The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
didn't actually work, because nodeRecursiveunion.c creates the underlying
tuplestore with backward scan disabled; which is a decision that we shouldn't
reverse because of performance cost. We could imagine adding signaling from
WorkTableScan to RecursiveUnion about whether backward scan is needed ...
but in practice it'd be a waste of effort, because there simply isn't any
current or plausible future scenario where WorkTableScan would be called on
to scan backward. So just dike out the code that claims to support it.
scanning; GiST and GIN do not, and it seems like too much trouble to make
them do so. By teaching ExecSupportsBackwardScan() about this restriction,
we ensure that the planner will protect a scroll cursor from the problem
by adding a Materialize node.
In passing, fix another longstanding bug in the same area: backwards scan of
a plan with set-returning functions in the targetlist did not work either,
since the TupFromTlist expansion code pays no attention to direction (and
has no way to run a SRF backwards anyway). Again the fix is to make
ExecSupportsBackwardScan check this restriction.
Also adjust the index AM API specification to note that mark/restore support
is unnecessary if the AM can't produce ordered output.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
would work, but in fact it didn't return the same rows when moving backwards
as when moving forwards. This would have no visible effect in a DISTINCT
query (at least assuming the column datatypes use a strong definition of
equality), but it gave entirely wrong answers for DISTINCT ON queries.
filter to be used when INSERT or SELECT INTO has a plan that returns raw
disk tuples. The virtual-tuple-slot optimizations that were put in place
awhile ago mean that ExecInsert has to do ExecMaterializeSlot, and that
already copies the tuple if it's raw (and does so more efficiently than
a junk filter, too). So get rid of that logic. This in turn means that
we can throw away ExecMayReturnRawTuples, which wasn't used for any other
purpose, and was always a kluge anyway.
In passing, move a couple of SELECT-INTO-specific fields out of EState
and into the private state of the SELECT INTO DestReceiver, as was foreseen
in an old comment there. Also make intorel_receive use ExecMaterializeSlot
not ExecCopySlotTuple, for consistency with ExecInsert and to possibly save
a tuple copy step in some cases.
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
plan nodes, so that the executor does not need to get these items from
the range table at runtime. This will avoid needing to include these
fields in the compact range table I'm expecting to make the executor use.
WHERE clauses. createplan.c is now willing to stick a gating Result node
almost anywhere in the plan tree, and in particular one can wind up directly
underneath a MergeJoin node. This means it had better be willing to handle
Mark/Restore. Fortunately, that's trivial in such cases, since we can just
pass off the call to the input node (which the planner has previously ensured
can handle Mark/Restore). Per report from Phil Frost.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
shut down cleanly if the plan node is ReScanned before the SRFs are run
to completion. This fixes the problem for SQL-language functions, but
still need work on functions using the SRF_XXX() macros.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
Robert Haas
Bruce Momjian
Tom Lane
Joe Conway
PostgreSQL Daemon
Neil Conway