> Well, no. What it says is that certain values must be escaped (but
> doesn't say which ones). Then it says there are alternate escape
> sequences for some values, which it lists.
>
> It doesn't say "The following table contains the characters which must
> be escaped:", which would be much clearer (and actually useful).
Attached documentation patch updates the wording for bytea input
escaping, per complaint by Stephen Norris above.
Joe Conway
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
and 100 respectively, if the platform will allow it. initdb selects
values that are not too large to allow the postmaster to start, and
places these values in the installed postgresql.conf file. This allows
us to continue to start up out-of-the-box on platforms with small SHMMAX,
while having somewhat-realistic default settings on platforms with
reasonable SHMMAX. Per recent pghackers discussion.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
client-side AUTOCOMMIT mode now: '\set AUTOCOMMIT off' supports
SQL-spec commit behavior. Get rid of LO_TRANSACTION hack --- the
LO operations just work now, using libpq's ability to track the
transaction status. Add a VERBOSE variable to control verboseness
of error message display, and add a %T prompt-string code to show
current transaction-block status. Superuser state display in the
prompt string correctly follows SET SESSION AUTHORIZATION commands.
Control-C works to get out of COPY IN state.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
identifier, while some areas do not.
The attached converts be below to "name":
conversion_name
index_name
The below have an existing, initdb supplied, entity named "name". As
such, it could be confusing for the reader to see that identifier used
in the example.
domainname
typename
Rod Taylor
with advocacy and 'portal' websites.
Link to createdb / dropdb from the tutorial page about create / dropdb.
A pair of notes were asking about more info...
Rod Taylor
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
out of mind, because it'd been commented out years ago). Try to bring the
remains up to a reasonable level of currency, and give it all approximately
the same high level of abstraction.
> * Allow current datestyle to restrict dates; prevent month/day swapping
> from making invalid dates valid
> * Prevent month/day swapping of ISO dates to make invalid dates valid
character in identifiers. The first change eliminates the current need
to put spaces around parameter references, as in "x<=$2". The second
change improves compatibility with Oracle and some other RDBMSes. This
was discussed and agreed to back in January, but did not get done.
not all SQL identifiers taken from command line arguments. We decided
years ago that that was a bad idea: identifiers taken from the command
line should be treated as literally correct. Remove the inconsistent
code that has crept in recently. Also fix pg_dump so that the combination
of --schema and --table does what you'd expect, namely dump exactly one
table from exactly one schema. Per gripe from Deepak Bhole of Red Hat.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
> * Allow a single index to index multiple tables (for inheritance and subtables)
408a410
> * Improve the planner to use CHECK constraints to prune the plan (for subtables)
418a421
> * Allow partitioning of table into multiple subtables
419a423
> T
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
< * Update clients to use data types, typmod, schema.table.column names of
< result sets using new query protocol
453a452,453
> o Update clients to use data types, typmod, schema.table.column names of
> result sets using new query protocol
< * Allow clients to get data types, typmod, schema.table.column names from
< result sets, either via the backend protocol or a new QUERYINFO command
to:
> * Update clients to use data types, typmod, schema.table.column names of
> result sets using new query protocol
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
implementation limits, do not issue an ERROR; instead issue a NOTICE and use
the max supported value. Per pgsql-general discussion of 28-Apr, this is
needed to allow easy porting from pre-7.3 releases where the limits were
higher.
Unrelated change in same area: accept GLOBAL TEMP/TEMPORARY as a synonym
for TEMPORARY, as per pgsql-hackers discussion of 15-Apr. We previously
rejected it, but that was based on a misreading of the spec --- SQL92's
GLOBAL temp tables are really closer to what we have than their LOCAL ones.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
some message types. In particular add text/binary flag to StartCopyIn
and StartCopyOut, so that client library can know what is expected or
forthcoming.
Bruce Momjian
Tom Lane
Peter Eisentraut
Barry Lind
Michael Meskes