During a VACUUM or CLUSTER command, the initial output emits a
fully qualified relation path with namespace. The post-action
errmsg only emitted the relation name however, which may lead
to hard to parse output when using multiple jobs with vacuumdb
as the output from different jobs may be interleaved. Include
the full path in the post-action errmsg to be consistent with
the initial errmsg.
Author: Mike Fiedler <miketheman@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CAMerE0oz+8G-aORZL_BJcPxnBqewZAvND4bSUysjz+r-oT1BxQ@mail.gmail.com
The initdb help message for --sync-only was a bit terse, and not
really self-explanatory. Make it clearer that initdb --sync-only
will exit after syncing, and expand the docs with a note on when
the option can be useful. Also align the help output with others
that exit immediately.
Author: Nathan Bossart, Gurjeet Singh
Discussion: https://postgr.es/m/CABwTF4U6hbNNE1bv=LxQdJybmUdZ5NJQ9rKY9tN82NXM8QH+iQ@mail.gmail.com
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Commit 80abbeba2 evidently didn't bother checking this code.
Also, list the generated executable in .gitignore (so it's
been a REALLY long time since anyone tried this).
Noted while trying out RISC-V spinlock patch. Given that
this has been broken for 5 years and nobody noticed, it's
likely not worth back-patching.
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
Background workers without shared memory access have been broken on
EXEC_BACKEND / windows builds since shortly after background workers have been
introduced, without that being reported. Clearly they are not commonly used.
The problem is that bgworker startup requires to be attached to shared memory
in EXEC_BACKEND child processes. StartBackgroundWorker() detaches from shared
memory for unconnected workers, but at that point we already have initialized
subsystems referencing shared memory.
Fixing this problem is not entirely trivial, so removing the option to not be
connected to shared memory seems the best way forward. In most use cases the
advantages of being connected to shared memory far outweigh the disadvantages.
As there have been no reports about this issue so far, we have decided that it
is not worth trying to address the problem in the back branches.
Per discussion with Alvaro Herrera, Robert Haas and Tom Lane.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802065116.j763tz3vz4egqy3w@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
The FDW batching code was using the same tuple descriptor both for all
slots (regular and plan slots), but that's incorrect - the subplan may
use a different descriptor. Currently this is benign, because batching
is used only for INSERTs, and in that case the descriptors always match.
But that would change if we allow batching UPDATEs.
Fix by copying the appropriate tuple descriptor. Backpatch to 14, where
the FDW batching was implemented.
Author: Amit Langote
Backpatch-through: 14, where FDW batching was added
Discussion: https://postgr.es/m/CA%2BHiwqEWd5B0-e-RvixGGUrNvGkjH2s4m95%3DJcwUnyV%3Df0rAKQ%40mail.gmail.com
Sets of Unicode keys are picky about the primes used when generating
a perfect hash function for them. Callers can spend many seconds
iterating through all the possible combinations of candidate
multipliers and seeds to find one that works.
Unicode updates typically happen only once a year, but it still makes
development and testing of Unicode scripts unnecessarily slow. To fix,
iterate over the primes in the innermost loop. This does not change
any existing functions checked into the tree.
It's not sensible to re-evaluate a direct-modify Foreign Update or Delete
during EvalPlanQual. However, ExecInitForeignScan() can still get called
if a table mixes local and foreign partitions. EvalPlanQualStart() left
the es_result_relations array uninitialized in the child EPQ EState, but
ExecInitForeignScan() still expected to find it. That caused a segfault.
Fix by skipping the es_result_relations lookup during EvalPlanQual
processing. To make things a bit more robust, also skip the
BeginDirectModify calls, and add a runtime check that ExecForeignScan()
is not called on direct-modify foreign scans during EvalPlanQual
processing.
This is new in v14, commit 1375422c78. Before that, EvalPlanQualStart()
copied the whole ResultRelInfo array to the EPQ EState. Backpatch to v14.
Report and diagnosis by Andrey Lepikhov.
Discussion: https://www.postgresql.org/message-id/cb2b808d-cbaa-4772-76ee-c8809bafcf3d%40postgrespro.ru
ALTER TABLE .. SET {LOGGED,UNLOGGED,ACCESS METHOD} would never do a
table-level object access hook, which was inconsistent with SET
TABLESPACE. Note that contrary to SET TABLESPACE, the no-op case is
left off for those commands as this requires tracking if commands have
been called, but they may not execute a physical rewrite. Another thing
worth noting is that the physical file swap at the end of a rewrite
does a couple of access calls for internal objects created for the swap
operation (internal objects are for example skipped by the tests of
sepgsql), but this does not trigger the hook for the table on which the
operation is done.
f41872d, that added support for SET LOGGED/UNLOGGED in ALTER TABLE,
visibly forgot to consider that.
Based on what I checked, two regression tests of sepgsql in ddl.sql are
going to log more information with this test, something that buildfarm
member rhinoceros will tell soon enough. I am not completely sure of
their format though, so these are not refreshed yet.
This is arguably a bug, but no backpatch is done as this could cause a
behavior change for anybody using object access hooks.
Reported-by: Jeff Davis
Discussion: https://postgr.es/m/YQJKV29/1a60uG68@paquier.xyz
If the replacement string doesn't contain \1...\9, then we don't
need sub-match locations, so we can use the REG_NOSUB optimization
here too. There's already a pre-scan of the replacement string
to look for backslashes, so extend that to check for digits, and
refactor to allow that to happen before we compile the regexp.
While at it, try to speed up the pre-scan by using memchr() instead
of a handwritten loop. It's likely that this is lost in the noise
compared to the regexp processing proper, but maybe not. In any
case, this coding is shorter.
Also, add some test cases to improve the poor coverage of
appendStringInfoRegexpSubstr().
Discussion: https://postgr.es/m/3534632.1628536485@sss.pgh.pa.us
Identifying the precise match locations for parenthesized subexpressions
is a fairly expensive task given the way our regexp engine works, both
at regexp compile time (where we must create an optimized NFA for each
parenthesized subexpression) and at runtime (where determining exact
match locations requires laborious search).
Up to now we've made little attempt to optimize this situation. This
patch identifies cases where we know at compile time that we won't
need to know subexpression match locations, and teaches the regexp
compiler to not bother creating per-subexpression regexps for
parenthesis pairs that are not referenced by backrefs elsewhere in
the regexp. (To preserve semantics, we obviously still have to
pin down the match locations of backref references.) Users could
have obtained the same results before this by being careful to
write "non capturing" parentheses wherever possible, but few people
bother with that.
Discussion: https://postgr.es/m/2219936.1628115334@sss.pgh.pa.us
Here we add additional parsing of Makefiles to determine when to add
references to libpgport and libpgcommon. We also remove the need for
adding the current contrib_extrasource by adding sine very basic logic to
implement the Makefile rules which add .l and .y files when they exist for
a given .o file in the Makefile.
This is just some very basic additional parsing of Makefiles to try to
keep things more consistent between builds using make and MSVC builds.
This happens to work with how our current Makefiles are laid out, but it
could easily be broken in the future if someone chooses do something in
the Makefile that we don't have parsing support for. We will cross that
bridge when we come to it.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvoPULi5JW3933NxgwxOmu9Ncvpcyt87UhEHAUX16QqmpA@mail.gmail.com
This saves a few lines of code. Also add a comment to mention why we use
ExplainPropertyInteger instead of ExplainPropertyUInteger given that
queryid is a uint64 type.
Author: David Rowley
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAApHDvqhSLYpSU_EqUdN39w9Uvb8ogmHV7_3YhJ0S3aScGBjsg@mail.gmail.com
Backpatch-through: 14, where this code was originally added
02a6a54ec added code to make use of the POPCNT instruction when available
for many of our common platforms. Here we do the same for MSVC for x86_64
machines.
MSVC's intrinsic functions for popcnt seem to differ from GCCs in that
they always appear to emit the popcnt instructions. In GCC the behavior
will depend on if the source file was compiled with -mpopcnt or not. For
this reason, the MSVC intrinsic function has been lumped into the
pg_popcount*_asm function, however doing that sort of invalidates the name
of that function, so let's rename it to pg_popcount*_fast().
Author: David Rowley
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqL3cbbK%3DGzNcwzsNR9Gi%2BaUvTudKkC4XgnQfXirJ_oRQ%40mail.gmail.com
I had committer's remorse almost immediately after pushing cb76fbd7e,
upon finding that removing capturing subexpressions' subREs from the
data structure broke my proposed patch for REG_NOSUB optimization.
Revert that data structure change. Instead, address the concern
about not changing capturing subREs' endpoints by not changing the
endpoints. We don't need to, because the point of that bit was just
to ensure that the atom has endpoints distinct from the outer state
pair that we're stringing the branch between. We already made
suitable states in the parenthesized-subexpression case, so the
additional ones were just useless overhead. This seems more
understandable than Spencer's original coding, and it ought to be
a shade faster too by saving a few state creations and arc changes.
(I actually see a couple percent improvement on Jacobson's web
corpus, though that's barely above the noise floor so I wouldn't
put much stock in that result.)
Also, fix the logic added by ea1268f63 to ensure that the subRE
recorded in v->subs[subno] is exactly the one with capno == subno.
Spencer's original coding recorded the child subRE of the capture
node, which is okay so far as having the right endpoint states is
concerned, but as of cb76fbd7e the capturing subRE itself always
has those endpoints too. I think the inconsistency is confusing
for the REG_NOSUB optimization.
As before, backpatch to v14.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
It appears that check_track_commit_timestamp was declared but has never
been defined in our code base. Likely this is just leftover cruft from
a development version of the original patch to add commit timestamps.
Let's just remove the useless declaration. The inclusion of guc.h also
seems surplus to requirements.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/f49aefb5-edbb-633a-af07-3e777023a94d@postgrespro.ru
Up to now, we remembered the definition of a capturing parenthesis
subexpression by storing a pointer to the associated subRE node.
That was okay before, because that subRE didn't get modified anymore
while parsing the rest of the regexp. However, in the wake of
commit ea1268f63, that's no longer true: the outer invocation of
parseqatom() feels free to scribble on that subRE. This seems to
work anyway, because the states we jam into the child atom in the
"prepare a general-purpose state skeleton" stanza aren't really
semantically different from the original endpoints of the child atom.
But that would be mighty easy to break, and it's definitely not how
things worked before.
Between this and the issue fixed in the prior commit, it seems best
to get rid of this dependence on subRE nodes entirely. We don't need
the whole child subRE for future backrefs, only its starting and ending
NFA states; so let's just store pointers to those.
Also, in the corner case where we make an extra subRE to handle
immediately-nested capturing parentheses, it seems like it'd be smart
to have the extra subRE have the same begin/end states as the original
child subRE does (s/s2 not lp/rp). I think that linking it from lp to
rp might actually be semantically wrong, though since Spencer's original
code did it that way, I'm not totally certain. Using s/s2 is certainly
not wrong, in any case.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Commit cebc1d34e taught parseqatom() to optimize cases where a branch
contains only one, "messy", atom by getting rid of excess subRE nodes.
The way we really should do that is to keep the subRE built for the
"messy" child atom; but to avoid changing parseqatom's nominal API,
I made it delete that node after copying its fields to the outer subRE
made by parsebranch(). It seems that that actually worked at the time;
but it became dangerous after ea1268f63, because that later commit
allowed the lower invocation of parse() to return a subRE that was also
pointed to by some v->subs[] entry. This meant we could wind up with a
dangling pointer in v->subs[], allowing a later backref to misbehave,
but only if that subRE struct had been reused in between. So the damage
seems confined to cases like '((...))...(...\2'.
To fix, do what I should have done before and modify parseqatom's API
to make it possible for it to remove the caller's subRE instead of the
callee's. That's safer because we know that subRE isn't complete yet,
so noplace else will have a pointer to it.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
This is a step toward storing stats in dynamic shared memory. As dynamic
shared memory segments are detached from just after before_shmem_exit()
callbacks are processed, but before on_shmem_exit() callbacks are, no stats
can be collected after before_shmem_exit() callbacks have been processed.
Parallel worker shutdown can cause stats to be emitted during DSM detach
callbacks, e.g. for SharedFileSet (which closes its files, which can causes
fd.c to emit stats about temporary files). Therefore parallel worker shutdown
needs to complete during the processing of before_shmem_exit callbacks.
One might think this problem could instead be solved by carefully ordering the
attaching to DSM segments, so that the pgstats segments get detached from
later than the parallel query ones. That turns out to not work because the
stats hash might need to grow which can cause new segments to be
allocated, which then will be detached from earlier.
There are two code changes:
First, call ParallelWorkerShutdown() via before_shmem_exit. That's a good idea
on its own, because other shutdown callbacks like ShutdownPostgres and
ShutdownAuxiliaryProcess are called via before_*.
Second, explicitly detach from the parallel query DSM segment, thereby
ensuring all stats are emitted during ParallelWorkerShutdown().
There are nicer solutions to these problems, but it's not obvious which of
those solutions is the correct one. As the shared memory stats work already is
a huge amount of work...
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Discussion: https://postgr.es/m/20210803023612.iziacxk5syn2r4ut@alap3.anarazel.de
Previously pgstat_initialize() was called in InitPostgres() and
AuxiliaryProcessMain(). As it turns out there was at least one case where we
reported stats before pgstat_initialize() was called, see
AutoVacWorkerMain()'s intentionally early call to pgstat_report_autovac().
This turns out to not be a problem with the current pgstat implementation as
pgstat_initialize() only registers a shutdown callback. But in the shared
memory based stats implementation we are working towards pgstat_initialize()
has to do more work.
After b406478b87 BaseInit() is a central place where initialization shared by
normal backends and auxiliary backends can be put. Obviously BaseInit() is
called before InitPostgres() registers ShutdownPostgres. Previously
ShutdownPostgres was the first before_shmem_exit callback, now that's commonly
pgstats. That should be fine.
Previously pgstat_initialize() was not called in bootstrap mode, but there
does not appear to be a need for that. It's now done unconditionally.
To detect future issues like this, assertions are added to a few places
verifying that the pgstat subsystem is initialized and not yet shut down.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Casting a value that's already of a type with a specific typmod
to an unspecified typmod doesn't do anything so far as run-time
behavior is concerned. However, it really ought to change the
exposed type of the expression to match. Up to now,
coerce_type_typmod hasn't bothered with that, which creates gotchas
in contexts such as recursive unions. If for example one side of
the union is numeric(18,3), but it needs to be plain numeric to
match the other side, there's no direct way to express that.
This is easy enough to fix, by inserting a RelabelType to update the
exposed type of the expression. However, it's a bit nervous-making
to change this behavior, because it's stood for a really long time.
(I strongly suspect that it's like this in part because the logic
pre-dates the introduction of RelabelType in 7.0. The commit log
message for 57b30e8e2 is interesting reading here.) As a compromise,
we'll sneak the change into 14beta3, and consider back-patching to
stable branches if no complaints emerge in the next three months.
Discussion: https://postgr.es/m/CABNQVagu3bZGqiTjb31a8D5Od3fUMs7Oh3gmZMQZVHZ=uWWWfQ@mail.gmail.com
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
This was an oversight in 07bf378509. While it does reduce the benefit of the
simplification due to that commit, it still seems like a win to me.
It seems like it might be a good idea to have a function mirroring
InitPostmasterChild() / InitStandaloneProcess() for postmaster in miscinit.c
to make it easier to keep initialization between the three possible
environment in sync.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210805214109.lzfk3r3ae37bahmv@alap3.anarazel.de
For one, the existing location lead to somewhat awkward code in main(). For
another, the new location is easier to understand anyway.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Neither is actually initialized as an auxiliary process, so it does not really
make sense to reserve a PGPROC etc for them.
This keeps checker mode implemented by exiting partway through bootstrap
mode. That might be worth changing at some point, perhaps if we ever extend
checker mode to be a more general tool.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
After the preceding commits the auxprocess code is independent from
bootstrap.c - so a dedicated file seems less confusing.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Kept separate for ease of review, particularly because pgindent insists on
reflowing a few comments.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
There practically was no shared code between the two, once all the ifs are
removed. And it was quite confusing that aux processes weren't actually
started by the call to AuxiliaryProcessMain() in main().
There's more to do, AuxiliaryProcessMain() should move out of bootstrap.c, and
BootstrapModeMain() shouldn't use/be part of AuxProcType.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
It is confusing that aux processes are started with --forkboot, given that
bootstrap mode cannot run below postmaster.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
Up to now we did a PQconsumeInput() for each pipelined query, asking the OS
for more input - which it often won't have, as all results might already have
been sent. That turns out to have a noticeable performance impact.
Alvaro Herrera reviewed the idea to add the PQisBusy() check, but not this
concrete patch.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210720180039.23rivhdft3l4mayn@alap3.anarazel.de
Backpatch: 14, where libpq/pgbench pipelining was introduced.
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Oversight in commit 3499df0d, which generalized the reloption as a way
of giving users a way to consistently avoid VACUUM's index bypass
optimization.
Per off-list report from Nikolay Shaplov.
Backpatch: 14-, where index cleanup reloption was extended.
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This patch adds new functions regexp_count(), regexp_instr(),
regexp_like(), and regexp_substr(), and extends regexp_replace()
with some new optional arguments. All these functions follow
the definitions used in Oracle, although there are small differences
in the regexp language due to using our own regexp engine -- most
notably, that the default newline-matching behavior is different.
Similar functions appear in DB2 and elsewhere, too. Aside from
easing portability, these functions are easier to use for certain
tasks than our existing regexp_match[es] functions.
Gilles Darold, heavily revised by me
Discussion: https://postgr.es/m/fc160ee0-c843-b024-29bb-97b5da61971f@darold.net
959d00e9d added the ability to make use of an Append node instead of a
MergeAppend when we wanted to perform a scan of a partitioned table and
the required sort order was the same as the partitioned keys and the
partitioned table was defined in such a way that earlier partitions were
guaranteed to only contain lower-order values than later partitions.
However, previously we didn't allow these ordered partition scans for
LIST partitioned table when there were any partitions that allowed
multiple Datums. This was a very cheap check to make and we could likely
have done a little better by checking if there were interleaved
partitions, but at the time we didn't have visibility about which
partitions were pruned, so we still may have disallowed cases where all
interleaved partitions were pruned.
Since 475dbd0b7, we now have knowledge of pruned partitions, we can do a
much better job inside partitions_are_ordered().
Here we pass which partitions survived partition pruning into
partitions_are_ordered() and, for LIST partitioning, have it check to see
if any live partitions exist that are also in the new "interleaved_parts"
field defined in PartitionBoundInfo.
For RANGE partitioning we can relax the code which caused the partitions
to be unordered if a DEFAULT partition existed. Since we now know which
partitions were pruned, partitions_are_ordered() now returns true when the
DEFAULT partition was pruned.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrdoN_sXU52i=QDXe2k3WAo=EVry29r2+Tq2WYcn2xhEA@mail.gmail.com
For partitioned tables with large numbers of partitions where queries are
able to prune all but a very small number of partitions, the time spent in
the planner looping over RelOptInfo.part_rels checking for non-NULL
RelOptInfos could become a large portion of the overall planning time.
Here we add a Bitmapset that records the non-pruned partitions. This
allows us to more efficiently skip the pruned partitions by looping over
the Bitmapset.
This will cause a very slight slow down in cases where no or not many
partitions could be pruned, however, those cases are already slow to plan
anyway and the overhead of looping over the Bitmapset would be
unmeasurable when compared with the other tasks such as path creation for
a large number of partitions.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqnPx6JnUuPwaf5ao38zczrAb9mxt9gj4U1EKFfd4AqLA@mail.gmail.com
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
The comment didn't make sense anymore since at least 626eb02198. As it didn't
actually explain anything anyway, just remove it.
Author: Andres Freund <andres@anarazel.de>
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
The test is expecting two prepared transactions corresponding to two
subscriptions but it waits to catch up for just one subscription. Fix it
by allowing to wait for both subscriptions.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-By: Amit Kapila, Vignesh C, Peter Smith
Discussion: https://postgr.es/m/CAA4eK1+_0iNQ8Z=KVTjmmAqNX-hyv+1+fnZ-Yx8CVP=uAcekqw@mail.gmail.com
As of commit 84f5c2908, executing SQL commands (via SPI or otherwise)
requires having either an active Portal, or a caller-established
active snapshot. We were simply Assert'ing that that's the case.
But we've now had a couple different reports of people testing
extensions that didn't meet this requirement, and were confused by
the resulting crash. Let's convert the Assert to a test-and-elog,
in hopes of making the issue clearer for extension authors.
Per gripes from Liu Huailing and RekGRpth. Back-patch to v11,
like the prior commit.
Discussion: https://postgr.es/m/OSZPR01MB6215671E3C5956A034A080DFBEEC9@OSZPR01MB6215.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/17035-14607d308ac8643c@postgresql.org
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
This reverts commit 6a2c532. fairywren and bowerbird failed those tests
because of incorrect versions of ZLIB linked to, causing errors like
SIGBREAKs that stopped buildfarm runs or EACCES failures when writing
compressed WAL segments.
Andrew Dunstan has done all the investigation here, so he deserves all
the credit for being able to enable those tests on Windows.
Discussion: https://postgr.es/m/9040d5ed-6462-66a4-07ac-2923785ae563@dunslane.net
It should always be the case that the last checkpoint record is still
readable, because otherwise, a crash would leave us in a situation
from which we can't recover. Therefore the test removed by this patch
should always succeed. For it to fail, either there has to be a serious
bug in the code someplace, or the user has to be manually modifying
pg_wal while crash recovery is running. If it's the first one, we
should fix the bug. If it's the second one, they should stop, or
anyway they're doing so at their own risk. In neither case does
a full checkpoint instead of an end-of-recovery record seem like a
clear winner. Furthermore, rarely-taken code paths are particularly
vulnerable to bugs, so let's simplify by getting rid of this one.
Discussion: http://postgr.es/m/CA+TgmoYmw==TOJ6EzYb_vcjyS09NkzrVKSyBKUUyo1zBEaJASA@mail.gmail.com
Those tests are not designed to fail, but if they do, like on some cases
for Windows because of ZLIB (?), they could remain stuck. Using
--no-loop makes the test fail immediately. The oldest test with
--endpos already did that.
Those tests have been added in ffc9dda.
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/ec093ff1-a53c-0091-46a2-4537354b0dd4@dunslane.net
CheckpointLock was removed in commit d18e75664a, and commit ce197e91d0
updated a leftover comment in CreateCheckPoint, but there was another
copy of it in CreateRestartPoint still.
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
Buildfarm shows that this test has a further failure mode when a
checkpoint starts earlier than expected, so we detect a "checkpoint
completed" line that's not the one we want. Change the config to try
and prevent this.
Per buildfarm
While at it, update one comment that was forgotten in commit
d18e75664a.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210729.162038.534808353849568395.horikyota.ntt@gmail.com
Commit ffa2e4670 changed libpq so that multiple error reports
occurring during one operation (a connection attempt or query)
are accumulated in conn->errorMessage, where before new ones
usually replaced any prior error. At least in theory, that makes
us more vulnerable to running out of memory for the errorMessage
buffer. If it did happen, the user would be left with just an
empty-string error report, which is pretty unhelpful.
We can improve this by relying on pqexpbuffer.c's existing "broken
buffer" convention to track whether we've hit OOM for the current
operation's error string, and then substituting a constant "out of
memory" string in the small number of places where the errorMessage
is read out.
While at it, apply the same method to similar OOM cases in
pqInternalNotice and pqGetErrorNotice3.
Back-patch to v14 where ffa2e4670 came in. In principle this could
go back further; but in view of the lack of field reports, the
hazard seems negligible in older branches.
Discussion: https://postgr.es/m/530153.1627425648@sss.pgh.pa.us
Certain versions of msys2/Windows have been observed to resolve symlinks
in perl2host rather than just follow them. This defeats using a
symlinked shorter path to a longer path, and makes certain tests fail.
We therefore call perl2host on the parent directory of the symlink and
thereafter just use that result.
Apply to release 14 where the problem has been observed.
Sometimes cygpath has been observed to return a path with a trailing
slash. That can cause problems, Also, make "cygpath" usage
consistent with "pwd -W" with respect to the use of forward slashes.
Backpatch to release 14 where the current code was introduced.
This is a non-functional change only to refactor code to extract some
replication logic into static functions.
This is done as preparation for the 2PC streaming patch which also shares
this common logic.
Author: Peter Smith
Reviewed-By: Amit Kapila
Discussion: https://postgr.es/m/CAHut+PuiSA8AiLcE2N5StzSKs46SQEP_vDOUD5fX2XCVtfZ7mQ@mail.gmail.com
The clientside log saved from the testrun was removed in 1caef31d9
but the entry in the .gitignore file remained. While this exists
in older branches as well, it's mostly a cosmetical fix so no back-
patching is done.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/F8E73040-BB6F-43BF-95B4-3CEC037BE856@yesql.se
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
This method will modify or delete an existing line in the config file
rather than simply appending to the file. This makes adjustment of files
for older versions much simpler and more compact.
This is now the default for pg_ctl, but having the flag here explicitly
does no harm and helps with backwards compatibility of the PostgresNode
module.
The following changes are done:
- In pg_archivecleanup, the cleanup of older WAL segments would never
fail immediately.
- In pgbench, the initialization of a thread barrier would not fail
hard.
- In pg_recvlogical, a stat() failure never got the call.
- In pg_basebackup, two chmod() reported a failure without exit()'ing
when unpacking some tar data freshly received. It may be possible to
continue writing some data even after this failure, but that could be
confusing to the user at the end.
These are arguably bugs, but they would happen for code paths where a
failure is unlikely going to happen, so no backpatch is done.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
pg_verifybackup needs by default pg_waldump to check after a range of
WAL segments required for a backup, except if --no-parse-wal is
specified. The code checked for the presence of the binary pg_waldump
in an installation and reported an error, but it forgot to properly
exit(). This could lead to confusing errors reported.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
Backpatch-through: 13
This adjusts the MSVC build scripts to look at the compile flags mentioned
in the Makefile to look for -D arguments in order to determine which
constants should be defined in Visual Studio builds.
One small anomaly that appeared as a result of this change is that the
Makefile for the ltree contrib module defined LOWER_NODE, but this was
not properly defined in the MSVC build scripts. This meant that MSVC
builds would differ in case sensitivity in the ltree module when
compared to builds using a make build environment. To maintain the same
behavior here we remove the -DLOWER_NODE from the Makefile and just always
define it in ltree.h for non-MSVC builds. We need to maintain the old
behavior here as this affects the on-disk compatibility of GiST indexes
when using the ltree type.
The only other resulting change here is that REFINT_VERBOSE is now defined
for the autoinc, insert_username and moddatetime contrib modules.
Previously on MSVC, this was only defined for the refint module. This
aligns the behavior to build environments using make as all 4 of these
modules share the same Makefile.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
In order not to duplicate references and libraries in the Visual Studio
project files produced by the MSVC build scripts, have them check if a
particular reference or library already exists before adding the same one
again.
Reviewed-by: Álvaro Herrera, Andrew Dunstan, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
Previously the 'includes' field was a string. It's slightly nicer to
manage this when it's defined as an array instead. This allows us to
more easily detect and eliminate duplicates.
Reviewed-by: Álvaro Herrera, Andrew Dunstan, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Commit 7bffc9b7bf changed xact_redo_commit() so that it updates
minRecoveryPoint on truncation, but forgot to change xact_redo_abort().
Back-patch to all supported versions.
Reported-by: mengjuan.cmj@alibaba-inc.com
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/b029fce3-4fac-4265-968e-16f36ff4d075.mengjuan.cmj@alibaba-inc.com
The logic used to support a change of access method for a table is
similar to changes for tablespace or relation persistence, requiring a
table rewrite with an exclusive lock of the relation changed. Table
rewrites done in ALTER TABLE already go through the table AM layer when
scanning tuples from the old relation and inserting them into the new
one, making this implementation straight-forward.
Note that partitioned tables are not supported as these have no access
methods defined.
Author: Justin Pryzby, Jeff Davis
Reviewed-by: Michael Paquier, Vignesh C
Discussion: https://postgr.es/m/20210228222530.GD20769@telsasoft.com
This appears to have been added way back in ee3b4188a but it's a little
unclear why the change made in that commit is even needed given that
320c7eb8c, dated 18 months earlier, added code to copy fmgroids.h to
src/include/utils.
amcheck seems to get away without adding the additional include directory,
so perhaps dblink can get away with it too.
This builds ok in my VS2017 environment, but the buildfarm may serve as a
reminder about why ee3b4188a was required. There's only one way to find
out for sure.
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
This changes the behavior of examining the pg_file_settings view after
changing a config option that requires restart. The user needs to know
that any change of such options does not take effect until a restart,
and this worked correctly if the line is edited without removing it.
However, for the case where the line is removed altogether, the flag
doesn't get set, because a flag was only set in set_config_option, but
that's not called for lines removed. Repair.
(Ref.: commits 62d16c7fc5 and a486e35706)
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202107262302.xsfdfc5sb7sh@alvherre.pgsql
We failed to deal with an UNKNOWN-type input for
anycompatiblemultirange; that should throw an error indicating
that we don't know how to resolve the multirange type.
We also failed to infer the type of an anycompatiblerange output
from an anycompatiblemultirange input or vice versa.
Per bug #17066 from Alexander Lakhin. Back-patch to v14
where multiranges were added.
Discussion: https://postgr.es/m/17066-16a37f6223a8470b@postgresql.org
Commit 48c5c9068 failed to allow for buildfarm animals that
force jit = on. I'm surprised that this hasn't come up
elsewhere in explain.sql, so turn it off for that whole
test script not just the one new test case.
Per buildfarm.
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
pg_event_trigger_ddl_commands used "pg_temp" to refer to any
temp schema, not only that of the current backend. This seems
like overreach. It's somewhat unlikely that DDL commands would
refer to temp objects of other sessions to begin with, but if they
do, "pg_temp" would be a most misleading way to display the action.
While this seems like a bug, it's not quite out of the realm of
possibility that somebody out there is expecting the current
behavior. Hence, fix in HEAD, but don't back-patch.
Discussion: https://postgr.es/m/CAAJ_b97W=QaGmag9AhWNbmx3uEYsNkXWL+OVW1_E1D3BtgWvtw@mail.gmail.com
This patch causes EXPLAIN output to refer to objects that are in
the current session's temp schema with the "pg_temp" schema alias
rather than that schema's actual name. This is useful for our own
testing purposes since it will stabilize EXPLAIN VERBOSE output
for such cases, allowing us to use that in regression tests.
It should be less confusing for end users too.
Since ruleutils.c needs to change behavior for this, the change
also leaks into a few other users of ruleutils.c, for example
pg_get_viewdef(). AFAICS that won't cause any problems.
We did find that aggressively trying to change this behavior
across-the-board would cause issues, but as long as "pg_temp"
only appears within generated SQL text, I think it'll be fine.
Along the way, make get_namespace_name_or_temp conform to the
same API as get_namespace_name, ie that it returns a palloc'd
string or NULL. The current behavior hasn't caused any bugs
since no callers attempt to pfree the result, but if it gets
more widespread usage that could become a problem.
Amul Sul, reviewed and extended by me
Discussion: https://postgr.es/m/CAAJ_b97W=QaGmag9AhWNbmx3uEYsNkXWL+OVW1_E1D3BtgWvtw@mail.gmail.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
A check in the ZLIB portion of the test to match the name of a
non-compressed partial segment with a completed compressed segment was
using m//, while a simple equality check is enough. This makes the test
a bit stricter without impacting its coverage.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210726.174622.826565852378770261.horikyota.ntt@gmail.com
strtoint(), via strtol(), would skip leading whitespaces but the same
rule was not applied for trailing whitespaces, leading to an
inconsistent behavior. Some tests are changed to cover more this area.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YP5Pv0d13Ct+03ve@paquier.xyz
Coverity complained that my commit 80ba4bb383 added a dubious coding
for a consistency check that there isn't more than one row for a certain
tgrelid/tgparentid combination. But we don't check for that explicitly
anywhere else, and if we were to do it, it should be a full
shouldn't-happen elog not just an assert. It doesn't seem that this is
very important anyway, so remove it.
Discussion: https://postgr.es/m/1337562.1627224583@sss.pgh.pa.us
Commit ad600bba04 added psql command \dX listing extended statistics
objects, but it failed to consider search_path when selecting the
elements so some of the returned elements might be invisible.
The visibility was already considered for tab completion (added by
commit d99d58cdc8), so adding it to the query is fairly simple.
Reported and fix by Justin Pryzby, regression tests by me. Backpatch
to PostgreSQL 14, where \dX was introduced.
Batchpatch-through: 14
Author: Justin Pryzby
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
Formerly, when specifying NUMERIC(precision, scale), the scale had to
be in the range [0, precision], which was per SQL spec. This commit
extends the range of allowed scales to [-1000, 1000], independent of
the precision (whose valid range remains [1, 1000]).
A negative scale implies rounding before the decimal point. For
example, a column might be declared with a scale of -3 to round values
to the nearest thousand. Note that the display scale remains
non-negative, so in this case the display scale will be zero, and all
digits before the decimal point will be displayed.
A scale greater than the precision supports fractional values with
zeros immediately after the decimal point.
Take the opportunity to tidy up the code that packs, unpacks and
validates the contents of a typmod integer, encapsulating it in a
small set of new inline functions.
Bump the catversion because the allowed contents of atttypmod have
changed for numeric columns. This isn't a change that requires a
re-initdb, but negative scale values in the typmod would confuse old
backends.
Dean Rasheed, with additional improvements by Tom Lane. Reviewed by
Tom Lane.
Discussion: https://postgr.es/m/CAEZATCWdNLgpKihmURF8nfofP0RFtAKJ7ktY6GcZOPnMfUoRqA@mail.gmail.com
Adjust the header comment in get_agg_clause_costs so that it matches what
the function currently does. No recursive searching has been done ever
since 0a2bc5d61. It also does not determine the aggtranstype like the
comment claimed. That's all done in preprocess_aggref().
preprocess_aggref also now determines the numOrderedAggs, so remove the
mention that get_agg_clause_costs also calculates "counts".
Normally, since this is just an adjustment of a comment it might not be
worth back-patching, but since this code is new to PG14 and that version
is still in beta, then it seems worth having the comments match.
Discussion: https://postgr.es/m/CAApHDvrrGrTJFPELrjx0CnDtz9B7Jy2XYW3Z2BKifAWLSaJYwQ@mail.gmail.com
Backpatch-though: 14
These have been introduced by 7fbe0c8, and could happen for
pg_basebackup and pg_receivewal.
Per report from Coverity for the ones in walmethods.c, I have spotted
the ones in receivelog.c after more review.
Backpatch-through: 10
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
5a1e1d8302 was a minimal bug fix for dc7420c2c9. To avoid future bugs of
that kind, deduplicate the choice of a relation's horizon into a new helper,
GlobalVisHorizonKindForRel().
As the code in question was only introduced in dc7420c2c9 it seems worth
backpatching this change as well, otherwise 14 will look different from all
other branches.
A different approach to this was suggested by Matthias van de Meent.
Author: Andres Freund
Discussion: https://postgr.es/m/20210621122919.2qhu3pfugxxp3cji@alap3.anarazel.de
Backpatch: 14, like 5a1e1d8302
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
We previously took a hard-line attitude that callers should never print
a null string pointer, and doing so is worthy of an assertion failure
or crash. However, we've long since flushed out any easy-to-find bugs
of that nature. What remains is a lot of code that perhaps could fail
that way in hard-to-reach corner cases. For example, in something as
simple as
ereport(ERROR,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("constraint \"%s\" for table \"%s\" does not exist",
conname, get_rel_name(relid))));
one must wonder whether it's completely guaranteed that get_rel_name
cannot return NULL in this context. If such a situation did occur,
the existing policy converts what might be a pretty minor bug into
a server crash condition. This is not good for robustness.
Hence, let's follow the lead of glibc and print "(null)" instead
of failing. We should, of course, still consider it a bug if that
behavior is reachable in ordinary use; but crashing seems less
desirable than not crashing.
This fix works across-the-board in v12 and up, where we always use
src/port/snprintf.c. Before that, on most platforms we're at the mercy
of the local libc, but it appears that Solaris 10 is the only supported
platform where we'd still get a crash. Most other platforms such as
*BSD, macOS, and Solaris 11 have adopted glibc's behavior at some
point. (AIX and HPUX just print "" not "(null)", but that's close
enough.) I've not checked what Windows' native printf would do, but
it doesn't matter because we've long used snprintf.c on that platform.
In v12 and up, also const-ify related code so that we're not casting
away const on the constant string. This is just neatnik-ism, since
next to no compilers will warn about that.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
Recently-added references to ParseState weren't covered by #include
references, creating unwanted ordering dependencies for users of
these headers.
Oversight in commit 2bfb50b3d. Per headerscheck/cpluspluscheck.
This fixes two compilation failures caused by 6f164e6. Interesting to
see that missing <limits.h> dies not fail in Linux or even Windows. On
MacOS, it fails, though.
Per various buildfarm members.
Most of the integer options for command-line binaries now make use of a
single routine able to do the job, fixing issues with the detection of
sloppy values caused for example by the use of atoi(), that fails on
strings beginning with numerical characters with junk trailing
characters.
This commit cuts down the number of strings requiring translation by 26
per my count, switching the code to have two error types for invalid and
out-of-range values instead.
Much more could be done here, with float or even int64 options, but
int32 was the most appealing case as it is possible to rely on strtol()
to do the job reliably. Note that there are some exceptions for now,
like pg_ctl or pg_upgrade that use their own logging logic. A couple of
negative TAP tests required some adjustments for the new errors
generated.
pg_dump and pg_restore tracked the maximum number of parallel jobs
within the option parsing. The code is refactored a bit to track that
in the code dedicated to parallelism instead.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CALj2ACXqdG9WhqVoJ9zYf-iZt7sgK7Szv5USs=he6NnWQ2ofTA@mail.gmail.com
Animals running in Czech locale failed. I could try to find table names
that don't have this problem, but it seems simpler to just use the C
locale.
Per buildfarm
Renaming triggers on partitioned tables had two problems: first,
it did not recurse to renaming the triggers on the partitions; and
second, it failed to prohibit renaming clone triggers. Having triggers
with different names in partitions is pointless, and furthermore pg_dump
would not preserve names for partitions anyway.
Not backpatched -- making the ALTER TRIGGER throw an error in stable
versions might cause problems for existing scripts.
Co-authored-by: Arne Roland <A.Roland@index.de>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/d0fd7040c2fb4de1a111b9d9ccc456b8@index.de
This reverts commit 91d395f, to avoid running those tests on Windows.
The tests are globally stable across all buildfarm members, except
fairywren (crash of pg_receivewal) and bowerdird (SIGBREAK preventing
the buildfarm run to complete). Those errors are rather strange, as
other hosts with very similar characteristics are able to run those
tests without breaking a sweat.
For now, disable those tests on Windows to turn back the buildfarm to
green.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/9040d5ed-6462-66a4-07ac-2923785ae563@dunslane.net
Code inlined by LLVM can crash or fail with "Relocation type not
implemented yet!" if it tries to access thread local variables. Don't
inline such code.
Back-patch to 11, where LLVM arrived. Bug #16696.
Author: Dmitry Marakasov <amdmi3@amdmi3.ru>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/16696-29d944a33801fbfe@postgresql.org
Datum sorts can be significantly faster than tuple sorts, especially when
the data type being sorted is a pass-by-value type. Something in the
region of 50-70% performance improvements appear to be possible.
Just in case there's any confusion; the Datum sort is only used when the
targetlist of the Sort node contains a single column, not when there's a
single column in the sort key and multiple items in the target list.
Author: Ronan Dunklau
Reviewed-by: James Coleman, David Rowley, Ranier Vilela, Hou Zhijie
Tested-by: John Naylor
Discussion: https://postgr.es/m/3177670.itZtoPt7T5@aivenronan
In postgresql.conf, memory and file size GUCs can be specified with "B"
(bytes) as of b06d8e58b. Likewise, time GUCs can be specified with "us"
(microseconds) as of caf626b2c. Update postgres.conf.sample to reflect
that fact.
Pavel Luzanov
Backpatch to v12, which is the earliest version that allows both of
these units. A separate commit will document the "B" case for v11.
Discussion: https://www.postgresql.org/message-id/flat/f10d16fc-8fa0-1b3c-7371-cb3a35a13b7a%40postgrespro.ru
Follow-up to 2ed532ee8c, a few error
messages in the logical replication area currently only deal with
tables, but if we're anticipating more relkinds such as sequences
being handled, then these messages also fall into the category
affected by the previous patch, so adjust them too.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/c9ba5c6a-4bd5-e12c-1b3c-edbcaedbf392@enterprisedb.com
Commit 2c03216d83 changed XLOG_FPI_FOR_HINT records so that they always
included full-page images even when full_page_writes was disabled. However,
in this setting, they don't need to do that because hint bit updates don't
need to be protected from torn writes.
Therefore, this commit makes XLOG_FPI_FOR_HINT records honor full_page_writes
setting. That is, XLOG_FPI_FOR_HINT records may include no full-page images
if full_page_writes is disabled, and WAL replay of them does nothing.
Reported-by: Zhang Wenjie
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/tencent_60F11973A111EED97A8596FFECC4A91ED405@qq.com
If an error was raised during our initial attempt to check whether
a successfully-compiled expression is "simple", subsequent calls of
exec_stmt_execsql would suppose that stmt->mod_stmt was already computed
when it had not been. This could lead to assertion failures in debug
builds; in production builds the effect would typically be to act as
if INTO STRICT had been specified even when it had not been. Of course
that only matters if the subsequent attempt to execute the expression
succeeds, so that the problem can only be reached by fixing a failure
in some referenced, inline-able SQL function and then retrying the
calling plpgsql function in the same session.
(There might be even-more-obscure ways to change the expression's
behavior without changing the plpgsql function, but that one seems
like the only one people would be likely to hit in practice.)
The most foolproof way to fix this would be to arrange for
exec_prepare_plan to not set expr->plan until we've finished the
subsidiary simple-expression check. But it seems hard to do that
without creating reference-count leak issues. So settle for documenting
the hazard in a comment and fixing exec_stmt_execsql to test separately
for whether it's computed stmt->mod_stmt. (That adds a test-and-branch
per execution, but hopefully that's negligible in context.) In v11 and
up, also fix exec_stmt_call which had a variant of the same issue.
Per bug #17113 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17113-077605ce00e0e7ec@postgresql.org
This is a revert of 6cea447, that disabled those tests temporarily on
Windows due to failures with bowerbird where gzflush() would fail when
executed on a freshly-opened compressed and partial segment. This
problem should be taken care of now thanks to 7fbe0c8, so let's see what
the buildfarm has to say on Windows for those tests.
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
The logic handling the opening of new WAL segments was fuzzy when using
--compress if a partial, non-compressed, segment with the same base name
existed in the repository storing those files. In this case, using
--compress would cause the code to first check for the existence and the
size of a non-compressed segment, followed by the opening of a new
compressed, partial, segment. The code was accidentally working
correctly on most platforms as the buildfarm has proved, except
bowerbird where gzflush() could fail in this code path. It is wrong
anyway to take the code path used pre-padding when creating a new
partial, non-compressed, segment, so let's fix it.
Note that this issue exists when users mix successive runs of
pg_receivewal with or without compression, as discovered with the tests
introduced by ffc9dda.
While on it, this refactors the code so as code paths that need to know
about the ".gz" suffix are down from four to one in walmethods.c, easing
a bit the introduction of new compression methods. This addresses a
second issue where log messages generated for an unexpected failure
would not show the compressed segment name involved, which was
confusing, printing instead the name of the non-compressed equivalent.
Reported-by: Georgios Kokolatos
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
Backpatch-through: 10
Commit 3499df0d added a comment that incorrectly suggested that
--force-index-cleanup did not appear in the same major version as the
similar --no-index-cleanup option. In fact, both options are new to
PostgreSQL 14.
Backpatch: 14-, where both options were introduced.
No concrete problem reported, but in the past it's been known to cause
problems on some compilers so let's avoid doing that.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/234364.1626704007%40sss.pgh.pa.us
We don't allow to create replication slot_name as an empty string ('') via
SQL API pg_create_logical_replication_slot() but it is allowed to be set
via Alter Subscription command. This will lead to apply worker repeatedly
keep trying to stream data via slot_name '' and the user is not allowed to
create the slot with that name.
Author: Japin Li
Reviewed-By: Ranier Vilela, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB1669CBD98E721C77CA696499B61A9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
A couple of open flags used in an assertion didn't exist in macOS 10.4.
Per build farm animal prairiedog. Also add O_EXCL while here (there are
a few more standard flags but they're not relevant and likely to be
missing).
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
Check for conflicting or redundant options, as we do for most other
commands. Specifying any option more than once is at best redundant,
and quite likely indicates a bug in the user's code.
While at it, improve the error for conflicting locale options by
adding detail text (the same as for CREATE DATABASE).
Bharath Rupireddy, reviewed by Vignesh C. Some additional hacking by
me.
Discussion: https://postgr.es/m/CALj2ACWtL6fTLdyF4R_YkPtf1YEDb6FUoD5DGAki3rpD+sWqiA@mail.gmail.com
The new test code added in ead9e51e82 is racy -- it hinges on
shared-memory state, which changes before the WARNING message is logged.
Put it the other way around.
Backpatch to 13.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202107161809.zclasccpfcg3@alvherre.pgsql
pg_dump failed to preserve the 'enabled' flag (which can be not only
disabled, but also REPLICA or ALWAYS) for partitions which had it
changed from their respective parents. Attempt to handle that by
including a definition for such triggers in the dump, but replace the
standard CREATE TRIGGER line with an ALTER TRIGGER line.
Backpatch to 11, where these triggers can exist. In branches 11 and 12,
pick up a few test lines from commit b9b408c487 to verify that
pg_upgrade is okay with these arrangements.
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
As reported by buildfarm member bowerbird, those tests are unstable on
Windows. The failure produced there points to a problem with gzflush(),
that fails to sync a file freshly-opened, with a gzFile properly
opened. While testing this myself with MSVC, I bumped into a different
error where a file could simply not be opened, so this makes me rather
doubtful that testing this area on Windows is a good idea if this
finishes with random concurrency failures. This requires more
investigation, and keeping this buildfarm member red is not a good thing
in the long-term, so for now this just disables this set of tests on
Windows.
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
Autoconf's AC_CHECK_DECLS() always defines HAVE_DECL_whatever
as 1 or 0, but some of the entries in msvc/Solution.pm showed
such symbols as "undef" instead of 0. Fix that for consistency.
There's no live bug in current usages AFAICS, but it's not hard
to imagine one creeping in if more-complex #if tests get added.
Back-patch to v13, which is as far back as Solution.pm contains
this data. The inconsistency still exists in the manually-filled
pg_config_ext.h.win32 files of older branches; but as long as the
problem is only latent, it doesn't seem worth the trouble to
clean things up there.
Discussion: https://postgr.es/m/3185430.1626133592@sss.pgh.pa.us
The OpenBSD implementation of gzip considers only files suffixed by "Z",
"gz", "z", "tgz" or "taz" as valid targets, discarding anything else and
making a command using --test exit with an error code of 512 if anything
invalid is found. The test introduced in ffc9dda tested a WAL segment
suffixed as .gz.partial, enough to make the test fail.
Testing only a full segment is fine enough in terms of coverage, so
simplify the code by discarding the .gz.partial segment in this check.
This should be enough to make the test pass with OpenBSD environments.
Per report from curculio.
Discussion: https://postgr.es/m/YPAdf9r5aJbDoHoq@paquier.xyz
This commit fixes the description of a couple of multirange operators and
oprjoin for another multirange operator. The change of oprjoin is more
cosmetic since both old and new functions return the same constant.
These cosmetic changes don't worth catalog incompatibility between 14beta2
and 14beta3. So, catversion isn't bumped.
Discussion: https://postgr.es/m/CAPpHfdv9OZEuZDqOQoUKpXhq%3Dmc-qa4gKCPmcgG5Vvesu7%3Ds1w%40mail.gmail.com
Backpatch-throgh: 14
When reporting "conflicting or redundant options" errors, try to
ensure that errposition() is used, to help the user identify the
offending option.
Formerly, errposition() was invoked in less than 60% of cases. This
patch raises that to over 90%, but there remain a few places where the
ParseState is not readily available. Using errdetail() might improve
the error in such cases, but that is left as a task for the future.
Additionally, since this error is thrown from over 100 places in the
codebase, introduce a dedicated function to throw it, reducing code
duplication.
Extracted from a slightly larger patch by Vignesh C. Reviewed by
Bharath Rupireddy, Alvaro Herrera, Dilip Kumar, Hou Zhijie, Peter
Smith, Daniel Gustafsson, Julien Rouhaud and me.
Discussion: https://postgr.es/m/CALDaNm33FFSS5tVyvmkoK2cCMuDVxcui=gFrjti9ROfynqSAGA@mail.gmail.com
There is a non-trivial amount of code that handles ZLIB compression in
pg_receivewal, from basics like the format name, the calculation of the
start streaming position and of course the compression itself, but there
was no automated coverage for it.
This commit introduces a set of conditional tests (if the build supports
ZLIB) to cover the creation of ZLIB-compressed WAL segments, the
handling of the partial, compressed, WAL segments and the compression
operation in itself. Note that there is an extra phase checking the
validity of the generated files by using directly a gzip command, passed
down by the Makefile of pg_receivewal. This part is skipped if the
command cannot be found, something likely going to happen on Windows
with MSVC except if one sets the variable GZIP_PROGRAM in the
environment of the test.
This set of tests will become handy for upcoming patches that add more
options for the compression methods used by pg_receivewal, like LZ4, to
make sure that no existing facilities are broken.
Author: Georgios Kokolatos
Reviewed-by: Gilles Darold, Michael Paquier
Discussion: https://postgr.es/m/07BK3Mk5aEOsTwGaY77qBVyf9GjoEzn8TMgHLyPGfEFPIpTEmoQuP2P4c7teesjSg-LPeUafsp1flnPeQYINMSMB_UpggJDoduB5EDYBqaQ=@protonmail.com
Build farm animals running ancient HPUX and Solaris have a non-standard
sigwait() from draft versions of POSIX, so they didn't like commit
7c09d279. To avoid the problem in general, only try to use sigwait() if
it's declared by <signal.h> and matches the expected declaration. To
select the modern declaration on Solaris (even in non-threaded
programs), move -D_POSIX_PTHREAD_SEMANTICS into the right place to
affect all translation units.
Also fix the error checking. Modern sigwait() doesn't set errno.
Thanks to Tom Lane for help with this.
Discussion: https://postgr.es/m/3187588.1626136248%40sss.pgh.pa.us
This allows Param substitution to produce just the same result
as writing a constant value literally would have done. While
it hardly matters so far as the current core code is concerned,
extensions might take more interest in node location fields.
Julien Rouhaud
Discussion: https://postgr.es/m/20170311220932.GJ15188@nol.local
Commit 0563a3a8b changed how partition constraints were generated such
that this function no longer computes the mapping of parent attnos to
child attnos.
This is an external function that extensions could use, so this is
potentially a breaking change. No external callers are known, however,
and this will make it simpler to write such callers in the future.
Author: Hou Zhijie
Reviewed-by: David Rowley, Michael Paquier, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/flat/OS0PR01MB5716A75A45BE46101A1B489894379@OS0PR01MB5716.jpnprd01.prod.outlook.com
Previously, we would send each line as a separate CopyData message.
That's pretty wasteful if the table is narrow, as each CopyData message
has 5 bytes of overhead. For efficiency, buffer up and pack 8 kB of
input data into each CopyData message.
The server also sends each line as a separate CopyData message in COPY TO
STDOUT, and that's similarly wasteful. But that's documented in the FE/BE
protocol description, so changing that would be a wire protocol break.
Reviewed-by: Aleksander Alekseev
Discussion: https://www.postgresql.org/message-id/40b2cec0-d0fb-3191-2ae1-9a3fe16a7e48%40iki.fi
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The internals of the frontend-side callbacks for SASL are visible in
libpq-int.h, but the header was not getting installed. This would cause
compilation failures for applications playing with the internals of
libpq.
Issue introduced in 9fd8557.
Author: Mikhail Kulagin
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/05ce01d777cb$40f31d60$c2d95820$@postgrespro.ru
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
There's no point in checking if an INT8 sequence has a seqmin and seqmax
value is outside the range of the minimum and maximum values for an int64
type. These both use the same underlying types so an INT8 certainly
cannot be outside the minimum and maximum values supported by int64.
This code is fairly harmless and it seems likely that most compilers
would optimize it out anyway, never-the-less, let's remove it replacing
it with a small comment to mention why the check is not needed.
Author: Greg Nancarrow, with the comment revised by David Rowley
Discussion: https://postgr.es/m/CAJcOf-c9KBUZ8ow_6e%3DWSfbbEyTKfqV%3DVwoFuODQVYMySHtusw%40mail.gmail.com
41469253e went to the trouble of removing a theoretical bug from
free_sort_tuple by checking if the tuple was NULL before freeing it. Let's
make this a little more robust by also setting the tuple to NULL so that
should we be called again we won't end up doing a pfree on the already
pfree'd tuple. Per advice from Tom Lane.
Discussion: https://postgr.es/m/3188192.1626136953@sss.pgh.pa.us
Backpatch-through: 9.6, same as 41469253e
This fixes a theoretical bug in tuplesort.c which, if a bounded sort was
used in combination with a byval Datum sort (tuplesort_begin_datum), when
switching the sort to a bounded heap in make_bounded_heap(), we'd call
free_sort_tuple(). The problem was that when sorting Datums of a byval
type, the tuple is NULL and free_sort_tuple() would free the memory for it
regardless of that. This would result in a crash.
Here we fix that simply by adding a check to see if the tuple is NULL
before trying to disassociate and free any memory belonging to it.
The reason this bug is only theoretical is that nowhere in the current
code base do we do tuplesort_set_bound() when performing a Datum sort.
However, let's backpatch a fix for this as if any extension uses the code
in this way then it's likely to cause problems.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/CAApHDvpdoqNC5FjDb3KUTSMs5dg6f+XxH4Bg_dVcLi8UYAG3EQ@mail.gmail.com
Backpatch-through: 9.6, oldest supported version
Allow a pager to be used by the \watch command. This works but isn't
very useful with traditional pagers like "less", so use a different
environment variable. The popular open source tool "pspg" (also by
Pavel) knows how to display the output if you set PSQL_WATCH_PAGER="pspg
--stream".
To make \watch react quickly when the user quits the pager or presses
^C, and also to increase the accuracy of its timing and decrease the
rate of useless context switches, change the main loop of the \watch
command to use sigwait() rather than a sleeping/polling loop, on Unix.
Supported on Unix only for now (like pspg).
Author: Pavel Stehule <pavel.stehule@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRBfzUUPz-3gN5oAzto9SDuRSq-TQPfXU_P6h0L7hO%2BEhg%40mail.gmail.com
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
This should have been removed in commit 7e30c186da, which split the loop
into two. Only the first loop uses the 'from' variable; updating it in
the second loop is bogus. It was never read after the first loop, so this
was harmless and surely optimized away by the compiler, but let's be tidy.
Backpatch to all supported versions.
Author: Ranier Vilela
Discussion: https://www.postgresql.org/message-id/CAEudQAoWq%2BAL3BnELHu7gms2GN07k-np6yLbukGaxJ1vY-zeiQ%40mail.gmail.com
This reverts commit 54fb8c7, as per the issues reported by fairywren
when it comes to MinGW because of the lack of microsoft_native_stat()
there. Using just stat() for MSVC is not sufficient to take care of the
concurrency problems with files pending on deletion. It may be possible
to paint some __MINGW64__ in the code to switch to a different
implementation of stat() in this build context, but I am not sure either
if relying on the implementation of stat() in MinGW to take care of the
problems we are trying to fix is enough or not. So this needs more
study.
Discussion: https://postgr.es/m/YOvOlfRrIO0yGtgw@paquier.xyz
Backpatch-through: 14
The code introduced by bed9075 to enhance the stat() implementation on
Windows for file sizes larger than 4GB fails to properly detect files
pending for deletion with its method based on NtQueryInformationFile()
or GetFileInformationByHandleEx(), as proved by Alexander Lakhin in a
custom TAP test of his own.
The method used in the implementation of open() to sleep and loop when
when failing on ERROR_ACCESS_DENIED (EACCES) is showing much more
stability, so switch to this method. This could still lead to issues if
the permission problem stays around for much longer than the timeout of
1 second used, but that should (hopefully) never happen in
performance-critical paths. Still, there could be a point in increasing
the timeouts for the sake of machines that handle heavy loads.
Note that WIN32's open() now uses microsoft_native_stat() as it should
be similar to stat() when working around issues with concurrent file
deletions.
I have spent some time testing this patch with pgbench in combination
of the SQL functions from genfile.c, as well as running the TAP test
provided on the thread with MSVC builds, and this looks much more
stable than the previous method.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/c3427edf-d7c0-ff57-90f6-b5de3bb62709@gmail.com
Backpatch-through: 14
Daniel Gustafsson
John Naylor
Michael Paquier
Tom Lane
Peter Eisentraut
Andres Freund
Michael Meskes
David Rowley
Thomas Munro
Tomas Vondra
Heikki Linnakangas
Amit Kapila
Dean Rasheed
Fujii Masao
Peter Geoghegan
Bruce Momjian
Etsuro Fujita
Andrew Dunstan
Jeff Davis
Robert Haas
Alvaro Herrera
Alexander Korotkov