If the first transaction block in these tests were entered exactly
at midnight (California time), they'd report a bogus failure due
to 'now' and 'midnight' having the same values. Commit 8c2ac75c5
had dismissed this as being of negligible probability, but we've
now seen it happen in the buildfarm, so let's prevent it. We can
get pretty much the same test coverage without an it's-not-midnight
assumption by moving the does-'now'-work cases into their own test step.
While here, apply commit 47169c255's s/DELETE/TRUNCATE/ change to
timestamptz as well as timestamp (not sure why that didn't
occur to me at the time; the risk of failure is the same).
Back-patch to all supported branches, since the main point is
to get rid of potential buildfarm failures.
Discussion: https://postgr.es/m/14821.1577031117@sss.pgh.pa.us
The DTK_DOW/DTK_ISODOW and DTK_DOY switch cases in timestamp_part() and
timestamptz_part() contained calls of timestamp2tm() that were fully
redundant with the ones done just above the switch. This evidently crept
in during commit 258ee1b63, which relocated that code from another place
where the calls were indeed needed. Just delete the redundant calls.
I (tgl) noted that our test coverage of these functions left quite a
bit to be desired, so extend timestamp.sql and timestamptz.sql to
cover all the branches.
Back-patch to all supported branches, as the previous commit was.
There's no real issue here other than some wasted cycles in some
not-too-heavily-used code paths, but the test coverage seems valuable.
Report and patch by Li Japin; test case adjustments by me.
Discussion: https://postgr.es/m/SG2PR06MB37762CAE45DB0F6CA7001EA9B6550@SG2PR06MB3776.apcprd06.prod.outlook.com
SQL Standard 2016 defines FF1-FF9 format patters for fractions of seconds in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. Parsing
engine of upcoming .datetime() method will be shared with to_date()/
to_timestamp().
This patch implements FF1-FF6 format patterns for upcoming jsonpath .datetime()
method. to_date()/to_timestamp() functions will also get support of this
format patterns as positive side effect. FF7-FF9 are not supported due to
lack of precision in our internal timestamp representation.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
The date/time values 'current', 'invalid', and 'undefined' were
removed a long time ago, but the code still contains explicit error
handling for the transition. To simplify the code and avoid having to
handle these values everywhere, just remove the recognition of these
tokens altogether now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
date_trunc(field, timestamptz, zone_name) performs truncation using
the named time zone as reference, rather than working in the session
time zone as is the default behavior. It's equivalent to
date_trunc(field, timestamptz at time zone zone_name) at time zone zone_name
but it's faster, easier to type, and arguably easier to understand.
Vik Fearing and Tom Lane
Discussion: https://postgr.es/m/6249ffc4-2b22-4c1b-4e7d-7af84fedd7c6@2ndquadrant.com
These are compatible with Oracle and required for the datetime template
language for jsonpath in an upcoming patch.
Nikita Glukhov and Andrew Dunstan, reviewed by Pavel Stehule.
The IANA timezone crew continues to chip away at their project of removing
timezone abbreviations that have no real-world currency from their
database. The tzdata2017a update removes all such abbreviations for
South American zones, as well as much of the Pacific. This breaks some
test cases in timestamptz.sql that were expecting America/Santiago and
America/Caracas to have non-numeric abbreviations.
The test cases involving America/Santiago seem to have selected that
zone more or less at random, so just replace it with America/New_York,
which is of similar longitude. The cases involving America/Caracas are
harder since they were chosen to test a time-varying zone abbreviation
around a point where it changed meaning in the backwards direction.
Fortunately, Europe/Moscow has a similar case in 2014, and the MSK/MSD
abbreviations are well enough attested that IANA seems unlikely to
decide to remove them from the database in future.
With these changes, this regression test should pass when using any IANA
zone database from 2015 or later. One could wish that there were a few
years more daylight on how out-of-date your zone database can be ... but
really the --with-system-tzdata option is only meant for use on platforms
where the zone database is kept up-to-date pretty faithfully, so I do not
think this is a big objection.
Discussion: https://postgr.es/m/6749.1489087470@sss.pgh.pa.us
Quite a few of our built-in system views were not exercised anywhere
in the regression tests. This is perhaps not so exciting for the ones
that are simple projections/joins of system catalogs, but for the ones
that are wrappers for set-returning C functions, the omission translates
directly to lack of test coverage for those functions.
In many cases, the reason for the omission is that the view doesn't have
much to do with any specific SQL feature, so there's no natural place to
test it. To remedy that, invent a new script sysviews.sql that's dedicated
to testing SRF-based views. Move a couple of tests that did fit this
charter into the new script, and add simple "count(*)" based tests of
other views within the charter. That's enough to ensure we at least
exercise the main code path through the SRF, although it does little to
prove that the output is sane.
More could be done here, no doubt, and I hope someone will think about
how we can test these views more thoroughly. But this is a starting
point.
Discussion: https://postgr.es/m/19359.1485723741@sss.pgh.pa.us
These resulted in wrong answers if the relabeled argument could be matched
to an index column, as shown in bug #14504 from Evgeniy Kozlov. We might
be able to resurrect these optimizations by adjusting the planner's
treatment of RelabelType, or by adjusting btree's rules for selecting
comparison functions, but either solution will take careful analysis
and does not sound like a fit candidate for backpatching.
I left the catalog infrastructure in place and just reduced the transform
functions to always-return-NULL. This would be necessary anyway in the
back branches, and it doesn't seem important to be more invasive in HEAD.
Bug introduced by commit b8a18ad48. Back-patch to 9.5 where that came in.
Report: https://postgr.es/m/20170118144828.1432.52823@wrigleys.postgresql.org
Discussion: https://postgr.es/m/18771.1484759439@sss.pgh.pa.us
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
Reporting the specific out-of-range input value produces platform-dependent
results. We could skip reporting the value, but that's contrary to our
message style guidelines and unhelpful to users. Or we could add a
separate expected-output file for Windows, but that would be a substantial
maintenance burden, and these test cases seem unlikely to be worth it.
Per buildfarm.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
America/Metlakatla hasn't been in the IANA database all that long, so
some installations might not have it. It does seem worthwhile to test
with a fractional-minute GMT offset, but we can get that from almost
any pre-1900 date; I chose Europe/Paris, whose LMT offset from Greenwich
should be pretty darn well established.
Also, assuming that Mars/Mons_Olympus will never be in the IANA database
seems less than future-proof, so let's use a more fanciful location for
the bad-zone-name check.
Per complaint from Christoph Berg.
Author: Pavel Stěhule, editorialized somewhat by Álvaro Herrera
Reviewed-by: Tomáš Vondra, Marko Tiikkaja
With input from Fabrízio de Royes Mello, Jim Nasby
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
this adds support for 64-bit tzdata files, which is needed to support DST
calculations beyond 2038. Add a regression test case to give some minimal
confidence that that really works.
Heikki Linnakangas
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
time zones.
SQL99 spec requires a default of zero (round to seconds) which is set
in gram.y as typmod is set in the parse tree. We *could* change to a
default of either 6 (for internal compatibility with previous versions)
or 2 (for external compatibility with previous versions).
Evaluate entries in pg_proc wrt the iscachable attribute for timestamp and
other date/time types. Try to recognize cases where side effects like the
current time zone setting may have an effect on results to decide whether
something is cachable or not.
Tom Lane
Alexander Korotkov
Peter Eisentraut
Andrew Dunstan
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
Thomas G. Lockhart