This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
In the past, relhassubclass always remained true if a relation had ever had
child relations, even if the last subclass was long gone. While this had
only marginal performance implications in most cases, it was annoying, and
I'm now considering some planner changes that would raise the cost of a
false positive. It was previously impractical to fix this because of race
condition concerns. However, given the recent change that made tablecmds.c
take ShareExclusiveLock on relations that are gaining a child (commit
fbcf4b92aa), we can now allow ANALYZE to
clear the flag when it's no longer relevant. There is no additional
locking cost to do so, since ANALYZE takes ShareExclusiveLock anyway.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
When creating a new schema for a non-relocatable extension, we neglected
to check whether the calling user has permission to create schemas.
That didn't matter in the original coding, since we had already checked
superuserness, but in the new dispensation where users need not be
superusers, we should check it. Use CreateSchemaCommand() rather than
calling NamespaceCreate() directly, so that we also enforce the rules
about reserved schema names.
Per complaint from KaiGai Kohei, though this isn't the same as his patch.
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
This works around the problem that a catalog cache entry might contain a
toast pointer that we try to dereference just as a VACUUM FULL completes
on that catalog. We will see the sinval message on the cache entry when
we acquire lock on the toast table, but by that point we've already told
tuptoaster.c "here's the pointer to fetch", so it's difficult from a code
structural standpoint to update the pointer before we use it. Much less
painful to ensure that toast pointers are not invalidated in the first
place. We have to add a bit of code to deal with the case that a value
that previously wasn't toasted becomes so; but that should be a
seldom-exercised corner case, so the inefficiency shouldn't be significant.
Back-patch to 9.0. In prior versions, we didn't allow CLUSTER on system
catalogs, and VACUUM FULL didn't result in reassignment of toast OIDs, so
there was no problem.
When updating or deleting a system catalog tuple, it's necessary to acquire
RowExclusiveLock on the catalog before looking up the tuple; otherwise a
concurrent VACUUM FULL on the catalog might move the tuple to a different
TID before we can apply the update. Coding patterns that find the tuple
via a table scan aren't at risk here, but when obtaining the tuple from a
catalog cache, correct ordering is important; and several routines in
foreigncmds.c got it wrong. Noted while running the regression tests in
parallel with VACUUM FULL of assorted system catalogs.
For consistency I moved all the heap_open calls to the starts of their
functions, including a couple for which there was no actual bug.
Back-patch to 8.4 where foreigncmds.c was added.
Instead of entering them on transaction startup, we materialize them
only when someone wants to wait, which will occur only during CREATE
INDEX CONCURRENTLY. In Hot Standby mode, the startup process must also
be able to probe for conflicting VXID locks, but the lock need never be
fully materialized, because the startup process does not use the normal
lock wait mechanism. Since most VXID locks never need to touch the
lock manager partition locks, this can significantly reduce blocking
contention on read-heavy workloads.
Patch by me. Review by Jeff Davis.
The original implementation simply did nothing when replacing an existing
object during CREATE EXTENSION. The folly of this was exposed by a report
from Marc Munro: if the existing object belongs to another extension, we
are left in an inconsistent state. We should insist that the object does
not belong to another extension, and then add it to the current extension
if not already a member.
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
This is useful since a validator might want to require certain options
to be provided. The passed array is an empty text array in this case.
Per suggestion by Laurenz Albe, though this is not quite his patch.
The bug that caused this to be discovered is that the code was trying to
dereference a NULL or ill-defined pointer, as reported by Michael Mueller;
but what it was doing was wrong anyway, per Heikki.
This patch is Heikki's suggested fix.
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
Some callers were creating copies of tuple descriptors to pass to that
function, stating in code comments that it was necessary because it
modified the passed descriptor. Code inspection reveals this not to be
true, and indeed not all callers are passing copies in the first place.
So remove the extra ones and the misleading comments about this behavior
as well.
I mis-simplified the test where ANALYZE decided if it could get away
without doing anything: under the new regime, that's never allowed. Per
bug #6068 from Jeff Janes. Back-patch to 8.4, just like previous patch.
We had already converted most places to this style, but this patch gets the
last few that were still doing it the old way. The main advantage is that
this exposes a greppable name for each target column, rather than having
to rely on comments (which a couple of places failed to provide anyhow).
Richard Hopkins, additional work by me to clean up update_attstats() too
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
Truncating or dropping a table is treated like deletion of all tuples, and
check for conflicts accordingly. If a table is clustered or rewritten by
ALTER TABLE, all predicate locks on the heap are promoted to relation-level
locks, because the tuple or page ids of any existing tuples will change and
won't be valid after rewriting the table. Arguably ALTER TABLE should be
treated like a mass-UPDATE of every row, but if you e.g change the datatype
of a column, you could also argue that it's just a change to the physical
layout, not a logical change. Reindexing promotes all locks on the index to
relation-level lock on the heap.
Kevin Grittner, with a lot of cosmetic changes by me.
My previous commit disallowed this operation, but did nothing about
cleaning up the damage if one had already been done. With the operation
disallowed, it's okay to just forcibly clear xmax in a sequence's tuple,
since any value seen there could not represent a live transaction's lock.
So, any sequence-specific operation will repair the problem automatically,
whether or not the user has already seen "could not access status of
transaction" failures.
When we added the ability for vacuum to skip heap pages by consulting the
visibility map, we made it just not update the reltuples/relpages
statistics if it skipped any pages. But this could leave us with extremely
out-of-date stats for a table that contains any unchanging areas,
especially for TOAST tables which never get processed by ANALYZE. In
particular this could result in autovacuum making poor decisions about when
to process the table, as in recent report from Florian Helmberger. And in
general it's a bad idea to not update the stats at all. Instead, use the
previous values of reltuples/relpages as an estimate of the tuple density
in unvisited pages. This approach results in a "moving average" estimate
of reltuples, which should converge to the correct value over multiple
VACUUM and ANALYZE cycles even when individual measurements aren't very
good.
This new method for updating reltuples is used by both VACUUM and ANALYZE,
with the result that we no longer need the grotty interconnections that
caused ANALYZE to not update the stats depending on what had happened
in the parent VACUUM command.
Also, fix the logic for skipping all-visible pages during VACUUM so that it
looks ahead rather than behind to decide what to do, as per a suggestion
from Greg Stark. This eliminates useless scanning of all-visible pages at
the start of the relation or just after a not-all-visible page. In
particular, the first few pages of the relation will not be invariably
included in the scanned pages, which seems to help in not overweighting
them in the reltuples estimate.
Back-patch to 8.4, where the visibility map was introduced.
This is necessary to avoid long-term memory leakage, because the main loop
in PostgresMain expects to be executing in MessageContext, and hence is a
bit sloppy about freeing stuff that is only needed for the duration of
processing the current client message. The known case of an actual leak
is when encoding conversion has to be done on the incoming command string,
but there might be others. Per report from Per-Olov Esgard.
Back-patch to 9.0, where the bug was introduced by the LISTEN/NOTIFY
rewrite.
We must lock out autovacuuming of the old toast table before computing the
OldestXmin horizon we will use. Otherwise, autovacuum could start on the
toast table later, compute a later OldestXmin horizon, and remove as DEAD
toast tuples that we still need (because we think their parent tuples are
only RECENTLY_DEAD). Per further thought about bug #5998.
Per discussion, removing the hint seems better than correcting it because
the adjacent analogous cases in RenameRelation don't have any hints, and
nobody seems to have missed 'em.
Shigeru Hanada
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
While "UTF8" is the correct name for this encoding, existing JDBC drivers
expect that if they send "UNICODE" it will read back the same way; they
fail with an opaque "Protocol error" complaint if not. This will be fixed
in the 9.1 drivers, but until older drivers are no longer in use in the
wild, we'd better leave "UNICODE" alone. Continue to canonicalize all
other inputs. Per report from Steve Singer and subsequent discussion.
The other DDL operations that create an inheritance relationship were
checking for collation match already, but this one got missed.
Also fix comments that failed to mention collation checks.
For what seem entirely historical reasons, a bitmask "flags" argument was
recently added to reindex_relation without subsuming its existing boolean
argument into that bitmask. This seems a bit bizarre, so fold them
together.
The lock level for adding a parent table is now ShareUpdateExclusiveLock;
see commit fbcf4b92aa. This comment didn't
get updated to match, but it doesn't seem important to mention this detail
here, so rather than updating it now, just take it out.
Instead of using slightly-too-clever heuristics to decide when we must
create a TOAST table, just check whether one is needed every time the
table is altered. Checking whether a toast table is needed is cheap
enough that we needn't worry about doing it on every ALTER TABLE command,
and the previous coding is apparently prone to accidental breakage:
commit 04e17bae50 broken ALTER TABLE ..
SET STORAGE, which moved some actions from AT_PASS_COL_ATTRS to
AT_PASS_MISC, and commit 6c57239985 broke
ALTER TABLE .. ADD COLUMN by changing the way that adding columns
recurses into child tables.
Noah Misch, with one comment change by me
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
Previous patches took care of assorted places that call transformExpr from
outside the main parser, but I overlooked the fact that some places use
transformWhereClause as a shortcut for transformExpr + coerce_to_boolean.
In particular this broke collation-sensitive index WHERE clauses, as per
report from Thom Brown. Trigger WHEN and rule WHERE clauses too.
I'm not forcing initdb for this fix, but any affected indexes, triggers,
or rules will need to be dropped and recreated.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
The previous coding set attinhcount too high in some cases, resulting in
an undumpable, undroppable column. Per bug #5856, reported by Naoya
Anzai. See also commit 31b6fc06d8, which
fixes a similar bug in ALTER TABLE .. ADD CONSTRAINT.
Patch by Noah Misch.
This mostly involves making it work with the objectaddress.c framework,
which does most of the heavy lifting. In that vein, change
GetForeignDataWrapperOidByName to get_foreign_data_wrapper_oid and
GetForeignServerOidByName to get_foreign_server_oid, to match the
pattern we use for other object types.
Robert Haas and Shigeru Hanada
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
Ensure that COLLATE at the top level of an index expression is treated the
same as a grammatically separate COLLATE. Fix bogus reverse-parsing logic
in pg_get_indexdef.
pg_newlocale_from_collation does not have enough context to give an error
message that's even a little bit useful, so move the responsibility for
complaining up to its callers. Also, reword ERRCODE_INDETERMINATE_COLLATION
error messages in a less jargony, more message-style-guide-compliant
fashion.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
When adding an inheritance parent to a table, an AccessShareLock on the
parent isn't strong enough to prevent trouble, so take
ShareUpdateExclusiveLock instead. Since this is a behavior change,
albeit a fairly unobtrusive one, and since we have only one report
from the field, no back-patch.
Report by Jon Nelson, analysis by Alvaro Herrera, fix by me.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Formerly, any member of a role could change the role's comment, as of
course could superusers; but holders of CREATEROLE privilege could not,
unless they were also members. This led to the odd situation that a
CREATEROLE holder could create a role but then could not comment on it.
It also seems a bit dubious to let an unprivileged user change his own
comment, let alone those of group roles he belongs to. So, change the
rule to be "you must be superuser to comment on a superuser role, or
hold CREATEROLE to comment on non-superuser roles". This is the same
as the privilege check for creating/dropping roles, and thus fits much
better with the rule for other object types, namely that only the owner
of an object can comment on it.
In passing, clean up the documentation for COMMENT a little bit.
Per complaint from Owen Jacobson and subsequent discussion.
contains newly-inserted tuples that according to our OldestXmin are not
yet visible to everyone. The value returned by GetOldestXmin() is conservative,
and it can move backwards on repeated calls, so if we see that contradiction
between the PD_ALL_VISIBLE flag and status of tuples on the page, we have to
assume it's because an earlier vacuum calculated a higher OldestXmin value,
and all the tuples really are visible to everyone.
We have received several reports of this bug, with the "PD_ALL_VISIBLE flag
was incorrectly set in relation ..." warning appearing in logs. We were
finally able to hunt it down with David Gould's help to run extra diagnostics
in an environment where this happened frequently.
Also reword the warning, per Robert Haas' suggestion, to not imply that the
PD_ALL_VISIBLE flag is necessarily at fault, as it might also be a symptom
of corruption on a tuple header.
Backpatch to 8.4, where the PD_ALL_VISIBLE flag was introduced.
This mostly just involves creating control, install, and
update-from-unpackaged scripts for them. However, I had to adjust plperl
and plpython to not share the same support functions between variants,
because we can't put the same function into multiple extensions.
catversion bump forced due to new contents of pg_pltemplate, and because
initdb now installs plpgsql as an extension not a bare language.
Add support for regression testing these as extensions not bare
languages.
Fix a couple of other issues that popped up while testing this: my initial
hack at pg_dump binary-upgrade support didn't work right, and we don't want
an extra schema permissions test after all.
Documentation changes still to come, but I'm committing now to see
whether the MSVC build scripts need work (likely they do).
It is possible that an expression ends up with a collatable type but
without a collation. CREATE TABLE AS could then create a table based
on that. But such a column cannot be dumped with valid SQL syntax, so
we disallow creating such a column.
per test report from Noah Misch
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
Tom Lane
Peter Eisentraut
Bruce Momjian
Robert Haas
Alvaro Herrera
Simon Riggs
Heikki Linnakangas
Magnus Hagander