Display total time and I/O timings in milliseconds, for consistency with
the units used for timings in the core statistics views. The columns
remain of float8 type, so that sub-msec precision is available. (At some
point we will probably want to convert the core views to use float8 type
for the same reason, but this patch does not touch that issue.)
This is a release-note-requiring change in the meaning of the total_time
column. The I/O timing columns are new as of 9.2, so there is no
compatibility impact from redefining them.
Do some minor copy-editing in the documentation, too.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Remove lots of outdated information that is duplicated by the
better-maintained SGML documentation. In particular, remove the
outdated listing of contrib modules. Update the installation
instructions to mention CREATE EXTENSION, but don't go into too much
detail.
default tablespace, but part of a database that is in a user-defined
tablespace. Caused "file not found" error during upgrade.
Per bug report from Ants Aasma.
Backpatch to 9.1 and 9.0.
There's no need to sit there and increment the stats when we know all the
increments would be zero anyway. The actual additions might not be very
expensive, but skipping acquisition of the spinlock seems like a good
thing. Pushing the logic about initialization of the usage count down into
entry_alloc() allows us to do that while making the code actually simpler,
not more complex. Expansion on a suggestion by Peter Geoghegan.
This patch addresses a deficiency in the previous pg_stat_statements patch.
We want to give sticky entries an initial "usage" factor high enough that
they probably will stick around until their query is completed. However,
if the query never completes (eg it gets an error during execution), the
entry shouldn't persist indefinitely. Manage this by starting out with
a usage setting equal to the (approximate) median usage value within the
whole hashtable, but decaying the value much more aggressively than we
do for normal entries.
Peter Geoghegan
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
dblink_exec leaked temporary database connections if any error occurred
after connection setup, for example
SELECT dblink_exec('...connect string...', 'select 1/0');
Add a PG_TRY block to ensure PQfinish gets done when it is needed.
(dblink_record_internal is on the hairy edge of needing similar treatment,
but seems not to be actively broken at the moment.)
Also, in 9.0 and up, only one of the three functions using tuplestore
return mode was properly checking that the query context would allow
a tuplestore result.
Noted while reviewing dblink patch. Back-patch to all supported branches.
The DBLINK_GET_CONN and DBLINK_GET_NAMED_CONN macros did not set the
surrounding function's conname variable, causing errors to be incorrectly
reported as having occurred on the "unnamed" connection in some cases.
This bug was actually visible in two cases in the regression tests,
but apparently whoever added those cases wasn't paying attention.
Noted by Kyotaro Horiguchi, though this is different from his proposed
patch.
Back-patch to 8.4; 8.3 does not have the same type of error reporting
so the patch is not relevant.
It's actually more useful for the module to ignore these. Ignoring
EXECUTE (and not incrementing the nesting level) allows the executor
hooks to charge the time to the underlying prepared query, which
shows up as a stats entry with the original PREPARE as query string
(possibly modified by suppression of constants, which might not be
terribly useful here but it's not worth avoiding). This is much more
useful than cluttering the stats table with a distinct entry for each
textually distinct EXECUTE.
Experimentation with this idea shows that it's also preferable to ignore
PREPARE. If we don't, we get two stats table entries, one with the query
string hash and one with the jumble-derived hash, but with the same visible
query string (modulo those constants). This is confusing and not very
helpful, since the first entry will only receive costs associated with
initial planning of the query, which is not something counted at all
normally by pg_stat_statements. (And if we do start tracking planning
costs, we'd want them blamed on the other hash table entry anyway.)
When tracking nested statements, contrib/pg_stat_statements formerly
double-counted the execution costs of utility statements that directly
contain an executable statement, such as EXPLAIN and DECLARE CURSOR.
This was not obvious since the ProcessUtility and Executor hooks
would each add their measured costs to the same stats table entry.
However, with the new implementation that hashes utility and plannable
statements differently, this showed up as seemingly-duplicate stats
entries. Fix that by disabling the Executor hooks when the query has a
queryId of zero, which was the case already for such statements but is now
more clearly specified in the code. (The zero queryId was causing problems
anyway because all such statements would add to a single bogus entry.)
The PREPARE/EXECUTE case still results in counting the same execution
in two different stats table entries, but it should be much less surprising
to users that there are two entries in such cases.
In passing, include a CommonTableExpr's ctename in the query hash.
I had left it out originally on the grounds that we wanted to omit all
inessential aliases, but since RTE_CTE RTEs are hashing their referenced
names, we'd better hash the CTE names too to make sure we don't hash
semantically different queries the same.
pg_stat_statements now hashes selected fields of the analyzed parse tree
to assign a "fingerprint" to each query, and groups all queries with the
same fingerprint into a single entry in the pg_stat_statements view.
In practice it is expected that queries with the same fingerprint will be
equivalent except for values of literal constants. To make the display
more useful, such constants are replaced by "?" in the displayed query
strings.
This mechanism currently supports only optimizable queries (SELECT,
INSERT, UPDATE, DELETE). Utility commands are still matched on the
basis of their literal query strings.
There remain some open questions about how to deal with utility statements
that contain optimizable queries (such as EXPLAIN and SELECT INTO) and how
to deal with expiring speculative hashtable entries that are made to save
the normalized form of a query string. However, fixing these issues should
require only localized changes, and since there are other open patches
involving contrib/pg_stat_statements, it seems best to go ahead and commit
what we've got.
Peter Geoghegan, reviewed by Daniel Farina
Instead of just stopping after removing an arbitrary subset of orphaned
large objects, commit and start a new transaction after each -l objects.
This is just as effective as the original patch at limiting the number of
locks used, and it doesn't require doing the OID collection process
repeatedly to get everything. Since the option no longer changes the
fundamental behavior of vacuumlo, and it avoids a known server-side
limitation, enable it by default (with a default limit of 1000 LOs per
transaction).
In passing, be more careful about properly quoting the names of tables
and fields, and do some other cosmetic cleanup.
the non-development install. Instead, use the LOAD mechanism to check
for the pg_upgrade_support shared object, like we do for other shared
object checks.
Backpatch to 9.1.
Report from Àlvaro
This is intended as infrastructure to allow sepgsql to cooperate with
connection pooling software, by allowing the effective security label
to be set for each new connection.
KaiGai Kohei, reviewed by Yeb Havinga.
Extracted from a larger patch by Jaime Casanova, reviewed by Noah Misch.
I think this error message could use some more extensive revision, but
this at least makes the handling of spgist consistent with what we do for
other types of indexes that this code doesn't know how to handle.
add ability to control permissions of created files
have psql echo its queries for easier debugging
output four separate log files, and delete them on success
add -r/--retain option to keep log files after success
make logs file append-only
remove -g/-G/-l logging options
sugggest tailing appropriate log file on failure
enhance -v/--verbose behavior
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
GetForeignColumnOptions provides some abstraction for accessing
column-specific FDW options, on a par with the access functions that were
already provided here for other FDW-related information.
Adjust file_fdw.c to use GetForeignColumnOptions instead of equivalent
hand-rolled code.
In addition, add some SGML documentation for the functions exported by
foreign.c that are meant for use by FDW authors.
(This is the fdw_helper portion of the proposed pgsql_fdw patch.)
Hanada Shigeru, reviewed by KaiGai Kohei
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
Since the current version is 1.1, the 1.0 file isn't really needed. We do
need the 1.0--1.1 upgrade file, so people on 1.0 can upgrade.
Per recent discussion on pgsql-hackers.
The array intersection code would give wrong results if the first entry of
the correct output array would be "1". (I think only this value could be
at risk, since the previous word would always be a lower-bound entry with
that fixed value.)
Problem spotted by Julien Rouhaud, initial patch by Guillaume Lelarge,
cosmetic improvements by me.
This is some preliminary refactoring related to a pending patch
to allow sepgsql-enable sessions to make dynamic label transitions.
But this commit doesn't involve any functional change: it just puts
some bits of code in more logical places.
KaiGai Kohei
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
Tom Lane
Robert Haas
Peter Eisentraut
Bruce Momjian
Andrew Dunstan