protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
an already installed iODBC or unixODBC driver manager. In particular,
use the include files provided by the driver manager over our own,
and use the odbcinst library of the driver manager rather than gpps.c.
Migrate portability sections common to several files into psqlodbc.h.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
Client headers are no longer in a subdirectory, since they have been made
namespace-clean.
Internal libpq headers are in a private subdirectory.
Server headers are in a private subdirectory. pg_config has a new option
to point there.
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
the -l options. (This was not the case when using the OpenSSL or Kerberos
options.) Also make sure that shared library links get to see all the -L
options. Get Kerberos 5 support to compile on Redhat 7.0. Add OpenSSL and
-lsocket (if used/found) to libpq link.
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
anywhere else that Makefile.shlib needs to modify CFLAGS to produce
valid code for a shared library. I'm not real clear on *why* the use
of override causes make to ignore the later attempt to assign
CFLAGS +=
but it indubitably does --- at least on gmake 3.79.1. gmake bug?
Bruce Momjian
Peter Eisentraut
Tom Lane
Tatsuo Ishii