Otherwise, after a deleted page gets even older, it becomes unrecyclable
again. B-tree has the same problem, and has had since time immemorial,
but let's at least fix this in GiST, where this is new.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
The explicit check in gistScanPage() isn't currently really necessary, as
a deleted page is always empty, so the loop would fall through without
doing anything, anyway. But it's a marginal optimization, and it gives a
nice place to attach a comment to explain how it works.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
Formerly, lcons was about the same speed as lappend, but with the new
List implementation, that's not so; with a long List, data movement
imposes an O(N) cost on lcons and list_delete_first, but not lappend.
Hence, invent list_delete_last with semantics parallel to
list_delete_first (but O(1) cost), and change various places to use
lappend and list_delete_last where this can be done without much
violence to the code logic.
There are quite a few places that construct result lists using lcons not
lappend. Some have semantic rationales for that; I added comments about
it to a couple that didn't have them already. In many such places though,
I think the coding is that way only because back in the dark ages lcons
was faster than lappend. Hence, switch to lappend where this can be done
without causing semantic changes.
In ExecInitExprRec(), this results in aggregates and window functions that
are in the same plan node being executed in a different order than before.
Generally, the executions of such functions ought to be independent of
each other, so this shouldn't result in visibly different query results.
But if you push it, as one regression test case does, you can show that
the order is different. The new order seems saner; it's closer to
the order of the functions in the query text. And we never documented
or promised anything about this, anyway.
Also, in gistfinishsplit(), don't bother building a reverse-order list;
it's easy now to iterate backwards through the original list.
It'd be possible to go further towards removing uses of lcons and
list_delete_first, but it'd require more extensive logic changes,
and I'm not convinced it's worth it. Most of the remaining uses
deal with queues that probably never get long enough to be worth
sweating over. (Actually, I doubt that any of the changes in this
patch will have measurable performance effects either. But better
to have good examples than bad ones in the code base.)
Patch by me, thanks to David Rowley and Daniel Gustafsson for review.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
Index-based calculation of this operator is exact. So, signature of
gist_bbox_distance() function is changes so that caller is responsible for
setting *recheck flag.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
This can cause valgrind to complain, as the flag marking a buffer as a
temporary copy was not getting initialized.
While on it, fill in with zeros newly-created buffer pages. This does
not matter when loading a block from a temporary file, but it makes the
push of an index tuple into a new buffer page safer.
This has been introduced by 1d27dcf, so backpatch all the way down to
9.4.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15899-0d24fb273b3dd90c@postgresql.org
Backpatch-through: 9.4
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
As we descend the GiST tree during insertion, we modify any downlinks on
the way down to include the new tuple we're about to insert (if they don't
cover it already). Modifying an existing downlink might cause an internal
page to split, if the new downlink tuple is larger than the old one. If
that happens, we need to back up to the parent and re-choose a page to
insert to. We used to detect that situation, thanks to the NSN-LSN
interlock normally used to detect concurrent page splits, but that got
broken by commit 9155580fd5. With that commit, we now use a dummy constant
LSN value for every page during index build, so the LSN-NSN interlock no
longer works. I thought that was OK because there can't be any other
backends modifying the index during index build, but missed that the
insertion itself can modify the page we're inserting to. The consequence
was that we would sometimes insert the new tuple to an incorrect page, one
whose downlink doesn't cover the new tuple.
To fix, add a flag to the stack that keeps track of the state while
descending tree, to indicate that a page was split, and that we need to
retry the descend from the parent.
Thomas Munro first reported that the contrib/intarray regression test was
failing occasionally on the buildfarm after commit 9155580fd5. The failure
was intermittent, because the gistchoose() function is not deterministic,
and would only occasionally create the right circumstances for this bug to
cause the failure.
Patch by Anastasia Lubennikova, with some changes by me to make it work
correctly also when the internal page split also causes the "grandparent"
to be split.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGJRzLo7tZExWfSbwM3XuK7aAK7FhdBV0FLkbUG%2BW0v0zg%40mail.gmail.com
Due to parallel development, gist added the missing conflict
information in c952eae52a, while 558a9165e0 moved that computation
to the primary for the index types that already had it. Thus adapt
gist to also compute on the primary, using
index_compute_xid_horizon_for_tuples() instead of its own copy of the
logic.
This also adds pg_waldump support for XLOG_GIST_DELETE records, which
previously was not properly present.
Bumps WAL version.
Author: Andres Freund
Discussion: https://postgr.es/m/20190406050243.bszosdg4buvabfrt@alap3.anarazel.de
Instead of WAL-logging every modification during the build separately,
first build the index without any WAL-logging, and make a separate pass
through the index at the end, to write all pages to the WAL. This
significantly reduces the amount of WAL generated, and is usually also
faster, despite the extra I/O needed for the extra scan through the index.
WAL generated this way is also faster to replay.
For GiST, the LSN-NSN interlock makes this a little tricky. All pages must
be marked with a valid (i.e. non-zero) LSN, so that the parent-child
LSN-NSN interlock works correctly. We now use magic value 1 for that during
index build. Change the fake LSN counter to begin from 1000, so that 1 is
safely smaller than any real or fake LSN. 2 would've been enough for our
purposes, but let's reserve a bigger range, in case we need more special
values in the future.
Author: Anastasia Lubennikova, Andrey V. Lepikhov
Reviewed-by: Heikki Linnakangas, Dmitry Dolgov
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
To do this, we scan GiST two times. In the first pass we make note of
empty leaf pages and internal pages. At second pass we scan through
internal pages, looking for downlinks to the empty pages.
Deleting internal pages is still not supported, like in nbtree, the last
child of an internal page is never deleted. That means that if you have a
workload where new keys are always inserted to different area than where
old keys are removed, the index will still grow without bound. But the rate
of growth will be an order of magnitude slower than before.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/B1E4DF12-6CD3-4706-BDBD-BF3283328F60@yandex-team.ru
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Similarly to B-tree, GiST index access method gets support of INCLUDE
attributes. These attributes aren't used for tree navigation and aren't
present in non-leaf pages. But they are present in leaf pages and can be
fetched during index-only scan.
The point of having INCLUDE attributes in GiST indexes is slightly different
from the point of having them in B-tree. The main point of INCLUDE attributes
in B-tree is to define UNIQUE constraint over part of attributes enabled for
index-only scan. In GiST the main point of INCLUDE attributes is to use
index-only scan for attributes, whose data types don't have GiST opclasses.
Discussion: https://postgr.es/m/73A1A452-AD5F-40D4-BD61-978622FF75C1%40yandex-team.ru
Author: Andrey Borodin, with small changes by me
Reviewed-by: Andreas Karlsson
Scanning an index in physical order is faster than walking it in logical
order, because sequential I/O is faster than random I/O. The idea and code
structure is borrowed from B-tree vacuum code.
Patch by Andrey Borodin, with changes by me. Based on early work by
Konstantin Kuznetsov, although the patch has been rewritten multiple times
since his original version.
Discussion: https://www.postgresql.org/message-id/1B9FAC6F-FA19-4A24-8C1B-F4F574844892%40yandex-team.ru
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
013ebc0a7b implements so-called GiST microvacuum. That is gistgettuple() marks
index tuples as dead when kill_prior_tuple is set. Later, when new tuple
insertion claims page space, those dead index tuples are physically deleted
from page. When this deletion is replayed on standby, it might conflict with
read-only queries. But 013ebc0a7b doesn't handle this. That may lead to
disappearance of some tuples from read-only snapshots on standby.
This commit implements resolving of conflicts between replay of GiST microvacuum
and standby queries. On the master we implement new WAL record type
XLOG_GIST_DELETE, which comprises necessary information. On stable releases
we've to be tricky to keep WAL compatibility. Information required for conflict
processing is just appended to data of XLOG_GIST_PAGE_UPDATE record. So,
PostgreSQL version, which doesn't know about conflict processing, will just
ignore that.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Discussion: https://postgr.es/m/20181212224524.scafnlyjindmrbe6%40alap3.anarazel.de
Author: Alexander Korotkov
Backpatch-through: 9.6
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Currently, KNN searches were supported only by GiST. SP-GiST also capable to
support them. This commit implements that support. SP-GiST scan stack is
replaced with queue, which serves as stack if no ordering is specified. KNN
support is provided for three SP-GIST opclasses: quad_point_ops, kd_point_ops
and poly_ops (catversion is bumped). Some common parts between GiST and SP-GiST
KNNs are extracted into separate functions.
Discussion: https://postgr.es/m/570825e8-47d0-4732-2bf6-88d67d2d51c8%40postgrespro.ru
Author: Nikita Glukhov, Alexander Korotkov based on GSoC work by Vlad Sterzhanov
Review: Andrey Borodin, Alexander Korotkov
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
This patch makes the geometric operators and functions use the exported
function of the float4/float8 datatypes. The main reason of doing so is
to check for underflow and overflow, and to handle NaNs consciously.
The float datatypes consider NaNs values to be equal and greater than
all non-NaN values. This change considers NaNs equal only for equality
operators. The placement operators, contains, overlaps, left/right of
etc. continue to return false when NaNs are involved. We don't need
to worry about them being considered greater than any-NaN because there
aren't any basic comparison operators like less/greater than for the
geometric datatypes.
The changes may be summarised as:
* Check for underflow, overflow and division by zero
* Consider NaN values to be equal
* Return NULL when the distance is NaN for all closest point operators
* Favour not-NaN over NaN where it makes sense
The patch also replaces all occurrences of "double" as "float8". They
are the same, but were used inconsistently in the same file.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
We include <float.h> in every place that needs isnan(), because MSVC
used to require it. However, since MSVC 2013 that's no longer necessary
(cf. commit cec8394b5c), so we can retire the inclusion to a
version-specific stanza in win32_port.h, where it doesn't need to
pollute random .c files. The header is of course still needed in a few
places for other reasons.
I (Álvaro) removed float.h from a few more files than in Emre's original
patch. This doesn't break the build in my system, but we'll see what
the buildfarm has to say about it all.
Author: Emre Hasegeli
Discussion: https://postgr.es/m/CAE2gYzyc0+5uG+Cd9-BSL7NKC8LSHLNg1Aq2=8ubjnUwut4_iw@mail.gmail.com
The principle behind the locking was not very well thought-out, and not
documented. Add a section in the README to explain how it's supposed to
work, and change the code so that it actually works that way.
This fixes two bugs:
1. If fast update was turned on concurrently, subsequent inserts to the
pending list would not conflict with predicate locks that were acquired
earlier, on entry pages. The included 'predicate-gin-fastupdate' test
demonstrates that. To fix, make all scans acquire a predicate lock on
the metapage. That lock represents a scan of the pending list, whether
or not there is a pending list at the moment. Forget about the
optimization to skip locking/checking for locks, when fastupdate=off.
2. If a scan finds no match, it still needs to lock the entry page. The
point of predicate locks is to lock the gabs between values, whether
or not there is a match. The included 'predicate-gin-nomatch' test
tests that case.
In addition to those two bug fixes, this removes some unnecessary locking,
following the principle laid out in the README. Because all items in
a posting tree have the same key value, a lock on the posting tree root is
enough to cover all the items. (With a very large posting tree, it would
possibly be better to lock the posting tree leaf pages instead, so that a
"skip scan" with a query like "A & B", you could avoid unnecessary conflict
if a new tuple is inserted with A but !B. But let's keep this simple.)
Also, some spelling fixes.
Author: Heikki Linnakangas with some editorization by me
Review: Andrey Borodin, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/0b3ad2c2-2692-62a9-3a04-5724f2af9114@iki.fi
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Add page-level predicate locking, due to gist's code organization, patch seems
close to trivial: add check before page changing, add predicate lock before page
scanning. Although choosing right place to check is not simple: it should not
be called during index build, it should support insertion of new downlink and so
on.
Author: Shubham Barai with editorization by me and Alexander Korotkov
Reviewed by: Alexander Korotkov, Andrey Borodin, me
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPtdcANpw5ePU3LvnTP8HCENFw6wygupQAyNBgD-sG3h0g@mail.gmail.com
Previously, it just returned the heap tuple count, which might be only an
estimate, and would be completely the wrong thing if the index is partial.
Since this function scans every index page anyway to find free pages,
it's practically free to count the surviving index tuples. Let's do that
and return an accurate count.
This is easily visible as a wrong reltuples value for a partial GiST
index following VACUUM, so back-patch to all supported branches.
Andrey Borodin, reviewed by Michail Nikolaev
Discussion: https://postgr.es/m/151956654251.6915.675951950408204404.pgcf@coridan.postgresql.org
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
As src/backend/access/transam/README says, PageGetLSN may only be called
by processes holding either exclusive lock on buffer, or a shared lock
on buffer plus buffer header lock. Therefore any place that only holds
a shared buffer lock must use BufferGetLSNAtomic instead of PageGetLSN,
which internally obtains buffer header lock prior to reading the LSN.
A few callsites failed to comply with this rule. This was detected by
running all tests under a new (not committed) assertion that verifies
PageGetLSN locking contract. All but one of the callsites that failed
the assertion are fixed by this patch. Remaining callsites were
inspected manually and determined not to need any change.
The exception (unfixed callsite) is in TestForOldSnapshot, which only
has a Page argument, making it impossible to access the corresponding
Buffer from it. Fixing that seems a much larger patch that will have to
be done separately; and that's just as well, since it was only
introduced in 9.6 and other bugs are much older.
Some of these bugs are ancient; backpatch all the way back to 9.3.
Authors: Jacob Champion, Asim Praveen, Ashwin Agrawal
Reviewed-by: Michaël Paquier
Discussion: https://postgr.es/m/CABAq_6GXgQDVu3u12mK9O5Xt5abBZWQ0V40LZCE+oUf95XyNFg@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The preceding patch allowed us to remove useless GiST support functions.
This patch actually does that for all the no-op cases in the core GiST
code. This buys us whatever performance gain is to be had, and more
importantly exercises the preceding patch.
There remain no-op functions in the contrib GiST opclasses, but those
will take more work to remove.
Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com
There are common use-cases in which the compress and/or decompress
functions can be omitted, with the result being that we make no
data transformation when storing or retrieving index values.
Previously, you had to provide a no-op function anyway, but this
patch allows such opclass support functions to be omitted.
Furthermore, if the compress function is omitted, then the core code
knows that the stored representation is the same as the original data.
This means we can allow index-only scans without requiring a fetch
function to be provided either. Previously you had to provide a
no-op fetch function if you wanted IOS to work.
This reportedly provides a small performance benefit in such cases,
but IMO the real reason for doing it is just to reduce the amount of
useless boilerplate code that has to be written for GiST opclasses.
Andrey Borodin, reviewed by Dmitriy Sarafannikov
Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
GiST's getNextNearest() function attempts to pfree the previously-returned
tuple if any (that is, scan->xs_hitup in HEAD, or scan->xs_itup in older
branches). However, if we are rescanning a plan node after ending a
previous scan early, those tuple pointers could be pointing to garbage,
because they would be pointing into the scan's pageDataCxt or queueCxt
which has been reset. In a debug build this reliably results in a crash,
although I think it might sometimes accidentally fail to fail in
production builds.
To fix, clear the pointer field anyplace we reset a context it might
be pointing into. This may be overkill --- I think probably only the
queueCxt case is involved in this bug, so that resetting in gistrescan()
would be sufficient --- but dangling pointers are generally bad news,
so let's avoid them.
Another plausible answer might be to just not bother with the pfree in
getNextNearest(). The reconstructed tuples would go away anyway in the
context resets, and I'm far from convinced that freeing them a bit earlier
really saves anything meaningful. I'll stick with the original logic in
this patch, but if we find more problems in the same area we should
consider that approach.
Per bug #14641 from Denis Smirnov. Back-patch to 9.5 where this
logic was introduced.
Discussion: https://postgr.es/m/20170504072034.24366.57688@wrigleys.postgresql.org
Michael Paquier
Heikki Linnakangas
Tom Lane
Alexander Korotkov
Andres Freund
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
Tomas Vondra
Teodor Sigaev
Robert Haas