To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Commit caf626b2c missed that the relevant reloptions entry needs
to be moved from the intRelOpts[] array to realRelOpts[].
Somewhat surprisingly, it seems to work anyway, perhaps because
the desired default and limit values are all integers. We ought
to have either a simpler data structure or better cross-checking
here, but that's for another patch.
Nikolay Shaplov
Discussion: https://postgr.es/m/4861742.12LTaSB3sv@x200m
After 71bdc99d0d, "tableam: Add helper for indexes to check if a
corresponding table tuples exist." there's no in-core user left. As
there's unlikely to be an external user, and such an external user
could easily be adjusted to use table_index_fetch_tuple_check(),
remove heap_hot_search().
Per complaint from Peter Geoghegan
Author: Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzn0Oq4ftJrTqRAsWy2WGjv0QrJcwoZ+yqWsF_Z5vjUBFw@mail.gmail.com
This primarily is to allow WHERE CURRENT OF to continue to work as it
currently does. It's not clear to me that these semantics make sense
for every AM, but it works for the in-core heap, and the out of core
zheap. We can refine it further at a later point if necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Add additional heuristics to the algorithm for locating an optimal split
location. New logic identifies localized monotonically increasing
values in indexes with multiple columns. When this insertion pattern is
detected, page splits split just after the new item that provoked a page
split (or apply leaf fillfactor in the style of a rightmost page split).
This optimization is a variation of the long established leaf fillfactor
optimization used during rightmost page splits.
50/50 page splits are only appropriate with a pattern of truly random
insertions, where the average space utilization ends up at 65% - 70%.
Without this patch, affected cases have leaf pages that are no more than
about 50% full on average. Future insertions can never make use of the
free space left behind. With this patch, affected cases have leaf pages
that are about 90% full on average (assuming a fillfactor of 90).
Localized monotonically increasing insertion patterns are presumed to be
fairly common in real-world applications. There is a fair amount of
anecdotal evidence for this. Both pg_depend system catalog indexes
(pg_depend_depender_index and pg_depend_reference_index) are at least
20% smaller after the regression tests are run when the optimization is
available. Furthermore, many of the indexes created by a fair use
implementation of TPC-C for Postgres are consistently about 40% smaller
when the optimization is available.
Note that even pg_upgrade'd v3 indexes make use of this optimization.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzkpKeZJrXvR_p7VSY1b-s85E3gHyTbZQzR0BkJ5LrWF_A@mail.gmail.com
This is essentially the tableam version of heapam_fetch(),
i.e. fetching a tuple identified by a tid, performing visibility
checks.
Note that this different from table_index_fetch_tuple(), which is for
index lookups. It therefore has to handle a tid pointing to an earlier
version of a tuple if the AM uses an optimization like heap's HOT. Add
comments to that end.
This commit removes the stats_relation argument from heap_fetch, as
it's been unused for a long time.
Author: Andres Freund
Reviewed-By: Haribabu Kommi
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
It doesn't make sense to consider the possibility that there will only
be one candidate split point when choosing among split points to find
the split with the lowest penalty. This is a vestige of an earlier
version of the patch that became commit fab25024.
Issue spotted while rereviewing coverage of the nbtree patch series
using gcov.
Add command variants COMMIT AND CHAIN and ROLLBACK AND CHAIN, which
start new transactions with the same transaction characteristics as the
just finished one, per SQL standard.
Support for transaction chaining in PL/pgSQL is also added. This
functionality is especially useful when running COMMIT in a loop in
PL/pgSQL.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/28536681-324b-10dc-ade8-ab46f7645a5a@2ndquadrant.com
This adds new, required, table AM callbacks for insert/delete/update
and lock_tuple. To be able to reasonably use those, the EvalPlanQual
mechanism had to be adapted, moving more logic into the AM.
Previously both delete/update/lock call-sites and the EPQ mechanism had
to have awareness of the specific tuple format to be able to fetch the
latest version of a tuple. Obviously that needs to be abstracted
away. To do so, move the logic that find the latest row version into
the AM. lock_tuple has a new flag argument,
TUPLE_LOCK_FLAG_FIND_LAST_VERSION, that forces it to lock the last
version, rather than the current one. It'd have been possible to do
so via a separate callback as well, but finding the last version
usually also necessitates locking the newest version, making it
sensible to combine the two. This replaces the previous use of
EvalPlanQualFetch(). Additionally HeapTupleUpdated, which previously
signaled either a concurrent update or delete, is now split into two,
to avoid callers needing AM specific knowledge to differentiate.
The move of finding the latest row version into tuple_lock means that
encountering a row concurrently moved into another partition will now
raise an error about "tuple to be locked" rather than "tuple to be
updated/deleted" - which is accurate, as that always happens when
locking rows. While possible slightly less helpful for users, it seems
like an acceptable trade-off.
As part of this commit HTSU_Result has been renamed to TM_Result, and
its members been expanded to differentiated between updating and
deleting. HeapUpdateFailureData has been renamed to TM_FailureData.
The interface to speculative insertion is changed so nodeModifyTable.c
does not have to set the speculative token itself anymore. Instead
there's a version of tuple_insert, tuple_insert_speculative, that
performs the speculative insertion (without requiring a flag to signal
that fact), and the speculative insertion is either made permanent
with table_complete_speculative(succeeded = true) or aborted with
succeeded = false).
Note that multi_insert is not yet routed through tableam, nor is
COPY. Changing multi_insert requires changes to copy.c that are large
enough to better be done separately.
Similarly, although simpler, CREATE TABLE AS and CREATE MATERIALIZED
VIEW are also only going to be adjusted in a later commit.
Author: Andres Freund and Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190313003903.nwvrxi7rw3ywhdel@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Teach nbtree forward index scans to check the high key before moving to
the right sibling page in the hope of finding that it isn't actually
necessary to do so. The new check may indicate that the scan definitely
cannot find matching tuples to the right, ending the scan immediately.
We already opportunistically force a similar "continuescan orientated"
key check of the final non-pivot tuple when it's clear that it cannot be
returned to the scan due to being dead-to-all. The new high key check
is complementary.
The new approach for forward scans is more effective than checking the
final non-pivot tuple, especially with composite indexes and non-unique
indexes. The improvements to the logic for picking a split point added
by commit fab25024 make it likely that relatively dissimilar high keys
will appear on a page. A distinguishing key value that can only appear
on non-pivot tuples on the right sibling page will often be present in
leaf page high keys.
Since forcing the final item to be key checked no longer makes any
difference in the case of forward scans, the existing extra key check is
now only used for backwards scans. Backward scans continue to
opportunistically check the final non-pivot tuple, which is actually the
first non-pivot tuple on the page (not the last).
Note that even pg_upgrade'd v3 indexes make use of this optimization.
Author: Peter Geoghegan, Heikki Linnakangas
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzkOmUduME31QnuTFpimejuQoiZ-HOf0pOWeFZNhTMctvA@mail.gmail.com
To do this, we scan GiST two times. In the first pass we make note of
empty leaf pages and internal pages. At second pass we scan through
internal pages, looking for downlinks to the empty pages.
Deleting internal pages is still not supported, like in nbtree, the last
child of an internal page is never deleted. That means that if you have a
workload where new keys are always inserted to different area than where
old keys are removed, the index will still grow without bound. But the rate
of growth will be an order of magnitude slower than before.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/B1E4DF12-6CD3-4706-BDBD-BF3283328F60@yandex-team.ru
This adds a flag "deterministic" to collations. If that is false,
such a collation disables various optimizations that assume that
strings are equal only if they are byte-wise equal. That then allows
use cases such as case-insensitive or accent-insensitive comparisons
or handling of strings with different Unicode normal forms.
This functionality is only supported with the ICU provider. At least
glibc doesn't appear to have any locales that work in a
nondeterministic way, so it's not worth supporting this for the libc
provider.
The term "deterministic comparison" in this context is from Unicode
Technical Standard #10
(https://unicode.org/reports/tr10/#Deterministic_Comparison).
This patch makes changes in three areas:
- CREATE COLLATION DDL changes and system catalog changes to support
this new flag.
- Many executor nodes and auxiliary code are extended to track
collations. Previously, this code would just throw away collation
information, because the eventually-called user-defined functions
didn't use it since they only cared about equality, which didn't
need collation information.
- String data type functions that do equality comparisons and hashing
are changed to take the (non-)deterministic flag into account. For
comparison, this just means skipping various shortcuts and tie
breakers that use byte-wise comparison. For hashing, we first need
to convert the input string to a canonical "sort key" using the ICU
analogue of strxfrm().
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com
Teach nbtree to give some consideration to how "distinguishing"
candidate leaf page split points are. This should not noticeably affect
the balance of free space within each half of the split, while still
making suffix truncation truncate away significantly more attributes on
average.
The logic for choosing a leaf split point now uses a fallback mode in
the case where the page is full of duplicates and it isn't possible to
find even a minimally distinguishing split point. When the page is full
of duplicates, the split should pack the left half very tightly, while
leaving the right half mostly empty. Our assumption is that logical
duplicates will almost always be inserted in ascending heap TID order
with v4 indexes. This strategy leaves most of the free space on the
half of the split that will likely be where future logical duplicates of
the same value need to be placed.
The number of cycles added is not very noticeable. This is important
because deciding on a split point takes place while at least one
exclusive buffer lock is held. We avoid using authoritative insertion
scankey comparisons to save cycles, unlike suffix truncation proper. We
use a faster binary comparison instead.
Note that even pg_upgrade'd v3 indexes make use of these optimizations.
Benchmarking has shown that even v3 indexes benefit, despite the fact
that suffix truncation will only truncate non-key attributes in INCLUDE
indexes. Grouping relatively similar tuples together is beneficial in
and of itself, since it reduces the number of leaf pages that must be
accessed by subsequent index scans.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzmmoLNQOj9mAD78iQHfWLJDszHEDrAzGTUMG3mVh5xWPw@mail.gmail.com
Make nbtree treat all index tuples as having a heap TID attribute.
Index searches can distinguish duplicates by heap TID, since heap TID is
always guaranteed to be unique. This general approach has numerous
benefits for performance, and is prerequisite to teaching VACUUM to
perform "retail index tuple deletion".
Naively adding a new attribute to every pivot tuple has unacceptable
overhead (it bloats internal pages), so suffix truncation of pivot
tuples is added. This will usually truncate away the "extra" heap TID
attribute from pivot tuples during a leaf page split, and may also
truncate away additional user attributes. This can increase fan-out,
especially in a multi-column index. Truncation can only occur at the
attribute granularity, which isn't particularly effective, but works
well enough for now. A future patch may add support for truncating
"within" text attributes by generating truncated key values using new
opclass infrastructure.
Only new indexes (BTREE_VERSION 4 indexes) will have insertions that
treat heap TID as a tiebreaker attribute, or will have pivot tuples
undergo suffix truncation during a leaf page split (on-disk
compatibility with versions 2 and 3 is preserved). Upgrades to version
4 cannot be performed on-the-fly, unlike upgrades from version 2 to
version 3. contrib/amcheck continues to work with version 2 and 3
indexes, while also enforcing stricter invariants when verifying version
4 indexes. These stricter invariants are the same invariants described
by "3.1.12 Sequencing" from the Lehman and Yao paper.
A later patch will enhance the logic used by nbtree to pick a split
point. This patch is likely to negatively impact performance without
smarter choices around the precise point to split leaf pages at. Making
these two mostly-distinct sets of enhancements into distinct commits
seems like it might clarify their design, even though neither commit is
particularly useful on its own.
The maximum allowed size of new tuples is reduced by an amount equal to
the space required to store an extra MAXALIGN()'d TID in a new high key
during leaf page splits. The user-facing definition of the "1/3 of a
page" restriction is already imprecise, and so does not need to be
revised. However, there should be a compatibility note in the v12
release notes.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas, Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-WzkVb0Kom=R+88fDFb=JSxZMFvbHVC6Mn9LJ2n=X=kS-Uw@mail.gmail.com
Use dedicated struct to represent nbtree insertion scan keys. Having a
dedicated struct makes the difference between search type scankeys and
insertion scankeys a lot clearer, and simplifies the signature of
several related functions. This is based on a suggestion by Andrey
Lepikhov.
Streamline how unique index insertions cache binary search progress.
Cache the state of in-progress binary searches within _bt_check_unique()
for later instead of having callers avoid repeating the binary search in
an ad-hoc manner. This makes it easy to add a new optimization:
_bt_check_unique() now falls out of its loop immediately in the common
case where it's already clear that there couldn't possibly be a
duplicate.
The new _bt_check_unique() scheme makes it a lot easier to manage cached
binary search effort afterwards, from within _bt_findinsertloc(). This
is needed for the upcoming patch to make nbtree tuples unique by
treating heap TID as a final tiebreaker column. Unique key binary
searches need to restore lower and upper bounds. They cannot simply
continue to use the >= lower bound as the offset to insert at, because
the heap TID tiebreaker column must be used in comparisons for the
restored binary search (unlike the original _bt_check_unique() binary
search, where scankey's heap TID column must be omitted).
Author: Peter Geoghegan, Heikki Linnakangas
Reviewed-By: Heikki Linnakangas, Andrey Lepikhov
Discussion: https://postgr.es/m/CAH2-WzmE6AhUdk9NdWBf4K3HjWXZBX3+umC7mH7+WDrKcRtsOw@mail.gmail.com
Commit f2dec34e1 changed things so that printtup's output stringinfo
buffer was allocated outside the per-row temporary context, not inside
it. This creates a need to free that buffer explicitly when the temp
context is freed, but that was overlooked. In most cases, this is all
happening inside a portal or executor context that will go away shortly
anyhow, but that's not always true. Notably, the stringinfo ends up
getting leaked when JDBC uses row-at-a-time fetches. For a query
that returns wide rows, that adds up after awhile.
Per bug #15700 from Matthias Otterbach. Back-patch to v11 where the
faulty code was added.
Discussion: https://postgr.es/m/15700-8c408321a87d56bb@postgresql.org
Many places need both, so this allows a few functions to take one
fewer parameter. More importantly, as soon as we add a VACUUM
option that takes a non-Boolean parameter, we need to replace
'int options' with a struct, and it seems better to think
of adding more fields to VacuumParams rather than passing around
both VacuumParams and a separate struct as well.
Patch by me, reviewed by Masahiko Sawada
Discussion: http://postgr.es/m/CA+Tgmob6g6-s50fyv8E8he7APfwCYYJ4z0wbZC2yZeSz=26CYQ@mail.gmail.com
ce6afc6 has begun the refactoring work by plugging pg_rewind into a
central routine to update the control file, and left around two extra
copies, with one in xlog.c for the backend and one in pg_resetwal.c. By
adding an extra option to the central routine in controldata_utils.c to
control if a flush of the control file needs to be done, it is proving
to be straight-forward to make xlog.c and pg_resetwal.c use the central
code path at the condition of moving the wait event tracking there.
Hence, this allows to have only one central code path to update the
control file, shaving the code from the duplicates.
This refactoring actually fixes a problem in pg_resetwal. Previously,
the control file was first removed before being recreated. So if a
crash happened between the moment the file was removed and the moment
the file was created, then it would have been possible to not have a
control file anymore in the database folder.
Author: Fabien Coelho
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903170935210.2506@lancre
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
Commit 40dae7ec53, which made the nbtree page split algorithm more
robust, made _bt_insert_parent() only unlock the right child of the
parent page before inserting a new downlink into the parent. Update a
comment from the Berkeley days claiming that both left and right child
pages are unlocked before the new downlink actually gets inserted.
The claim that it is okay to release both locks early based on Lehman
and Yao's say-so never made much sense. Lehman and Yao must sometimes
"couple" buffer locks across a pair of internal pages when relocating a
downlink, unlike the corresponding code within _bt_getstack().
Previously ParallelTableScanDescData was just a member in BTShared,
but after c2fe139c2 that doesn't guarantee sufficient alignment as
specific AMs might (are likely to) need atomic variables in the
struct.
One might think that MAXALIGNing would be sufficient, but as a
comment in shm_toc_allocate() explains, that's not enough. For now,
copy the hack described there.
For parallel sequential scans no such change is needed, as its
allocations go through shm_toc_allocate().
An alternative approach would have been to allocate the parallel scan
descriptor in a separate TOC entry, but there seems little benefit in
doing so.
Per buildfarm member dromedary.
Author: Andres Freund
Discussion: https://postgr.es/m/20190311203126.ty5gbfz42gjbm6i6@alap3.anarazel.de
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
93473c6 has removed openLogOff, changing on the way the error message
which is used to report partial writes to WAL segments. The
newly-introduced error message used the offset up to which the write has
happened, keeping always the same total length to write. This changes
the error message so as the number of bytes left to write are reported.
Reported-by: Michael Paquier
Author: Robert Haas
Discussion: https://postgr.es/m/20190306235251.GA17293@paquier.xyz
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Similarly to B-tree, GiST index access method gets support of INCLUDE
attributes. These attributes aren't used for tree navigation and aren't
present in non-leaf pages. But they are present in leaf pages and can be
fetched during index-only scan.
The point of having INCLUDE attributes in GiST indexes is slightly different
from the point of having them in B-tree. The main point of INCLUDE attributes
in B-tree is to define UNIQUE constraint over part of attributes enabled for
index-only scan. In GiST the main point of INCLUDE attributes is to use
index-only scan for attributes, whose data types don't have GiST opclasses.
Discussion: https://postgr.es/m/73A1A452-AD5F-40D4-BD61-978622FF75C1%40yandex-team.ru
Author: Andrey Borodin, with small changes by me
Reviewed-by: Andreas Karlsson
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
Scanning an index in physical order is faster than walking it in logical
order, because sequential I/O is faster than random I/O. The idea and code
structure is borrowed from B-tree vacuum code.
Patch by Andrey Borodin, with changes by me. Based on early work by
Konstantin Kuznetsov, although the patch has been rewritten multiple times
since his original version.
Discussion: https://www.postgresql.org/message-id/1B9FAC6F-FA19-4A24-8C1B-F4F574844892%40yandex-team.ru
StoreIndexTuple was a loop over index_getattr, which is O(N^2)
if the index columns are variable-width, and the performance
impact is already quite visible at ten columns. The obvious
move is to replace that with a call to index_deform_tuple ...
but that's *also* a loop over index_getattr. Improve it to
be essentially a clone of heap_deform_tuple.
(There are a few other places that loop over all index columns
with index_getattr, and perhaps should be changed likewise,
but most of them don't seem performance-critical. Anyway, the
rest would mostly only be interested in the index key columns,
which there aren't likely to be so many of. Wide index tuples
are a new thing with INCLUDE.)
Konstantin Knizhnik
Discussion: https://postgr.es/m/e06b2d27-04fc-5c0e-bb8c-ecd72aa24959@postgrespro.ru
After commit b0eaa4c51b, we use a local map of pages to find the required
space for small relations. We do clear this map when we have found a block
with enough free space, when we extend the relation, or on transaction
abort so that it can be used next time. However, we miss to clear it when
we didn't find any pages to try from the map which leads to an assertion
failure when we later tried to use it after relation extension.
In the passing, I have improved some comments in this area.
Reported-by: Tom Lane based on buildfarm results
Author: Amit Kapila
Reviewed-by: John Naylor
Tested-by: Kuntal Ghosh
Discussion: https://postgr.es/m/32368.1551114120@sss.pgh.pa.us
We have forboth() and forthree() macros that simplify iterating
through several parallel lists, but not everyplace that could
reasonably use those was doing so. Also invent forfour() and
forfive() macros to do the same for four or five parallel lists,
and use those where applicable.
The immediate motivation for doing this is to reduce the number
of ad-hoc lnext() calls, to reduce the footprint of a WIP patch.
However, it seems like good cleanup and error-proofing anyway;
the places that were combining forthree() with a manually iterated
loop seem particularly illegible and bug-prone.
There was some speculation about restructuring related parsetree
representations to reduce the need for parallel list chasing of
this sort. Perhaps that's a win, or perhaps not, but in any case
it would be considerably more invasive than this patch; and it's
not particularly related to my immediate goal of improving the
List infrastructure. So I'll leave that question for another day.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
_bt_getstackbuf() is called at exactly two points following commit
efada2b8e9 (one call site is concerned with page splits, while the
other is concerned with page deletion). The parent buffer returned by
_bt_getstackbuf() is write-locked in both cases. Remove the 'access'
argument and make _bt_getstackbuf() assume that callers require a
write-lock.
Commit efada2b8e9, which made the nbtree page deletion algorithm more
robust, removed _bt_getstackbuf() calls from _bt_pagedel(). It failed
to update a comment that referenced the earlier approach. Update the
comment to explain that the _bt_getstackbuf() page deletion call site
mirrors the only other remaining _bt_getstackbuf() call site, which is
reached during page splits.
When preparing a transaction in two-phase commit, a dummy PGPROC entry
holding the GID used for the transaction is registered, which gets
released once COMMIT PREPARED is run. Prior releasing its shared memory
state, all the locks taken in the prepared transaction are released
using a dedicated set of callbacks (pgstat and multixact having similar
callbacks), which may cause the locks to be released before the GID is
set free.
Hence, there is a small window where lock conflicts could happen, for
example:
- Transaction A releases its locks, still holding its GID in shared
memory.
- Transaction B held a lock which conflicted with locks of transaction
A.
- Transaction B continues its processing, reusing the same GID as
transaction A.
- Transaction B fails because of a conflicting GID, already in use by
transaction A.
This commit changes the shared memory state release so as post-commit
callbacks and predicate lock cleanup happen consistently with the shared
memory state cleanup for the dummy PGPROC entry. The race window is
small and 2PC had this issue from the start, so no backpatch is done.
On top if that fixes discussed involved ABI breakages, which are not
welcome in stable branches.
Reported-by: Oleksii Kliukin, Ildar Musin
Diagnosed-by: Oleksii Kliukin, Ildar Musin
Author: Michael Paquier
Reviewed-by: Masahiko Sawada, Oleksii Kliukin
Discussion: https://postgr.es/m/BF9B38A4-2BFF-46E8-BA87-A2D00A8047A6@hintbits.com
When reading a new page internally and depending on the way the WAL
reader facility gets used by plugins, the current implementation of the
WAL reader may finish by reading a block multiple times while it is not
actually necessary as the requested data length may be equal to what has
been already read. This can happen for any size, but is more likely to
happen at the end of a page. This can cause performance penalties in
plugins which rely on the block reads to be purely sequential, zlib not
liking backward reads for example. The new behavior also shaves some
cycles when doing recovery.
Author: Arthur Zakirov
Reviewed-by: Andrey Lepikhov, Michael Paquier, Grigory Smolkin
Discussion: https://postgr.es/m/2ddf4a32-517e-d6f4-d992-4a63b6035bfd@postgrespro.ru
Test for the compiler builtins __builtin_clz, __builtin_ctz, and
__builtin_popcount, and make use of these in preference to
handwritten C code if they're available. Create src/port
infrastructure for "leftmost one", "rightmost one", and "popcount"
so as to centralize these decisions.
On x86_64, __builtin_popcount generally won't make use of the POPCNT
opcode because that's not universally supported yet. Provide code
that checks CPUID and then calls POPCNT via asm() if available.
This requires indirecting through a function pointer, which is
an annoying amount of overhead for a one-instruction operation,
but it's probably not worth working harder than this for our
current use-cases.
I'm not sure we've found all the existing places that could profit
from this new infrastructure; but we at least touched all the
ones that used copied-and-pasted versions of the bitmapset.c code,
and got rid of multiple copies of the associated constant arrays.
While at it, replace c-compiler.m4's one-per-builtin-function
macros with a single one that can handle all the cases we need
to worry about so far. Also, because I'm paranoid, make those
checks into AC_LINK checks rather than just AC_COMPILE; the
former coding failed to verify that libgcc has support for the
builtin, in cases where it's not inline code.
David Rowley, Thomas Munro, Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Andres Freund
Tom Lane
Michael Paquier
Peter Geoghegan
Peter Eisentraut
Heikki Linnakangas
Robert Haas
Thomas Munro
Amit Kapila
Alvaro Herrera
Alexander Korotkov