
- Throttling, with configuration parameters in function input or
potentially some cost-based GUCs.
Regression tests are added for positive cases in the main regression
test suite, and TAP tests are added for cases involving the emulation of
page corruptions.
Bump catalog version.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada, Justin Pryzby
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
CheckBuffer() is designed to be a concurrent-safe function able to run
sanity checks on a relation page without loading it into the shared
buffers. The operation is done using a lock on the partition involved
in the shared buffer mapping hashtable and an I/O lock for the buffer
itself, preventing the risk of false positives due to any concurrent
activity.
The primary use of this function is the detection of on-disk corruptions
for relation pages. If a page is found in shared buffers, the on-disk
page is checked if not dirty (a follow-up checkpoint would flush a valid
version of the page if dirty anyway), as it could be possible that a
page was present for a long time in shared buffers with its on-disk
version corrupted. Such a scenario could lead to a corrupted cluster if
a host is plugged off for example. If the page is not found in shared
buffers, its on-disk state is checked. PageIsVerifiedExtended() is used
to apply the same sanity checks as when a page gets loaded into shared
buffers.
This function will be used by an upcoming patch able to check the state
of on-disk relation pages using a SQL function.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
Now that LOCK TABLE can take any relation type, acquire lock on all
relations that are to be dumped. This prevents schema changes or
deadlock errors that could cause a dump to fail after expending much
effort. The server is tested to have the capability and the feature
disabled if it doesn't, so that a patched pg_dump doesn't fail when
connecting to an unpatched server.
Backpatch to 9.5.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Wells Oliver <wells.oliver@gmail.com>
Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
This accompanies select_common_type() and select_common_collation().
Typmods were previously combined using hand-coded logic in several
places. The logic in select_common_typmod() isn't very exciting, but
it makes the code more compact and readable in a few locations, and in
the future we can perhaps do more complicated things if desired.
As a small enhancement, the type unification of the direct and
aggregate arguments of hypothetical-set aggregates now unifies the
typmod as well using this new function, instead of just dropping it.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/97df3af9-8b5e-fb7f-a029-3eb7e80d7af9@2ndquadrant.com
The restriction that only tables and views can be locked by LOCK TABLE
is quite arbitrary, since the underlying mechanism can lock any relation
type. Drop the restriction so that programs such as pg_dump can lock
all relations they're interested in, preventing schema changes that
could cause a dump to fail after expending much effort.
Backpatch to 9.5.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Wells Oliver <wells.oliver@gmail.com>
Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
Previously, ExecInitModifyTable relied on ExecInitJunkFilter,
and thence ExecCleanTypeFromTL, to build the target descriptor from
the query tlist. While we just checked (in ExecCheckPlanOutput)
that the tlist produces compatible output, this is not a great
substitute for the relation's actual tuple descriptor that's
available from the relcache. For one thing, dropped columns will
not be correctly marked attisdropped; it's a bit surprising that
we've gotten away with that this long. But the real reason for
being concerned with this is that using the table's descriptor means
that the slot will have correct attrmissing data, allowing us to
revert the klugy fix of commit ba9f18abd. (This commit undoes
that one's changes in trigger.c, but keeps the new test case.)
Thus we can solve the bogus-trigger-tuple problem with fewer cycles
rather than more.
No back-patch, since this doesn't fix any additional bug, and it
seems somewhat more likely to have unforeseen side effects than
ba9f18abd's narrow fix.
Discussion: https://postgr.es/m/16644-5da7ef98a7ac4545@postgresql.org
This is useful for checks of relation pages without having to load the
pages into the shared buffers, and two cases can make use of that: page
verification in base backups and the online, lock-safe, flavor.
Compatibility is kept with past versions using a macro that calls the
new extended routine with the set of options compatible with the
original version.
Extracted from a larger patch by the same author.
Author: Anastasia Lubennikova
Reviewed-by: Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/608f3476-0598-2514-2c03-e05c7d2b0cbd@postgrespro.ru
If the old row has any "missing" attributes that are supposed to
be retrieved from an associated tuple descriptor, the wrong things
happened because the trigger result is shoved directly into an
executor slot that lacks the missing-attribute data. Notably,
CHECK-constraint verification would incorrectly see those columns
as NULL, and so would RETURNING-list evaluation.
Band-aid around this by forcibly expanding the tuple before passing
it to the trigger function. (IMO it was a fundamental misdesign to
put the missing-attribute data into tuple constraints, which so
much of the system considers to be optional. But we're probably
stuck with that now, and will have to continue to apply band-aids
as we find other places with similar issues.)
Back-patch to v12. v11 would also have the issue, except that
commit 920311ab1 already applied a similar band-aid. That forced
expansion in more cases than seem really necessary, though, so
this isn't a directly equivalent fix.
Amit Langote, with some cosmetic changes by me
Discussion: https://postgr.es/m/16644-5da7ef98a7ac4545@postgresql.org
We must not set the "done" flag until after we've executed the
initialization function. Otherwise, other threads can fall through
the initial unlocked test before initialization is really complete.
This has been seen to cause rare failures of ecpg's thread/descriptor
test, and it could presumably cause other sorts of misbehavior in
threaded ECPG-using applications, since ecpglib relies on
pthread_once() in several places.
Diagnosis and patch by me, based on investigation by Alexander Lakhin.
Back-patch to all supported branches (the bug dates to 2007).
Discussion: https://postgr.es/m/16685-d6cd241872c101d3@postgresql.org
genhtml has been generating the following warning with this new code:
WARNING: function data mismatch at /path/src/common/unicode_norm.c:102
HTML coverage reports care about the uniqueness of functions defined in
source files, ignoring any assumptions around CFLAGS. 783f0cc
introduced a duplicated definition of get_code_entry(), leading to a
warning and potentially some incorrect data generated in the reports.
This refactors the code so as the code has only one function
declaration, fixing the warning.
Oversight in 783f0cc.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/207789.1603469272@sss.pgh.pa.us
Instead of immediately PQfinish'ing a dead connection, save it aside
so that we can still extract its parameters for \connect attempts.
(This works because PQconninfo doesn't care whether the PGconn is in
CONNECTION_BAD state.) This allows developers to reconnect with
just \c after a database crash and restart.
It's tempting to use the same approach instead of closing the old
connection after a failed non-interactive \connect command. However,
that would not be very safe: consider a script containing
\c db1 user1 live_server
\c db2 user2 dead_server
\c db3
The script would be expecting to connect to db3 at dead_server, but
if we re-use parameters from the first connection then it might
successfully connect to db3 at live_server. This'd defeat the goal
of not letting a script accidentally execute commands against the
wrong database.
Discussion: https://postgr.es/m/38464.1603394584@sss.pgh.pa.us
The ExplainCloseGroup arguments for incremental sort usage data
didn't match the corresponding ExplainOpenGroup. This only matters
for XML-format output, which is probably why we'd not noticed.
Daniel Gustafsson, per bug #16683 from Frits Jalvingh
Discussion: https://postgr.es/m/16683-8005033324ad34e9@postgresql.org
This replaces the existing binary search with two perfect hash functions
for the composition and the decomposition in the backend code, at the
cost of slightly-larger binaries there (35kB in libpgcommon_srv.a). Per
the measurements done, this improves the speed of the recomposition and
decomposition by up to 30~40 times for the NFC and NFKC conversions,
while all other operations get at least 40% faster. This is not as
"good" as what libicu has, but it closes the gap a lot as per the
feedback from Daniel Verite.
The decomposition table remains the same, getting used for the binary
search in the frontend code, where we care more about the size of the
libraries like libpq over performance as this gets involved only in code
paths related to the SCRAM authentication. In consequence, note that
the perfect hash function for the recomposition needs to use a new
inverse lookup array back to to the existing decomposition table.
The size of all frontend deliverables remains unchanged, even with
--enable-debug, including libpq.
Author: John Naylor
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/CAFBsxsHUuMFCt6-pU+oG-F1==CmEp8wR+O+bRouXWu6i8kXuqA@mail.gmail.com
There's no functional change at all here, but I'm curious to see
whether this change successfully shuts up Coverity's warning about
a useless strcmp(), which appeared with the previous update.
Discussion: http://mm.icann.org/pipermail/tz/2020-October/029370.html
ECPG's PREPARE ... FROM and EXECUTE IMMEDIATE can optionally take
the target query as a simple literal, rather than the more usual
string-variable reference. This was previously documented as
being a C string literal, but that's a lie in one critical respect:
you can't write a data double quote as \" in such literals. That's
because the lexer is in SQL mode at this point, so it'll parse
double-quoted strings as SQL identifiers, within which backslash
is not special, so \" ends the literal.
I looked into making this work as documented, but getting the lexer
to switch behaviors at just the right point is somewhere between
very difficult and impossible. It's not really worth the trouble,
because these cases are next to useless: if you have a fixed SQL
statement to execute or prepare, you might as well write it as
a direct EXEC SQL, saving the messiness of converting it into
a string literal and gaining the opportunity for compile-time
SQL syntax checking.
Instead, let's just document (and test) the workaround of writing
a double quote as an octal escape (\042) in such cases.
There's no code behavioral change here, so in principle this could
be back-patched, but it's such a niche case I doubt it's worth
the trouble.
Per report from 1250kv.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
If you write the literal 'abc''def' in an EXEC SQL command, that will
come out the other end as 'abc'def', triggering a syntax error in the
backend. Likewise, "abc""def" is reduced to "abc"def" which is wrong
syntax for a quoted identifier.
The cause is that the lexer thinks it should emit just one quote
mark, whereas what it really should do is keep the string as-is.
Add some docs and test cases, too.
Although this seems clearly a bug, I fear users wouldn't appreciate
changing it in minor releases. Some may well be working around it
by applying an extra doubling of affected quotes, as for example
sql/dyntest.pgc has been doing.
Per investigation of a report from 1250kv, although this isn't
exactly what he/she was on about.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
The check for whether to complain about not having an old connection
to get parameters from was seriously out of date: it had not been
rethought when we invented connstrings, nor when we invented the
-reuse-previous option. Replace it with a check that throws an
error if reuse-previous is active and we lack an old connection to
reuse. While that doesn't move the goalposts very far in terms of
easing reconnection after a server crash, at least it's consistent.
If the user specifies a connstring plus additional parameters
(which is invalid per the documentation), the extra parameters were
silently ignored. That seems like it could be really confusing,
so let's throw a syntax error instead.
Teach the connstring code path to re-use the old connection's password
in the same cases as the old-style-syntax code path would, ie if we
are reusing parameters and the values of username, host/hostaddr, and
port are not being changed. Document this behavior, too, since it was
unmentioned before. Also simplify the implementation a bit, giving
rise to two new and useful properties: if there's a "password=xxx" in
the connstring, we'll use it not ignore it, and by default (i.e.,
except with --no-password) we will prompt for a password if the
re-used password or connstring password doesn't work. The previous
code just failed if the re-used password didn't work.
Given the paucity of field complaints about these issues, I don't
think that they rise to the level of back-patchable bug fixes,
and in any case they might represent undesirable behavior changes
in minor releases. So no back-patch.
Discussion: https://postgr.es/m/235210.1603321144@sss.pgh.pa.us
There is a handful of places where we called list_delete_ptr() to remove
some element from a List. In many of these places we know, or with very
little additional effort know the index of the ListCell that we need to
remove.
Here we change all of those places to instead either use one of;
list_delete_nth_cell(), foreach_delete_current() or list_delete_last().
Each of these saves from having to iterate over the list to search for the
element to remove by its pointer value.
There are some small performance gains to be had by doing this, but in the
general case, none of these lists are likely to be very large, so the
lookup was probably never that expensive anyway. However, some of the
calls are in fairly hot code paths, e.g process_equivalence(). So any
small gains there are useful.
Author: Zhijie Hou and David Rowley
Discussion: https://postgr.es/m/b3517353ec7c4f87aa560678fbb1034b@G08CNEXMBPEKD05.g08.fujitsu.local
psql's \connect claims to be able to re-use previous connection
parameters, but in fact it only re-uses the database name, user name,
host name (and possibly hostaddr, depending on version), and port.
This is problematic for assorted use cases. Notably, pg_dump[all]
emits "\connect databasename" commands which we would like to have
re-use all other parameters. If such a script is loaded in a psql run
that initially had "-d connstring" with some non-default parameters,
those other parameters would be lost, potentially causing connection
failure. (Thus, this is the same kind of bug addressed in commits
a45bc8a4f and 8e5793ab6, although the details are much different.)
To fix, redesign do_connect() so that it pulls out all properties
of the old PGconn using PQconninfo(), and then replaces individual
properties in that array. In the case where we don't wish to re-use
anything, get libpq's default settings using PQconndefaults() and
replace entries in that, so that we don't need different code paths
for the two cases.
This does result in an additional behavioral change for cases where
the original connection parameters allowed multiple hosts, say
"psql -h host1,host2", and the \connect request allows re-use of the
host setting. Because the previous coding relied on PQhost(), it
would only permit reconnection to the same host originally selected.
Although one can think of scenarios where that's a good thing, there
are others where it is not. Moreover, that behavior doesn't seem to
meet the principle of least surprise, nor was it documented; nor is
it even clear it was intended, since that coding long pre-dates the
addition of multi-host support to libpq. Hence, this patch is content
to drop it and re-use the host list as given.
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
Theoretically one could go into src/test/thread and build/run this
program there. In practice, that hasn't worked since 96bf88d52,
and probably much longer on some platforms (likely including just
the sort of hoary leftovers where this test might be of interest).
While it wouldn't be too hard to repair the breakage, the fact that
nobody has noticed for two years shows that there is zero usefulness
in maintaining this build pathway. Let's get rid of it and decree
that thread_test.c is *only* meant to be built/used in configure.
Given that decision, it makes sense to put thread_test.c under config/
and get rid of src/test/thread altogether, so that's what I did.
In passing, update src/test/README, which had been ignored by some
not-so-recent additions of subdirectories.
Discussion: https://postgr.es/m/227659.1603041612@sss.pgh.pa.us
Fujii Masao
Andres Freund
Michael Paquier
Tom Lane
Heikki Linnakangas
Peter Eisentraut
Amit Kapila
Dean Rasheed
Stephen Frost
Bruce Momjian
Alvaro Herrera
Thomas Munro
Noah Misch
David Rowley
Andrew Gierth
Magnus Hagander
Peter Geoghegan
Alexander Korotkov
Tomas Vondra
Robert Haas