I was dissatisfied with the code coverage report for expand_tuple() in the
wake of commit 7c44c46de: while better than no coverage at all, it was
still not exercising the core function of inserting out-of-line default
values, nor was the HeapTuple-output path covered. So far as I can find,
the only code path that reaches the latter at present is EvalPlanQual
fetches for non-locked tables. Hence, extend eval-plan-qual.spec to
test cases where out-of-line defaults must be inserted into a tuple
fetched from a non-locked table.
Discussion: https://postgr.es/m/87woxi24uw.fsf@ansel.ydns.eu
SELECT FOR UPDATE on a view should require UPDATE (as well as SELECT)
permissions on the view, and then the view's owner needs those same
permissions against the relations it references, and so on all the way
down to base tables. But ApplyRetrieveRule did things in the wrong order,
resulting in failure to mark intermediate view levels as needing UPDATE
permission. Thus for example, if user A creates a table T and an updatable
view V1 on T, then grants only SELECT permissions on V1 to user B, B could
create a second view V2 on V1 and then would be allowed to perform SELECT
FOR UPDATE via V2 (since V1 wouldn't be checked for UPDATE permissions).
To fix, just switch the order of expanding sub-views and marking referenced
objects as needing UPDATE permission. I think additional simplifications
are now possible, but that's distinct from the bug fix proper.
This is certainly a security issue, but the consequences are pretty minor
(just the ability to lock rows that shouldn't be lockable). Against that
we have a small risk of breaking applications that are working as-desired,
since nested views have behaved this way since such cases worked at all.
On balance I'm inclined not to back-patch.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/24db7b8f-3de5-e25f-7ab9-d8848351d42c@gmail.com
MaxIndexTuplesPerPage ignores the fact that btree indexes sometimes
store tuples with no data payload. But it also ignores the possibility
of "special space" on index pages, which offsets that, so that the
result isn't an underestimate. This all seems worth documenting, though.
In passing, remove #define MinIndexTupleSize, which was added by
commit 2c03216d8 but not used in that commit nor later ones.
Comment text by me; issue noticed by Peter Geoghegan.
Discussion: https://postgr.es/m/CAH2-WzkQmb54Kbx-YHXstRKXcNc+_87jwV3DRb54xcybLR7Oig@mail.gmail.com
We need to call expand_function_arguments() to expand named and default
arguments.
In PL/pgSQL, we also need to deal with named and default INOUT arguments
when receiving the output values into variables.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Commit 16828d5c forgot to check that it had a set of missing values
before trying to retrieve a value from it.
An additional query to add coverage for this code is added to the
regression test.
Per bug report from Andreas Seltenreich.
In passing, throw an error if the AF count is too small, rather than
just silently discarding extra affix entries.
Note that the new regression test cases require installing the
updated src/backend/tsearch/dicts files.
Arthur Zakirov
Discussion: https://postgr.es/m/20180413113447.GA32474@zakirov.localdomain
We'd throw away the partial result anyway after parsing the error message.
Throwing it away beforehand costs nothing and reduces the risk of
out-of-memory failure. Also, at least in systems that behave like
glibc/Linux, if the partial result was very large then the error PGresult
would get allocated at high heap addresses, preventing the heap storage
used by the partial result from being released to the OS until the error
PGresult is freed.
In psql >= 9.6, we hold onto the error PGresult until another error is
received (for \errverbose), so that this behavior causes a seeming
memory leak to persist for awhile, as in a recent complaint from
Darafei Praliaskouski. This is a potential performance regression from
older versions, justifying back-patching at least that far. But similar
behavior may occur in other client applications, so it seems worth just
back-patching to all supported branches.
Discussion: https://postgr.es/m/CAC8Q8tJ=7cOkPePyAbJE_Pf691t8nDFhJp0KZxHvnq_uicfyVg@mail.gmail.com
This custom opclass was already in use in other tests -- defined
independently in every such file. Move the definition to the earliest
test that uses it, and keep it around so that later tests can reuse it.
Use it in the tests for pruning of hash partitioning, and since this
makes the second expected file unnecessary, put those tests back in
partition_prune.sql whence they sprang.
Author: Amit Langote
Discussion: https://postgr.es/m/CA%2BTgmoZ0D5kJbt8eKXtvVdvTcGGWn6ehWCRSZbWytD-uzH92mQ%40mail.gmail.com
NISortAffixes() compared successive compound affixes incorrectly,
thus possibly failing to merge identical affixes, or (less likely)
merging ones that shouldn't be merged. The user-visible effects
of this are unclear, to me anyway.
Per bug #15150 from Alexander Lakhin. It's been broken for a long time,
so back-patch to all supported branches.
Arthur Zakirov
Discussion: https://postgr.es/m/152353327780.31225.13445405496721177988@wrigleys.postgresql.org
We were using CurrentMemoryContext to put the partsupfunc fmgr_info
into, which isn't right, because we want the PartitionKey as a whole to
be in the isolated Relation->rd_partkeycxt context. This can cause a
crash with user-defined support functions in the operator classes used
by partitioning keys. (Maybe this can cause problems with core-supplied
opclasses too, not sure.)
This is demonstrably broken in Postgres 10, too, but the initial
proposed fix runs afoul of a problem discussed back when 8a0596cb65
("Get rid of copy_partition_key") reorganized that code: namely that it
is possible to jump out of RelationBuildPartitionKey because of some
error and leave a dangling memory context child of CacheMemoryContext.
Also, while reviewing this I noticed that the removed-in-pg11
copy_partition_key was doing something wrong, unfixed in pg10, namely
doing memcpy() on the FmgrInfo, which is bogus (should be doing
fmgr_info_copy). Therefore, in branch pg10, the sane fix seems to be to
backpatch both the aforementioned 8a0596cb65 and its followup
be2343221f ("Protect against hypothetical memory leaks in
RelationGetPartitionKey"), so do that, then apply the fmgr_info memcxt
bugfix on top.
Add a test case exercising btree-based custom operator classes, which
causes a crash prior to this fix. This is not a security problem,
because in order to create an operator class you need superuser
privileges anyway.
Authors: Álvaro Herrera and Amit Langote
Reported and diagnosed by: Amit Langote
Discussion: https://postgr.es/m/3041e853-b1dd-a0c6-ff21-7cc5633bffd0@lab.ntt.co.jp
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
Discussion: https://www.postgresql.org/message-id/5ee72852-3c4e-ee35-e2ed-c1d053d45c08@sigaev.ru
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Oversight in commit 8b08f7d482: pg_class.relispartition was not
being set for index partitions, which is a bit odd, and was also causing
the code to unnecessarily call has_superclass() when simply checking the
flag was enough.
Author: Álvaro Herrera
Reported-by: Amit Langote
Discussion: https://postgr.es/m/12085bc4-0bc6-0f3a-4c43-57fe0681772b@lab.ntt.co.jp
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
When selecting a new OID, we take care to avoid picking one that's already
in use in the target table, so as not to create duplicates after the OID
counter has wrapped around. However, up to now we used SnapshotDirty when
scanning for pre-existing entries. That ignores committed-dead rows, so
that we could select an OID matching a deleted-but-not-yet-vacuumed row.
While that mostly worked, it has two problems:
* If recently deleted, the dead row might still be visible to MVCC
snapshots, creating a risk for duplicate OIDs when examining the catalogs
within our own transaction. Such duplication couldn't be visible outside
the object-creating transaction, though, and we've heard few if any field
reports corresponding to such a symptom.
* When selecting a TOAST OID, deleted toast rows definitely *are* visible
to SnapshotToast, and will remain so until vacuumed away. This leads to
a conflict that will manifest in errors like "unexpected chunk number 0
(expected 1) for toast value nnnnn". We've been seeing reports of such
errors from the field for years, but the cause was unclear before.
The fix is simple: just use SnapshotAny to search for conflicting rows.
This results in a slightly longer window before object OIDs can be
recycled, but that seems unlikely to create any large problems.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This fixes a bug whereby the st_appname, st_clienthostname, and
st_activity_raw fields for auxiliary processes point beyond the end of
their respective shared memory segments. As a result, the application_name
of a backend might show up as the client hostname of an auxiliary process.
Backpatch to v10, where this bug was introduced, when the auxiliary
processes were added to the array.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
The other strings, application_name and query string, were snapshotted to
local memory in pgstat_read_current_status(), but we forgot to do that for
client hostnames. As a result, the client hostname would appear to change in
the local copy, if the client disconnected.
Backpatch to all supported versions.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
If the table being attached contained values that contradict the default
partition's partition constraint, it would fail to complain, because
CommandCounterIncrement changes in 4dba331cb3 coupled with some bogus
coding in the existing ValidatePartitionConstraints prevented the
partition constraint from being validated after all -- or rather, it
caused to constraint to become an empty one, always succeeding.
Fix by not re-reading the OID of the default partition in
ATExecAttachPartition. To forestall similar problems, revise the
existing code:
* rename routine from ValidatePartitionConstraints() to
QueuePartitionConstraintValidation, to better represent what it
actually does.
* add an Assert() to make sure that when queueing a constraint for a
partition we're not overwriting a constraint previously queued.
* add an Assert() that we don't try to invoke the special-purpose
validation of the default partition when attaching the default
partition itself.
While at it, change some loops to obtain partition OIDs from
partdesc->oids rather than find_all_inheritors; reduce the lock level
of partitions being scanned from AccessExclusiveLock to ShareLock;
rewrite QueuePartitionConstraintValidation in a recursive fashion rather
than repetitive.
Author: Álvaro Herrera. Tests written by Amit Langote
Reported-by: Rushabh Lathia
Diagnosed-by: Kyotaro HORIGUCHI, who also provided the initial fix.
Reviewed-by: Kyotaro HORIGUCHI, Amit Langote, Jeevan Ladhe
Discussion: https://postgr.es/m/CAGPqQf0W+v-Ci_qNV_5R3A=Z9LsK4+jO7LzgddRncpp_rrnJqQ@mail.gmail.com
The MAKELEVEL hack to prevent submake-generated-headers from doing
anything in child make runs means that we have to explicitly invoke
it at top level for "make check", too, in case somebody proceeds
directly to that without an explicit "make all". (I think this
usage had parallel-make hazards even before the addition of more
generated headers; but it was totally broken as of 3b8f6e75f.)
Out of paranoia, force the submake-libpq target to depend on
submake-generated-headers, too. This seems to not be absolutely
necessary today, but it's not really saving us anything to omit
the ordering dependency, and it'll likely break someday without it.
Discussion: https://postgr.es/m/20180411103930.GB31461@momjian.us
The bug is caused due to the original IndexStmt that DefineIndex receives
being overwritten when processing the INCLUDE columns. Use separate list of
index params to propagate to child tables. Add tests covering this case.
Amit Langote and Alexander Korotkov.
One improbable error-exit path in this function used close() where
it should have used CloseTransientFile(). This is unlikely to be
hit in the field, and I think the consequences wouldn't be awful
(just an elog(LOG) bleat later). But a bug is a bug, so back-patch
to 9.4 where this code came in.
Pan Bian
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
This optimization was introduced in commit 2b272734. The changes include
some additional comments and documentation, and also these more
substantive changes:
. ensure the optimization is only applied on the leaf node of a tree
whose root is on level 2 or more. It's of little value on small trees.
. Delay calling RelationSetTargetBlock() until after the critical
section of _bt_insertonpg
. ensure the optimization is also applied to unlogged tables.
Pavan Deolasee and Peter Geoghegan with some very light editing from me.
Discussion: https://postgr.es/m/CABOikdO8jhRarNC60nZLktZYhxt+TK8z_V97+Ny499YQdyAfug@mail.gmail.com
I'd hoped that commit 3b8f6e75f was sufficient to ensure parallel safety
even when a build started in a subdirectory requires rebuilding of
generated headers. This isn't so, because making submake-generated-headers
a prerequisite of "all" isn't enough to ensure it's completed before
starting on "all"'s other prerequisites. The explicit dependencies we put
on the recursive make targets ensure safe ordering before we recurse into
child directories, but they don't protect targets to be made in the current
directory. Hence, put back some ordering dependencies in directories that
we've traditionally expected to be starting points for "standalone" builds,
to wit src/pl/plpython and src/test/regress. (The former needs this in
order to minimize the work involved in building for both python 2 and
python 3; the latter to support packagings that make the regression tests
available for out-of-build-tree execution.) Adjust some other dependencies
so that these two cases work correctly even at high -j settings.
I'm not terribly happy with this partial solution, but I don't see a
way to do better without massive makefile restructuring, which we surely
aren't doing at this point in the development cycle. In any case, it's
little if any worse than what we had in prior releases.
Discussion: https://postgr.es/m/1523353963.8169.26.camel@gunduz.org
The HeapFetches counter was using a simple value in IndexOnlyScanState,
which fails to propagate values from parallel workers; so the counts are
wrong when IndexOnlyScan runs in parallel. Move it to Instrumentation,
like all the other counters.
While at it, change INSERT ON CONFLICT conflicting tuple counter to use
the new ntuples2 instead of nfiltered2, which is a blatant misuse.
Discussion: https://postgr.es/m/20180409215851.idwc75ct2bzi6tea@alvherre.pgsql
Per Julien Rouhaud and the buildfarm. This is not quite Julien's
patch: there's no need to lobotomize this build rule when building
contrib modules in-tree, so set NO_GENERATED_HEADERS only if PGXS.
In passing, also set NO_TEMP_INSTALL in external builds. This doesn't
seem to be fixing any live bug, because "make check" in an external
build just produces the expected error message without first trying to
make a temp install ... but it's far from obvious why it doesn't, so
this change seems like good future-proofing.
Julien Rouhaud and Tom Lane
Discussion: https://postgr.es/m/CAOBaU_YH=g68opbbMk8is3jNwhoXGa8ckRSre1nx0Obe1C7i-Q@mail.gmail.com
The comment earlier in the function correctly states "and the insertion
key is strictly greater than the first key in this page". That is what
we check here, not "greater than or equal".
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
In 499be013de support for pruning unneeded Append subnodes was added.
The logic in that commit was not correctly checking if the next subplan
was in fact a valid subplan. This could cause parallel workers processes
to be given a subplan to work on which didn't require any work.
Per code review following an otherwise unexplained regression failure in
buildfarm member Pademelon. (We haven't been able to reproduce the
failure, so this is a bit of a blind fix in terms of whether it'll
actually fix it; but it is a clear bug nonetheless).
In passing, also add a comment to explain what first_partial_plan means.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_E5r05hHUVG3UmCQJ49DGKKHtN=SHybD44LdzBn+CJng@mail.gmail.com
Previously a warning was printed, but the tool actually kept running
even when running as root. This is something we definitely want to
prevent, but since this means a behavior change, not backpatching.
Author: Michael Paquier
Make these scripts emit just one log message when they run, not one
per output file. The latter is way too verbose in the wake of
commit 372728b0d. The specific wording used is what already existed
in the MSVC scripts.
John Naylor
Discussion: https://postgr.es/m/11103.1523208822@sss.pgh.pa.us
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
John Naylor
Discussion: https://postgr.es/m/28827.1523039259@sss.pgh.pa.us
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
We were initializing a BMS to merely reference an existing one, which
would cause a double-free (and a crash) when the recursive algorithm
tried to intersect it with an empty one. Fix it by creating a copy at
initialization time.
Reported-by: sqlsmith (by way of Andreas Seltenreich)
Author: Amit Langote
Discussion: https://postgr.es/m/87in923lyw.fsf@ansel.ydns.eu
CheckIndexCompatible() misused ComputeIndexAttrs() by not bothering
to fill ii_NumIndexAttrs and ii_NumIndexKeyAttrs in the passed
IndexInfo. Omission of ii_NumIndexAttrs was previously unimportant,
but now this matters because ComputeIndexAttrs depends on
ii_NumIndexKeyAttrs to decide how many columns it needs to report on.
(BTW, the fact that this oversight wasn't detected earlier implies
that we have no regression test verifying whether CheckIndexCompatible
ever succeeds. Bad dog. Not the job of this patch to fix it, though.)
Also, change the API of ComputeIndexAttrs so that it fills the opclass
output array for all column positions, as it does for the options output
array; positions for non-key index columns are filled with zeroes.
This isn't directly fixing any bug, but it seems like a good idea.
Per valgrind failure reports from buildfarm.
Alexander Korotkov, tweaked a bit by me
Discussion: https://postgr.es/m/CAPpHfduWrysrT-qAhn+3Ea5+Mg6Vhc-oA6o2Z-hRCPRdvf3tiw@mail.gmail.com
Write ',' and ';' for typdelim values instead of the obscurantist
ASCII octal equivalents. Not sure why anybody ever thought the
latter were better; maybe it had something to do with lack of
a better quoting convention, twenty-plus years ago?
Reassign a couple of high-numbered OIDs that were left in during
yesterday's mad rush to commit stuff of uncertain internal
temperature.
The latter requires a catversion bump, though the former wouldn't
since the end-result catalog data is unchanged.
Addition of the catalog/pg_foo_d.h headers seems to have pushed us over
the brink of the maximum command line length for some older platforms
during "make install" for our header files. The main culprit here is
repetition of the target directory path, which could be long.
Rearrange so that we don't repeat that once per file, but only once
per subdirectory.
Per buildfarm.
Discussion: https://postgr.es/m/E1f5Dwm-0004n5-7O@gemulon.postgresql.org
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
The atomics code asserts proper alignment in various places. That's
mainly because the alignment of 64bit integers is not sufficient for
atomic operations on all platforms. Some ABIs only have four byte
alignment, but don't have atomic behavior when crossing page
boundaries.
The flags code isn't affected by that however, as the type alignment
always is sufficient for atomic operations. Nevertheless the code
asserted alignment requirements. Before 8c3debbb it was only broken on
hppa, after it probably affect further platforms.
Thus remove the assertions for pg_atomic_flag operators.
Per buildfarm animal pademelon.
Discussion: https://postgr.es/m/7223.1523124425@sss.pgh.pa.us
Backpatch: 9.5-
Under EXEC BACKEND we also need to be going through the group privileges
setup since we do support that on Unixy systems, so add that to
SubPostmasterMain().
Under Windows, we need to simply return true from
GetDataDirectoryCreatePerm(), but that wasn't happening due to a missing
#else clause.
Per buildfarm.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This works very much like the existing bms_last_member function, only it
traverses through the Bitmapset in the opposite direction from the most
significant bit down to the least significant bit. A special prevbit value of
-1 may be used to have the function determine the most significant bit. This
is useful for starting a loop. When there are no members less than prevbit,
the function returns -2 to indicate there are no more members.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-K=3d5MDASNYFJpUpc20xcBnAwNC1-AOeunhn0OtkWbQ@mail.gmail.com
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
We need to wait for the initial sync of all subscriptions. On
some (faster?) machines, this didn't make a difference, but
the (slower?) buildfarm machines are upset.
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
The tests added as part of 9fdb675fc5 yield differing results
depending on endianess, causing buildfarm failures. As the differences
are expected, split the hash partitioning tests into a different file
and maintain alternative output. The separate file is so the amount of
duplicated output is reduced.
David produced the alternative output without a machine to test on, so
it's possible this'll require a buildfarm cycle or two to get right.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-6f4c2Qhuipe-GY7BKmFd0FMBobRnLS7hVCoAmTszsBg@mail.gmail.com
The atomics fallback implementation for pg_atomic_flag was broken,
returning the inverted value from pg_atomic_test_set_flag(). This was
unnoticed because a) atomic flags were unused until recently b) the
test code wasn't run when the fallback implementation was in
use (because it didn't allow to test for some edge cases).
Fix the bug, and improve the fallback so it has the same behaviour as
the non-fallback implementation in the problematic edge cases. That
breaks ABI compatibility in the back branches when fallbacks are in
use, but given they were broken until now...
Author: Andres Freund
Reported-by: Daniel Gustafsson
Discussion:
https://postgr.es/m/FB948276-7B32-4B77-83E6-D00167F8EEB4@yesql.sehttps://postgr.es/m/20180406233854.uni2h3mbnveczl32@alap3.anarazel.de
Backpatch: 9.5-, where the atomics abstraction was introduced.
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
This has no functional impact whatsoever. However, it causes
these unnecessary quote marks to disappear from the generated
postgres.bki file, making it easier to verify that the upcoming
bootstrap data conversion patch doesn't change the generated file.
These tests accummulated almost a gigabyte of data during the test which
was then removed at the end. Instead, remove output that's no longer
needed between the individual tests, to keep the total disk usage down
lower.
Author: Michael Banck
Add a new module backend/partitioning/partprune.c, implementing a more
sophisticated algorithm for partition pruning. The new module uses each
partition's "boundinfo" for pruning instead of constraint exclusion,
based on an idea proposed by Robert Haas of a "pruning program": a list
of steps generated from the query quals which are run iteratively to
obtain a list of partitions that must be scanned in order to satisfy
those quals.
At present, this targets planner-time partition pruning, but there exist
further patches to apply partition pruning at execution time as well.
This commit also moves some definitions from include/catalog/partition.h
to a new file include/partitioning/partbounds.h, in an attempt to
rationalize partitioning related code.
Authors: Amit Langote, David Rowley, Dilip Kumar
Reviewers: Robert Haas, Kyotaro Horiguchi, Ashutosh Bapat, Jesper Pedersen.
Discussion: https://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
This provides a newer version of adminpack which works with the newly
added default roles to support GRANT'ing to non-superusers access to
read and write files, along with related functions (unlinking files,
getting file length, renaming/removing files, scanning the log file
directory) which are supported through adminpack.
Note that new versions of the functions are required because an
environment might have an updated version of the library but still have
the old adminpack 1.0 catalog definitions (where EXECUTE is GRANT'd to
PUBLIC for the functions).
This patch also removes the long-deprecated alternative names for
functions that adminpack used to include and which are now included in
the backend, in adminpack v1.1. Applications using the deprecated names
should be updated to use the backend functions instead. Existing
installations which continue to use adminpack v1.0 should continue to
function until/unless adminpack is upgraded.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This patch adds new default roles named 'pg_read_server_files',
'pg_write_server_files', 'pg_execute_server_program' which
allow an administrator to GRANT to a non-superuser role the ability to
access server-side files or run programs through PostgreSQL (as the user
the database is running as). Having one of these roles allows a
non-superuser to use server-side COPY to read, write, or with a program,
and to use file_fdw (if installed by a superuser and GRANT'd USAGE on
it) to read from files or run a program.
The existing misc file functions are also changed to allow a user with
the 'pg_read_server_files' default role to read any files on the
filesystem, matching the privileges given to that role through COPY and
file_fdw from above.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This removes the explicit superuser checks in the various file-access
functions in the backend, specifically pg_ls_dir(), pg_read_file(),
pg_read_binary_file(), and pg_stat_file(). Instead, EXECUTE is REVOKE'd
from public for these, meaning that only a superuser is able to run them
by default, but access to them can be GRANT'd to other roles.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
The previous coding inadvertently checked the constraints for the
partitioned table rather than the target partition, which could
lead to data in a partition that fails to satisfy some constraint
on that partition. This problem seems to date back to when
table partitioning was introduced; prior to that, there was only
one target table for a COPY, so the problem didn't occur, and the
code just didn't get updated.
Etsuro Fujita, reviewed by Amit Langote and Ashutosh Bapat
Discussion: https://postgr.es/message-id/5ABA4074.1090500%40lab.ntt.co.jp
We don't actually need the insert-or-update logic, so it's clearer to
have separate functions for the inserting and updating.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
In case the subscription is removed before the worker is fully started,
give a specific error message instead of the generic "cache lookup"
error.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
A normal SQL command run inside PL/pgSQL acquires a snapshot, but SET
TRANSACTION does not work anymore if a snapshot is set. So we have to
handle this separately.
Reviewed-by: Alexander Korotkov <a.korotkov@postgrespro.ru>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
If we are not going to save the plan, then we need to unset expr->plan
after we are done, also in error cases. Otherwise, we get a dangling
pointer next time around.
This is not the ideal solution. It would be better if we could convince
SPI not to associate a cached plan with a resource owner, and then we
could just save the plan in all cases. But that would require bigger
surgery.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
857f9c36 bumps B-tree metapage version while upgrade is performed "on the fly"
when needed. However, some asserts fired when old version metapage was
cached to rel->rd_amcache. Despite new metadata fields are never used from
rel->rd_amcache, that needs to be fixed. This patch introduces metadata
upgrade during its caching, which fills unavailable fields with their default
values. contrib/pageinspect is also patched to handle non-upgraded metapages
in the same way.
Author: Alexander Korotkov
Review comments from Andres Freund
* Consolidate code into AfterTriggerGetTransitionTable()
* Rename nodeMerge.c to execMerge.c
* Rename nodeMerge.h to execMerge.h
* Move MERGE handling in ExecInitModifyTable()
into a execMerge.c ExecInitMerge()
* Move mt_merge_subcommands flags into execMerge.h
* Rename opt_and_condition to opt_merge_when_and_condition
* Wordsmith various comments
Author: Pavan Deolasee
Reviewer: Simon Riggs
Maintainers of out-of-tree PLs typically need access to the set of
error codes. To avoid the need to duplicate that information in some
form in PL source trees, provide errcodes.txt as part of a server
installation.
Thomas Munro, based on a suggestion from Andrew Gierth
Discussion: https://postgr.es/m/87woykk7mu.fsf%40news-spur.riddles.org.uk
This is a blind fix, since I don't have SE-Linux to verify it.
Per unwanted change in rhinoceros, running sepgsql tests. Noted by Tom
Lane.
Discussion: https://postgr.es/m/32347.1522865050@sss.pgh.pa.us
This reworks how the tests to run are defined. Instead of having to
define all runs for all tests, we define those tests which should pass
(generally using one of the defined broad hashes), add in any which
should be specific for this test, and exclude any specific runs that
shouldn't pass for this test. This ends up removing some 4k+ lines
(more than half the file) but, more importantly, greatly simplifies the
way runs-to-be-tested are defined.
As discussed in the updated comments, for example, take the test which
does CREATE TABLE test_table. That CREATE TABLE should show up in all
'full' runs of pg_dump, except those cases where 'test_table' is
excluded, of course, and that's exactly how the test gets defined now
(modulo a few other related cases, like where we dump only that table,
or we dump the schema it's in, or we exclude the schema it's in):
like => {
%full_runs,
%dump_test_schema_runs,
only_dump_test_table => 1,
section_pre_data => 1, },
unlike => {
exclude_dump_test_schema => 1,
exclude_test_table => 1, }, },
Next, we no longer expect every run to be listed for every test. If a
run is listed in 'like' (directly or through a hash) then it's a 'like',
unless it's listed in 'unlike' in which case it's an 'unlike'. If it
isn't listed in either, then it's considered an 'unlike' automatically.
Lastly, this changes the code to no longer use like/unlike but rather to
use 'ok()' with 'diag()' which allows much more control over what gets
spit out to the screen. Gone are the days of the entire dump being sent
to the console, now you'll just get a couple of lines for each failing
test which say the test that failed and the run that it failed on.
This covers both the pg_dump TAP tests in src/bin/pg_dump and those in
src/test/modules/test_pg_dump.
BRIN indexes like to propagate additions of free space into the upper pages
of their free space maps as soon as the new space is known, even when it's
just on one individual index page. Previously this required calling
FreeSpaceMapVacuum, which is quite an expensive thing if the map is large.
Use the FreeSpaceMapVacuumRange function recently added by commit c79f6df75
to reduce the amount of work done for this purpose.
Fix a couple of places that neglected to do the upper-page vacuuming at all
after recording new free space. If the policy is to be that BRIN should do
that, it should do it everywhere.
Do RecordPageWithFreeSpace unconditionally in brin_page_cleanup, and do
FreeSpaceMapVacuum unconditionally in brin_vacuum_scan. Because of the
FSM's imprecise storage of free space, the old complications here seldom
bought anything, they just slowed things down. This approach also
provides a predictable path for FSM corruption to be repaired.
Remove premature RecordPageWithFreeSpace call in brin_getinsertbuffer
where it's about to return an extended page to the caller. The caller
should do that, instead, after it's inserted its new tuple. Fix the
one caller that forgot to do so.
Simplify logic in brin_doupdate's same-page-update case by postponing
brin_initialize_empty_new_buffer to after the critical section; I see
little point in doing it before.
Avoid repeat calls of RelationGetNumberOfBlocks in brin_vacuum_scan.
Avoid duplicate BufferGetBlockNumber and BufferGetPage calls in
a couple of places where we already had the right values.
Move a BRIN_elog debug logging call out of a critical section; that's
pretty unsafe and I don't think it buys us anything to not wait till
after the critical section.
Move the "*extended = false" step in brin_getinsertbuffer into the
routine's main loop. There's no actual bug there, since the loop can't
iterate with *extended still true, but it doesn't seem very future-proof
as coded; and it's certainly not documented as a loop invariant.
This is all from follow-on investigation inspired by commit c79f6df75.
Discussion: https://postgr.es/m/5801.1522429460@sss.pgh.pa.us
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
The code before the main loop, to handle the possible 1-7 unaligned bytes
at the beginning of the input, was broken, and read past the input, if the
the input was very short.
Hopefully fix the fact that these checks are unstable, by introducing
the corruption in a separate table from pg_class, and also explicitly
disable autovacuum on those tables. Also make sure PostgreSQL is
stopped while the corruption is introduced to avoid possible caching
effects.
Author: Michael Banck
ARMv8 introduced special CPU instructions for calculating CRC-32C. Use
them, when available, for speed.
Like with the similar Intel CRC instructions, several factors affect
whether the instructions can be used. The compiler intrinsics for them must
be supported by the compiler, and the instructions must be supported by the
target architecture. If the compilation target architecture does not
support the instructions, but adding "-march=armv8-a+crc" makes them
available, then we compile the code with a runtime check to determine if
the host we're running on supports them or not.
For the runtime check, use glibc getauxval() function. Unfortunately,
that's not very portable, but I couldn't find any more portable way to do
it. If getauxval() is not available, the CRC instructions will still be
used if the target architecture supports them without any additional
compiler flags, but the runtime check will not be available.
Original patch by Yuqi Gu, heavily modified by me. Reviewed by Andres
Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/HE1PR0801MB1323D171938EABC04FFE7FA9E3110%40HE1PR0801MB1323.eurprd08.prod.outlook.com
Trigger cloning to partitions was supposed to occur for user-visible
triggers only, but during development the protection that prevented it
from occurring to internal triggers was lost. Reinstate it, as well as
add a test case to ensure internal triggers (in the tested case,
triggers implementing a deferred unique constraint) are not cloned.
Without the code fix, the partitions in the test end up with different
numbers of triggers, which is clearly wrong ...
Bug in 86f575948c.
Discussion: https://postgr.es/m/20180403214903.ozfagwjcpk337uw7@alvherre.pgsql
Make buffer 1 byte larger to fit a sign. It's actually impossible for
there to be a sign in practice, but this is still required to keep GCC 7
happy.
Cleanup from commit 51bc271790.
Based on a suggestion from Peter Eisentraut.
Author: Peter Geoghegan
Reported-By: Peter Eisentraut
Discussion: https://postgr.es/m/d1cc82ed-d07d-cef2-7c00-2e987f121648@2ndquadrant.com
Previous coding was passing the wrong table's tuple descriptor, which
accidentally fails to fail because no existing test case exercises a
foreign key in which the referenced attributes are further to the right
of the referencing attributes.
Add a test so that further breakage is visible.
This got broken in 16828d5c02.
Discussion: https://postgr.es/m/20180403204723.fqte755nukgm42uf@alvherre.pgsql
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
The prefix operator along with SP-GiST indexes can be used as an alternative
for LIKE 'word%' commands and it doesn't have a limitation of string/prefix
length as B-Tree has.
Bump catalog version
Author: Ildus Kurbangaliev with some editorization by me
Review by: Arthur Zakirov, Alexander Korotkov, and me
Discussion: https://www.postgresql.org/message-id/flat/20180202180327.222b04b3@wp.localdomain
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewers: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Coverity complained about possible buffer overrun in two places added by
commit 1eb6d6527, and AFAICS it's reasonable to worry: even granting that
the WAL originator properly truncated the commit GID to GIDSIZE, we should
not really bet our lives on that having the same value as it does in the
current build. Hence, use strlcpy() not strcpy(), and adjust the pointer
advancement logic to be sure we skip over the whole source string even if
strlcpy() truncated it.
Recent commit 8a3d9425 has introduced be-secure-common.c, which is aimed
at including backend-side APIs that can be used by any SSL
implementation. The purpose is similar to fe-secure-common.c for the
frontend-side APIs.
However, this has forgotten to include check_ssl_key_file_permissions()
in the move, which causes a double dependency between be-secure.c and
be-secure-openssl.c.
Refactor the code in a more logical way. This also puts into light an
API which is usable by future SSL implementations for permissions on SSL
key files.
Author: Michael Paquier <michael@paquier.xyz>
Since commit 7012b132d0, postgres_fdw
has been able to push down the toplevel aggregation operation to the
remote server. Commit e2f1eb0ee3 made
it possible to break down the toplevel aggregation into one
aggregate per partition. This commit lets postgres_fdw push down
aggregation in that case just as it does at the top level.
In order to make this work, this commit adds an additional argument
to the GetForeignUpperPaths FDW API. A matching argument is added
to the signature for create_upper_paths_hook. Third-party code using
either of these will need to be updated.
Also adjust create_foreignscan_plan() so that it picks up the correct
set of relids in this case.
Jeevan Chalke, reviewed by Ashutosh Bapat and by me and with some
adjustments by me. The larger patch series of which this patch is a
part was also reviewed and tested by Antonin Houska, Rajkumar
Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal
Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
Discussion: http://postgr.es/m/CAM2+6=XPWujjmj5zUaBTGDoB38CemwcPmjkRy0qOcsQj_V+2sQ@mail.gmail.com
round() is from C99. Use rint() instead. There are behavioral
differences between round() and rint(), but they should not matter to
the Bloom filter optimal_k() function. We already assume POSIX
behavior for rint(), so there is no question of rint() not using
"rounds towards nearest" as its rounding mode.
Cleanup from commit 51bc271790.
Per buildfarm member thrips.
Author: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn76eCGUonARy-wrVtMHsf+4cvbK_oJAWTLfORTU5ki0w@mail.gmail.com
A Bloom filter is a space-efficient, probabilistic data structure that
can be used to test set membership. Callers will sometimes incur false
positives, but never false negatives. The rate of false positives is a
function of the total number of elements and the amount of memory
available for the Bloom filter.
Two classic applications of Bloom filters are cache filtering, and data
synchronization testing. Any user of Bloom filters must accept the
possibility of false positives as a cost worth paying for the benefit in
space efficiency.
This commit adds a test harness extension module, test_bloomfilter. It
can be used to get a sense of how the Bloom filter implementation
performs under varying conditions.
This is infrastructure for the upcoming "heapallindexed" amcheck patch,
which verifies the consistency of a heap relation against one of its
indexes.
Author: Peter Geoghegan
Reviewed-By: Andrey Borodin, Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzm5VmG7cu1N-H=nnS57wZThoSDQU+F5dewx3o84M+jY=g@mail.gmail.com
Avoid storing the result of PQsocket() in a pgsocket variable; it's
declared as int, and the no-socket test is properly written as "x < 0"
not "x == PGINVALID_SOCKET". This accidentally had no bad effect
because we never got to init_slot() with a bad connection, but it's
still wrong.
Actually, it seems like we should avoid storing the result for a long
period at all. The function's not so expensive that it's worth avoiding,
and the existing coding technique here would fail if anyone tried to
PQreset the connection during the life of the program. Hence, just
re-call PQsocket every time we construct a select(2) mask.
Speaking of select(), GetIdleSlot imagined that it could compute the
select mask once and continue to use it over multiple calls to
select_loop(), which is pretty bogus since that would stomp on the
mask on return. This could only matter if the function's outer loop
iterated more than once, which is unlikely (it'd take some connection
receiving data, but not enough to complete its command). But if it
did happen, we'd acquire "tunnel vision" and stop watching the other
connections for query termination, with the effect of losing parallelism.
Another way in which GetIdleSlot could lose parallelism is that once
PQisBusy returns false, it would lock in on that connection and do
PQgetResult until that returns NULL; in some cases that could result
in blocking. (Perhaps this can never happen in vacuumdb due to the
limited set of commands that it can issue, but I'm not quite sure
of that, and even if true today it's not a future-proof assumption.)
Refactor the code to do that properly, so that it risks blocking in
PQgetResult only in cases where we need to wait anyway.
Another loss-of-parallelism problem, which *is* easily demonstrable,
is that any setup queries issued during prepare_vacuum_command() were
always issued on the last-to-be-created connection, whether or not
that was idle. Long-running operations on that connection thus
prevented issuance of additional operations on the other ones, except
in the limited cases where no preparatory query was needed. Instead,
wait till we've identified a free connection and use that one.
Also, avoid core dump due to undersized malloc request in the case
that no tables are identified to be vacuumed.
The bogus no-socket test was noted by CharSyam, the other problems
identified in my own code review. Back-patch to 9.5 where parallel
vacuumdb was introduced.
Discussion: https://postgr.es/m/CAMrLSE6etb33-192DTEUGkV-TsvEcxtBDxGWG1tgNOMnQHwgDA@mail.gmail.com
Compilation failed for lack of an #ifdef on builds without
pg_strong_random(). Also fix relevant error messages to meet
project style guidelines.
Fabien Coelho, further adjusted by me
Discussion: https://postgr.es/m/32390.1522464534@sss.pgh.pa.us
So far as I can find, NI_MAXHOST isn't actually required anywhere by
POSIX. Nonetheless, commit 9a895462d supposed that it could rely on
having that symbol without any ceremony at all. We do have a hack
for providing it if the platform doesn't, in getaddrinfo.h, so fix
the problem by #including that file. Per buildfarm.
In 9956ddc191, ten years ago, the
current objfile.txt based linking model was introduced. It's time to
retire the old SUBSYS.o based model.
This primarily is pertinent because the bitcode files for LLVM based
inlining are not produced when using PARTIAL_LINKING. It does not seem
worth to fix PARTIAL_LINKING to support that.
Author: Andres Freund
Discussion: https://postgr.es/m/20180121204356.d5oeu34jetqhmdv2@alap3.anarazel.de
LockViewRecurese() obtains view relation using heap_open() and passes
it to get_view_query() to get view info. It immediately closes the
relation then uses the returned view info by calling
LockViewRecurse_walker(). Since get_view_query() returns a pointer
within the relcache, the relcache should be kept until
LockViewRecurse_walker() returns. Otherwise the relation could point
to a garbage memory area.
Fix is moving the heap_close() call after LockViewRecurse_walker().
Problem reported by Tom Lane (buildfarm is unhappy, especially prion
since it enables -DRELCACHE_FORCE_RELEASE cpp flag), fix by me.
A followup patch will add a SKIP_LOCKED option. To avoid introducing
evermore arguments, breaking existing callers each time, introduce a
flags argument. This'll no doubt break a few external users...
Also change the MISSING_OK behaviour so a DEBUG1 debug message is
emitted when a relation is not found.
Author: Nathan Bossart
Reviewed-By: Michael Paquier and Andres Freund
Discussion: https://postgr.es/m/20180306005349.b65whmvj7z6hbe2y@alap3.anarazel.de
Previously there was no way in the standby side to find out the host and port
of the sender server that the walreceiver was currently connected to when
multiple hosts and ports were specified in primary_conninfo. For that purpose,
this patch adds sender_host and sender_port columns into pg_stat_wal_receiver
view. They report the host and port that the active replication connection
currently uses.
Bump catalog version.
Author: Haribabu Kommi
Reviewed-by: Michael Paquier and me
Discussion: https://postgr.es/m/CAJrrPGcV_aq8=cdqkFhVDJKEnDQ70yRTTdY9RODzMnXNrCz2Ow@mail.gmail.com
Richard Yen reported that pg_upgrade failed if the target cluster had
force_parallel_mode = on, because binary_upgrade_create_empty_extension()
is marked parallel restricted, allowing it to be executed in parallel
mode, which complains because it tries to acquire an XID.
In general, no function that might try to modify database data should
be considered parallel safe or restricted, since execution of it might
force XID acquisition. We found several other examples of this mistake.
Furthermore, functions that execute user-supplied SQL queries or query
fragments, or pull data from user-supplied cursors, had better be marked
both volatile and parallel unsafe, because we don't know what the supplied
query or cursor might try to do. There were several tsquery and XML
functions that had the wrong proparallel marking for this, and some of
them were even mislabeled as to volatility.
All these bugs are old, dating back to 9.6 for the proparallel mistakes
and much further for the provolatile mistakes. We can't force a
catversion bump in the back branches, but we can at least ensure that
installations initdb'd in future have the right values.
Thomas Munro and Tom Lane
Discussion: https://postgr.es/m/CAEepm=2sNDScSLTfyMYu32Q=ob98ZGW-vM_2oLxinzSABGQ6VA@mail.gmail.com
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
When SSI was developed, slru.c was limited to segment files with names in
the range 0000-FFFF. This didn't allow enough space for predicate.c to
store every possible XID when spilling old transactions to disk, so it
would wrap around sooner and print warnings. Since commits 638cf09e and
73c986ad increased the number of segment files slru.c could manage, that
behavior is unnecessary. Therefore remove that code.
Also remove the macro OldSerXidSegment, which has been unused since
4cd3fb6e.
Thomas Munro, reviewed by Anastasia Lubennikova
Discussion: https://postgr.es/m/CAEepm=3XfsTSxgEbEOmxu0QDiXy0o18NUg2nC89JZcCGE+XFPA@mail.gmail.com
Add the target context's name to the errdetail field of "out of memory"
errors in mcxt.c. Per discussion, this seems likely to be useful to
help narrow down the cause of a reported failure, and it costs little.
Also, now that context names are required to be compile-time constants
in all cases, there's little reason to be concerned about security
issues from exposing these names to users. (Because of such concerns,
we are *not* including the context "ident" field.)
In passing, add unlikely() markers to the allocation-failed tests,
just to be sure the compiler is on the right page about that.
Also, in palloc and friends, copy CurrentMemoryContext into a local
variable, as that's almost surely cheaper to reference than a global.
Discussion: https://postgr.es/m/1099.1522285628@sss.pgh.pa.us
In btree and SP-GiST indexes, move the responsibility for calling
IndexFreeSpaceMapVacuum from the vacuumcleanup phase to the bulkdelete
phase, and do it if and only if we found some pages that could be put into
FSM. As in commit 851a26e26, the idea is to make free pages visible to FSM
searchers sooner when vacuuming very large tables (large enough to need
multiple bulkdelete scans). This adds more redundant work than that commit
did, since we have to scan the entire index FSM each time rather than being
able to localize what needs to be updated; but it still seems worthwhile.
However, we can buy something back by not touching the FSM at all when
there are no pages that can be put in it. That will result in slower
recovery from corrupt upper FSM pages in such a scenario, but it doesn't
seem like that's a case we need to optimize for.
Hash indexes don't use FSM at all. GIN, GiST, and bloom indexes update
FSM during the vacuumcleanup phase not bulkdelete, so that doing something
comparable to this would be a much more invasive change, and it's not clear
it's worth it. BRIN indexes do things sufficiently differently that this
change doesn't apply to them, either.
Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
Unlike the previous coding, this might result in a Gather per Append
subplan when the target list is parallel-restricted, but such a plan
is probably worth considering in that case, since a single Gather
on top of the entire Append is impossible.
Per Andres Freund and the buildfarm.
Discussion: http://postgr.es/m/20180330050351.bmxx4cdtz67czjda@alap3.anarazel.de
Predicate locks are used on per page basis only if fastupdate = off, in
opposite case predicate lock on pending list will effectively lock whole index,
to reduce locking overhead, just lock a relation. Entry and posting trees are
essentially B-tree, so locks are acquired on leaf pages only.
Author: Shubham Barai with some editorization by me and Dmitry Ivanov
Review by: Alexander Korotkov, Dmitry Ivanov, Fedor Sigaev
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPt5sWW+EwTaKUGFL5_XFcZ0MuGBcyJ70oqbWqr42YKR8Q@mail.gmail.com
If the toplevel scan/join target list is parallel-safe, postpone
generating Gather (or Gather Merge) paths until after the toplevel has
been adjusted to return it. This (correctly) makes queries with
expensive functions in the target list more likely to choose a
parallel plan, since the cost of the plan now reflects the fact that
the evaluation will happen in the workers rather than the leader.
The original complaint about this problem was from Jeff Janes.
If the toplevel scan/join relation is partitioned, recursively apply
the changes to all partitions. This sometimes allows us to get rid of
Result nodes, because Append is not projection-capable but its
children may be. It also cleans up what appears to be incorrect SRF
handling from commit e2f1eb0ee3: the old
code had no knowledge of SRFs for child scan/join rels.
Because we now use create_projection_path() in some cases where we
formerly used apply_projection_to_path(), this changes the ordering
of columns in some queries generated by postgres_fdw. Update
regression outputs accordingly.
Patch by me, reviewed by Amit Kapila and by Ashutosh Bapat. Other
fixes for this problem (substantially different from this version)
were reviewed by Dilip Kumar, Amit Khandekar, and Marina Polyakova.
Discussion: http://postgr.es/m/CAMkU=1ycXNipvhWuweUVpKuyu6SpNjF=yHWu4c4US5JgVGxtZQ@mail.gmail.com
Don't call generate_gather_paths for the topmost scan/join relation
when it is initially populated with paths. Instead, do the work in
grouping_planner. By itself, this gains nothing; in fact it loses
slightly because we end up calling set_cheapest() for the topmost
scan/join rel twice rather than once. However, it paves the way for
a future commit which will postpone generate_gather_paths for the
topmost scan/join relation even further, allowing more accurate
costing of parallel paths.
Amit Kapila and Robert Haas. Earlier versions of this patch (which
different substantially) were reviewed by Dilip Kumar, Amit
Khandekar, Marina Polyakova, and Ashutosh Bapat.
We sometimes insert a ProjectionPath into a plan tree when projection
is not strictly required. The existing code already arranges to avoid
emitting a Result node when the ProjectionPath's subpath can perform
the projection itself, but previously it didn't consider the
possibility that the parent node might not actually require the
projection to be performed at all.
Skipping projection when it's not required can not only avoid Result
nodes that aren't needed, but also avoid losing the "physical tlist"
optimization unneccessarily.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoakT5gmahbPWGqrR2nAdFOMAOnOXYoWHRdVfGWs34t6_A@mail.gmail.com
Just noticed that these were quite redundant, since we're holding the
page address in a local variable anyway, and we have pin on the buffer
throughout.
Also improve a comment.
FreeSpaceMapVacuumRange has the same effect, is more efficient if many
pages are involved, and makes fewer assumptions about how it's used.
Notably, Claudio Freire pointed out that UpdateFreeSpaceMap could fail
if the specified freespace value isn't the maximum possible. This isn't
a problem for the single existing user, but the function represents an
attractive nuisance IMO, because it's named as though it were a
general-purpose update function and its limitations are undocumented.
In any case we don't need multiple ways to get the same result.
In passing, do some code review and cleanup in RelationAddExtraBlocks.
In particular, I see no excuse for it to omit the PageIsNew safety check
that's done in the mainline extension path in RelationGetBufferForTuple.
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
VACUUM updates leaf-level FSM entries immediately after cleaning the
corresponding heap blocks. fsmpage.c updates the intra-page search trees
on the leaf-level FSM pages when this happens, but it does not touch the
upper-level FSM pages, so that the released space might not actually be
findable by searchers. Previously, updating the upper-level pages happened
only at the conclusion of the VACUUM run, in a single FreeSpaceMapVacuum()
call. This is bad because the VACUUM might get canceled before ever
reaching that point, so that from the point of view of searchers no space
has been freed at all, leading to table bloat.
We can improve matters by updating the upper pages immediately after each
cycle of index-cleaning and heap-cleaning, processing just the FSM pages
corresponding to the range of heap blocks we have now fully cleaned.
This adds a small amount of extra work, since the FSM pages leading down
to each range boundary will be touched twice, but it's pretty negligible
compared to everything else going on in a large VACUUM.
If there are no indexes, VACUUM doesn't work in cycles but just cleans
each heap page on first visit. In that case we just arbitrarily update
upper FSM pages after each 8GB of heap. That maintains the goal of not
letting all this work slide until the very end, and it doesn't seem worth
expending extra complexity on a case that so seldom occurs in practice.
In either case, the FSM is fully up to date before any attempt is made
to truncate the relation, so that the most likely scenario for VACUUM
cancellation no longer results in out-of-date upper FSM pages. When
we do successfully truncate, adjusting the FSM to reflect that is now
fully handled within FreeSpaceMapTruncateRel.
Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
Add explicit cast from scalar jsonb to all numeric and bool types. It would be
better to have cast from scalar jsonb to text too but there is already a cast
from jsonb to text as just text representation of json. There is no way to have
two different casts for the same type's pair.
Bump catalog version
Author: Anastasia Lubennikova with editorization by Nikita Glukhov and me
Review by: Aleksander Alekseev, Nikita Glukhov, Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/0154d35a-24ae-f063-5273-9ffcdf1c7f2e@postgrespro.ru
Previously, committing or aborting inside a cursor loop was prohibited
because that would close and remove the cursor. To allow that,
automatically convert such cursors to holdable cursors so they survive
commits or rollbacks. Portals now have a new state "auto-held", which
means they have been converted automatically from pinned. An auto-held
portal is kept on transaction commit or rollback, but is still removed
when returning to the main loop on error.
This supports all languages that have cursor loop constructs: PL/pgSQL,
PL/Python, PL/Perl.
Reviewed-by: Ildus Kurbangaliev <i.kurbangaliev@postgrespro.ru>
As promised in earlier commits, this adds documentation about the new
build options, the new GUCs, about the planner logic when JIT is used,
and the benefits of JIT in general.
Also adds a more implementation oriented README.
I'm sure we're going to want to expand this further, but I think this
is a reasonable start.
Author: Andres Freund, with contributions by Thomas Munro
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This just shows a few details about JITing, e.g. how many functions
have been JITed, and how long that took. To avoid noise in regression
tests with functions sometimes being JITed in --with-llvm builds,
disable display when COSTS OFF is specified.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.
This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.
To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories. PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.
Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds. Once that is resolved we can remove the superfluous
read from disk.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
When compiling with clang glibc's definition of isinf() ends up
leading to and external libc function call. That's because there was a
bug in the builtin in an old gcc version, and clang claims
compatibility with an older version. That causes clang to be
measurably slower for floating point heavy workloads than gcc.
To fix simply redirect isinf when using clang and clang confirms it
has __builtin_isinf().
The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me
Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz
After processing the filemap to build the list of chunks that will be
fetched from the source to rewing the target server, it is possible that
a file which was previously processed is removed from the source. A
simple example of such an occurence is a WAL segment which gets recycled
on the target in-between. When the filemap is processed, files not
categorized as relation files are first truncated to prepare for its
full copy of which is going to be taken from the source, divided into a
set of junks. However, for a recycled WAL segment, this would result in
a segment which has a zero-byte size. With such an empty file,
post-rewind recovery thinks that records are saved but they are actually
not because of the truncation which happened when processing the
filemap, resulting in data loss.
In order to fix the problem, make sure that files which are found as
removed on the source when receiving chunks of them are as well deleted
on the target server for consistency.
Back-patch to 9.5 where pg_rewind was added.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier
Reported-by: Tsunakawa Takayuki
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8DAAA2%40G01JPEXMBYT05
So far, a nested CALL or DO in PL/pgSQL would not establish a context
where transaction control statements were allowed. This fixes that by
handling CALL and DO specially in PL/pgSQL, passing the atomic/nonatomic
execution context through and doing the required management around
transaction boundaries.
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
tuplesort_gettupleslot() passed back tuples allocated in the tuplesort's
own memory context, even when the caller was responsible to free them.
This created a double-free hazard, because some callers might destroy
the tuplesort object (via tuplesort_end) before trying to clean up the
last returned tuple. To avoid this, change the API to specify that the
tuple is allocated in the caller's memory context. v10 and HEAD already
did things that way, but in 9.5 and 9.6 this is a live bug that can
demonstrably cause crashes with some grouping-set usages.
In 9.5 and 9.6, this requires doing an extra tuple copy in some cases,
which is unfortunate. But the amount of refactoring needed to avoid it
seems excessive for a back-patched change, especially since the cases
where an extra copy happens are less performance-critical.
Likewise change tuplesort_getdatum() to return pass-by-reference Datums
in the caller's context not the tuplesort's context. There seem to be
no live bugs among its callers, but clearly the same sort of situation
could happen in future.
For other tuplesort fetch routines, continue to allocate the memory in
the tuplesort's context. This is a little inconsistent with what we now
do for tuplesort_gettupleslot() and tuplesort_getdatum(), but that's
preferable to adding new copy overhead in the back branches where it's
clearly unnecessary. These other fetch routines provide the weakest
possible guarantees about tuple memory lifespan from v10 on, anyway,
so this actually seems more consistent overall.
Adjust relevant comments to reflect these API redefinitions.
Arguably, we should change the pre-9.5 branches as well, but since
there are no known failure cases there, it seems not worth the risk.
Peter Geoghegan, per report from Bernd Helmle. Reviewed by Kyotaro
Horiguchi; thanks also to Andreas Seltenreich for extracting a
self-contained test case.
Discussion: https://postgr.es/m/1512661638.9720.34.camel@oopsware.de
Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.
Track relica origin replay progress for 2PC.
(Edited from patch 0003 in the logical decoding 2PC series.)
Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund
Resolve build farm failures from c203d6cf81,
diagnosed by Tom Lane.
The output of pg_stat_get_xact_tuples_hot_updated() and friends
is not guaranteed to show anything after the transaction completes.
Data is flushed slowly to stats collector, so using them can
give timing issues.
Instead using memset to set tts_isnull, call the new
slot_getmissingattrs().
Also fix a bug (= instead of >=) in the code generation. Normally = is
correct, but when repeatedly deforming fields not in a
tuple (e.g. deform up to natts + 1 and then natts + 2) >= is needed.
Discussion: https://postgr.es/m/20180328010053.i2qvsuuusst4lgmc@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
It seems that all buildfarm members are now using the <stdbool.h> code
path, so that none of them report "bool" as a typedef. We still need it
to be treated that way, so adjust pgindent to force that whether or not
it's in the given list.
Also, the recent introduction of LLVM infrastructure has caused the
appearance of some typedef names that we definitely *don't* want
treated as typedefs, such as "string" and "abs". Extend the existing
blacklist to include these. (Additions based on comparing v10's
typedefs list to what the buildfarm is currently emitting.)
Rearrange the code so that the lists of whitelisted/blacklisted
names are a bit easier to find and modify.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/28690.1521912334@sss.pgh.pa.us
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Previously, PQhost didn't return the connected host details when the
connection type was CHT_HOST_ADDRESS (i.e., via hostaddr). Instead, it
returned the complete host connection parameter (which could contain
multiple hosts) or the default host details, which was confusing and
arguably incorrect.
Change this to return the actually connected host or hostaddr
irrespective of the connection type. When hostaddr but no host was
specified, hostaddr is now returned. Never return the original host
connection parameter, and document that PQhost cannot be relied on
before the connection is established.
PQport is similarly changed to always return the active connection port
and never the original connection parameter.
Author: Hari Babu <kommi.haribabu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
