Move the content lock directly into the BufferDesc, so that locking and
pinning a buffer touches only one cache line rather than two. Adjust
the definition of BufferDesc slightly so that this doesn't make the
BufferDesc any larger than one cache line (at least on platforms where
a spinlock is only 1 or 2 bytes).
We can't fit the I/O locks into the BufferDesc and stay within one
cache line, so move those to a completely separate tranche. This
leaves a relatively limited number of LWLocks in the main tranche, so
increase the padding of those remaining locks to a full cache line,
rather than allowing adjacent locks to share a cache line, hopefully
reducing false sharing.
Performance testing shows that these changes make little difference
on laptop-class machines, but help significantly on larger servers,
especially those with more than 2 sockets.
Andres Freund, originally based on an earlier patch by Simon Riggs.
Review and cosmetic adjustments (including heavy rewriting of the
comments) by me.
It's a bit cumbersome to use LWLockNewTrancheId(), because the returned
value needs to be shared between backends so that each backend can call
LWLockRegisterTranche() with the correct ID. So, for built-in tranches,
use a hard-coded value instead.
This is motivated by an upcoming patch adding further built-in tranches.
Andres Freund and Robert Haas
Clarify that SELECT policies are now applied when SELECT rights
are required for a given query, even if the query is an UPDATE or
DELETE query. Pointed out by Noah.
Additionally, note the risk regarding concurrently open transactions
where a relation which controls access to the rows of another relation
are updated and the rows of the primary relation are also being
modified. Pointed out by Peter Geoghegan.
Back-patch to 9.5.
We carry around information about if a given query has row security or
not to allow the plancache to use that information to invalidate a
planned query in the event that the environment changes.
Previously, the flag of one of the subqueries was simply being copied
into place to indicate if the query overall included RLS components.
That's wrong as we need the global OR of all subqueries. Fix by
changing the code to match how fireRIRules works, which is results
in OR'ing all of the flags.
Noted by Tom.
Back-patch to 9.5 where RLS was introduced.
Apparently, there are bugs in this code that cause it to loop endlessly.
That bug still needs more research, but in the meantime it's clear that
the loop is missing a check for interrupts so that it can be cancelled
timely.
Backpatch to 9.1 -- this has been missing since 49475aab8d.
This one test was behaving differently between the ubuntu fix for
CVE-2015-7499 and the base "expected" file. It's not worth having
yet another version of the expected file for this test, so drop it.
Perhaps at some point when all distros have settled down to the
same behavior on this test, it can be restored.
Problem found by me on libxml2 (2.9.1+dfsg1-3ubuntu4.6).
Solution suggested by Tom Lane.
Backpatch to 9.5, where the test was added.
If libpq ran out of memory while constructing the result set, it would hang,
waiting for more data from the server, which might never arrive. To fix,
distinguish between out-of-memory error and not-enough-data cases, and give
a proper error message back to the client on OOM.
There are still similar issues in handling COPY start messages, but let's
handle that as a separate patch.
Michael Paquier, Amit Kapila and me. Backpatch to all supported versions.
Previously, if find_multixact_start() failed, SetOffsetVacuumLimit() would
install 0 into MultiXactState->offsetStopLimit if it previously succeeded.
Luckily, there are no known cases where find_multixact_start() will return
an error in 9.5 and above. But if it were to happen, for example due to
filesystem permission issues, it'd be somewhat bad: GetNewMultiXactId()
could continue allocating mxids even if close to a wraparound, or it could
erroneously stop allocating mxids, even if no wraparound is looming. The
wrong value would be corrected the next time SetOffsetVacuumLimit() is
called, or by a restart.
Reported-By: Noah Misch, although this is not his preferred fix
Discussion: 20151210140450.GA22278@alap3.anarazel.de
Backpatch: 9.5, where the bug was introduced as part of 4f627f
e3f4cfc7 introduced a LWLockHeldByMe() call, without the corresponding
Assert() surrounding it.
Spotted by Coverity.
Backpatch: 9.1+, like the previous commit
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
Commit d5563d7df9 drew complaints from Coverity, which quite
correctly complained that one copy of each -c or -f string was being
leaked. What's more, simple_action_list_append was allocating enough space
for still a third copy of each string as part of the SimpleActionListCell,
even though that coding method had been superseded by a separate strdup
operation. There were some other minor coding infelicities too. The
documentation needed more work as well, eg it forgot to explain that -c
causes psql not to accept any interactive input.
Previously the "sent" field would be set to 0 and all other xlog
pointers be set to NULL if there were no valid values (such as when
in a backup sending walsender).
These would leak random xlog positions if a walsender used for backup would
a walsender slot previously used by a replication walsender.
In passing also fix a couple of cases where the xlog pointer is directly
compared to zero instead of using XLogRecPtrIsInvalid, noted by
Michael Paquier.
Changing the tablespace of an unlogged relation did not WAL log the
creation and content of the init fork. Thus, after a standby is
promoted, unlogged relation cannot be accessed anymore, with errors
like:
ERROR: 58P01: could not open file "pg_tblspc/...": No such file or directory
Additionally the init fork was not synced to disk, independent of the
configured wal_level, a relatively small durability risk.
Investigation of that problem also brought to light that, even for
permanent relations, the creation of !main forks was not WAL logged,
i.e. no XLOG_SMGR_CREATE record were emitted. That mostly turns out not
to be a problem, because these files were created when the actual
relation data is copied; nonexistent files are not treated as an error
condition during replay. But that doesn't work for empty files, and
generally feels a bit haphazard. Luckily, outside init and main forks,
empty forks don't occur often or are not a problem.
Add the required WAL logging and syncing to disk.
Reported-By: Michael Paquier
Author: Michael Paquier and Andres Freund
Discussion: 20151210163230.GA11331@alap3.anarazel.de
Backpatch: 9.1, where unlogged relations were introduced
Recent releases of libxml2 do not provide error context reports for errors
detected at the very end of the input string. This appears to be a bug, or
at least an infelicity, introduced by the fix for libxml2's CVE-2015-7499.
We can hope that this behavioral change will get undone before too long;
but the security patch is likely to spread a lot faster/further than any
follow-on cleanup, which means this behavior is likely to be present in the
wild for some time to come. As a stopgap, add a variant regression test
expected-file that matches what you get with a libxml2 that acts this way.
As reported in bug #13809 by Alexander Ashurkov, the code for REASSIGN
OWNED hadn't gotten word about user mappings. Deal with them in the
same way default ACLs do, which is to ignore them altogether; they are
handled just fine by DROP OWNED. The other foreign object cases are
already handled correctly by both commands.
Also add a REASSIGN OWNED statement to foreign_data test to exercise the
foreign data objects. (The changes are just before the "cleanup" phase,
so it shouldn't remove any existing live test.)
Reported by Alexander Ashurkov, then independently by Jaime Casanova.
DROP OWNED BY handled GRANT-based ACLs but was not removing roles from
policies. Fix that by having DROP OWNED BY remove the role specified
from the list of roles the policy (or policies) apply to, or the entire
policy (or policies) if it only applied to the role specified.
As with ACLs, the DROP OWNED BY caller must have permission to modify
the policy or a WARNING is thrown and no change is made to the policy.
I originally modeled this data structure on SpecialJoinInfo, but after
commit acfcd45cac that looks like a pretty poor decision.
All we really need is relid sets identifying laterally-referenced rels;
and most of the time, what we want to know about includes indirect lateral
references, a case the LateralJoinInfo data was unsuited to compute with
any efficiency. The previous commit redefined RelOptInfo.lateral_relids
as the transitive closure of lateral references, so that it easily supports
checking indirect references. For the places where we really do want just
direct references, add a new RelOptInfo field direct_lateral_relids, which
is easily set up as a copy of lateral_relids before we perform the
transitive closure calculation. Then we can just drop lateral_info_list
and LateralJoinInfo and the supporting code. This makes the planner's
handling of lateral references noticeably more efficient, and shorter too.
Such a change can't be back-patched into stable branches for fear of
breaking extensions that might be looking at the planner's data structures;
but it seems not too late to push it into 9.5, so I've done so.
ALTER POLICY hadn't fully considered partial policy alternation
(eg: change just the roles on the policy, or just change one of
the expressions) when rebuilding the dependencies. Instead, it
would happily remove all dependencies which existed for the
policy and then only recreate the dependencies for the objects
referred to in the specific ALTER POLICY command.
Correct that by extracting and building the dependencies for all
objects referenced by the policy, regardless of if they were
provided as part of the ALTER POLICY command or were already in
place as part of the pre-existing policy.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
This module needs explicit initialization in order to replay WAL records
in recovery, but we had broken this recently following changes to make
other (stranger) scenarios work correctly. To fix, rework the
initialization sequence so that it always takes place before WAL replay
commences for both master and standby.
I could have gone for a more localized fix that just added a "startup"
call for the master server, but it seemed better to restructure the
existing callers as well so that the whole thing made more sense. As a
drawback, there is more control logic in xlog.c now than previously, but
doing otherwise meant passing down the ControlFile flag, which seemed
uglier as a whole.
This also meant adding a check to not re-execute ActivateCommitTs if it
had already been called.
Reported by Fujii Masao.
Backpatch to 9.5.
Complete "ALTER POLICY" with a policy name, as we do for DROP POLICY.
And, complete "ALTER POLICY polname ON" with a table name that has such
a policy, as we do for DROP POLICY, rather than with any table name
at all.
Masahiko Sawada
ExecOnConflictUpdate() passed t_ctid of the to-be-updated tuple to
ExecUpdate(). That's problematic primarily because of two reason: First
and foremost t_ctid could point to a different tuple. Secondly, and
that's what triggered the complaint by Stanislav, t_ctid is changed by
heap_update() to point to the new tuple version. The behavior of AFTER
UPDATE triggers was therefore broken, with NEW.* and OLD.* tuples
spuriously identical within AFTER UPDATE triggers.
To fix both issues, pass a pointer to t_self of a on-stack HeapTuple
instead.
Fixing this bug lead to one change in regression tests, which previously
failed due to the first issue mentioned above. There's a reasonable
expectation that test fails, as it updates one row repeatedly within one
INSERT ... ON CONFLICT statement. That is only possible if the second
update is triggered via ON CONFLICT ... SET, ON CONFLICT ... WHERE, or
by a WITH CHECK expression, as those are executed after
ExecOnConflictUpdate() does a visibility check. That could easily be
prohibited, but given it's allowed for plain UPDATEs and a rare corner
case, it doesn't seem worthwhile.
Reported-By: Stanislav Grozev
Author: Andres Freund and Peter Geoghegan
Discussion: CAA78GVqy1+LisN-8DygekD_Ldfy=BJLarSpjGhytOsgkpMavfQ@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
The original parallel sequential scan commit included only very limited
changes to the EXPLAIN output. Aggregated totals from all workers were
displayed, but there was no way to see what each individual worker did
or to distinguish the effort made by the workers from the effort made by
the leader.
Per a gripe by Thom Brown (and maybe others). Patch by me, reviewed
by Amit Kapila.
The single linked list of memory contexts could result in O(N^2)
performance to free a set of contexts if they were not freed in
reverse order of creation. In many cases the reverse order was
used, but there were some significant exceptions that caused real-
world performance problems. Rather than requiring all callers to
care about the order in which contexts were freed, and hunting down
and changing all existing cases where the wrong order was used, we
add one pointer per memory context so that the implementation
details are not so visible.
Jan Wieck
Commit 344cdff2c made failure to open the target of --output fatal.
For consistency, the --log-file switch should behave similarly.
Like the previous commit, back-patch to 9.5 but no further.
Daniel Verite
For unclear reasons, this function doesn't always read the expected data
in some old Perl versions. Rewriting it to avoid use of ARGV seems to
dodge the problem, and this version is clearer anyway if you ask me.
In passing, also improve error message in adjacent append_to_file function.
To support this, we must reconcile some historical anomalies in the
behavior of -c. In particular, as a backward-incompatibility, -c no
longer implies --no-psqlrc.
Pavel Stehule (code) and Catalin Iacob (documentation). Review by
Michael Paquier and myself. Proposed behavior per Tom Lane.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
While convincing myself that commit 7e19db0c09 would solve both of
the problems recently reported by Andreas Seltenreich, I realized that
add_paths_to_joinrel's handling of LATERAL restrictions could be made
noticeably simpler and faster if we were to retain the minimum possible
parameterization for each joinrel (that is, the set of relids supplying
unsatisfied lateral references in it). We already retain that for
baserels, in RelOptInfo.lateral_relids, so we can use that field for
joinrels too.
I re-pgindent'd the files touched here, which affects some unrelated
comments.
This is, I believe, just a minor optimization not a bug fix, so no
back-patch.
It was possible for the planner to decide to join a LATERAL subquery to
the outer side of an outer join before the outer join itself is completed.
Normally that's fine because of the associativity rules, but it doesn't
work if the subquery contains a lateral reference to the inner side of the
outer join. In such a situation the outer join *must* be done first.
join_is_legal() missed this consideration and would allow the join to be
attempted, but the actual path-building code correctly decided that no
valid join path could be made, sometimes leading to planner errors such as
"failed to build any N-way joins".
Per report from Andreas Seltenreich. Back-patch to 9.3 where LATERAL
support was added.
Noted by Tom Lane:
- PostgresNode had a BEGIN block which created files, contrary to
perlmod suggestions to do that only on INIT blocks.
- Assign ports randomly rather than starting from 90600.
Noted by Noah Misch:
- Change use of no-longer-set PGPORT environment variable to $node->port
- Don't start a server in pg_controldata test
- PostgresNode was reading the PID file incorrectly; test the right
thing, and chomp the line we read from the PID file.
- Remove an unused $devnull variable
- Use 'pg_ctl kill' instead of "kill" directly, for Windos portability.
- Make server log names more informative.
Author: Michael Paquier
Commit d04c8ed904 added another support function to the GIST API,
but overlooked mentioning it in xindex.sgml's summary of index support
functions.
Anastasia Lubennikova
This way, existing .gitignore entries and makefile clean actions will
automatically apply to the tempdir, should it survive a TAP test run
(which can happen if the user control-C's out of the run, for example).
Michael Paquier, per a complaint from me
This should make Coverity deduce that plperl_call_perl_func() does not
dereference NULL argtypes. Back-patch to 9.5, where the affected code
was introduced.
Michael Paquier
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
As pointed out by Fujii Masao, we weren't quite there on a standby
behaving sanely: first because we were failing to acquire the correct
state in the case where no XLOG_PARAMETER_CHANGE message was sent
(because a checkpoint had already happened after the setting was changed
in the master, and then the standby was restarted); and second because
promoting the standby with the feature enabled failed to activate it if
the master had the feature disabled.
This patch fixes both those misbehaviors hopefully without
re-introducing any old problems.
Also change the hint emitted in a standby together with the error
message about the feature being disabled, to make it point out that the
place to chance the setting is the master. Otherwise, if the setting is
already enabled in the standby, it is very confusing to have it say that
the setting must be enabled ...
Authors: Álvaro Herrera, Petr Jelínek.
Backpatch to 9.5.
Formerly, if "psql -o foo" failed to open the output file "foo", it would
print an error message but then carry on as though -o had not been
specified at all. This seems contrary to expectation: a program that
cannot open its output file normally fails altogether. Make psql do
exit(1) after reporting the error.
If "\o foo" failed to open "foo", it would print an error message but then
reset the output file to stdout, as if the argument had been omitted.
This is likewise pretty surprising behavior. Make it keep the previous
output state, instead.
psql keeps SIGPIPE interrupts disabled when it is writing to a pipe, either
a pipe specified by -o/\o or a transient pipe opened for purposes such as
using a pager on query output. The logic for this was too simple and could
sometimes re-enable SIGPIPE when a -o pipe was still active, thus possibly
leading to an unexpected psql crash later.
Fixing the last point required getting rid of the kluge in PrintQueryTuples
and ExecQueryUsingCursor whereby they'd transiently change the global
queryFout state, but that seems like good cleanup anyway.
Back-patch to 9.5 but not further; these are minor-enough issues that
changing the behavior in stable branches doesn't seem appropriate.