cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
locks that logically should not be released, because when a subtransaction
overwrites XMAX all knowledge of the previous lock state is lost. It seems
unlikely that we will be able to fix this before 8.3...
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
reference pages documenting that these commands cannot be used within
a transaction block. Also make some minor improvements to the psql
reference page. Patch from Simon Riggs, minor editorialization by
myself.
one of the program's core data structures, make use of the existing
ability to selectively exclude TOC items by ID. Slightly more code but
much less likely to create future maintenance problems.
to process all inclusion switches then all exclusion switches, so that the
behavior is independent of switch ordering.
Use of -T does not cause non-table objects to be suppressed. And
the patterns are now interpreted the same way psql's \d commands do it,
rather than as pure regex commands; this allows for example -t schema.tab
to do what it should have been doing all along. Re-enable the --blobs
switch to do something useful, ie, add back blobs into a dump they were
otherwise suppressed from.
portable long options. But we have had portable long options for a long
time now, so this is obsolete. Now people have added options which *only*
work with -X but not as regular long option, so I'm putting a stop to this:
-X is deprecated; it still works, but it has been removed from the
documentation, and please don't add more of them.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
of the syntax as this fundamentally dead-end approach can, in particular
combinations of single and multi column assignments. Improve rather
inadequate documentation and provide some regression tests.
RETURNING play nice with views/rules. To wit, have the rule rewriter
rewrite any RETURNING clause found in a rule to produce what the rule's
triggering query asked for in its RETURNING clause, in particular drop
the RETURNING clause if no RETURNING in the triggering query. This
leaves the responsibility for knowing how to produce the view's output
columns on the rule author, without requiring any fundamental changes
in rule semantics such as adding new rule event types would do. The
initial implementation constrains things to ensure that there is
exactly one, unconditionally invoked RETURNING clause among the rules
for an event --- later we might be able to relax that, but for a post
feature freeze fix it seems better to minimize how much invention we do.
Per gripe from Jaime Casanova.
queries via a cursor, fetching a limited number of rows at a time and
therefore not risking exhausting memory. A disadvantage of the scheme
is that 'aligned' output mode will align each group of rows independently
leading to odd-looking output, but all the other output formats work
reasonably well. Chris Mair, with some additional hacking by moi.
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
such as debugging and performance measurement. This consists of two features:
a table of "rendezvous variables" that allows separately-loaded shared
libraries to communicate, and a new GUC setting "local_preload_libraries"
that allows libraries to be loaded into specific sessions without explicit
cooperation from the client application. To make local_preload_libraries
as flexible as possible, we do not restrict its use to superusers; instead,
it is restricted to load only libraries stored in $libdir/plugins/. The
existing LOAD command has also been modified to allow non-superusers to
LOAD libraries stored in this directory.
This patch also renames the existing GUC variable preload_libraries to
shared_preload_libraries (after a suggestion by Simon Riggs) and does some
code refactoring in dfmgr.c to improve clarity.
Korry Douglas, with a little help from Tom Lane.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
the DROP pass rather than the ADD_CONSTR pass. On examining the code I
think this was just an oversight rather than intentional, and it seems
to satisfy the principle of least surprise better than the alternative
solution that was discussed. Add an example to the ref page showing how
to do ALTER TYPE and update the default in one command. Per gripe from
Markus Bertheau that that wasn't possible.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
it can handle small fillfactors for ordinary-sized index entries without
failing on large ones; fix nbtinsert.c to distinguish leaf and nonleaf
pages; change the minimum fillfactor to 10% for all index types.
Open items:
There were a few tangentially related issues that have come up that I think
are TODOs. I'm likely to tackle one or two of these next so I'm interested in
hearing feedback on them as well.
. Constraints currently do not know anything about inheritance. Tom suggested
adding a coninhcount and conislocal like attributes have to track their
inheritance status.
. Foreign key constraints currently do not get copied to new children (and
therefore my code doesn't verify them). I don't think it would be hard to
add them and treat them like CHECK constraints.
. No constraints at all are copied to tables defined with LIKE. That makes it
hard to use LIKE to define new partitions. The standard defines LIKE and
specifically says it does not copy constraints. But the standard already has
an option called INCLUDING DEFAULTS; we could always define a non-standard
extension LIKE table INCLUDING CONSTRAINTS that gives the user the option to
request a copy including constraints.
. Personally, I think the whole attislocal thing is bunk. The decision about
whether to drop a column from children tables or not is something that
should be up to the user and trying to DWIM based on whether there was ever
a local definition or the column was acquired purely through inheritance is
hardly ever going to match up with user expectations.
. And of course there's the whole unique and primary key constraint issue. I
think to get any traction at all on this you have a prerequisite of a real
partitioned table implementation where the system knows what the partition
key is so it can recognize when it's a leading part of an index key.
Greg Stark
The former approach used ExclusiveLock on pg_database, which being a
cluster-wide lock meant only one of these operations could proceed at
a time; worse, it also blocked all incoming connections in ReverifyMyDatabase.
Now that we have LockSharedObject(), we can use locks of different types
applied to databases considered as objects. This allows much more
flexible management of the interlocking: two CREATE DATABASEs need not
block each other, and need not block connections except to the template
database being used. Similarly DROP DATABASE doesn't block unrelated
operations. The locking used in flatfiles.c is also much narrower in
scope than before. Per recent proposal.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
to fix regressions introduced in the recent patch adding additional
\connect options. This is based on work by Volkan YAZICI, although
this version of the patch doesn't bear much resemblance to Volkan's
version.
\connect takes 4 optional arguments: database name, user name, host
name, and port number. If any of those parameters are omitted or
specified as "-", the value of that parameter from the previous
connection is used instead; if there is no previous connection,
the libpq default is used. Note that this behavior makes it
impossible to reuse the libpq defaults without quitting psql and
restarting it; I don't really see the use case for needing to do
that.
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
default"
> or "NO SCROLL is the default", it will be rejected as incorrect. The
> reason is that the default behavior is different from either of these,
> as is explained in the NOTES section.
Ok, so *that's* where the bit about the query plan being simple enough.
Based on that, ISTM that it should be premissable for us to decide that
a cursor requiring a sort isn't "simple enough" to support SCROLL.
In any case, here's a patch that makes the non-standard behavior easier
for people to find.
Jim C. Nasby
comments on cluster global objects like databases, tablespaces, and
roles.
It touches a lot of places, but not much in the way of big changes. The
only design decision I made was to duplicate the query and manipulation
functions rather than to try and have them handle both shared and local
comments. I believe this is simpler for the code and not an issue for
callers because they know what type of object they are dealing with.
This has resulted in a shobj_description function analagous to
obj_description and backend functions [Create/Delete]SharedComments
mirroring the existing [Create/Delete]Comments functions.
pg_shdescription.h goes into src/include/catalog/
Kris Jurka
(optionally) to a new host and port without exiting psql. This
eliminates, IMHO, a surprise in that you can now connect to PostgreSQL
on a differnt machine from the one where you started your session. This
should help people who use psql as an administrative tool.
David Fetter
and DELETE. If specified, the alias must be used instead of the full
table name. Also, the alias currently cannot be used in the SET clause
of UPDATE.
Patch from Atsushi Ogawa, various editorialization by Neil Conway.
Along the way, make the rowtypes regression test pass if add_missing_from
is enabled, and add a new (skeletal) regression test for DELETE.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
cursors. Patch from Joachim Wieland, review and ediorialization by Neil
Conway. The view lists cursors defined by DECLARE CURSOR, using SPI, or
via the Bind message of the frontend/backend protocol. This means the
view does not list the unnamed portal or the portal created to implement
EXECUTE. Because we do list SPI portals, there might be more rows in
this view than you might expect if you are using SPI implicitly (e.g.
via a procedural language).
Per recent discussion on -hackers, the query string included in the
view for cursors defined by DECLARE CURSOR is based on
debug_query_string. That means it is not accurate if multiple queries
separated by semicolons are submitted as one query string. However,
there doesn't seem a trivial fix for that: debug_query_string
is better than nothing. I also changed SPI_cursor_open() to include
the source text for the portal it creates: AFAICS there is no reason
not to do this.
Update the documentation and regression tests, bump the catversion.
data type is unspecified or is declared to be "unknown", the type will
be inferred from the context in which the parameter is used. This was
already possible for protocol-level prepared statements.
permissions on the functions and operators contained in the opclass.
Since we already require superuser privilege to create an operator class,
there's no expansion-of-privilege hazard here, but if someone were to get
the idea of building an opclass containing functions that need security
restrictions, we'd better warn them off. Also, change the permission
checks from have-execute-privilege to have-ownership, and then comment
them all out since they're dead code anyway under the superuser restriction.
type definition. Because use of a type's I/O conversion functions isn't
access-checked, CREATE TYPE amounts to granting public execute permissions
on the functions, and so allowing it to anybody means that someone could
theoretically gain access to a function he's not supposed to be able to
execute. The parameter-type restrictions already enforced by CREATE TYPE
make it fairly unlikely that this oversight is meaningful in practice,
but still it seems like a good idea to plug the hole going forward.
Also, document the implicit grant just in case anybody gets the idea of
building I/O functions that might need security restrictions.
access information about the prepared statements that are available
in the current session. Original patch from Joachim Wieland, various
improvements by Neil Conway.
The "statement" column of the view contains the literal query string
sent by the client, without any rewriting or pretty printing. This
means that prepared statements created via SQL will be prefixed with
"PREPARE ... AS ", whereas those prepared via the FE/BE protocol will
not. That is unfortunate, but discussion on -patches did not yield an
efficient way to improve this, and there is some merit in returning
exactly what the client sent to the backend.
Catalog version bumped, regression tests updated.
DROP CONSTRAINT
This form drops constraints on a table. Currently, constraints on tables
are not required to have unique names, so there may be more than one
constraint matching the specified name. All matching constraints will be
dropped.
To my knowledge, it is no longer possible to create constraints with the
same name for the same relation. When you create a constraint and specify
the same name explictly, an error is raised. Implicit constraint creation
won't choose an existing name either and up to now you could not rename a
constraint. Renaming works with the patch I sent in a few hours ago but this
patch as well won't allow constraints with identical names on the same
relation.
The attached patch thus removes the note in the docs.
Joachim Wieland
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
emit when given the --clean option, in favor of individual DROP ROLE
commands. The old technique could not possibly work in 8.1, and was
never a very good idea anyway IMHO. The DROP ROLE approach has the
defect that the DROPs will fail for roles that own objects or have
privileges, but perhaps we can improve that later.
relocated after installation. We can't trust the installation paths
inserted into Makefile.global by configure, so instead we must get the
paths from pg_config. This requires extending pg_config to support all
the separately-configurable path names, but that was on TODO anyway.
for procedural languages. This replaces the hard-wired table I had
originally proposed as a stopgap solution. For the moment, the initial
contents only include languages shipped with the core distribution.
as per my recent proposal. For now the template data is hard-wired in
proclang.c --- this should be replaced later by a new shared system
catalog, but we don't want to force initdb during 8.1 beta. This change
lets us cleanly load existing dump files even if they contain outright
wrong information about a PL's support functions, such as a wrong path
to the shared library or a missing validator function. Also, we can
revert the recent kluges to make pg_dump dump PL support functions that
are stored in pg_catalog.
While at it, I removed the code in pg_regress that replaced $libdir
with a hardcoded path for temporary installations. This is no longer
needed given our support for relocatable installations.
erroring out as it has done for the last couple weeks. Document that this
form is now ignored because indexes can't usefully have different owners
from their parent tables. Fix pg_dump to not generate ALTER OWNER commands
for indexes.
other stuff; change \du and \dg to be role-aware (Stefan Kaltenbrunner).
Also make tab completion fetch the list of GUC variables from pg_settings
instead of having a hard-wired copy of the list (Tom Lane).
CPPFLAGS, CFLAGS, CFLAGS_SL, LDFLAGS, LDFLAGS_SL, and LIBS. Change it
so that invoking pg_config with no arguments reports all available
information, rather than just giving an error message. Per discussion.
This was not especially critical before, but it is now that we track
ownership dependencies --- the dependency for the rowtype *must* shift
to the new owner. Spotted by Bernd Helmle.
Also fix a problem introduced by recent change to allow non-superusers
to do ALTER OWNER in some cases: if the table had a toast table, ALTER
OWNER failed *even for superusers*, because the test being applied would
conclude that the new would-be owner had no create rights on pg_toast.
A side-effect of the fix is to disallow changing the ownership of indexes
or toast tables separately from their parent table, which seems a good
idea on the whole.
