SQL commands are generally marked up as <command>, except when a link
to a reference page is used using <xref>. But the latter doesn't
create monospace markup, so this looks strange especially when a
paragraph contains a mix of links and non-links.
We considered putting <command> in the <refentrytitle> on the target
side, but that creates some formatting side effects elsewhere.
Generally, it seems safer to solve this on the link source side.
We can't put the <xref> inside the <command>; the DTD doesn't allow
this. DocBook 5 would allow the <command> to have the linkend
attribute itself, but we are not there yet.
So to solve this for now, convert the <xref>s to <link> plus
<command>. This gives the correct look and also gives some more
flexibility what we can put into the link text (e.g., subcommands or
other clauses). In the future, these could then be converted to
DocBook 5 style.
I haven't converted absolutely all xrefs to SQL command reference
pages, only those where we care about the appearance of the link text
or where it was otherwise appropriate to make the appearance match a
bit better. Also in some cases, the links where repetitive, so in
those cases the links where just removed and replaced by a plain
<command>. In cases where we just want the link and don't
specifically care about the generated link text (typically phrased
"for further information see <xref ...>") the xref is kept.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/87o8pco34z.fsf@wibble.ilmari.org
Rename/repurpose pg_proc.protransform as "prosupport". The idea is
still that it names an internal function that provides knowledge to
the planner about the behavior of the function it's attached to;
but redesign the API specification so that it's not limited to doing
just one thing, but can support an extensible set of requests.
The original purpose of simplifying a function call is handled by
the first request type to be invented, SupportRequestSimplify.
Adjust all the existing transform functions to handle this API,
and rename them fron "xxx_transform" to "xxx_support" to reflect
the potential generalization of what they do. (Since we never
previously provided any way for extensions to add transform functions,
this change doesn't create an API break for them.)
Also add DDL and pg_dump support for attaching a support function to a
user-defined function. Unfortunately, DDL access has to be restricted
to superusers, at least for now; but seeing that support functions
will pretty much have to be written in C, that limitation is just
theoretical. (This support is untested in this patch, but a follow-on
patch will add cases that exercise it.)
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Expand section 5.6 "Privileges" to include the full definition of
each privilege type, and an explanation of aclitem privilege displays,
along with some helpful summary tables. Most of this material came
out of the GRANT reference page, although some of it is new.
Adjust a bunch of links that were pointing to GRANT to point to 5.6.
Fabien Coelho and Tom Lane, reviewed by Bradley DeJong
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807311735200.20743@lancre
Commit 5770172cb0 documented secure schema
usage, and that advice suffices for using unqualified names securely.
Document, in typeconv-func primarily, the additional issues that arise
with qualified names. Back-patch to 9.3 (all supported versions).
Reviewed by Jonathan S. Katz.
Discussion: https://postgr.es/m/20180721012446.GA1840594@rfd.leadboat.com
This clause was superseded by SQL-standard syntax back in 7.3.
We've kept it around for backwards-compatibility purposes ever since;
but 15 years seems like long enough for that, especially seeing that
there are undocumented weirdnesses in how it interacts with the
SQL-standard syntax for specifying the same options.
Michael Paquier, per an observation by Daniel Gustafsson;
some small cosmetic adjustments to nearby code by me.
Discussion: https://postgr.es/m/20180115022748.GB1724@paquier.xyz
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
Previously, type "unknown" was labeled as a base type in pg_type, which
perhaps had some sense to it because you were allowed to create tables with
unknown-type columns. But now that we don't allow that, it makes more
sense to label it a pseudo-type. This has the additional effects of
forbidding use of "unknown" as a domain base type, cast source or target
type, PL function argument or result type, or plpgsql local variable type;
all of which seem like good holes to plug.
Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com
Clarify that the reason for recommending that pg_temp be put last is to
prevent temporary tables from capturing unqualified table names. Per
discussion with Albe Laurenz.
Discussion: <A737B7A37273E048B164557ADEF4A58B5386C6E1@ntex2010i.host.magwien.gv.at>
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
The 9.2 patch that added argument name support in SQL-language functions
missed updating a parenthetical comment about that in the CREATE FUNCTION
reference page. Noted by Erwin Brandstetter.
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
in CREATE OR REPLACE FUNCTION. The original code would update pg_shdepend
as if a new function was being created, even if it wasn't, with two bad
consequences: pg_shdepend might record the wrong owner for the function,
and any dependencies for roles mentioned in the function's ACL would be lost.
The fix is very easy: just don't touch pg_shdepend at all when doing a
function replacement.
Also update the CREATE FUNCTION reference page, which never explained
exactly what changes and doesn't change in a function replacement.
In passing, fix the CREATE VIEW reference page similarly; there's no
code bug there, but the docs didn't say what happens.
to unload and re-load the library.
The difficulty with unloading a library is that we haven't defined safe
protocols for doing so. In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading. And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.
While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much. Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.
Back-patch to 8.2; before that, LOAD was superuser-only anyway.
Security: unprivileged users could crash backend. CVE not assigned yet
so that user-defined window functions are possible. For the moment you'll
have to write them in C, for lack of any interface to the WindowObject API
in the available PLs, but it's better than no support at all.
There was some debate about the best syntax for this. I ended up choosing
the "it's an attribute" position --- the other approach will inevitably be
more work, and the likely market for user-defined window functions is
probably too small to justify it.
