project I am working on (Recall - a distributed, fault-tolerant,
replicated, storage framework @ http://www.fault-tolerant.org).
Recall is written in C++. I need to include the postgres headers and
there are some problems when including the headers w/C++.
Attached is a patch generated from postgres/src that fixes my problems.
I was hoping to get this into the main source. It's very small (2k) and
3 files are changed: backend/utils/fmgr/fmgr.c,
backend/utils/Gen_fmgrtab.sh.in, and include/access/tupdesc.h.
In C++, you get a multiply defined symbol because the variable
(FmgrInfo *fmgr_pl_finfo) is defined in the header (the patch moves it
to the .c file). The other problem in tupdesc.h is the use of typeid
is a problem in c++ (I renamed it to oidtypeid).
Thanks,
Neal Norwitz
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
under FreeBSD ... basically, if setproctitle() exists, use it ...
the draw back right now is the PS_SET_STATUS stuff doesn't work, but am looking
into that one right now ... at lesat now you can see who is connecting where
and from where ...
table for an average of NTUP_PER_BUCKET tuples/bucket, but cost_hashjoin
was assuming a target load of one tuple/bucket. This was causing a
noticeable underestimate of hashjoin costs.
(LIKE and regexp matches). These are not yet referenced in pg_operator,
so by default the system will continue to use eqsel/neqsel.
Also, tweak convert_to_scalar() logic so that common prefixes of strings
are stripped off, allowing better accuracy when all strings in a table
share a common prefix.
extern int inet_aton(const char *cp, struct in_addr * addr);
appearing before the optional #define for const, which was certain
to fail on a machine with neither const nor inet_aton().
all platforms, not just SCO. The operation is undefined for Unix-domain
sockets anyway. It seems SCO is not the only platform that complains
instead of treating the call as a no-op.
whether to do fsync or not, and if so (which should be seldom) just
do the fsync immediately. This way we need not build data structures
in md.c/fd.c for blind writes.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
Add a random number generator and seed setter (random(), SET SEED)
Fix up the interval*float8 math to carry partial months
into the time field.
Add float8*interval so we have symmetry in the available math.
Fix the parser and define.c to accept SQL92 types as field arguments.
Fix the parser to accept SQL92 types for CREATE TYPE, etc. This is
necessary to allow...
Bit/varbit support in contrib/bit cleaned up to compile and load
cleanly. Still needs some work before final release.
Implement the "SOME" keyword as a synonym for "ANY" per SQL92.
Implement ascii(text), ichar(int4), repeat(text,int4) to help
support the ODBC driver.
Enable the TRUNCATE() function mapping in the ODBC driver.
would crash, due to premature invocation of SetQuerySnapshot(). Clean
up problems with handling of multiple queries by splitting
pg_parse_and_plan into two routines. The old code would not, for
example, do the right thing with END; SELECT... submitted in one query
string when it had been in transaction abort state, because it'd decide
to skip planning the SELECT before it had executed the END. New
arrangement is simpler and doesn't force caller to plan if only
parse+rewrite is needed.
WHERE in a place where it can be part of a nestloop inner indexqual.
As the code stood, it put the same physical sub-Plan node into both
indxqual and indxqualorig of the IndexScan plan node. That confused
later processing in the optimizer (which expected that tracing the
subPlan list would visit each subplan node exactly once), and would
probably have blown up in the executor if the planner hadn't choked first.
Fix by making the 'fixed' indexqual be a complete deep copy of the
original indexqual, rather than trying to share nodes below the topmost
operator node. This had further ramifications though, because we were
making the aforesaid list of sub-Plan nodes during SS_process_sublinks
which is run before construction of the 'fixed' indexqual, meaning that
the copy of the sub-Plan didn't show up in that list. Fix by rearranging
logic so that the sub-Plan list is built by the final set_plan_references
pass, not in SS_process_sublinks. This may sound like a mess, but it's
actually a good deal cleaner now than it was before, because we are no
longer dependent on the assumption that planning will never make a copy
of a sub-Plan node.
In the event of an elog() while the mode was set to immediate write,
there was no way for it to be set back to the normal delayed write.
The mechanism was a waste of space and cycles anyway, since the only user
was varsup.c, which could perfectly well call FlushBuffer directly.
Now it does just that, and the notion of a write mode is gone.
Clean up grotty coding in them, too. AFAICS from the CVS logs, these
have been broken since Postgres95, so I'm not going to insist on an
initdb to fix them now...
costs using the inner path's parent->rows count as the number of tuples
processed per inner scan iteration. This is wrong when we are using an
inner indexscan with indexquals based on join clauses, because the rows
count in a Relation node reflects the selectivity of the restriction
clauses for that rel only. Upshot was that if join clause was very
selective, we'd drastically overestimate the true cost of the join.
Fix is to calculate correct output-rows estimate for an inner indexscan
when the IndexPath node is created and save it in the path node.
Change of path node doesn't require initdb, since path nodes don't
appear in saved rules.
to simplify constant expressions and expand SubLink nodes into SubPlans
is done in a separate routine subquery_planner() that calls union_planner().
We formerly did most of this work in query_planner(), but that's the
wrong place because it may never see the real targetlist. Splitting
union_planner into two routines also allows us to avoid redundant work
when union_planner is invoked recursively for UNION and inheritance
cases. Upshot is that it is now possible to do something like
select float8(count(*)) / (select count(*) from int4_tbl) from int4_tbl
group by f1;
which has never worked before.
incorrect descriptions of a couple of log-related functions.
I will not force an initdb for this, but log() on a numeric won't
work until you do one...
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
actually a type-coercion problem. If you have a function defined on
class A, and class B inherits from A, then the function ought to work
on class B as well --- but coerce_type didn't know that. Now it does.
mark query as having subselects if a subselect was added from a rule
WHERE condition (as opposed to a rule action). Also, fix adjustment
of varlevelsup so that it actually has some prospect of working when
inserting an expression containing a subselect into a subquery.
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
1) adds NetBSD shared lib support on both ELF and a.out platforms
2) replaces "-L$(LIBPQDIR) -lpq" with "$(LIBPQ)" defined in
Makefile.global. This makes it much easier to build stuff in
the source tree after you've already installed the libraries.
3) adds TEMPLATEDIR in Makefile.global that indicates where the
database templates are stored. This separates the template files
from real libraries that are installed in $(LIBDIR).
4) changes include order of <readline/readline.h> and <readline.h>.
The latest GNU readline installs its headers under a readline
subdirectory.
In addition to applying the patch below the following files need to be copied:
backend/port/dynloader:
bsd.h -> netbsd.h
bsd.c -> netbsd.c
include/port:
bsd.h -> netbsd.h
makefiles:
Makefile.bsd -> Makefile.netbsd
It would be great to see this incorporated into the source tree before
the 7.0 release is cut.
Thanks!
-- Johnny C. Lam <lamj@stat.cmu.edu>
as independent clauses in the grammar. analyze.c takes care of putting
the data where it belongs and complaining about invalid combinations.
Also, make TEMP (and TEMPORARY) non-reserved words.
such as bpchar(char_expression, N), and pull out the attrtypmod that
the function is coercing to. This allows correct deduction of the
column type in examples such as
CREATE VIEW v AS SELECT f1::char(8) FROM tbl;
Formerly we labeled v's column as char-of-unknown-length not char(8).
Also, this change causes the parser not to insert a redundant length
coercion function if the user has explicitly casted an INSERT or UPDATE
expression to the right length.
it's a good idea to choose the directory size based on the expected
number of entries. But ShmemInitHash was using a hard-wired constant.
Boo hiss. This accounts for recent report of postmaster failure when
asking for 64K or more buffers.
as a unary minus operator for numeric. Now that long numeric constants
will get converted to NUMERIC in early parsing, it's essential to have
numeric->int8 conversion to avoid 'can't convert' errors on undecorated
int8 constants. Threw in the rest for completeness while I was in the
area.
I did not force an initdb for this, since the system will still run
without the new pg_proc/pg_operator entries. Possibly I should've.
2. Regression tests fail for types int2 and int4 (which can easily be
fixed by adding entries to resultmap) aswell as float8 and geometry,
where floating point numbers appear to be rounded a little differently
than in your expected results (besides that I also need the positive
zeros file). I'm including a patch for the first 2, but I don't know
whether the latter two are actually a bug in postgres or a bug in the
OS or even allowed difference. I'm including my results for reference.
Rolf Grossmann
integers) to be strings instead of 'double'. We convert from string form
to internal representation only after type resolution has determined the
correct type for the constant. This eliminates loss-of-precision worries
and gets rid of the change in behavior seen at 17 digits with the
previous kluge.
represent the result of a binary-compatible type coercion. At runtime
it just evaluates its argument --- but during type resolution, exprType
will pick up the output type of the RelabelType node instead of the type
of the argument. This solves some longstanding problems with dropped
type coercions, an example being 'select now()::abstime::int4' which
used to produce date-formatted output, not an integer, because the
coercion to int4 was dropped on the floor.
a few bricks shy of a load concerning knowing all the date/time types.
This is real bad because it interferes with func_select_candidate()'s
willingness to disambiguate functions --- func_select_candidate() will
punt unless all the available choices have the same type category.
I think this whole mechanism needs redesigned, but in the meantime
this is a needed patch.
variable, instead calling same code in variable.c that is used to parse
SET DATESTYLE. Fix bug: although backend's startup datestyle had been
changed to ISO, 'RESET DATESTYLE' and 'SET DATESTYLE TO DEFAULT' didn't
know about it. For consistency I have made the latter two reset to the
PGDATESTYLE-defined initial value, which may not be the same as the
compiled-in default of ISO.
appropriate btree three-way comparison routine. Not clear why the
three-way comparison routines were being used in some paths and not
others in btree --- incomplete changes by someone long ago, maybe?
Anyway, this makes for a nice speedup in CREATE INDEX.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
this is an old patch which I have already submitted and never seen
in the sources. It corrects the datatype oids used in some iterator
functions. This bug has been reported to me by many other people.
contrib-datetime.patch
some code contributed by Reiner Dassing <dassing@wettzell.ifag.de>
contrib-makefiles.patch
fixes all my contrib makefiles which don't work with some compilers,
as reported to me by another user.
contrib-miscutil.patch
an old patch for one of my old contribs.
contrib-string.patch
a small change to the c-like text output functions. Now the '{'
is escaped only at the beginning of the string to distinguish it
from arrays, and the '}' is no more escaped.
elog-lineno.patch
adds the current lineno of CopyFrom to elog messages. This is very
useful when you load a 1 million tuples table from an external file
and there is a bad value somehere. Currently you get an error message
but you can't know where is the bad data. The patch uses a variable
which was declared static in copy.c. The variable is now exported
and initialized to 0. It is always cleared at the end of the copy
or at the first elog message or when the copy is canceled.
I know this is very ugly but I can't find any better way of knowing
where the copy fails and I have this problem quite often.
plperl-makefile.patch
fixes a typo in a makefile, but the error must be elsewhere because
it is a file generated automatically. Please have a look.
tprintf-timestamp.patch
restores the original 2-digit year format, assuming that the two
century digits don't carry much information and that '000202' is
easier to read than 20000202. Being only a log file it shouldn't
break anything.
Please apply the patches before the next scheduled code freeze.
I also noticed that some of the contribs don't compile correcly. Should we
ask people to fix their code or rename their makefiles so that they are
ignored by the top makefile?
--
Massimo Dal Zotto
a switch statement that has an empty default label. A label of a
switch statement must be followed by a statement (or a label which
is followed by a statement (or a label which ...)).
3. Files include stringinfo.h failed to compile. The macro,
'appendStringInfoCharMacro' is implemented with a '?:' operation
that returns a void expression for the true part and a char expresion
for the false part. Both the true and false parts of the '?:' oper-
ator must return the same type.
Billy G. Allie
am including a patch to get it compile.
changes to psql:
- added less as default pager when compiling on Cygwin
- need to declare "filename_completion_function" because it is not exported
from readline -> added to include/port/win.h
changes to pg_id:
- include of <getopt.h>
- add .exe when installing
I think there is a problem with calling the regress tests on WinNT - it
should be called with PORTNAME not HOST as the parameter to regress.sh or
the check when to add "-h localhost" to psql has to be changed. Now it is
checked against the PORTNAME.
The results of the regress tests were OK with expected failures ;-)
Daniel Horak
The PostgreSQL's to_char() is very compatible with Oracle's to_char
now. I hope that to_char's 3000 rows of source is without bugs, but
will good if anyone test it, for me it works very well :-)
Karel
----------------------------------------------------------------------
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
nonoverlap_sets() and is_subset() to list.c, where they should have lived
to begin with, and rename to nonoverlap_setsi and is_subseti since they
only work on integer lists.
extracting from an AND subclause just those opclauses that are relevant
for a particular index. For example, we can now consider using an index
on x to process WHERE (x = 1 AND y = 2) OR (x = 2 AND y = 4) OR ...
syscache and relcache flushes). Relcache entry rebuild now preserves
original tupledesc, rewrite rules, and triggers if possible, so that pointers
to these things remain valid --- if these things change while relcache entry
has positive refcount, we elog(ERROR) to avoid later crash. Arrange for
xact-local rels to be rebuilt when an SI inval message is seen for them,
so that they are updated by CommandCounterIncrement the same as regular rels.
(This is useful because of Hiroshi's recent changes to process our own SI
messages at CommandCounterIncrement time.) This allows simplification of
some routines that previously hacked around the lack of an automatic update.
catcache now keeps its own copy of tupledesc for its relation, rather than
depending on the relcache's copy; this avoids needing to reinitialize catcache
during a cache flush, which saves some cycles and eliminates nasty circularity
problems that occur if a cache flush happens while trying to initialize a
catcache.
Eliminate a number of permanent memory leaks that used to happen during
catcache or relcache flush; not least of which was that catcache never
freed any cached tuples! (Rule parsetree storage is still leaked, however;
will fix that separately.)
Nothing done yet about code that uses tuples retrieved by SearchSysCache
for longer than is safe.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
family functions. Contain:
conversion from a datetype to formatted text:
to_char( datetime, text)
to_char( timestamp, text)
to_char( int4, text)
to_char( int8, text)
to_char( float4, text)
to_char( float8, text)
to_char( numeric, text)
vice versa:
to_date ( text, text)
to_datetime ( text, text)
to_timestamp ( text, text)
to_number ( text, text) (convert to numeric)
PostgreSQL to_char is very compatible with Oracle's to_char(), but not
total exactly (now). Small differentions are in number formating. It will
fix in next to_char() version.
! If will this patch aplly to the main tree, must be delete the current
to_char version in contrib (directory "dateformat" and note in contrib's
README), this patch not erase it (sorry Bruce).
The patch patching files:
doc/src/sgml/func.sgml
^^^^^^^^
Hmm, I'm not sure if my English... :( Check it anyone (volunteer)?
Thomas, it is right? SGML is not my primary lang and compile
the current PG docs tree is very happy job (hard variables setting in
docs/sgml/Makefile --> HSTYLE= /home/users/t/thomas/.... :-)
What add any definition to global configure.in and set Makefiles in docs
tree via ./configure?
src/backend/utils/adt/Makefile
src/backend/utils/adt/formatting.c
src/include/catalog/pg_proc.h
src/include/utils/formatting.h
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
an attribute of a tuple previously fetched with SearchSysCacheTuple.
This avoids a lot of redundant cache lookups, particularly in selfuncs.c.
Also, remove SearchSysCacheStruct, which was unused and grotty.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
have the rl_completion_append_character variable. The tab completion
behavior doesn't seem to be quite perfect in that situation, but it's
better than failing to build at all...
from a constraint condition does not violate the constraint (cf. discussion
on pghackers 12/9/99). Implemented by adding a parameter to ExecQual,
specifying whether to return TRUE or FALSE when the qual result is
really NULL in three-valued boolean logic. Currently, ExecRelCheck is
the only caller that asks for TRUE, but if we find any other places that
have the wrong response to NULL, it'll be easy to fix them.
