Add ability for to_char() to output the timezone's UTC offset (OF). We
already have the ability to return the timezone abbeviation (TZ/tz).
Per request from Andrew Dunstan
The pglz compressor has a significant startup cost, because it has to
initialize to zeros the history-tracking hash table. On a 64-bit system, the
hash table was 64kB in size. While clearing memory is pretty fast, for very
short inputs the relative cost of that was quite large.
This patch alleviates that in two ways. First, instead of storing pointers
in the hash table, store 16-bit indexes into the hist_entries array. That
slashes the size of the hash table to 1/2 or 1/4 of the original, depending
on the pointer width. Secondly, adjust the size of the hash table based on
input size. For very small inputs, you don't need a large hash table to
avoid collisions.
Review by Amit Kapila.
We don't normally bother retrying when the number of bytes written by
write() is short of what was requested. It is generally assumed that a
write() to disk doesn't return short, unless you run out of disk space.
While writing the WAL, however, it seems prudent to try a bit harder,
because a failure leads to PANIC. The write() is also much larger than most
write()s in the backend (up to wal_buffers), so there's more room for
surprises.
Also retry on EINTR. All signals used in the backend are flagged SA_RESTART
nowadays, so it shouldn't happen, but better to be defensive.
On immediate shutdown, or during a restart-after-crash sequence,
postmaster used to send SIGQUIT (and then abandon ship if shutdown); but
this is not a good strategy if backends don't die because of that
signal. (This might happen, for example, if a backend gets tangled
trying to malloc() due to gettext(), as in an example illustrated by
MauMau.) This causes problems when later trying to restart the server,
because some processes are still attached to the shared memory segment.
Instead of just abandoning such backends to their fates, we now have
postmaster hang around for a little while longer, send a SIGKILL after
some reasonable waiting period, and then exit. This makes immediate
shutdown more reliable.
There is disagreement on whether it's best for postmaster to exit after
sending SIGKILL, or to stick around until all children have reported
death. If this controversy is resolved differently than what this patch
implements, it's an easy change to make.
Bug reported by MauMau in message 20DAEA8949EC4E2289C6E8E58560DEC0@maumau
MauMau and Álvaro Herrera
This results in a slightly less specific error message when OVER
is used in a context where we don't accept window functions, but
per discussion, it's worth it to get the benefit of not needing
to reserve this keyword any more. This same refactoring will
also let us avoid reserving some other keywords that we expect
to add in upcoming patches (specifically, IGNORE, RESPECT, and
FILTER).
Troels Nielsen, with minor changes by me
On many platforms the OS will round the sleep time to millisecond
resolution, but there is no reason for us to pre-emptively round the
argument to pg_usleep.
When the delay was measured in milliseconds and started from 1 ms, it
sometimes took many attempts until the logic that increases the delay by
multiplying with a random value between 1 and 2 actually managed to bump it
from 1 ms to 2 ms. That lead to a sequence of 1 ms waits until the delay
started to increase. This wasn't really a problem but it looked odd if you
observed the waits. There is no measurable difference in performance, but
it's more readable this way.
Jeff Janes
The MaxAllocSize guard is convenient for most callers, because it
reduces the need for careful attention to overflow, data type selection,
and the SET_VARSIZE() limit. A handful of callers are happy to navigate
those hazards in exchange for the ability to allocate a larger chunk.
Introduce MemoryContextAllocHuge() and repalloc_huge(). Use this in
tuplesort.c and tuplestore.c, enabling internal sorts of up to INT_MAX
tuples, a factor-of-48 increase. In particular, B-tree index builds can
now benefit from much-larger maintenance_work_mem settings.
Reviewed by Stephen Frost, Simon Riggs and Jeff Janes.
Valgrind "client requests" in aset.c and mcxt.c teach Valgrind and its
Memcheck tool about the PostgreSQL allocator. This makes Valgrind
roughly as sensitive to memory errors involving palloc chunks as it is
to memory errors involving malloc chunks. Further client requests in
PageAddItem() and printtup() verify that all bits being added to a
buffer page or furnished to an output function are predictably-defined.
Those tests catch failures of C-language functions to fully initialize
the bits of a Datum, which in turn stymie optimizations that rely on
_equalConst(). Define the USE_VALGRIND symbol in pg_config_manual.h to
enable these additions. An included "suppression file" silences nominal
errors we don't plan to fix.
Reviewed in earlier versions by Peter Geoghegan and Korry Douglas.
Move some repeated debugging code into functions and store intermediates
in variables where not presently necessary. No code-generation changes
in a production build, and no functional changes. This simplifies and
focuses the main patch.
Every other core buffer page consumer initializes the bytes it furnishes
to PageAddItem(). For consistency, do the same here. No back-patch;
regardless, we couldn't count on the fix so long as binary upgrade can
carry forward affected index builds.
GNU gettext selects a default encoding for the messages it emits in a
platform-specific manner; it uses the Windows ANSI code page on Windows
and follows LC_CTYPE on other platforms. This is inconvenient for
PostgreSQL server processes, so realize consistent cross-platform
behavior by calling bind_textdomain_codeset() on Windows each time we
permanently change LC_CTYPE. This primarily affects SQL_ASCII databases
and processes like the postmaster that do not attach to a database,
making their behavior consistent with PostgreSQL on non-Windows
platforms. Messages from SQL_ASCII databases use the encoding implied
by the database LC_CTYPE, and messages from non-database processes use
LC_CTYPE from the postmaster system environment. PlatformEncoding
becomes unused, so remove it.
Make write_console() prefer WriteConsoleW() to write() regardless of the
encodings in use. In this situation, write() will invariably mishandle
non-ASCII characters.
elog.c has assumed that messages conform to the database encoding.
While usually true, this does not hold for SQL_ASCII and MULE_INTERNAL.
Introduce MessageEncoding to track the actual encoding of message text.
The present consumers are Windows-specific code for converting messages
to UTF16 for use in system interfaces. This fixes the appearance in
Windows event logs and consoles of translated messages from SQL_ASCII
processes like the postmaster. Note that SQL_ASCII inherently disclaims
a strong notion of encoding, so non-ASCII byte sequences interpolated
into messages by %s may yet yield a nonsensical message. MULE_INTERNAL
has similar problems at present, albeit for a different reason: its lack
of libiconv support or a conversion to UTF8.
Consequently, one need no longer restart Windows with a different
Windows ANSI code page to broadly test backend logging under a given
language. Changing the user's locale ("Format") is enough. Several
accounts can simultaneously run postmasters under different locales, all
correctly logging localized messages to Windows event logs and consoles.
Alexander Law and Noah Misch
Clang 3.3 correctly complains that a variable of type enum
MultiXactStatus cannot hold a value of -1, which makes sense. Change
the declared type of the variable to int instead, and apply casting as
necessary to avoid the warning.
Per notice from Andres Freund
In replication, when we shutdown the master, walsender tries to send
all the outstanding WAL records to the standby, and then to exit. This
basically means that all the WAL records are fully synced between
two servers after the clean shutdown of the master. So, after
promoting the standby to new master, we can restart the stopped
master as new standby without the need for a fresh backup from
new master.
But there was one problem so far: though walsender tries to send all
the outstanding WAL records, it doesn't wait for them to be replicated
to the standby. Then, before receiving all the WAL records,
walreceiver can detect the closure of connection and exit. We cannot
guarantee that there is no missing WAL in the standby after clean
shutdown of the master. In this case, backup from new master is
required when restarting the stopped master as new standby.
This patch fixes this problem. It just changes walsender so that it
waits for all the outstanding WAL records to be replicated to the
standby before closing the replication connection.
Per discussion, this is a fix that needs to get backpatched rather than
new feature. So, back-patch to 9.1 where enough infrastructure for
this exists.
Patch by me, reviewed by Andres Freund.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
Most of the documentation uses "single-user mode", so use that in the
code as well. Adjust the documentation to match the new error message
wording. Also add a documentation index entry for "single-user mode".
Based-on-patch-by: Jeff Janes <jeff.janes@gmail.com>
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
This avoids platform-dependent behavior wherein pg_sleep() might fail to be
interrupted by statement timeout, query cancel, SIGTERM, etc. Also, since
there's no reason to wake up once a second any more, we can reduce the
power consumption of a sleeping backend a tad.
Back-patch to 9.3, since use of SA_RESTART for SIGALRM makes this a bigger
issue than it used to be.
The exclusion of SIGALRM dates back to Berkeley days, when Postgres used
SIGALRM in only one very short stretch of code. Nowadays, allowing it to
interrupt kernel calls doesn't seem like a very good idea, since its use
for statement_timeout means SIGALRM could occur anyplace in the code, and
there are far too many call sites where we aren't prepared to deal with
EINTR failures. When third-party code is taken into consideration, it
seems impossible that we ever could be fully EINTR-proof, so better to
use SA_RESTART always and deal with the implications of that. One such
implication is that we should not assume pg_usleep() will be terminated
early by a signal. Therefore, long sleeps should probably be replaced
by WaitLatch operations where practical.
Back-patch to 9.3 so we can get some beta testing on this change.
SP-GiST's original scheme for avoiding deadlocks during concurrent index
insertions doesn't work, as per report from Hailong Li, and there isn't any
evident way to make it work completely. We could possibly lock individual
inner tuples instead of their whole pages, but preliminary experimentation
suggests that the performance penalty would be huge. Instead, if we fail
to get a buffer lock while descending the tree, just restart the tree
descent altogether. We keep the old tuple positioning rules, though, in
hopes of reducing the number of cases where this can happen.
Teodor Sigaev, somewhat edited by Tom Lane
elog.c has historically treated LOG messages as low-priority during
bootstrap and standalone operation. This has led to confusion and even
masked a bug, because the normal expectation of code authors is that
elog(LOG) will put something into the postmaster log, and that wasn't
happening during initdb. So get rid of the special-case rule and make
the priority order the same as it is in normal operation. To keep from
cluttering initdb's output and the behavior of a standalone backend,
tweak the severity level of three messages routinely issued by xlog.c
during startup and shutdown so that they won't appear in these cases.
Per my proposal back in December.
pg_filedump and other external utility programs are likely to want to be
able to check Postgres page checksums. To avoid messy duplication of code,
move the checksumming functionality into an exported header file, much as
we did awhile back for the CRC code.
In passing, get rid of an unportable assumption that a static char[] array
will be word-aligned, and do some other minor code beautification.
In most scenarios a portal without a ResourceOwner is dead and not subject
to any further execution, but a portal for a cursor WITH HOLD remains in
existence with no ResourceOwner after the creating transaction is over.
In this situation, if we attempt to "execute" the portal directly to fetch
data from it, we were setting CurrentResourceOwner to NULL, leading to a
segfault if the datatype output code did anything that required a resource
owner (such as trying to fetch system catalog entries that weren't already
cached). The case appears to be impossible to provoke with stock libpq,
but psqlODBC at least is able to cause it when working with held cursors.
Simplest fix is to just skip the assignment to CurrentResourceOwner, so
that any resources used by the data output operations will be managed by
the transaction-level resource owner instead. For consistency I changed
all the places that install a portal's resowner as current, even though
some of them are probably not reachable with a held cursor's portal.
Per report from Joshua Berry (with thanks to Hiroshi Inoue for developing
a self-contained test case). Back-patch to all supported versions.
Several loops in the JSON parser examined a byte in memory just before
checking whether its address was in-bounds, so they could read one byte
beyond the datum's allocation. A SIGSEGV is possible. New in 9.3, so
no back-patch.
Since commit f21bb9cfb5, this function
ignores the caller-provided length and loops until it finds a
terminator, which GetVirtualXIDsDelayingChkpt() never adds. Restore the
previous loop control logic. In passing, revert the addition of an
unused variable by the same commit, presumably a debugging relic.
Consumers are entitled to read the full 64 bytes pertaining to a Name;
using a shorter NULL-terminated string leads to reading beyond the end
its allocation; a SIGSEGV is possible. Use the frequent idiom of
copying to a NameData on the stack. New in 9.3, so no back-patch.
Extend the FDW API (which we already changed for 9.3) so that an FDW can
report whether specific foreign tables are insertable/updatable/deletable.
The default assumption continues to be that they're updatable if the
relevant executor callback function is supplied by the FDW, but finer
granularity is now possible. As a test case, add an "updatable" option to
contrib/postgres_fdw.
This patch also fixes the information_schema views, which previously did
not think that foreign tables were ever updatable, and fixes
view_is_auto_updatable() so that a view on a foreign table can be
auto-updatable.
initdb forced due to changes in information_schema views and the functions
they rely on. This is a bit unfortunate to do post-beta1, but if we don't
change this now then we'll have another API break for FDWs when we do
change it.
Dean Rasheed, somewhat editorialized on by Tom Lane
Per discussion on -hackers. We treat Unicode escapes when unescaping
them similarly to the way we treat them in PostgreSQL string literals.
Escapes in the ASCII range are always accepted, no matter what the
database encoding. Escapes for higher code points are only processed in
UTF8 databases, and attempts to process them in other databases will
result in an error. \u0000 is never unescaped, since it would result in
an impermissible null byte.
We need to increment the refcount on the composite type's cached tuple
descriptor while we do lookups of its column types. Otherwise a cache
flush could occur and release the tuple descriptor before we're done with
it. This fails reliably with -DCLOBBER_CACHE_ALWAYS, but the odds of a
failure in a production build seem rather low (since the pfree'd descriptor
typically wouldn't get scribbled on immediately). That may explain the
lack of any previous reports. Buildfarm issue noted by Christian Ullrich.
Back-patch to 9.1 where the bogus code was added.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
Per discussion, this restriction isn't needed for any real security reason,
and it seems to confuse people more often than it helps them. It could
also result in some database states being unrestorable. So just drop it.
Back-patch to 9.0, where ALTER DEFAULT PRIVILEGES was introduced.
AllocateFile(), AllocateDir(), and some sister routines share a small array
for remembering requests, so that the files can be closed on transaction
failure. Previously that array had a fixed size, MAX_ALLOCATED_DESCS (32).
While historically that had seemed sufficient, Steve Toutant pointed out
that this meant you couldn't scan more than 32 file_fdw foreign tables in
one query, because file_fdw depends on the COPY code which uses
AllocateFile(). There are probably other cases, or will be in the future,
where this nonconfigurable limit impedes users.
We can't completely remove any such limit, at least not without a lot of
work, since each such request requires a kernel file descriptor and most
platforms limit the number we can have. (In principle we could
"virtualize" these descriptors, as fd.c already does for the main VFD pool,
but not without an additional layer of overhead and a lot of notational
impact on the calling code.) But we can at least let the array size be
configurable. Hence, change the code to allow up to max_safe_fds/2
allocated file requests. On modern platforms this should allow several
hundred concurrent file_fdw scans, or more if one increases the value of
max_files_per_process. To go much further than that, we'd need to do some
more work on the data structure, since the current code for closing
requests has potentially O(N^2) runtime; but it should still be all right
for request counts in this range.
Back-patch to 9.1 where contrib/file_fdw was introduced.
Long-standing code has called tolower() on identifier character bytes
with the high bit set. This is clearly an error and produces junk output
when the encoding is multi-byte. This patch therefore restricts this
activity to cases where there is a character with the high bit set AND
the encoding is single-byte.
There have been numerous gripes about this, most recently from Martin
Schäfer.
Backpatch to all live releases.
In 9.2, Unicode escape sequences are not analysed at all other than
to make sure that they are in the form \uXXXX. But in 9.3 many of the
new operators and functions try to turn JSON text values into text in
the server encoding, and this includes de-escaping Unicode escape
sequences. This processing had not taken into account the possibility
that this might contain a surrogate pair to designate a character
outside the BMP. That is now handled correctly.
This also enforces correct use of surrogate pairs, something that is not
done by the type's input routines. This fact is noted in the docs.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
In commit 2c92edad48, I broke "EXPLAIN
(ANALYZE)" syntax, because I mistakenly thought that ANALYZE/ANALYSE were
only partially reserved and thus would be included in NonReservedWord;
but actually they're fully reserved so they still need to be called out
here.
A nicer solution would be to demote these words to type_func_name_keyword
status (they can't be less than that because of "VACUUM [ANALYZE] ColId").
While that works fine so far as the core grammar is concerned, it breaks
ECPG's grammar for reasons I don't have time to isolate at the moment.
So do this for the time being.
Per report from Kevin Grittner. Back-patch to 9.0, like the previous
commit.
The new message (and SQLSTATE) matches the corresponding error cases in
namespace.c.
This was thought to be a "can't happen" case when extension.c was written,
so we didn't think hard about how to report it. But it definitely can
happen in 9.2 and later, since we no longer require search_path to contain
any valid schema names. It's probably also possible in 9.1 if search_path
came from a noninteractive source. So, back-patch to all releases
containing this code.
Per report from Sean Chittenden, though this isn't exactly his patch.
The array allocated by GetRunningTransactionLocks() needs to be pfree'd
when we're done with it. Otherwise we leak some memory during each
checkpoint, if wal_level = hot_standby. This manifests as memory bloat
in the checkpointer process, or in bgwriter in versions before we made
the checkpointer separate.
Reported and fixed by Naoya Anzai. Back-patch to 9.0 where the issue
was introduced.
In passing, improve comments for GetRunningTransactionLocks(), and add
an Assert that we didn't overrun the palloc'd array.
Bruce Momjian
Heikki Linnakangas
Simon Riggs
Alvaro Herrera
Robert Haas
Noah Misch
Fujii Masao
Peter Eisentraut
Jeff Davis
Tom Lane
Andrew Dunstan