As currently implemented, failure of a PGEVT_CONNRESET callback
forces the PGconn into the CONNECTION_BAD state (without closing
the socket, which is inconsistent with other failure paths), and
prevents later callbacks from being called. This seems highly
questionable, and indeed is questioned by comments in the source.
Instead, let's just ignore the result value of PGEVT_CONNRESET
calls. Like the preceding commit, this converts event callbacks
into "pure observers" that cannot affect libpq's processing logic.
Discussion: https://postgr.es/m/3185105.1644960083@sss.pgh.pa.us
As currently implemented, failure of a PGEVT_RESULTCREATE callback
causes the PGresult to be converted to an error result. This is
intellectually inconsistent (shouldn't a failing callback likewise
prevent creation of the error result? what about side-effects on the
behavior seen by other event procs? why does PQfireResultCreateEvents
act differently from PQgetResult?), but more importantly it destroys
any promises we might wish to make about the behavior of libpq in
nontrivial operating modes, such as pipeline mode. For example,
it's not possible to promise that PGRES_PIPELINE_SYNC results will
be returned if an event callback fails on those. With this
definition, expecting applications to behave sanely in the face of
possibly-failing callbacks seems like a very big lift.
Hence, redefine the result of a callback failure as being simply
that that event procedure won't be called any more for this PGresult
(which was true already). Event procedures can still signal failure
back to the application through out-of-band mechanisms, for example
via their passthrough arguments.
Similarly, don't let failure of a PGEVT_RESULTCOPY callback prevent
PQcopyResult from succeeding. That definition allowed a misbehaving
event proc to break single-row mode (our sole internal use of
PQcopyResult), and it probably had equally deleterious effects for
outside uses.
Discussion: https://postgr.es/m/3185105.1644960083@sss.pgh.pa.us
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
Python 2.7 went EOL 2020-01-01 and the support for Python 2 requires a fair
bit of infrastructure. Therefore we are removing Python 2 support in plpython.
This patch just rejects Python 2 during configure / mkvcbuild.pl. Future
commits will remove the code and infrastructure for Python 2 support and
adjust more of the documentation. This way we can see the buildfarm state
after the removal sooner and we can be sure that failures are due to
desupporting Python 2, rather than caused by infrastructure cleanup.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Double the default setting for hash_mem_multiplier, from 1.0 to 2.0.
This setting makes hash-based executor nodes use twice the usual
work_mem limit.
The PostgreSQL 15 release notes should have a compatibility note about
this change.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzndc_ROk6CY-bC6p9O53q974Y0Ey4WX8jcPbuTZYM4Q3A@mail.gmail.com
The 028_pitr_timelines.pl test would sometimes hang, waiting for a WAL
segment that was just filled up to be archived. It was because the
test used 'pg_stat_archiver.last_archived_wal' to check if a file was
archived, but the order that WAL files are archived when a standby is
promoted is not fully deterministic, and 'last_archived_wal' tracks
the last segment that was archived, not the highest-numbered WAL
segment. Because of that, if the archiver archived segment 3, and then
2, 'last_archived_wal' say 2, and the test query would think that 3
has not been archived yet.
Normally, WAL files are marked ready for archival in order, and the
archiver process will process them in order, so that issue doesn't
arise. We have used the same query on 'last_archived_wal' in a few
other tests with no problem. But when a standby is promoted, things
are a bit chaotic. After promotion, the server will try to archive all
the WAL segments from the old timeline that are in pg_wal, as well as
the history file and any new WAL segments on the new timeline. The
end-of-recovery checkpoint will create the .ready files for all the
WAL files on the old timeline, but at the same time, the new timeline
is opened up for business. A file from the new timeline can therefore
be archived before the files from the old timeline have been marked as
ready for archival.
It turns out that we don't really need to wait for the archival in
this particular test, because the standby server is about to be
stopped, and stopping a server will wait for the end-of-recovery
checkpoint and all WAL archivals to finish, anyway. So we can just
remove it from the test.
Add a note to the docs on 'pg_stat_archiver' view that files can be
archived out of order.
Reviewed-by: Tom Lane
Discussion: https://www.postgresql.org/message-id/3186114.1644960507@sss.pgh.pa.us
docbook-xsl's index generation stylesheet (autoidx.xsl) has a small bug: It
doesn't include xlink in exclude-result-prefixes. Normally just leads to a a
single xmlns:xlink in the <div> containing the index, but because our
customization emits that, xmlns:xlink intead gets added to every element
output by autoidx.xsl below the <div>, totalling around 100kB.
Adding the spurious xmlns:xlink to the <div> ourselves isn't great, but avoids
the duplication.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20220213201618.qz6p6noon3wagr3f%40alap3.anarazel.de
The XSL stylesheets used a mix of incorrect or outdated namespace
declarations for XHTML, probably based on ancient advice and examples.
Clean all this up.
Besides improving correctness (although probably no impact in
practice, other than possible validation failures), this removes a
bunch of useless namespace declarations in the HTML output.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/20220213201618.qz6p6noon3wagr3f%40alap3.anarazel.de
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Previously we used poll() directly to check for a POLLRDHUP event.
Instead, use the WaitEventSet API to poll the socket for
WL_SOCKET_CLOSED, which knows how to detect this condition on many more
operating systems.
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
LZ4 compression can now be performed on the client using
pg_basebackup -Ft --compress client-lz4, and LZ4 decompression of
a backup compressed on the server can be performed on the client
using pg_basebackup -Fp --compress server-lz4.
Dipesh Pandit, reviewed and tested by Jeevan Ladhe and Tushar Ahuja,
with a few corrections - and some documentation - by me.
Discussion: http://postgr.es/m/CAN1g5_FeDmiA9D8wdG2W6Lkq5CpubxOAqTmd2et9hsinTJtsMQ@mail.gmail.com
LZ4 compression can be a lot faster than gzip compression, so users
may prefer it even if the compression ratio is not as good. We will
want pg_basebackup to support LZ4 compression and decompression on the
client side as well, and there is a pending patch for that, but it's
by a different author, so I am committing this part separately for
that reason.
Jeevan Ladhe, reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/CANm22Cg9cArXEaYgHVZhCnzPLfqXCZLAzjwTq7Fc0quXRPfbxA@mail.gmail.com
This extends the logical decoding to also decode sequence increments.
We differentiate between sequences created in the current (in-progress)
transaction, and sequences created earlier. This mixed behavior is
necessary because while sequences are not transactional (increments are
not subject to ROLLBACK), relfilenode changes are. So we do this:
* Changes for sequences created in the same top-level transaction are
treated as transactional, i.e. just like any other change from that
transaction, and discarded in case of a rollback.
* Changes for sequences created earlier are applied immediately, as if
performed outside any transaction. This applies also after ALTER
SEQUENCE, which may create a new relfilenode.
Moreover, if we ever get support for DDL replication, the sequence
won't exist until the transaction gets applied.
Sequences created in the current transaction are tracked in a simple
hash table, identified by a relfilenode. That means a sequence may
already exist, but if a transaction does ALTER SEQUENCE then the
increments for the new relfilenode will be treated as transactional.
For each relfilenode we track the XID of (sub)transaction that created
it, which is needed for cleanup at transaction end. We don't need to
check the XID to decide if an increment is transactional - if we find a
match in the hash table, it has to be the same transaction.
This requires two minor changes to WAL-logging. Firstly, we need to
ensure the sequence record has a valid XID - until now the the increment
might have XID 0 if it was the first change in a subxact. But the
sequence might have been created in the same top-level transaction. So
we ensure the XID is assigned when WAL-logging increments.
The other change is addition of "created" flag, marking increments for
newly created relfilenodes. This makes it easier to maintain the hash
table of sequences that need transactional handling.
Note: This is needed because of subxacts. A XID 0 might still have the
sequence created in a different subxact of the same top-level xact.
This does not include any changes to test_decoding and/or the built-in
replication - those will be committed in separate patches.
A patch adding decoding of sequences was originally submitted by Cary
Huang. This commit reworks various important aspects (e.g. the WAL
logging and transactional/non-transactional handling). However, the
original patch and reviews were very useful.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Commit 0ba281cb4b added a new syntax
for the BASE_BACKUP command, with extensible options, but maintained
support for the legacy syntax. This isn't important for PostgreSQL,
where pg_basebackup works with older server versions but not newer
ones, but it could in theory matter for out-of-core users of the
replication protocol.
Discussion on pgsql-hackers, however, suggests that no one is aware
of any out-of-core use of the BASE_BACKUP command, and the consensus
is in favor of removing support for the old syntax to simplify the
code, so do that.
Discussion: http://postgr.es/m/CA+TgmoazKcKUWtqVa0xZqSzbKgTH+X-aw4V7GyLD68EpDLMh8A@mail.gmail.com
Historically, the location of any files generated by pg_upgrade, as of
the per-database logs and internal dumps, has been the current working
directory, leaving all those files behind when using --retain or on a
failure.
Putting all those contents in a targeted subdirectory makes the whole
easier to debug, and simplifies the code in charge of cleaning up the
logs. Note that another reason is that this facilitates the move of
pg_upgrade to TAP with a fixed location for all the logs to grab if the
test fails repeatedly.
Initially, we thought about being able to specify the output directory
with a new option, but we have settled on using a subdirectory located
at the root of the new cluster's data folder, "pg_upgrade_output.d",
instead, as at the end the new data directory is the location of all the
data generated by pg_upgrade. There is a take with group permissions
here though: if the new data folder has been initialized with this
option, we need to create all the files and paths with the correct
permissions or a base backup taken after a pg_upgrade --retain would
fail, meaning that GetDataDirectoryCreatePerm() has to be called before
creating the log paths, before a couple of sanity checks on the clusters
and before getting the socket directory for the cluster's host settings.
The idea of the new location is based on a suggestion from Peter
Eisentraut.
Also thanks to Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson, Tom
Lane and Bruce Momjian for the discussion (in alphabetical order).
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211212025017.GN17618@telsasoft.com
A very well-informed user might deduce this from what we said already,
but I'd bet against it. Lay it out explicitly.
While here, rewrite the comment about tuple routing to be more
intelligible to an average SQL user.
Per bug #17395 from Alexander Lakhin. Back-patch to v11. (The text
in this area is different in v10 and I'm not sufficiently excited
about this point to adapt the patch.)
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
Some cleanup for commit 54637508f87bd5f07fb9406bac6b08240283be3b:
Reformat pg_database.dat to reflect the new field order. Also update
the corresponding example in bki.sgml. Reorder the way the fields are
filled in dbcommands.c to correspond to the new order.
The most meaningful flags are shown, which are the ones useful for the
user and for automating and extending the set of tests supported
currently by check_guc.
This script may actually be removed in the future, but we are not
completely sure yet if and how we want to support the remaining sanity
checks performed there, that are now integrated in the main regression
test suite as of this commit.
Thanks also to Peter Eisentraut and Kyotaro Horiguchi for the
discussion.
Bump catalog version.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
This patch improves tab completion's ability to deal with
valid variant spellings of SQL identifiers. Notably:
* Unquoted upper-case identifiers are now downcased as the backend
would do, allowing them to be completed correctly.
* Tab completion can now match identifiers that are quoted even
though they don't need to be; for example "f<TAB> now completes
to "foo" if that's the only available name. Previously, only
names that require quotes would be offered.
* Schema-qualified identifiers are now supported where SQL syntax
allows it; many lesser-used completion rules neglected this.
* Completion operations that refer back to some previously-typed
name (for example, to complete names of columns belonging to a
previously-mentioned table) now allow variant spellings of the
previous name too.
In addition, performance of tab completion queries has been
improved for databases containing many objects, although
you'd only be likely to notice with a heavily-loaded server.
Authors of future tab-completion patches should note that this
commit changes many details about how tab completion queries
must be written:
* Tab completion queries now deal in raw object names; do not
use quote_ident().
* The name-matching restriction in a query must now be written
as "outputcol LIKE '%s'", not "substring(outputcol,1,%d)='%s'".
* The SchemaQuery mechanism has been extended so that it can
handle queries that refer back to a previous name. Most completion
queries that do that should be converted to SchemaQuery form.
Only consider using a literal query if the previous name can
never be schema-qualified. Don't use a literal query if the
name-to-be-completed can validly be schema-qualified, either.
* Use set_completion_reference() to specify which word is the previous
name to consider, for either a SchemaQuery or a literal query.
* If you want to offer some keywords in addition to a query result
(for example, offer COLUMN in addition to column names after
"ALTER TABLE t RENAME"), do not use the old hack of tacking the
keywords on with UNION. Instead use the new QUERY_PLUS macros
to write such keywords separately from the query proper. The
"addon" macro arguments that used to be used for this purpose
are gone.
* If your query returns something that's not a SQL identifier
(such as an attribute number or enum label), use the new
QUERY_VERBATIM macros to prevent the result from incorrectly
getting double-quoted. You may still need to use quote_literal
in such a query, too.
Tom Lane and Haiying Tang
Discussion: https://postgr.es/m/a63cbd45e3884cf9b3961c2a6a95dcb7@G08CNEXMBPEKD05.g08.fujitsu.local
I had made it depend on superuser, but that seems clearly inferior.
Also document the permissions requirement in the straming replication
protocol section of the documentation, rather than only in the
section having to do with pg_basebackup.
Idea and patch from Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/87bkzw160u.fsf@wibble.ilmari.org
If you have a low-bandwidth connection between the client and the
server, it's reasonable to want to compress on the server side but
then decompress and extract the backup on the client side. This
commit allows you do to do just that.
Dipesh Pandit, with minor and mostly cosmetic changes by me.
Discussion: http://postgr.es/m/CAN1g5_HiSh8ajUMd4ePtGyCXo89iKZTzaNyzP_qv1eJbi4YHXA@mail.gmail.com
The original text on refreshing collation versions was written
specifically for ICU, and then information for other providers was
incrementally tacked on at the end. Reword this to be a bit more
general and less reflective of how it was added.
This changes the data type of the catalog fields datcollate, datctype,
collcollate, and collctype from name to text. There wasn't ever a
really good reason for them to be of type name; presumably this was
just carried over from when they were fixed-size fields in pg_control,
first into the corresponding pg_database fields, and then to
pg_collation. The values are not identifiers or object names, and we
don't ever look them up that way.
Changing to type text saves space in the typical case, since locale
names are typically only a few bytes long. But it is also possible
that an ICU locale name with several customization options appended
could be longer than 63 bytes, so this also enables that case, which
was previously probably broken.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a@2ndquadrant.com
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6. Also, sysconfig didn't exist in
Python 3.1, so the minimum 3.x version is now 3.2.
We should consider back-patching this if it gives no further trouble,
as the no-longer-supported versions are old enough to probably not
be interesting to anyone.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
Commit 0ad8032910 failed to update
the pg_basebackup documentation to mention that "client-" or
"server-" can now be prepended to the compression method name. Fix
it there, and also in the --help output that you get from running
the binary.
Also in the documentation, there's an old issue that the arguments to
--checkpoint shouldn't be marked as parameters, because "fast" and
"spread" are literal strings. Fix that too.
Dagfinn Ilmari Mannsåker, partly as per a report from
Shinoda Noriyoshi.
Discussion: http://postgr.es/m/PH7PR84MB1885C1CF433057807551172BEE5F9@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
These functions aren't exact inverses, but they're closely related;
yet we document them in two different sections. Add cross-ref
<link>s to improve that situation.
While here, move the strpos and substr entries to re-alphabetize
Table 9.10. Also, drop an ancient compatibility note about
string_to_array, which wasn't even on the right page, so probably
few people ever saw it.
Discussion: https://postgr.es/m/164287017550.704.5840412183184961677@wrigleys.postgresql.org
The option --compress is extended to accept a compression method and an
optional compression level, as of the grammar METHOD[:LEVEL]. The
methods currently support are "none" and "gzip", for client-side
compression. Any of those methods use only an integer value for the
compression level, but any method implemented in the future could use
more specific keywords if necessary.
This commit keeps the logic backward-compatible. Hence, the following
compatibility rules apply for the new format of the option --compress:
* -z/--gzip is a synonym of --compress=gzip.
* --compress=NUM implies:
** --compress=none if NUM = 0.
** --compress=gzip:NUM if NUM > 0.
Note that there are also plans to extend more this grammar with
server-side compression.
Reviewed-by: Robert Haas, Magnus Hagander, Álvaro Herrera, David
G. Johnston, Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
This avoids possibly selecting Python 2.x on systems that have
both Python 2 and Python 3. We used to feel that what "python"
links to is a user choice that we should honor. However, we're
about to cease support for Python 2, so users will no longer have
any choice of that sort. This small change is being made ahead
of the big Python-2-ectomy so that we can see how much of the
buildfarm is not yet prepared for that. Systems with only
Python 2 will continue to build that way, for now.
Discussion: https://postgr.es/m/2872c9a0-4b0a-1354-d5f6-94d6f85ba354@enterprisedb.com
If connectivity to the server has been lost or become flaky, the
user might well try to send a query cancel. It's highly annoying
if PQcancel hangs up in such a case, but that's exactly what's likely
to happen. To ameliorate this problem, apply the PGconn's
tcp_user_timeout and keepalives settings to the TCP connection used
to send the cancel. This should be safe on Unix machines, since POSIX
specifies that setsockopt() is async-signal-safe. We are guessing
that WSAIoctl(SIO_KEEPALIVE_VALS) is similarly safe on Windows.
(Note that at least in psql and our other frontend programs, there's
no safety issue involved anyway, since we run PQcancel in its own
thread rather than in a signal handler.)
Most of the value here comes from the expectation that tcp_user_timeout
will be applied as a connection timeout. That appears to happen on
Linux, even though its tcp(7) man page claims differently. The
keepalive options probably won't help much, but as long as we can
apply them for not much code, we might as well.
Jelte Fennema, reviewed by Fujii Masao and myself
Discussion: https://postgr.es/m/AM5PR83MB017870DE81FC84D5E21E9D1EF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Tom Lane
Fujii Masao
Andres Freund
Peter Geoghegan
Etsuro Fujita
Heikki Linnakangas
Peter Eisentraut
John Naylor
Thomas Munro
Amit Kapila
Robert Haas
Tomas Vondra
Daniel Gustafsson
Michael Paquier
Bruce Momjian