The "vertexes" spelling is also valid, but we consistently use
"vertices" elsewhere.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Shubham Khanna
Discussion: https://postgr.es/m/87le9fmi01.fsf@wibble.ilmari.org
CheckPWChallengeAuth() would return STATUS_ERROR if the user does not
exist or has no password assigned, even if the client disconnected
without responding to the password challenge (as libpq often will,
for example). We should return STATUS_EOF in that case, and the
lower-level functions do, but this code level got it wrong since the
refactoring done in 7ac955b34. This breaks the intent of not logging
anything for EOF cases (cf. comments in auth_failed()) and might
also confuse users of ClientAuthentication_hook.
Per report from Liu Lang. Back-patch to all supported versions.
Discussion: https://postgr.es/m/b725238c-539d-cb09-2bff-b5e6cb2c069c@esgyn.cn
Second attempt at 283a95da92. Since we can't reorder the enum values
of JsonPathItemType, instead reorder the switch cases where they are
used to generally follow the order of the enum values, for better
maintainability.
This reverts commit 283a95da92.
The reordering of JsonPathItemType affects the binary on-disk
compatibility of the jsonpath type, so we must not change it. Revert
for now and consider.
Swap the arguments to TimestampDifferenceMilliseconds so that we get
a positive answer instead of zero.
Then use the result of that computation instead of ignoring it.
Per reports from Alexander Lakhin.
Discussion: http://postgr.es/m/8b686764-7ac1-74c3-70f9-b64685a2535f@gmail.com
New TAP tests added by commits 9a17be1e and 4710b67d missed to convert
warnings to FATAL. This commit fixes that.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Some of the TAP tests have been historically setting the environment
variable PGDATABASE to 'postgres', which is not needed because
PostgreSQL::Test::Cluster already sets it when initialized. This commit
removes these explicit setups.
Note that the dependency of cluster -a with PGDATABASE (from
1caef31d9e) is still documented.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXLAz5dW3ZP+Fec8g6jQMMmDyCVT+qdbye2h7QJJmhsdw@mail.gmail.com
Avoid leaving a dangling pointer in the unlikely event that
nsphash_create fails. Improve comments, and fix formatting by
adding typedefs.list entries.
Discussion: https://postgr.es/m/3972900.1704145107@sss.pgh.pa.us
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
The brinbuildCallbackParallel callback used by parallel BRIN builds did
not consider that the parallel table scans may be synchronized, starting
from an arbitrary block and then wrap around.
If this happened and the scan actually did wrap around, tuples from the
beginning of the table were added to the last range produced by the same
worker. The index would be missing range at the beginning of the table,
while the last range would be too wide. This would not produce incorrect
query results, but it'd be less efficient.
Fixed by checking for both past and future ranges in the callback. The
worker may produce multiple summaries for the same page range, but the
leader will merge them as if the summaries came from different workers.
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
Commit b437571714 added support for parallel builds for BRIN indexes,
using code similar to BTREE parallel builds, and also a new tuplesort
variant. This commit simplifies the new code in two ways:
* The "spool" grouping tuplesort and the heap/index is not necessary.
The heap/index are available as separate arguments, causing confusion.
So remove the spool, and use the tuplesort directly.
* The new tuplesort variant does not need the heap/index, as it sorts
simply by the range block number, without accessing the tuple data.
So simplify that too.
Initial report and patch by Ranier Vilela, further cleanup by me.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqD7f2i4iyEaAz-5o-bf6zXVX-AkNUBm-YjUXEemaEh6A%40mail.gmail.com
Commit 16671ba6e7 moved the code that sends "sorry, too many clients
already" and other such messages, but it had the effect that we would
send that error even if the the startup packet processing failed, e.g.
because the client sent an invalid startup packet. That was not
intentional.
Spotted while reading the code again.
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
If the underlying table isn't being dumped, it's useless to dump
an extended statistics object; it'll just cause errors at restore.
We have always applied similar policies to, say, indexes.
(When and if we get cross-table stats objects, it might be profitable
to think a little harder about what to do with them. But for now
there seems no point in considering a stats object as anything but
an appendage of its table.)
Rian McGuire and Tom Lane, per report from Rian McGuire.
Back-patch to supported branches.
Discussion: https://postgr.es/m/7075d3aa-3f05-44a5-b68f-47dc6a8a0550@buildkite.com
The documentation has been missing one value in the list of catalog OIDs
that can be given to the validator function of a FDW, as of
AttributeRelationId, when changing the attribute options of a foreign
table.
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=i16t2yJU_Pq2Z+hnNGWFhagp_bJmzxHZu3ZkOjZm-+rQ@mail.gmail.com
Backpatch-through: 12
This function was originally coded with a handmade expansion
of the array subscripts. We can do it a little faster and far
more legibly today, by using unnest() WITH ORDINALITY.
While at it, let's apply the rowcount estimation support that exists
for the underlying unnest() function: reduce the default ROWS estimate
to 100 and attach array_unnest_support. I'm not sure that
array_unnest_support can do anything useful today with the call sites
that exist in information_schema, but it can't hurt, and the existing
default rowcount of 1000 is surely much too high for any of these
cases.
The psql.sql regression script is using _pg_expandarray() as a
test case for \sf+. While we could keep doing so, the new one-line
function body makes a poor test case for \sf+ row-numbering, so
switch it to print another information_schema function.
Discussion: https://postgr.es/m/1424303.1703355485@sss.pgh.pa.us
add_file_to_manifest declared its mtime argument as pg_time_t,
apparently on the principle that copy-and-paste from the backend
is fine. However, the callers are passing struct stat's st_mtime
field which is plain time_t, and add_file_to_manifest itself is
passing the value to gmtime(3) which expects plain time_t,
so the whole thing would not work at all on any platform where
those types are different. Fortunately we can just switch this
variable to time_t.
Per warnings from assorted buildfarm members.
The code was passing a scalar argument to node->restart(), but it was
expecting a hash, which causes a warning from Perl ("Odd number of
elements in hash assignment").
But the node->restart() function doesn't take a mode argument anyway.
This was probably copied from an incorrect comment (see commit
750c59d7ec). The default restart mode is already "fast", so the test
should still be semantically correct without explicitly specifying the
mode.
Discussion: https://www.postgresql.org/message-id/e3f4bf1b-63d3-408a-b07e-d35a0fdf1b98@eisentraut.org
Recently-introduced code in reconstruct.c was using "unsigned"
to store the result of read(), pg_pread(), or write(). This is
completely bogus: it breaks subsequent tests for the result being
negative, as we're being reminded of by a chorus of buildfarm
warnings. Switch to "int" as was doubtless intended. (There are
several other uses of "unsigned" in this file that also look poorly
chosen to me, but for now I'm just trying to clean up the buildfarm.)
A larger problem is that "int" is not necessarily wide enough to hold
the result: per POSIX, all these functions return ssize_t. In places
where the requested read or write length clearly fits in int, that's
academic. It may be academic anyway as long as we constrain
individual data files to 1GB, since even a readv or writev-like
operation would then not be responsible for transferring more than
1GB. Nonetheless it seems like trouble waiting to happen, so I made
a pass over readv and writev calls and fixed the result variables
where that seemed appropriate. We might want to think about changing
some of the fd.c functions to return ssize_t too, for future-proofing;
but I didn't tackle that here.
Discussion: https://postgr.es/m/1672202.1703441340@sss.pgh.pa.us
I don't think there's a real problem here, because if we reach
the loop over 'tles' then we will either find at least one
TimeLineHistoryEntry such that oldest_segno != 0, in which case
unsummarized_lsn will be initialized, or else unsummarized_tli
will remain 0 and an error will occur before unsummarized_lsn
is used for anything. But some compilers are complainining, as
reported on list by Nathan Bossart and off-list by Andrew Dunstan.
Discussion: http://postgr.es/m/20231223215147.GA69623@nathanxps13
e0b1ee17dc introduced optimization for matching B-tree scan keys required for
the directional scan. However, it incorrectly assumed that all keys required
for opposite direction scan are satisfied by _bt_first(). It has been
illustrated that with multiple scan keys over the same column, a lesser one
(according to the scan direction) could win leaving the other one unsatisfied.
Instead of relying on _bt_first() this commit introduces code that memorizes
whether there was at least one match on the page. If that's true we know that
keys required for opposite-direction scan are satisfied as soon as
corresponding values are not NULLs.
Also, this commit simplifies the description for the optimization of keys
required for the current direction scan. Now the flag used for this is named
continuescanPrechecked and means exactly that *continuescan flag is known
to be true for the last item on the page.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn0LeLcb1PdBnK0xisz8NpHkxRrMr3NWJ%2BKOK-WZ%2BQtTQ%40mail.gmail.com
Reviewed-by: Pavel Borisov
It's not necessary to keep the firstPage flag as a field of BTScanOpaqueData.
This commit makes it an argument of the _bt_readpage() function. We can easily
distinguish first-time and repeated calls (within the scan) of this function.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzk4SOsw%2BtHuTFiz8U9Jqj-R77rYPkhWKODCBb1mdHACXA%40mail.gmail.com
Reviewed-by: Pavel Borisov
Bruce Momjian
Michael Paquier
Tom Lane
Peter Eisentraut
Robert Haas
Alexander Korotkov
Amit Kapila
Tomas Vondra
Heikki Linnakangas
Jeff Davis