in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
strength of database passwords, and create a sample implementation of
such a hook as a new contrib module "passwordcheck".
Laurenz Albe, reviewed by Takahiro Itagaki
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
default be "throw error on conflict", as per discussions. The GUC variable
is plpgsql.variable_conflict, with values "error", "use_variable",
"use_column". The behavior can also be specified per-function by inserting
one of
#variable_conflict error
#variable_conflict use_variable
#variable_conflict use_column
at the start of the function body.
The 8.5 release notes will need to mention using "use_variable" to retain
backward-compatible behavior, although we should encourage people to migrate
to the much less mistake-prone "error" setting.
Update the plpgsql documentation to match this and other recent changes.
it works just as well to have them be ordinary identifiers, and this gets rid
of a number of ugly special cases. Plus we aren't interfering with non-rule
usage of these names.
catversion bump because the names change internally in stored rules.
behavior, and is so little used that no one has been interested in fixing it.
To ensure that possible uses are covered, remove the ALIAS declaration's
arbitrary restriction that only $n identifiers can be aliased.
(We could alternatively make RENAME act just like ALIAS, but per discussion
having two different ways to do the same thing is probably more confusing than
helpful.)
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
ASCII-art style of table output to be upgraded to use Unicode box drawing
characters if desired. By default, psql will use the Unicode characters
whenever client_encoding is UTF8.
The patch forces linestyle=ascii in pg_regress usage, ensuring we don't
break the regression tests in Unicode locales.
Roger Leigh
* Stop escaping ? and {. As of SQL:2008, SIMILAR TO is defined to have
POSIX-compatible interpretation of ? as well as {m,n} and related constructs,
so we should allow these things through to our regex engine.
* Escape ^ and $. It appears that our regex engine will treat ^^ at the
beginning of the string the same as ^, and similarly for $$ at the end of
the string, which meant that SIMILAR TO was effectively ignoring ^ at the
start of the pattern and $ at the end. Since these are not supposed to be
metacharacters, this is a bug.
The second part of this is arguably a back-patchable bug fix, but I'm
hesitant to do that because it might break applications that are expecting
something like "col SIMILAR TO '^foo$'" to work like a POSIX pattern.
Seems safer to only change it at a major version boundary.
Per discussion of an example from Doug Gorley.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
Most things should be cleaned by "make clean", except the parts that are
shipped in the tarball. These rules had gotten a bit out of whack after
the various restructurings of the documentation build rules.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
in CREATE OR REPLACE FUNCTION. The original code would update pg_shdepend
as if a new function was being created, even if it wasn't, with two bad
consequences: pg_shdepend might record the wrong owner for the function,
and any dependencies for roles mentioned in the function's ACL would be lost.
The fix is very easy: just don't touch pg_shdepend at all when doing a
function replacement.
Also update the CREATE FUNCTION reference page, which never explained
exactly what changes and doesn't change in a function replacement.
In passing, fix the CREATE VIEW reference page similarly; there's no
code bug there, but the docs didn't say what happens.
Remove the 64K limit on the lengths of keys and values within an hstore.
(This changes the on-disk format, but the old format can still be read.)
Add support for btree/hash opclasses for hstore --- this is not so much
for actual indexing purposes as to allow use of GROUP BY, DISTINCT, etc.
Add various other new functions and operators.
Andrew Gierth
hand-assigned rowtype OIDs, even when they are not "bootstrapped" catalogs
that have handmade type rows in pg_type.h. Give pg_database such an OID.
Restore the availability of C macros for the rowtype OIDs of the bootstrapped
catalogs. (These macros are now in the individual catalogs' .h files,
though, not in pg_type.h.)
This commit doesn't do anything especially useful by itself, but it's
necessary infrastructure for reverting some ill-considered changes in
relcache.c.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
This is intentionally similar to the recently revised syntax for EXPLAIN
options, ie, (name value, ...). The old syntax is still supported for
backwards compatibility, but we intend that any options added in future
will be provided only in the new syntax.
Robert Haas, Emmanuel Cecchet
Instead of requiring translators to translate the entire SQL command
synopses, change create_help.pl to only require them to translate the
placeholders, and paste those into the synopsis using a printf mechanism.
Make some small updates to the markup to make it easier to parse.
Note: This causes msgmerge of gettext 0.17 to segfault. You will need
the patch from https://savannah.gnu.org/bugs/?27474 to make it work.
msgmerge usually only runs on babel.postgresql.org, however.
use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
to unload and re-load the library.
The difficulty with unloading a library is that we haven't defined safe
protocols for doing so. In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading. And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.
While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much. Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.
Back-patch to 8.2; before that, LOAD was superuser-only anyway.
Security: unprivileged users could crash backend. CVE not assigned yet
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
so that their elements are always taken as simple expressions over the
query's input columns. It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers. However, that was not such a
great idea, for two reasons:
1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself. (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)
2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".
Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
It turns out that Python 2.2 is the oldest version that PL/Python compiles
with, apparently related to the introduction of iterators. Might as well
document this.
Bruce Momjian
Peter Eisentraut
Tom Lane
Alvaro Herrera
Andrew Dunstan
Michael Meskes
Teodor Sigaev