Previously, we cached domain constraints for the life of a query, or
really for the life of the FmgrInfo struct that was used to invoke
domain_in() or domain_check(). But plpgsql (and probably other places)
are set up to cache such FmgrInfos for the whole lifespan of a session,
which meant they could be enforcing really stale sets of constraints.
On the other hand, searching pg_constraint once per query gets kind of
expensive too: testing says that as much as half the runtime of a
trivial query such as "SELECT 0::domaintype" went into that.
To fix this, delegate the responsibility for tracking a domain's
constraints to the typcache, which has the infrastructure needed to
detect syscache invalidation events that signal possible changes.
This not only removes unnecessary repeat reads of pg_constraint,
but ensures that we never apply stale constraint data: whatever we
use is the current data according to syscache rules.
Unfortunately, the current configuration of the system catalogs means
we have to flush cached domain-constraint data whenever either pg_type
or pg_constraint changes, which happens rather a lot (eg, creation or
deletion of a temp table will do it). It might be worth rearranging
things to split pg_constraint into two catalogs, of which the domain
constraint one would probably be very low-traffic. That's a job for
another patch though, and in any case this patch should improve matters
materially even with that handicap.
This patch makes use of the recently-added memory context reset callback
feature to manage the lifespan of domain constraint caches, so that we
don't risk deleting a cache that might be in the midst of evaluation.
Although this is a bug fix as well as a performance improvement, no
back-patch. There haven't been many if any field complaints about
stale domain constraint checks, so it doesn't seem worth taking the
risk of modifying data structures as basic as MemoryContexts in back
branches.
Part of the intent of the parameterized-path mechanism was to handle
star-schema queries efficiently, but some overly-restrictive search
limiting logic added in commit e2fa76d80b
prevented such cases from working as desired. Fix that and add a
regression test about it. Per gripe from Marc Cousin.
This is arguably a bug rather than a new feature, so back-patch to 9.2
where parameterized paths were introduced.
When a composite type being used in a typed table is modified by way
of ALTER TYPE, a table rewrite occurs appearing to come from ALTER TYPE.
The existing event_trigger.c code was unable to cope with that
and raised a spurious error. The fix is just to accept that command
tag for the event, and document this properly.
Noted while fooling with deparsing of DDL commands. This appears to be
an oversight in commit 618c9430a.
Thanks to Mark Wong for documentation wording help.
Commit ab14a73a6c raised an error in these cases and later the
behaviour was copied to jsonb. This is what the XML code, which we
then adopted, does, as the XSD types don't accept infinite values.
However, json dates and timestamps are just strings as far as json is
concerned, so there is no reason not to render these values as
'infinity'.
The json portion of this is backpatched to 9.4 where the behaviour was
introduced. The jsonb portion only affects the development branch.
Per gripe on pgsql-general.
"RETURN SQLERRM" prompted plpgsql_exec_function() to read from freed
memory. Back-patch to 9.0 (all supported versions). Little code ran
between the premature free and the read, so non-assert builds are
unlikely to witness user-visible consequences.
The "simple" path for printing VALUES clauses doesn't work if we need
to attach nondefault column aliases, because there's noplace to do that
in the minimal VALUES() syntax. So modify get_simple_values_rte() to
detect nondefault aliases and treat that as a non-simple case. This
further exposes that the "non-simple" path never actually worked;
it didn't produce valid syntax. Fix that too. Per bug #12789 from
Curtis McEnroe, and analysis by Andrew Gierth.
Back-patch to all supported branches. Before 9.3, this also requires
back-patching the part of commit 092d7ded29
that created get_simple_values_rte() to begin with; inserting the extra
test into the old factorization of that logic would've been too messy.
There are a couple of places in our grammar that fail to be strict LALR(1),
by requiring more than a single token of lookahead to decide what to do.
Up to now we've dealt with that by using a filter between the lexer and
parser that merges adjacent tokens into one in the places where two tokens
of lookahead are necessary. But that creates a number of user-visible
anomalies, for instance that you can't name a CTE "ordinality" because
"WITH ordinality AS ..." triggers folding of WITH and ORDINALITY into one
token. I realized that there's a better way.
In this patch, we still do the lookahead basically as before, but we never
merge the second token into the first; we replace just the first token by
a special lookahead symbol when one of the lookahead pairs is seen.
This requires a couple extra productions in the grammar, but it involves
fewer special tokens, so that the grammar tables come out a bit smaller
than before. The filter logic is no slower than before, perhaps a bit
faster.
I also fixed the filter logic so that when backing up after a lookahead,
the current token's terminator is correctly restored; this eliminates some
weird behavior in error message issuance, as is shown by the one change in
existing regression test outputs.
I believe that this patch entirely eliminates odd behaviors caused by
lookahead for WITH. It doesn't really improve the situation for NULLS
followed by FIRST/LAST unfortunately: those sequences still act like a
reserved word, even though there are cases where they should be seen as two
ordinary identifiers, eg "SELECT nulls first FROM ...". I experimented
with additional grammar hacks but couldn't find any simple solution for
that. Still, this is better than before, and it seems much more likely
that we *could* somehow solve the NULLS case on the basis of this filter
behavior than the previous one.
This works by keeping a per-subtransaction record of the ins/upd/del
counters before the truncate, and then resetting them; this record is
useful to return to the previous state in case the truncate is rolled
back, either in a subtransaction or whole transaction. The state is
propagated upwards as subtransactions commit.
When the per-table data is sent to the stats collector, a flag indicates
to reset the live/dead counters to zero as well.
Catalog version bumped due to the change in pgstat format.
Author: Alexander Shulgin
Discussion: 1007.1207238291@sss.pgh.pa.us
Discussion: 548F7D38.2000401@BlueTreble.com
Reviewed-by: Álvaro Herrera, Jim Nasby
Per discussion, this could be useful for purposes such as programmatically
detecting a nonresponding stats collector. We already have the timestamp
anyway, it's just a matter of providing a SQL-accessible function to fetch
it.
Matt Kelly, reviewed by Jim Nasby
In commit bf7ca15875 I introduced an
assumption that an RTE referenced by a whole-row Var must have a valid eref
field. This is false for RTEs constructed by DoCopy, and there are other
places taking similar shortcuts. Perhaps we should make all those places
go through addRangeTableEntryForRelation or its siblings instead of having
ad-hoc logic, but the most reliable fix seems to be to make the new code in
ExecEvalWholeRowVar cope if there's no eref. We can reasonably assume that
there's no need to insert column aliases if no aliases were provided.
Add a regression test case covering this, and also verifying that a sane
column name is in fact available in this situation.
Although the known case only crashes in 9.4 and HEAD, it seems prudent to
back-patch the code change to 9.2, since all the ingredients for a similar
failure exist in the variant patch applied to 9.3 and 9.2.
Per report from Jean-Pierre Pelletier.
We've been trying to support \u0000 in JSON values since commit
78ed8e03c6, and have introduced increasingly worse hacks to try to
make it work, such as commit 0ad1a81632. However, it fundamentally
can't work in the way envisioned, because the stored representation looks
the same as for \\u0000 which is not the same thing at all. It's also
entirely bogus to output \u0000 when de-escaped output is called for.
The right way to do this would be to store an actual 0x00 byte, and then
throw error only if asked to produce de-escaped textual output. However,
getting to that point seems likely to take considerable work and may well
never be practical in the 9.4.x series.
To preserve our options for better behavior while getting rid of the nasty
side-effects of 0ad1a81632, revert that commit in toto and instead
throw error if \u0000 is used in a context where it needs to be de-escaped.
(These are the same contexts where non-ASCII Unicode escapes throw error
if the database encoding isn't UTF8, so this behavior is by no means
without precedent.)
In passing, make both the \u0000 case and the non-ASCII Unicode case report
ERRCODE_UNTRANSLATABLE_CHARACTER / "unsupported Unicode escape sequence"
rather than claiming there's something wrong with the input syntax.
Back-patch to 9.4, where we have to do something because 0ad1a81632
broke things for many cases having nothing to do with \u0000. 9.3 also has
bogus behavior, but only for that specific escape value, so given the lack
of field complaints it seems better to leave 9.3 alone.
calc_rangesel() failed outright when comparing range variables to empty
constant ranges with < or >=, as a result of missing cases in a switch.
It also produced a bogus estimate for > comparison to an empty range.
On top of that, the >= and > cases were mislabeled throughout. For
nonempty constant ranges, they managed to produce the right answers
anyway as a result of counterbalancing typos.
Also, default_range_selectivity() omitted cases for elem <@ range,
range &< range, and range &> range, so that rather dubious defaults
were applied for these operators.
In passing, rearrange the code in rangesel() so that the elem <@ range
case is handled in a less opaque fashion.
Report and patch by Emre Hasegeli, some additional work by me
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
In the union support proc, we were not checking the hasnulls flag of
value A early enough, so it could be skipped if the "allnulls" flag in
value B is set. Also, a check on the allnulls flag of value "B" was
redundant, so remove it.
Also change inet_minmax_ops to not be the default opclass for type inet,
as a future inclusion operator class would be more useful and it's
pretty difficult to change default opclass for a datatype later on.
(There is no catversion bump for this catalog change; this shouldn't be
a problem.)
Extracted from a larger patch to add an "inclusion" operator class.
Author: Emre Hasegeli
Up to now, EXPLAIN has contented itself with printing the sort expressions
in a Sort or Merge Append plan node. This patch improves that by
annotating the sort keys with COLLATE, DESC, USING, and/or NULLS FIRST/LAST
whenever nondefault sort ordering options are used. The output is now a
reasonably close approximation of an ORDER BY clause equivalent to the
plan's ordering.
Marius Timmer, Lukas Kreft, and Arne Scheffer; reviewed by Mike Blackwell.
Some additional hacking by me.
I noticed the "vacuum" regression test taking really significantly longer
than it used to on a slow machine. Investigation pointed the finger at
commit e415b469b3, which added creation of
an index using an extremely expensive index function. That function was
evidently meant to be applied only twice ... but the test re-used an
existing test table, which up till a couple lines before that had had over
two thousand rows. Depending on timing of the concurrent regression tests,
the intervening VACUUMs might have been unable to remove those
recently-dead rows, and then the index build would need to create index
entries for them too, leading to the wrap_do_analyze() function being
executed 2000+ times not twice. Avoid this by using a different table
that is guaranteed to have only the intended two rows in it.
Back-patch to 9.0, like the commit that created the problem.
The event trigger test for rowsecurity can cause problems for other
tests which are run in parallel with it. Instead of running that test
in the rowsecurity set, move it to the event_trigger set, which runs
isolated from other tests.
Also reverts 7161b08, which moved rowsecurity into its own test group.
That's no longer necessary, now that the event trigger test is gone from
the rowsecurity set of tests.
Pointed out by Tom.
vacuum()'s static variable handling makes it non-reentrant; an ensuing
null pointer deference crashed the backend. Back-patch to 9.0 (all
supported versions).
Previously, the xml value resulting from an xpath query would not have
namespace declarations if the namespace declarations were attached to
an ancestor element in the input xml value. That means the output value
was not correct XML. Fix that by running the result value through
xmlCopyNode(), which produces the correct namespace declarations.
Author: Ali Akbar <the.apaan@gmail.com>
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
This function returns object type and objname/objargs arrays, which can
be passed to pg_get_object_address. This is especially useful because
the textual representation can be copied to a remote server in order to
obtain the corresponding OID-based address. In essence, this function
is the inverse of recently added pg_get_object_address().
Catalog version bumped due to the addition of the new function.
Also add docs to pg_get_object_address.
In COMMENT, DROP, SECURITY LABEL, and the new pg_get_object_address
function, we were representing types as a list of names, same as other
objects; but types are special objects that require their own
representation to be totally accurate. In the original COMMENT code we
had a note about fixing it which was lost in the course of c10575ff00.
Change all those places to use TypeName instead, as suggested by that
comment.
Right now the original coding doesn't cause any bugs, so no backpatch.
It is more problematic for proposed future code that operate with object
addresses from the SQL interface; type details such as array-ness are
lost when working with the degraded representation.
Thanks to Petr Jelínek and Dimitri Fontaine for offlist help on finding
a solution to a shift/reduce grammar conflict.
It is causing trouble when run in parallel mode, because dropping the
function other sessions are running concurrently causes them to fail due
to inability to find the function.
Per buildfarm, as noted by Tom Lane.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
Add "normal" and "original" flags as output columns to the
pg_event_trigger_dropped_objects() function. With this it's possible to
distinguish which objects, among those listed, need to be explicitely
referenced when trying to replicate a deletion.
This is necessary so that the list of objects can be pruned to the
minimum necessary to replicate the DROP command in a remote server that
might have slightly different schema (for instance, TOAST tables and
constraints with different names and such.)
Catalog version bumped due to change of function definition.
Reviewed by: Abhijit Menon-Sen, Stephen Frost, Heikki Linnakangas,
Robert Haas.
In generate_series_step_numeric(), the variables "start_num"
and "stop_num" may be potentially freed until the next call.
So they should be put in the location which can survive across calls.
But previously they were not, and which could cause incorrect
behavior of generate_series(numeric, numeric). This commit fixes
this problem by copying them on multi_call_memory_ctx.
Andrew Gierth
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
The code for advancing through the input rows overlooked the case that we
might already be past the first row of the row pair now being considered,
in case the previous percentile also fell between the same two input rows.
Report and patch by Andrew Gierth; logic rewritten a bit for clarity by me.
The planner seems to like to do this join query as a hash join, making
the output ordering machine-dependent; worse, it's a hash on OIDs, so
that it's a bit astonishing that the result doesn't change from run to
run even on one machine. Add an ORDER BY to get consistent results.
Per buildfarm.
I also suppressed output from the final DROP SCHEMA CASCADE, to avoid
occasional failures similar to those fixed in commit 81d815dc3e.
That hasn't been observed in the buildfarm yet, but it seems likely
to happen in future if we leave it as-is.
The functions are:
to_jsonb()
jsonb_object()
jsonb_build_object()
jsonb_build_array()
jsonb_agg()
jsonb_object_agg()
Also along the way some better logic is implemented in
json_categorize_type() to match that in the newly implemented
jsonb_categorize_type().
Andrew Dunstan, reviewed by Pavel Stehule and Alvaro Herrera.
The functions remove object fields, including in nested objects, that
have null as a value. In certain cases this can lead to considerably
smaller datums, with no loss of semantic information.
Andrew Dunstan, reviewed by Pavel Stehule.
Ensure we reindex indexes built on Mat Views.
Based on patch from Micheal Paquier
Add thorough tests to check that indexes on
tables, toast tables and mat views are reindexed.
Simon Riggs
Aside from not testing the case it claimed to test (namely a permissions
failure), it left a login-capable role lying around, which quite aside
from possibly being a security hole would cause subsequent regression runs
to fail since the role would already exist.
Generate a table_rewrite event when ALTER TABLE
attempts to rewrite a table. Provide helper
functions to identify table and reason.
Intended use case is to help assess or to react
to schema changes that might hold exclusive locks
for long periods.
Dimitri Fontaine, triggering an edit by Simon Riggs
Reviewed in detail by Michael Paquier
Rather than have the core security_label regression test depend on the
dummy_seclabel module, have that part of the test be executed by
dummy_seclabel itself directly. This simplifies the testing rig a bit;
in particular it should silence the problems from the MSVC buildfarm
phylum, which haven't yet gotten taught how to install src/test/modules.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
Add a bit of context sensitivity to plpgsql_yylex() so that it can
recognize when the word it is looking at is the first word of a new
statement, and if so whether it is the target of an assignment statement.
When we are at start of statement and it's not an assignment, we can
prefer recognizing unreserved keywords over recognizing variable names,
thereby allowing most statements' initial keywords to be demoted from
reserved to unreserved status. This is rather useful already (there are
15 such words that get demoted here), and what's more to the point is
that future patches proposing to add new plpgsql statements can avoid
objections about having to add new reserved words.
The keywords BEGIN, DECLARE, FOR, FOREACH, LOOP, WHILE need to remain
reserved because they can be preceded by block labels, and the logic
added here doesn't understand about block labels. In principle we
could probably fix that, but it would take more than one token of
lookback and the benefit doesn't seem worth extra complexity.
Also note I didn't de-reserve EXECUTE, because it is used in more places
than just statement start. It's possible it could be de-reserved with
more work, but that would be an independent fix.
In passing, also de-reserve COLLATE and DEFAULT, which shouldn't have
been reserved in the first place since they only need to be recognized
within DECLARE sections.
These cases formerly failed with errors about "could not find array type
for data type". Now they yield arrays of the same element type and one
higher dimension.
The implementation involves creating functions with API similar to the
existing accumArrayResult() family. I (tgl) also extended the base family
by adding an initArrayResult() function, which allows callers to avoid
special-casing the zero-inputs case if they just want an empty array as
result. (Not all do, so the previous calling convention remains valid.)
This allowed simplifying some existing code in xml.c and plperl.c.
Ali Akbar, reviewed by Pavel Stehule, significantly modified by me
In the regression tests, when doing cascaded drops, we need to suppress
the notices from DROP CASCADE or there can be transient regression
failures as the order of drops can depend on the physical row order in
pg_depend.
Report and fix suggestion from Tom.
The locution "EXISTS(SELECT ... LIMIT 1)" seems to be rather common among
people who don't realize that the database already performs optimizations
equivalent to putting LIMIT 1 in the sub-select. Unfortunately, this was
actually making things worse, because it prevented us from optimizing such
EXISTS clauses into semi or anti joins. Teach simplify_EXISTS_query() to
suppress constant-positive LIMIT clauses. That fixes the semi/anti-join
case, and may help marginally even for cases that have to be left as
sub-SELECTs.
Marti Raudsepp, reviewed by David Rowley
That includes VACUUM on GIN, GiST and SP-GiST indexes, and B-tree indexes
large enough to cause page deletions in B-tree. Plus some other special
cases.
After this patch, the regression tests generate all different WAL record
types. Not all branches within the redo functions are covered, but it's a
step forward.
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
Per complaint from Tom.
While at it, throw in some extra tests for nulls as well, and make sure
that the set of data we insert on the second round is not identical to
the first one. Both measures are intended to improve coverage of the
test.
Also uncomment the ON COMMIT DROP clause on the CREATE TEMP TABLE
commands. This doesn't have any effect for someone examining the
regression database after the tests are done, but it reduces clutter for
those that execute the script directly.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
This is a followup to commit 43ac12c6e6,
which added regression tests checking that I/O functions of built-in
types are not marked volatile. Complaining in CREATE TYPE should push
developers of add-on types to fix any misdeclared functions in their
types. It's just a warning not an error, to avoid creating upgrade
problems for what might be just cosmetic mis-markings.
Aside from adding the warning code, fix a number of types that were
sloppily created in the regression tests.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f757), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
We have a project policy that I/O functions must not be volatile, as per
commit aab353a60b, but we weren't doing
anything to enforce that. In most usage the marking of the function
doesn't matter as long as its behavior is sane --- but I/O casts can
expose the marking as user-visible behavior, as per today's complaint
from Joe Van Dyk about contrib/ltree.
This test as such will only protect us against future errors in built-in
data types. To catch the same error in contrib or third-party types,
perhaps we should make CREATE TYPE complain? But that's a separate
issue from enforcing the policy for built-in types.
If an inline-able SQL function taking a composite argument is used in a
LATERAL subselect, and the composite argument is a lateral reference,
the planner could fail with "variable not found in subplan target list",
as seen in bug #11703 from Karl Bartel. (The outer function call used in
the bug report and in the committed regression test is not really necessary
to provoke the bug --- you can get it if you manually expand the outer
function into "LATERAL (SELECT inner_function(outer_relation))", too.)
The cause of this is that we generate the reltargetlist for the referenced
relation before doing eval_const_expressions() on the lateral sub-select's
expressions (cf find_lateral_references()), so what's scheduled to be
emitted by the referenced relation is a whole-row Var, not the simplified
single-column Var produced by optimizing the function's FieldSelect on the
whole-row Var. Then setrefs.c fails to match up that lateral reference to
what's available from the outer scan.
Preserving the FieldSelect optimization in such cases would require either
major planner restructuring (to recursively do expression simplification
on sub-selects much earlier) or some amazingly ugly kluge to change the
reltargetlist of a possibly-already-planned relation. It seems better
just to skip the optimization when the Var is from an upper query level;
the case is not so common that it's likely anyone will notice a few
wasted cycles.
AFAICT this problem only occurs for uplevel LATERAL references, so
back-patch to 9.3 where LATERAL was added.
interval precision can only be specified after the "interval" keyword if
no units are specified.
Previously we incorrectly checked the units to see if the precision was
legal, causing confusion.
Report by Alvaro Herrera
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
When determining whether one JSONB object contains another, it's okay to
make a quick exit if the first object has fewer pairs than the second:
because we de-duplicate keys within objects, it is impossible that the
first object has all the keys the second does. However, the code was
applying this rule to JSONB arrays as well, where it does *not* hold
because arrays can contain duplicate entries. The test was really in
the wrong place anyway; we should do it within JsonbDeepContains, where
it can be applied to nested objects not only top-level ones.
Report and test cases by Alexander Korotkov; fix by Peter Geoghegan and
Tom Lane.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
Per discussion, revert the commit which added 'ignore_nulls' to
row_to_json. This capability would be better added as an independent
function rather than being bolted on to row_to_json. Additionally,
the implementation didn't address complex JSON objects, and so was
incomplete anyway.
Pointed out by Tom and discussed with Andrew and Robert.
Andres pointed out that there was an extra ';' in equalPolicies, which
made me realize that my prior testing with CLOBBER_CACHE_ALWAYS was
insufficient (it didn't always catch the issue, just most of the time).
Thanks to that, a different issue was discovered, specifically in
equalRSDescs. This change corrects eqaulRSDescs to return 'true' once
all policies have been confirmed logically identical. After stepping
through both functions to ensure correct behavior, I ran this for
about 12 hours of CLOBBER_CACHE_ALWAYS runs of the regression tests
with no failures.
In addition, correct a few typos in the documentation which were pointed
out by Thom Brown (thanks!) and improve the policy documentation further
by adding a flushed out usage example based on a unix passwd file.
Lastly, clean up a few comments in the regression tests and pg_dump.h.
Several upcoming performance/scalability improvements require atomic
operations. This new API avoids the need to splatter compiler and
architecture dependent code over all the locations employing atomic
ops.
For several of the potential usages it'd be problematic to maintain
both, a atomics using implementation and one using spinlocks or
similar. In all likelihood one of the implementations would not get
tested regularly under concurrency. To avoid that scenario the new API
provides a automatic fallback of atomic operations to spinlocks. All
properties of atomic operations are maintained. This fallback -
obviously - isn't as fast as just using atomic ops, but it's not bad
either. For one of the future users the atomics ontop spinlocks
implementation was actually slightly faster than the old purely
spinlock using implementation. That's important because it reduces the
fear of regressing older platforms when improving the scalability for
new ones.
The API, loosely modeled after the C11 atomics support, currently
provides 'atomic flags' and 32 bit unsigned integers. If the platform
efficiently supports atomic 64 bit unsigned integers those are also
provided.
To implement atomics support for a platform/architecture/compiler for
a type of atomics 32bit compare and exchange needs to be
implemented. If available and more efficient native support for flags,
32 bit atomic addition, and corresponding 64 bit operations may also
be provided. Additional useful atomic operations are implemented
generically ontop of these.
The implementation for various versions of gcc, msvc and sun studio have
been tested. Additional existing stub implementations for
* Intel icc
* HUPX acc
* IBM xlc
are included but have never been tested. These will likely require
fixes based on buildfarm and user feedback.
As atomic operations also require barriers for some operations the
existing barrier support has been moved into the atomics code.
Author: Andres Freund with contributions from Oskari Saarenmaa
Reviewed-By: Amit Kapila, Robert Haas, Heikki Linnakangas and Álvaro Herrera
Discussion: CA+TgmoYBW+ux5-8Ja=Mcyuy8=VXAnVRHp3Kess6Pn3DMXAPAEA@mail.gmail.com,
20131015123303.GH5300@awork2.anarazel.de,
20131028205522.GI20248@awork2.anarazel.de
When the number of allowed iterations is limited (either a "?" quantifier
or a bound expression), the last sub-match has to reach to the end of the
target string. The previous coding here first tried the shortest possible
match (one character, usually) and then gave up and back-tracked if that
didn't work, typically leading to failure to match overall, as shown in
bug #11478 from Christoph Berg. The minimum change to fix that would be to
not decrement k before "goto backtrack"; but that would be a pretty stupid
solution, because we'd laboriously try each possible sub-match length
before finally discovering that only ending at the end can work. Instead,
force the sub-match endpoint limit up to the end for even the first
shortest() call if we cannot have any more sub-matches after this one.
Bug introduced in my rewrite that added the iterdissect logic, commit
173e29aa5d. The shortest-first search code
was too closely modeled on the longest-first code, which hasn't got this
issue since it tries a match reaching to the end to start with anyway.
Back-patch to all affected branches.
While withCheckOption exprs had been handled in many cases by
happenstance, they need to be handled during set_plan_references and
more specifically down in set_plan_refs for ModifyTable plan nodes.
This is to ensure that the opfuncid's are set for operators referenced
in the withCheckOption exprs.
Identified as an issue by Thom Brown
Patch by Dean Rasheed
Back-patch to 9.4, where withCheckOption was introduced.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
Provide an option to skip NULL values in a row when generating a JSON
object from that row with row_to_json. This can reduce the size of the
JSON object in cases where columns are NULL without really reducing the
information in the JSON object.
This also makes row_to_json into a single function with default values,
rather than having multiple functions. In passing, change array_to_json
to also be a single function with default values (we don't add an
'ignore_nulls' option yet- it's not clear that there is a sensible
use-case there, and it hasn't been asked for in any case).
Pavel Stehule
The code I added in commit f343a880d5 was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
This provides a convenient method of classifying input values into buckets
that are not necessarily equal-width. It works on any sortable data type.
The choice of function name is a bit debatable, perhaps, but showing that
there's a relationship to the SQL standard's width_bucket() function seems
more attractive than the other proposals.
Petr Jelinek, reviewed by Pavel Stehule
The xml type previously rejected "content" that is empty or consists
only of spaces. But the SQL/XML standard allows that, so change that.
The accepted values for XML "documents" are not changed.
Reviewed-by: Ali Akbar <the.apaan@gmail.com>
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
This reverts commit e23014f3d4.
As the side effect of the reverted commit, when the unit is
specified, the reloption was stored in the catalog with the unit.
This broke pg_dump (specifically, it prevented pg_dump from
outputting restorable backup regarding the reloption) and
turned the buildfarm red. Revert the commit until the fixed
version is ready.
This introduces an infrastructure which allows us to specify the units
like ms (milliseconds) in integer relation option, like GUC parameter.
Currently only autovacuum_vacuum_cost_delay reloption can accept
the units.
Reviewed by Michael Paquier
Use SECURITY_LOCAL_USERID_CHANGE while building temporary tables;
only escalate to SECURITY_RESTRICTED_OPERATION while potentially
running user-supplied code. The more secure mode was preventing
temp table creation. Add regression tests to cover this problem.
This fixes Bug #11208 reported by Bruno Emanuel de Andrade Silva.
Backpatch to 9.4, where the bug was introduced.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
Cover some cases I omitted before, such as null and empty-string
elements in the path array. This exposes another inconsistency:
json_extract_path complains about empty path elements but
jsonb_extract_path does not.
jsonb's #> operator segfaulted (dereferencing a null pointer) if the RHS
was a zero-length array, as reported in bug #11207 from Justin Van Winkle.
json's #> operator returns NULL in such cases, so for the moment let's
make jsonb act likewise.
Also add a bunch of regression test queries memorializing the -> and #>
operators' behavior for this and other corner cases.
There is a good argument for changing some of these behaviors, as they
are not very consistent with each other, and throwing an error isn't
necessarily a desirable behavior for operators that are likely to be
used in indexes. However, everybody can agree that a core dump is the
Wrong Thing, and we need test cases even if we decide to change their
expected output later.
Make lists of the names of all operators that are claimed to be commutator
pairs or negator pairs. This is analogous to the existing queries that
make lists of all operator names appearing in particular opclass strategy
slots. Unexpected additions to these lists are likely to be mistakes; had
we had these queries in place before, bug #11178 might've been prevented.
When a view has a function-returning-composite in FROM, and there are
some dropped columns in the underlying composite type, ruleutils.c
printed junk in the column alias list for the reconstructed FROM entry.
Before 9.3, this was prevented by doing get_rte_attribute_is_dropped
tests while printing the column alias list; but that solution is not
currently available to us for reasons I'll explain below. Instead,
check for empty-string entries in the alias list, which can only exist
if that column position had been dropped at the time the view was made.
(The parser fills in empty strings to preserve the invariant that the
aliases correspond to physical column positions.)
While this is sufficient to handle the case of columns dropped before
the view was made, we have still got issues with columns dropped after
the view was made. In particular, the view could contain Vars that
explicitly reference such columns! The dependency machinery really
ought to refuse the column drop attempt in such cases, as it would do
when trying to drop a table column that's explicitly referenced in
views. However, we currently neglect to store dependencies on columns
of composite types, and fixing that is likely to be too big to be
back-patchable (not to mention that existing views in existing databases
would not have the needed pg_depend entries anyway). So I'll leave that
for a separate patch.
Pre-9.3, ruleutils would print such Vars normally (with their original
column names) even though it suppressed their entries in the RTE's
column alias list. This is certainly bogus, since the printed view
definition would fail to reload, but at least it didn't crash. However,
as of 9.3 the printed column alias list is tightly tied to the names
printed for Vars; so we can't treat columns as dropped for one purpose
and not dropped for the other. This is why we can't just put back the
get_rte_attribute_is_dropped test: it results in an assertion failure
if the view in fact contains any Vars referencing the dropped column.
Once we've got dependencies preventing such cases, we'll probably want
to do it that way instead of relying on the empty-string test used here.
This fix turned up a very ancient bug in outfuncs/readfuncs, namely
that T_String nodes containing empty strings were not dumped/reloaded
correctly: the node was printed as "<>" which is read as a string
value of <>. Since (per SQL) we disallow empty-string identifiers,
such nodes don't occur normally, which is why we'd not noticed.
(Such nodes aren't used for literal constants, just identifiers.)
Per report from Marc Schablewski. Back-patch to 9.3 which is where
the rule printing behavior changed. The dangling-variable case is
broken all the way back, but that's not what his complaint is about.
We can remove a left join to a relation if the relation's output is
provably distinct for the columns involved in the join clause (considering
only equijoin clauses) and the relation supplies no variables needed above
the join. Previously, the join removal logic could only prove distinctness
by reference to unique indexes of a table. This patch extends the logic
to consider subquery relations, wherein distinctness might be proven by
reference to GROUP BY, DISTINCT, etc.
We actually already had some code to check that a subquery's output was
provably distinct, but it was hidden inside pathnode.c; which was a pretty
bad place for it really, since that file is mostly boilerplate Path
construction and comparison. Move that code to analyzejoins.c, which is
arguably a more appropriate location, and is certainly the site of the
new usage for it.
David Rowley, reviewed by Simon Riggs
ExecEvalWholeRowVar incorrectly supposed that it could "bless" the source
TupleTableSlot just once per query. But if the input is coming from an
Append (or, perhaps, other cases?) more than one slot might be returned
over the query run. This led to "record type has not been registered"
errors when a composite datum was extracted from a non-blessed slot.
This bug has been there a long time; I guess it escaped notice because when
dealing with subqueries the planner tends to expand whole-row Vars into
RowExprs, which don't have the same problem. It is possible to trigger
the problem in all active branches, though, as illustrated by the added
regression test.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
While the x output of "select x from t group by x" can be presumed unique,
this does not hold for "select x, generate_series(1,10) from t group by x",
because we may expand the set-returning function after the grouping step.
(Perhaps that should be re-thought; but considering all the other oddities
involved with SRFs in targetlists, it seems unlikely we'll change it.)
Put a check in query_is_distinct_for() so it's not fooled by such cases.
Back-patch to all supported branches.
David Rowley
The "false" case was really quite useless since all it did was to throw
an error; a definition not helped in the least by making it the default.
Instead let's just have the "true" case, which emits nested objects and
arrays in JSON syntax. We might later want to provide the ability to
emit sub-objects in Postgres record or array syntax, but we'd be best off
to drive that off a check of the target field datatype, not a separate
argument.
For the functions newly added in 9.4, we can just remove the flag arguments
outright. We can't do that for json_populate_record[set], which already
existed in 9.3, but we can ignore the argument and always behave as if it
were "true". It helps that the flag arguments were optional and not
documented in any useful fashion anyway.
We can allow this even without any specific knowledge of the semantics
of the window function, so long as pushed-down quals will either accept
every row in a given window partition, or reject every such row. Because
window functions act only within a partition, such a case can't result
in changing the window functions' outputs for any surviving row.
Eliminating entire partitions in this way obviously can reduce the cost
of the window-function computations substantially.
The fly in the ointment is that it's hard to be entirely sure whether
this is true for an arbitrary qual condition. This patch allows pushdown
if (a) the qual references only partitioning columns, and (b) the qual
contains no volatile functions. We are at risk of incorrect results if
the qual can produce different answers for values that the partitioning
equality operator sees as equal. While it's not hard to invent cases
for which that can happen, it seems to seldom be a problem in practice,
since no one has complained about a similar assumption that we've had
for many years with respect to DISTINCT. The potential performance
gains seem to be worth the risk.
David Rowley, reviewed by Vik Fearing; some credit is due also to
Thomas Mayer who did considerable preliminary investigation.
A WHERE clause applied to the output of a subquery with DISTINCT should
theoretically be applied only once per distinct row; but if we push it
into the subquery then it will be evaluated at each row before duplicate
elimination occurs. If the qual is volatile this can give rise to
observably wrong results, so don't do that.
While at it, refactor a little bit to allow subquery_is_pushdown_safe
to report more than one kind of restrictive condition without indefinitely
expanding its argument list.
Although this is a bug fix, it seems unwise to back-patch it into released
branches, since it might de-optimize plans for queries that aren't giving
any trouble in practice. So apply to 9.4 but not further back.
Commit a87c729153 already fixed the bug this
is checking for, but the regression test case it added didn't cover this
scenario. Since we managed to miss the fact that there was a bug at all,
it seems like a good idea to propagate the extra test case forward to HEAD.
populate_recordset_object_start() improperly created a new hash table
(overwriting the link to the existing one) if called at nest levels
greater than one. This resulted in previous fields not appearing in
the final output, as reported by Matti Hameister in bug #10728.
In 9.4 the problem also affects json_to_recordset.
This perhaps missed detection earlier because the default behavior is to
throw an error for nested objects: you have to pass use_json_as_text = true
to see the problem.
In addition, fix query-lifespan leakage of the hashtable created by
json_populate_record(). This is pretty much the same problem recently
fixed in dblink: creating an intended-to-be-temporary context underneath
the executor's per-tuple context isn't enough to make it go away at the
end of the tuple cycle, because MemoryContextReset is not
MemoryContextResetAndDeleteChildren.
Michael Paquier and Tom Lane
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Memorialize the expected output of the query that libpq has been using for
many years to get the OIDs of large-object support functions. Although
we really ought to change the way libpq does this, we must expect that
this query will remain in use in the field for the foreseeable future,
so until we're ready to break compatibility with old libpq versions
we'd better check the results stay the same. See the recent lo_create()
fiasco.
Although this bug is already fixed in post-9.2 branches, the case
triggering it is quite different from what was under consideration
at the time. It seems worth memorializing this example in HEAD
just to make sure it doesn't get broken again in future.
Extracted from commit 187ae17300.
The original location in create_function_3.sql didn't invite the close
structinity warranted for adding new leakproof functions. Add comments
to the test explaining that functions should only be added after
careful consideration and understanding what a leakproof function is.
Per complaint from Tom Lane after 5eebb8d954.
Buildfarm says we get different plans on 32-bit and 64-bit platforms,
probably because of MAXALIGN-related differences in memory-consumption
calculations. Add some dummy WHERE clauses so that the planner estimates
different sizes for the three generate_series() relations; that should
stabilize the choice of join order.
This is needed to allow ORDER BY, DISTINCT, etc to work as expected for
pg_lsn values.
We had previously decided to put this off for 9.5, but in view of commit
eeca4cd35e there's no reason to avoid a
catversion bump for 9.4beta2, and this does make a pretty significant
usability difference for pg_lsn.
Michael Paquier, with fixes from Andres Freund and Tom Lane
Previously, any backslash in text being escaped for JSON was doubled so
that the result was still valid JSON. However, this led to some perverse
results in the case of Unicode sequences, These are now detected and the
initial backslash is no longer escaped. All other backslashes are
still escaped. No validity check is performed, all that is looked for is
\uXXXX where X is a hexidecimal digit.
This is a change from the 9.2 and 9.3 behaviour as noted in the Release
notes.
Per complaint from Teodor Sigaev.
Many JSON processors require timestamp strings in ISO 8601 format in
order to convert the strings. When converting a timestamp, with or
without timezone, to a JSON datum we therefore now use such a format
rather than the type's default text output, in functions such as
to_json().
This is a change in behaviour from 9.2 and 9.3, as noted in the release
notes.
Use the unaligned/no rowcount output mode in a regression tests that
shows all built-in leakproof functions. Currently a new leakproof
function will often change the alignment of all existing functions,
making it hard to see the actual difference and creating unnecessary
patch conflicts.
Noticed while looking over a patch introducing new leakproof functions.
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
America/Metlakatla hasn't been in the IANA database all that long, so
some installations might not have it. It does seem worthwhile to test
with a fractional-minute GMT offset, but we can get that from almost
any pre-1900 date; I chose Europe/Paris, whose LMT offset from Greenwich
should be pretty darn well established.
Also, assuming that Mars/Mons_Olympus will never be in the IANA database
seems less than future-proof, so let's use a more fanciful location for
the bad-zone-name check.
Per complaint from Christoph Berg.
There's no longer much pressure to switch the default GIN opclass for
jsonb, but there was still some unhappiness with the name "jsonb_hash_ops",
since hashing is no longer a distinguishing property of that opclass,
and anyway it seems like a relatively minor detail. At the suggestion of
Heikki Linnakangas, we'll use "jsonb_path_ops" instead; that captures the
important characteristic that each index entry depends on the entire path
from the document root to the indexed value.
Also add a user-facing explanation of the implementation properties of
these two opclasses.
Change the key representation so that values that would exceed 127 bytes
are hashed into short strings, and so that the original JSON datatype of
each value is recorded in the index. The hashing rule eliminates the major
objection to having this opclass be the default for jsonb, namely that it
could fail for plausible input data (due to GIN's restrictions on maximum
key length). Preserving datatype information doesn't really buy us much
right now, but it requires no extra space compared to the previous way,
and it might be useful later.
Also, change the consistency-checking functions to request recheck for
exists (jsonb ? text) and related operators. The original analysis that
this is an exactly checkable query was incorrect, since the index does
not preserve information about whether a key appears at top level in
the indexed JSON object. Add a test case demonstrating the problem.
Make some other, mostly cosmetic improvements to the code in jsonb_gin.c
as well.
catversion bump due to on-disk data format change in jsonb_ops indexes.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
ActiveSnapshot needs to be set when we call ExecutorRewind because some
plan node types may execute user-defined functions during their ReScan
calls (nodeLimit.c does so, at least). The wisdom of that is somewhat
debatable, perhaps, but for now the simplest fix is to make sure the
required context is valid. Failure to do this typically led to a
null-pointer-dereference core dump, though it's possible that in more
complex cases a function could be executed with the wrong snapshot
leading to very subtle misbehavior.
Per report from Leif Jensen. It's been broken for a long time, so
back-patch to all active branches.
Commit 4318daecc9 introduced a test that
couldn't be made consistent between integer and floating-point
timestamps.
It was designed to test the longest possible interval output length,
so removing four zeros from the number of hours, as this patch does,
is not ideal. But the test still has some utility for its original
purpose, and there aren't a lot of other good options.
Noah Misch suggested a different approach where we test that the
output either matches what we expect from integer timestamps or what
we expect from floating-point timestamps. That seemed to obscure an
otherwise simple test, however.
Reviewed by Tom Lane and Noah Misch.
ruleutils.c tries to cope with additions/deletions/renamings of columns in
tables referenced by views, by means of adding machine-generated aliases to
the printed form of a view when needed to preserve the original semantics.
A recent blog post by Marko Tiikkaja pointed out a case I'd missed though:
if one input of a join with USING is itself a join, there is nothing to
stop the user from adding a column of the same name as the USING column to
whichever side of the sub-join didn't provide the USING column. And then
there'll be an error when the view is re-parsed, since now the sub-join
exposes two columns matching the USING specification. We were catching a
lot of related cases, but not this one, so add some logic to cope with it.
Back-patch to 9.3, which is the first release that makes any serious
attempt to cope with such cases (cf commit 2ffa740be and follow-ons).
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
In general we can't discard constant-NULL inputs, since they could change
the result of the AND/OR to be NULL. But at top level of WHERE, we do not
need to distinguish a NULL result from a FALSE result, so it's okay to
treat NULL as FALSE and then simplify AND/OR accordingly.
This is a very ancient oversight, but in 9.2 and later it can lead to
failure to optimize queries that previous releases did optimize, as a
result of more aggressive parameter substitution rules making it possible
to reduce more subexpressions to NULL constants. This is the root cause of
bug #10171 from Arnold Scheffler. We could alternatively have fixed that
by teaching orclauses.c to ignore constant-NULL OR arms, but it seems
better to get rid of them globally.
I resisted the temptation to back-patch this change into all active
branches, but it seems appropriate to back-patch as far as 9.2 so that
there will not be performance regressions of the kind shown in this bug.
feasible to display tables that have both many columns and some large
data in some columns (such as pg_stats).
Emre Hasegeli with review and rewriting from Sergey Muraviov and
reviewed by Greg Stark
pg_sequence_parameters() and pg_identify_object() have had incorrect
proallargtypes entries since 9.1 and 9.3 respectively. This was mostly
masked by the correct information in proargtypes, but a few operations
such as pg_get_function_arguments() (and thus psql's \df display) would
show the wrong data types for these functions' input parameters.
In HEAD, fix the wrong info, bump catversion, and add an opr_sanity
regression test to catch future mistakes of this sort.
In the back branches, just fix the wrong info so that installations
initdb'd with future minor releases will have the right data. We
can't force an initdb, and it doesn't seem like a good idea to add
a regression test that will fail on existing installations.
Andres Freund
Before 9.4, such an aggregate couldn't be declared, because its final
function would have to have polymorphic result type but no polymorphic
argument, which CREATE FUNCTION would quite properly reject. The
ordered-set-aggregate patch found a workaround: allow the final function
to be declared as accepting additional dummy arguments that have types
matching the aggregate's regular input arguments. However, we failed
to notice that this problem applies just as much to regular aggregates,
despite the fact that we had a built-in regular aggregate array_agg()
that was known to be undeclarable in SQL because its final function
had an illegal signature. So what we should have done, and what this
patch does, is to decouple the extra-dummy-arguments behavior from
ordered-set aggregates and make it generally available for all aggregate
declarations. We have to put this into 9.4 rather than waiting till
later because it slightly alters the rules for declaring ordered-set
aggregates.
The patch turned out a bit bigger than I'd hoped because it proved
necessary to record the extra-arguments option in a new pg_aggregate
column. I'd thought we could just look at the final function's pronargs
at runtime, but that didn't work well for variadic final functions.
It's probably just as well though, because it simplifies life for pg_dump
to record the option explicitly.
While at it, fix array_agg() to have a valid final-function signature,
and add an opr_sanity test to notice future deviations from polymorphic
consistency. I also marked the percentile_cont() aggregates as not
needing extra arguments, since they don't.
Now that we're pretty much feature-frozen, it's time to update the checks
on system catalog foreign-key references.
(It looks like we missed doing this altogether for 9.3. Sigh.)
These are natural complements to the functions added by commit
0886fc6a5c, but they weren't included
in the original patch for some reason. Add them.
Patch by me, per a complaint by Tom Lane. Review by Tatsuo
Ishii.
In psql \d+, display oids only when they exist, and display replication
identity only when it is non-default. Also document the defaults for
replication identity for system and non-system tables. Update
regression output.
Looks like we can end up with different plans happening on the
buildfarm, which breaks the regression tests when we include
EXPLAIN output (which is done in the regression tests for
updatable security views, to ensure that the user-defined
function isn't pushed down to a level where it could view the
rows before the security quals are applied).
This adds in ANALYZE to hopefully make the plans consistent.
The ANALYZE ends up changing the original plan too, so the
update looks bigger than it really is. The new plan looks
perfectly valid, of course.
Views which are marked as security_barrier must have their quals
applied before any user-defined quals are called, to prevent
user-defined functions from being able to see rows which the
security barrier view is intended to prevent them from seeing.
Remove the restriction on security barrier views being automatically
updatable by adding a new securityQuals list to the RTE structure
which keeps track of the quals from security barrier views at each
level, independently of the user-supplied quals. When RTEs are
later discovered which have securityQuals populated, they are turned
into subquery RTEs which are marked as security_barrier to prevent
any user-supplied quals being pushed down (modulo LEAKPROOF quals).
Dean Rasheed, reviewed by Craig Ringer, Simon Riggs, KaiGai Kohei
First installment of the promised moving-aggregate support in built-in
aggregates: count(), sum(), avg(), stddev() and variance() for
assorted datatypes, though not for float4/float8.
In passing, remove a 2001-vintage kluge in interval_accum(): interval
array elements have been properly aligned since around 2003, but
nobody remembered to take out this workaround. Also, fix a thinko
in the opr_sanity tests for moving-aggregate catalog entries.
David Rowley and Florian Pflug, reviewed by Dean Rasheed
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
This operator class can accelerate subnet/supernet tests as well as
btree-equivalent ordered comparisons. It also handles a new network
operator inet && inet (overlaps, a/k/a "is supernet or subnet of"),
which is expected to be useful in exclusion constraints.
Ideally this opclass would be the default for GiST with inet/cidr data,
but we can't mark it that way until we figure out how to do a more or
less graceful transition from the current situation, in which the
really-completely-bogus inet/cidr opclasses in contrib/btree_gist are
marked as default. Having the opclass in core and not default is better
than not having it at all, though.
While at it, add new documentation sections to allow us to officially
document GiST/GIN/SP-GiST opclasses, something there was never a clear
place to do before. I filled these in with some simple tables listing
the existing opclasses and the operators they support, but there's
certainly scope to put more information there.
Emre Hasegeli, reviewed by Andreas Karlsson, further hacking by me
These functions won't throw an error if the object doesn't exist,
or if (for functions and operators) there's more than one matching
object.
Yugo Nagata and Nozomi Anzai, reviewed by Amit Khandekar, Marti
Raudsepp, Amit Kapila, and me.
Infrastructure to allow
plpgsql.extra_warnings
plpgsql.extra_errors
Initial extra checks only for shadowed_variables
Marko Tiikkaja and Petr Jelinek
Reviewed by Simon Riggs and Pavel Stěhule
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
Also add a regression test for a GIN index with enough items with the same
key, so that a GIN posting tree gets created. Apparently none of the
existing GIN tests were large enough for that.
This code is new, no backpatching required.
The original coding of EquivalenceClasses didn't foresee that appendrel
child relations might themselves be appendrels; but this is possible for
example when a UNION ALL subquery scans a table with inheritance children.
The oversight led to failure to optimize ordering-related issues very well
for the grandchild tables. After some false starts involving explicitly
flattening the appendrel representation, we found that this could be fixed
easily by removing a few implicit assumptions about appendrel parent rels
not being children themselves.
Kyotaro Horiguchi and Tom Lane, reviewed by Noah Misch
Set function parameter names and defaults. Add jsonb versions (which the
code already provided for so the actual new code is trivial). Add jsonb
regression tests and docs.
Bump catalog version (which I apparently forgot to do when jsonb was
committed).
The new format accepts exactly the same data as the json type. However, it is
stored in a format that does not require reparsing the orgiginal text in order
to process it, making it much more suitable for indexing and other operations.
Insignificant whitespace is discarded, and the order of object keys is not
preserved. Neither are duplicate object keys kept - the later value for a given
key is the only one stored.
The new type has all the functions and operators that the json type has,
with the exception of the json generation functions (to_json, json_agg etc.)
and with identical semantics. In addition, there are operator classes for
hash and btree indexing, and two classes for GIN indexing, that have no
equivalent in the json type.
This feature grew out of previous work by Oleg Bartunov and Teodor Sigaev, which
was intended to provide similar facilities to a nested hstore type, but which
in the end proved to have some significant compatibility issues.
Authors: Oleg Bartunov, Teodor Sigaev, Peter Geoghegan and Andrew Dunstan.
Review: Andres Freund
This covers all the SQL-standard trigger types supported for regular
tables; it does not cover constraint triggers. The approach for
acquiring the old row mirrors that for view INSTEAD OF triggers. For
AFTER ROW triggers, we spool the foreign tuples to a tuplestore.
This changes the FDW API contract; when deciding which columns to
populate in the slot returned from data modification callbacks, writable
FDWs will need to check for AFTER ROW triggers in addition to checking
for a RETURNING clause.
In support of the feature addition, refactor the TriggerFlags bits and
the assembly of old tuples in ModifyTable.
Ronan Dunklau, reviewed by KaiGai Kohei; some additional hacking by me.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
We should allow this so that matviews can be referenced in UPDATE/DELETE
statements in READ COMMITTED isolation level. The requirement for that
is that a re-fetch by TID will see the same row version the query saw
earlier, which is true of matviews, so there's no reason for the
restriction. Per bug #9398.
Michael Paquier, after a suggestion by me
Tom Lane
Alvaro Herrera
Andrew Dunstan
Noah Misch
Stephen Frost
Peter Eisentraut
Fujii Masao
Heikki Linnakangas
Simon Riggs
Bruce Momjian
Andres Freund
Kevin Grittner
Greg Stark
Jeff Davis
Robert Haas