If we merge the transition calculations for two different aggregates,
it's reasonable to assume that the transition function should not care
which of those Aggref structs it gets from AggGetAggref(). It is not
reasonable to make the same assumption about an aggregate final function,
however. Commit 804163bc2 broke this, as it will pass whichever Aggref
was first associated with the transition state in both cases.
This doesn't create an observable bug so far as the core system is
concerned, because the only existing uses of AggGetAggref() are in
ordered-set aggregates that happen to not pay attention to anything
but the input properties of the Aggref; and besides that, we disabled
sharing of transition calculations for OSAs yesterday. Nonetheless,
if some third-party code were using AggGetAggref() in a normal aggregate,
they would be entitled to call this a bug. Hence, back-patch the fix
to 9.6 where the problem was introduced.
In passing, improve some of the comments about transition state sharing.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
This ought to work, but the built-in OSAs are not capable of coping,
because their final-functions destructively modify their transition
state (specifically, the contained tuplesort object). That was fine
when those functions were written, but commit 804163bc2 moved the
goalposts without telling orderedsetaggs.c.
We should fix the built-in OSAs to support this, but it will take
a little work, especially if we don't want to sacrifice performance
in the normal non-shared-state case. Given that it took a year after
9.6 release for anyone to notice this bug, we should not prioritize
sharable-state over nonsharable-state performance. And a proper fix
is likely to be more complicated than we'd want to back-patch, too.
Therefore, let's just put in this stop-gap patch to prevent nodeAgg.c
from choosing to use shared state for OSAs. We can revert it in HEAD
when we get a better fix.
Report from Lukas Eder, diagnosis by me, patch by David Rowley.
Back-patch to 9.6 where the problem was introduced.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
It appears some versions of msvc use __declspec(restrict) in stdlib.h
and subsidiary headers. Including those after defining 'restrict' to
'__restrict' doesn't work. Try to get the buildfarm green to see
whether there's further problems, by including stdlib.h just before
said define.
Apparently MSVC requires a * before a restrict in a variable
declaration, even if the adorned type already is a pointer, just via
typedef.
As reported by buildfarm animal woodlouse.
Author: Andres Freund
Discussion: https://postgr.es/m/20171012001320.4putagiruuehtvb6@alap3.anarazel.de
There's three categories of changes leading to better performance:
- Splitting the per-attribute part of SendRowDescriptionMessage into a
v2 and a v3 version allows avoiding branches for every attribute.
- Preallocating the size of the buffer to be big enough for all
attributes and then using pq_write* avoids unnecessary buffer
size checks & resizing.
- Reusing a persistently allocated StringInfo for all
SendRowDescriptionMessage() invocations avoids repeated allocations
& reallocations.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
This takes advantage of the infrastructure introduced by commit
81c5e46c49 to greatly reduce the
likelihood that two different queries will end up with the same query
ID. It's still possible, of course, but whereas before it the chances
of a collision reached 25% around 50,000 queries, it will now take
more than 3 billion queries.
Backward incompatibility: Because the type exposed at the SQL level is
int8, users may now see negative query IDs in the pg_stat_statements
view (and also, query IDs more than 4 billion, which was the old
limit).
Patch by me, reviewed by Michael Paquier and Peter Geoghegan.
Discussion: http://postgr.es/m/CA+TgmobG_Kp4cBKFmsznUAaM1GWW6hhRNiZC0KjRMOOeYnz5Yw@mail.gmail.com
This avoids newly allocating, and then possibly growing, the
stringbuffer for every row. For wide rows this can substantially
reduce memory allocator overhead, at the price of not immediately
reducing memory usage after outputting an especially wide row.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
There's three prongs to achieve greater efficiency here:
1) Allow reusing a stringbuffer across pq_beginmessage/endmessage,
with the new pq_beginmessage_reuse/endmessage_reuse. This can be
beneficial both because it avoids allocating the initial buffer,
and because it's more likely to already have an correctly sized
buffer.
2) Replacing pq_sendint() with pq_sendint$width() inline
functions. Previously unnecessary and unpredictable branches in
pq_sendint() were needed. Additionally the replacement functions
are implemented more efficiently. pq_sendint is now deprecated, a
separate commit will convert all in-tree callers.
3) Add pq_writeint$width(), pq_writestring(). These rely on sufficient
space in the StringInfo's buffer, avoiding individual space checks
& potential individual resizing. To allow this to be used for
strings, expose mbutil.c's MAX_CONVERSION_GROWTH.
Followup commits will make use of these facilities.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
In a lot of the places having appendBinaryStringInfo() maintain a
trailing NUL byte wasn't actually meaningful, e.g. when appending an
integer which can contain 0 in one of its bytes.
Removing this yields some small speedup, but more importantly will be
more consistent when providing faster variants of pq_sendint etc.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
Will be used in later commits improving performance for a few key
routines where information about aliasing allows for significantly
better code generation.
This allows to use the C99 'restrict' keyword without breaking C89, or
for that matter C++, compilers. If not supported it's defined to be
empty.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
resowner/README contained advice to use a PG_TRY block to restore the
old CurrentResourceOwner value anywhere that that variable is transiently
changed. That advice was only inconsistently followed, however, and
on reflection it seems like unnecessary overhead. We don't bother
with such a convention for transient CurrentMemoryContext changes,
on the grounds that any (sub)transaction abort will start out by
resetting CurrentMemoryContext to what it wants. But the same is
true of CurrentResourceOwner, so there seems no need to treat it
differently.
Hence, remove PG_TRY blocks that exist only to restore CurrentResourceOwner
before re-throwing the error. There are a couple of places that restore
it along with some other actions, and I left those alone; the restore is
probably unnecessary but no noticeable gain will result from removing it.
Discussion: https://postgr.es/m/5236.1507583529@sss.pgh.pa.us
The previous coding in ProcessInterrupts() could lead to
idle_in_transaction_session_timeout being ignored, when
statement_timeout occurred earlier.
The problem was that ProcessInterrupts() would return before
processing the transaction timeout if QueryCancelPending was set while
QueryCancelHoldoffCount != 0 - which is the case when reading new
commands from the client. Ergo when the idle transaction timeout would
hit.
Fix that by removing the early return. Alternatively the transaction
timeout code could have been moved up, but that early return seems
like an issue that could hit other cases too.
Author: Lukas Fittl
Bug: #14821
Discussion:
https://www.postgresql.org/message-id/20170921010956.17345.61461%40wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAP53PkxQnv3OWJpyNPGJYT62uY=n1=2CF_Lpc6gVOFnc0-gazw@mail.gmail.com
Backpatch: 9.6-, where idle_in_transaction_session_timeout was introduced.
The GRANT reference page, which lists the default privileges for new
objects, failed to mention that USAGE is granted by default for data
types and domains. As a lesser sin, it also did not specify anything
about the initial privileges for sequences, FDWs, foreign servers,
or large objects. Fix that, and add a comment to acldefault() in the
probably vain hope of getting people to maintain this list in future.
Noted by Laurenz Albe, though I editorialized on the wording a bit.
Back-patch to all supported branches, since they all have this behavior.
Discussion: https://postgr.es/m/1507620895.4152.1.camel@cybertec.at
Up to now async.c has used TransactionIdIsInProgress() to detect whether
a notify message's source transaction is still running. However, that
function has a quick-exit path that reports that XIDs before RecentXmin
are no longer running. If a listening backend is doing nothing but
listening, and not running any queries, there is nothing that will advance
its value of RecentXmin. Once 2 billion transactions elapse, the
RecentXmin check causes active transactions to be reported as not running.
If they aren't committed yet according to CLOG, async.c decides they
aborted and discards their messages. The timing for that is a bit tight
but it can happen when multiple backends are sending notifies concurrently.
The net symptom therefore is that a sufficiently-long-surviving
listen-only backend starts to miss some fraction of NOTIFY traffic,
but only under heavy load.
The only function that updates RecentXmin is GetSnapshotData().
A brute-force fix would therefore be to take a snapshot before
processing incoming notify messages. But that would add cycles,
as well as contention for the ProcArrayLock. We can be smarter:
having taken the snapshot, let's use that to check for running
XIDs, and not call TransactionIdIsInProgress() at all. In this
way we reduce the number of ProcArrayLock acquisitions from one
per message to one per notify interrupt; that's the same under
light load but should be a benefit under heavy load. Light testing
says that this change is a wash performance-wise for normal loads.
I looked around for other callers of TransactionIdIsInProgress()
that might be at similar risk, and didn't find any; all of them
are inside transactions that presumably have already taken a
snapshot.
Problem report and diagnosis by Marko Tiikkaja, patch by me.
Back-patch to all supported branches, since it's been like this
since 9.0.
Discussion: https://postgr.es/m/20170926182935.14128.65278@wrigleys.postgresql.org
The previous placement of the fallback implementation in libpgcommon
was problematic, because libpqport functions need strnlen
functionality.
Move replacement into libpgport. Provide strnlen() under its posix
name, instead of pg_strnlen(). Fix stupid configure bug, executing the
test only when compiled with threading support.
Author: Andres Freund
Discussion: https://postgr.es/m/E1e1gR2-0005fB-SI@gemulon.postgresql.org
I noticed the tmp_check subdirectory wasn't getting cleaned up
after a check-world run. Apparently pgxs.mk will only do this
for you if you've defined REGRESS. The only other src/test/modules
Makefile that does not set that is snapshot_too_old, and it
does it like this.
Previously nodeProjectSet only released memory once per input tuple,
rather than once per returned tuple. If the computation of an
individual returned tuple requires a lot of memory, that can lead to
problems.
Instead change things so that the expression context can be reset once
per output tuple, which requires a new memory context to store SRF
arguments in.
This is a longstanding issue, but was hard to fix before 9.6, due to
the way tSRFs where evaluated. But it's fairly easy to fix now. We
could backpatch this into 10, but given there've been fewc omplaints
that doesn't seem worth the risk so far.
Reported-By: Lucas Fairchild
Author: Andres Freund, per discussion with Tom Lane
Discussion: https://postgr.es/m/4514.1507318623@sss.pgh.pa.us
copy_file() reads and writes data 64KB at a time (with default BLCKSZ),
and historically has issued a pg_flush_data request after each write.
This turns out to interact really badly with macOS's new APFS file
system: a large file copy takes over 100X longer than it ought to on
APFS, as reported by Brent Dearth. While that's arguably a macOS bug,
it's not clear whether Apple will do anything about it in the near
future, and in any case experimentation suggests that issuing flushes
a bit less often can be helpful on other platforms too.
Hence, rearrange the logic in copy_file() so that flush requests are
issued once per N writes rather than every time through the loop.
I set the FLUSH_DISTANCE to 32MB on macOS (any less than that still
results in a noticeable speed degradation on APFS), but 1MB elsewhere.
In limited testing on Linux and FreeBSD, this seems slightly faster
than the previous code, and certainly no worse. It helps noticeably
on macOS even with the older HFS filesystem.
A simpler change would have been to just increase the size of the
copy buffer without changing the loop logic, but that seems likely
to trash the processor cache without really helping much.
Back-patch to 9.6 where we introduced msync() as an implementation
option for pg_flush_data(). The problem seems specific to APFS's
mmap/msync support, so I don't think we need to go further back.
Discussion: https://postgr.es/m/CADkxhTNv-j2jw2g8H57deMeAbfRgYBoLmVuXkC=YCFBXRuCOww@mail.gmail.com
If the operator is a strict btree equality operator, and X isn't volatile,
then the clause must yield true for any non-null value of X, or null if X
is null. At top level of a WHERE clause, we can ignore the distinction
between false and null results, so it's valid to simplify the clause to
"X IS NOT NULL". This is a useful improvement mainly because we'll get
a far better selectivity estimate in most cases.
Because such cases seldom arise in well-written queries, it is unappetizing
to expend a lot of planner cycles looking for them ... but it turns out
that there's a place we can shoehorn this in practically for free, because
equivclass.c already has to detect and reject candidate equivalences of the
form X = X. That doesn't catch every place that it would be valid to
simplify to X IS NOT NULL, but it catches the typical case. Working harder
doesn't seem justified.
Patch by me, reviewed by Petr Jelinek
Discussion: https://postgr.es/m/CAMjNa7cC4X9YR-vAJS-jSYCajhRDvJQnN7m2sLH1wLh-_Z2bsw@mail.gmail.com
The previous coding here trashed the line buffer as it scanned it,
making it impossible to print the source line in subsequent error
messages. With a few save/restore/strdup pushups we can improve
that situation.
In passing, move the free'ing of the various strings that are collected
while processing one set of tests down to the bottom of the loop.
That's simpler, less surprising, and should make valgrind less unhappy
about the strings that were previously leaked by the last iteration.
We have a very old rule that parallel_schedule should have no more
than twenty tests in any one parallel group, so as to provide a
bound on the number of concurrently running processes needed to
pass the tests. But people keep forgetting the rule, so let's add
a few lines of code to check it.
Discussion: https://postgr.es/m/a37e9c57-22d4-1b82-1270-4501cd2e984e@2ndquadrant.com
The partition_join test was added to a parallel group that was already
at the maximum of 20 concurrent tests. The hash_func test wasn't
added to serial_schedule at all. The identity and partition_join tests
were added to serial_schedule with the aid of a dartboard, rather than
maintaining consistency with parallel_schedule.
There are proposals afoot to make these sorts of errors harder to make,
but in the meantime let's fix the ones already in place.
Discussion: https://postgr.es/m/a37e9c57-22d4-1b82-1270-4501cd2e984e@2ndquadrant.com
The logical decoding functions do BeginInternalSubTransaction and
RollbackAndReleaseCurrentSubTransaction to clean up after themselves.
It turns out that AtEOSubXact_SPI has an unrecognized assumption that
we always need to cancel the active SPI operation in the SPI context
that surrounds the subtransaction (if there is one). That's true
when the RollbackAndReleaseCurrentSubTransaction call is coming from
the SPI-using function itself, but not when it's happening inside
some unrelated function invoked by a SPI query. In practice the
affected callers are the various PLs.
To fix, record the current subtransaction ID when we begin a SPI
operation, and clean up only if that ID is the subtransaction being
canceled.
Also, remove AtEOSubXact_SPI's assertion that it must have cleaned
up the surrounding SPI context's active tuptable. That's proven
wrong by the same test case.
Also clarify (or, if you prefer, reinterpret) the calling conventions
for _SPI_begin_call and _SPI_end_call. The memory context cleanup
in the latter means that these have always had the flavor of a matched
resource-management pair, but they weren't documented that way before.
Per report from Ben Chobot.
Back-patch to 9.4 where logical decoding came in. In principle,
the SPI changes should go all the way back, since the problem dates
back to commit 7ec1c5a86. But given the lack of field complaints
it seems few people are using internal subtransactions in this way.
So I don't feel a need to take any risks in 9.2/9.3.
Discussion: https://postgr.es/m/73FBA179-C68C-4540-9473-71E865408B15@silentmedia.com
Both ExecMakeFunctionResultSet() and evaluation of simple expressions
need to be done in the per-tuple memory context, not per-query, else
we leak data until end of query. This is a consideration that was
missed while refactoring code in the ProjectSet patch (note that in
pre-v10, ExecMakeFunctionResult is called in the per-tuple context).
Per bug #14843 from Ben M. Diagnosed independently by Andres and myself.
Discussion: https://postgr.es/m/20171005230321.28561.15927@wrigleys.postgresql.org
Sloppy loop coding in set_status_by_pages() resulted in fetching one array
element more than it should from the subxids[] array. The odds of this
resulting in SIGSEGV are pretty small, but we've certainly seen that happen
with similar mistakes elsewhere. While at it, we can get rid of an extra
TransactionIdToPage() calculation per loop.
Per report from David Binderman. Back-patch to all supported branches,
since this code is quite old.
Discussion: https://postgr.es/m/HE1PR0802MB2331CBA919CBFFF0C465EB429C710@HE1PR0802MB2331.eurprd08.prod.outlook.com
They are very chatty by default, but the output doesn't seem all that
useful for normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This pg_send_history() call is unreachable, since the block it's in
is currently only entered in !cur_cmd_interactive mode. But rather
than just delete it, make it #ifdef NOT_USED, in hopes that we'll
remember to enable it if we ever change that decision.
Per report from David Binderman. Since this is basically cosmetic,
I see no great need to back-patch.
Discussion: https://postgr.es/m/HE1PR0802MB233122B61F00A15E035C83BE9C710@HE1PR0802MB2331.eurprd08.prod.outlook.com
When some tuple versions in an update chain are frozen due to them being
older than freeze_min_age, the xmax/xmin trail can become broken. This
breaks HOT (and probably other things). A subsequent VACUUM can break
things in more serious ways, such as leaving orphan heap-only tuples
whose root HOT redirect items were removed. This can be seen because
index creation (or REINDEX) complain like
ERROR: XX000: failed to find parent tuple for heap-only tuple at (0,7) in table "t"
Because of relfrozenxid contraints, we cannot avoid the freezing of the
early tuples, so we must cope with the results: whenever we see an Xmin
of FrozenTransactionId, consider it a match for whatever the previous
Xmax value was.
This problem seems to have appeared in 9.3 with multixact changes,
though strictly speaking it seems unrelated.
Since 9.4 we have commit 37484ad2a "Change the way we mark tuples as
frozen", so the fix is simple: just compare the raw Xmin (still stored
in the tuple header, since freezing merely set an infomask bit) to the
Xmax. But in 9.3 we rewrite the Xmin value to FrozenTransactionId, so
the original value is lost and we have nothing to compare the Xmax with.
To cope with that case we need to compare the Xmin with FrozenXid,
assume it's a match, and hope for the best. Sadly, since you can
pg_upgrade a 9.3 instance containing half-frozen pages to newer
releases, we need to keep the old check in newer versions too, which
seems a bit brittle; I hope we can somehow get rid of that.
I didn't optimize the new function for performance. The new coding is
probably a bit slower than before, since there is a function call rather
than a straight comparison, but I'd rather have it work correctly than
be fast but wrong.
This is a followup after 20b6552242 fixed a few related problems.
Apparently, in 9.6 and up there are more ways to get into trouble, but
in 9.3 - 9.5 I cannot reproduce a problem anymore with this patch, so
there must be a separate bug.
Reported-by: Peter Geoghegan
Diagnosed-by: Peter Geoghegan, Michael Paquier, Daniel Wood,
Yi Wen Wong, Álvaro
Discussion: https://postgr.es/m/CAH2-Wznm4rCrhFAiwKPWTpEw2bXDtgROZK7jWWGucXeH3D1fmA@mail.gmail.com
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
If the table attached as a partition is itself partitioned, individual
partitions might have constraints strong enough to skip scanning the
table even if the table actually attached does not. This is pretty
cheap to check, and possibly a big win if it works out.
Amit Langote, with test case changes by me.
Discussion: http://postgr.es/m/1f08b844-0078-aa8d-452e-7af3bf77d05f@lab.ntt.co.jp
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
Tom Lane
Robert Haas
Alvaro Herrera
Andres Freund
Peter Eisentraut