transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
Here's another attempt at fixing the logic that decides how far the WAL can
be streamed, which was still broken if the timeline changed while streaming.
You would get an assertion failure. The way the logic is now written is more
readable, too.
Thom Brown reported the assertion failure.
If a relation file was removed when the server-side counterpart of
pg_basebackup was just about to open it to send it to the client, you'd
get a "could not open file" error. Fix that.
Backpatch to 9.1, this goes back to when pg_basebackup was introduced.
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
This was broken before, we would recycle old WAL segments on wrong timeline
after the recovery target timeline had changed, but my recent commit to
not initialize ThisTimeLineID at all in a standby's checkpointer process
broke this completely.
The problem is that when installing a recycled WAL segment as a future one,
ThisTimeLineID is used to construct the filename. To fix, always update
ThisTimeLineID to the current timeline being recovered, before recycling
WAL segments at a restartpoint.
This still leaves a small window where we might install WAL segments under
wrong timeline ID, if the timeline is changed just as we're about to start
recycling. Also, even if we're replaying timeline X at the momnent, there's
no guarantee that we'll need as many WAL segments on that timeline as we
recycle. We might be just about to reach the point where we switch to next
timeline, so might only need one more WAL segment on the current timeline.
We'll live with the waste in that situation.
Bug pointed out by Fujii Masao. 9.1 and 9.2 had the same issue, when
recovery target timeline was changed, but I committed a slightly different
version of this patch on those branches.
Most of the time, the last replayed record comes from the recovery target
timeline, but there is a corner case where it makes a difference. When
the startup process scans for a new timeline, and decides to change recovery
target timeline, there is a window where the recovery target TLI has already
been bumped, but there are no WAL segments from the new timeline in pg_xlog
yet. For example, if we have just replayed up to point 0/30002D8, on
timeline 1, there is a WAL file called 000000010000000000000003 in pg_xlog
that contains the WAL up to that point. When recovery switches recovery
target timeline to 2, a walsender can immediately try to read WAL from
0/30002D8, from timeline 2, so it will try to open WAL file
000000020000000000000003. However, that doesn't exist yet - the startup
process hasn't copied that file from the archive yet nor has the walreceiver
streamed it yet, so walsender fails with error "requested WAL segment
000000020000000000000003 has already been removed". That's harmless, in that
the standby will try to reconnect later and by that time the segment is
already created, but error messages that should be ignored are not good.
To fix that, have walsender track the TLI of the last replayed record,
instead of the recovery target timeline. That way walsender will not try to
read anything from timeline 2, until the WAL segment has been created and at
least one record has been replayed from it. The recovery target timeline is
now xlog.c's internal affair, it doesn't need to be exposed in shared memory
anymore.
This fixes the error reported by Thom Brown. depesz the same error message,
but I'm not sure if this fixes his scenario.
We used to set it to the current recovery target timeline, but the recovery
target timeline can change during recovery, leaving ThisTimeLineID at an
old value. That seems worse than always leaving it at zero to begin with.
AFAICS there was no good reason to set it in the first place. ThisTimeLineID
is not needed in checkpointer or bgwriter process, until it's time to write
the end-of-recovery checkpoint, and at that point ThisTimeLineID is updated
anyway.
If you restored from a backup taken from a standby, and the last record in
the backup is the checkpoint record, ie. there is no redo required except
for the checkpoint record, we would fail to notice that we've reached the
end-of-backup point, and the database is consistent. The result was an
error "WAL ends before end of online backup". To fix, move the
have-we-reached-end-of-backup check into CheckRecoveryConsistency(), which
is already responsible for similar checks with minRecoveryPoint, and is
called in the right places.
Backpatch to 9.2, this check and bug did not exist before that.
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc3 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
We failed to ever fill the sixth line (LISTEN_ADDR), which caused the
attempt to fill the seventh line (SHMEM_KEY) to fail, so that the shared
memory key never got added to the file in standalone mode. This has been
broken since we added more content to our lock files in 9.1.
To fix, tweak the logic in CreateLockFile to add an empty LISTEN_ADDR
line in standalone mode. This is a tad grotty, but since that function
already knows almost everything there is to know about the contents of
lock files, it doesn't seem that it's any better to hack it elsewhere.
It's not clear how significant this bug really is, since a standalone
backend should never have any children and thus it seems not critical
to be able to check the nattch count of the shmem segment externally.
But I'm going to back-patch the fix anyway.
This problem had escaped notice because of an ancient (and in hindsight
pretty dubious) decision to suppress LOG-level messages by default in
standalone mode; so that the elog(LOG) complaint in AddToDataDirLockFile
that should have warned of the problem didn't do anything. Fixing that
is material for a separate patch though.
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
If a tuple is larger than page size minus space reserved for fillfactor,
heap_multi_insert would never find a page that it fits in and repeatedly ask
for a new page from RelationGetBufferForTuple. If a tuple is too large to
fit on any page, taking fillfactor into account, RelationGetBufferForTuple
will always expand the relation. In a normal insert, heap_insert will accept
that and put the tuple on the new page. heap_multi_insert, however, does a
fillfactor check of its own, and doesn't accept the newly-extended page
RelationGetBufferForTuple returns, even though there is no other choice to
make the tuple fit.
Fix that by making the logic in heap_multi_insert more like the heap_insert
logic. The first tuple is always put on the page RelationGetBufferForTuple
gives us, and the fillfactor check is only applied to the subsequent tuples.
Report from David Gould, although I didn't use his patch.
The dynahash code requires the number of buckets in a hash table to fit
in an int; but since we calculate the desired hash table size dynamically,
there are various scenarios where we might calculate too large a value.
The resulting overflow can lead to infinite loops, division-by-zero
crashes, etc. I (tgl) had previously installed some defenses against that
in commit 299d171652, but that covered only one
call path. Moreover it worked by limiting the request size to work_mem,
but in a 64-bit machine it's possible to set work_mem high enough that the
problem appears anyway. So let's fix the problem at the root by installing
limits in the dynahash.c functions themselves.
Trouble report and patch by Jeff Davis.
In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.
This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.
While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.
The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.
This problem exists in all supported versions but is infrequently
reported, although some reports of performance problems when
autovacuum runs might be caused by this. Initial commit is just the
master branch, but this should probably be backpatched once the
build farm and general developer usage confirm that there are no
surprising effects.
Jan Wieck
EndRecPtr is the last record that we've read, but not necessarily yet
replayed. CheckRecoveryConsistency should compare minRecoveryPoint with the
last replayed record instead. This caused recovery to think it's reached
consistency too early.
Now that we do the check in CheckRecoveryConsistency correctly, we have to
move the call of that function to after redoing a record. The current place,
after reading a record but before replaying it, is wrong. In particular, if
there are no more records after the one ending at minRecoveryPoint, we don't
enter hot standby until one extra record is generated and read by the
standby, and CheckRecoveryConsistency is called. These two bugs conspired
to make the code appear to work correctly, except for the small window
between reading the last record that reaches minRecoveryPoint, and
replaying it.
In the passing, rename recoveryLastRecPtr, which is the last record
replayed, to lastReplayedEndRecPtr. This makes it slightly less confusing
with replayEndRecPtr, which is the last record read that we're about to
replay.
Original report from Kyotaro HORIGUCHI, further diagnosis by Fujii Masao.
Backpatch to 9.0, where Hot Standby subtly changed the test from
"minRecoveryPoint < EndRecPtr" to "minRecoveryPoint <= EndRecPtr". The
former works because where the test is performed, we have always read one
more record than we've replayed.
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Per report from Kyotaro HORIGUCHI. Backpatch to 8.4. Before that,
minRecoveryPoint was not updated during recovery at all.
Forgot to update it at the right place. Also, consider checkpoint record
that switches to new timelne to be on the new timeline.
This fixes erroneous "requested timeline 2 does not contain minimum recovery
point" errors, pointed out by Amit Kapila while testing another patch.
Commit 729205571e added privileges on data
types, but there were a number of oversights. The implementation of
default privileges for types missed a few places, and pg_dump was
utterly innocent of the whole concept. Per bug #7741 from Nathan Alden,
and subsequent wider investigation.
This patch makes "simple" views automatically updatable, without the need
to create either INSTEAD OF triggers or INSTEAD rules. "Simple" views
are those classified as updatable according to SQL-92 rules. The rewriter
transforms INSERT/UPDATE/DELETE commands on such views directly into an
equivalent command on the underlying table, which will generally have
noticeably better performance than is possible with either triggers or
user-written rules. A view that has INSTEAD OF triggers or INSTEAD rules
continues to operate the same as before.
For the moment, security_barrier views are not considered simple.
Also, we do not support WITH CHECK OPTION. These features may be
added in future.
Dean Rasheed, reviewed by Amit Kapila
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
When deleteOneObject closes and reopens the pg_depend relation,
we must see to it that the relcache pointer held by the calling function
(typically performMultipleDeletions) is updated. Usually the relcache
entry is retained so that the pointer value doesn't change, which is why
the problem had escaped notice ... but after a cache flush event there's
no guarantee that the same memory will be reassigned. To fix, change
the recursive functions' APIs so that we pass around a "Relation *"
not just "Relation".
Per investigation of occasional buildfarm failures. This is trivial
to reproduce with -DCLOBBER_CACHE_ALWAYS, which points up the sad
lack of any buildfarm member running that way on a regular basis.
If we're not in hot standby mode, then there's no way for users to connect
to reset the recoveryPause flag, so we shouldn't pause. The code was aware
of this but the test to see if pausing was safe was seriously inadequate:
it wasn't paying attention to reachedConsistency, and besides what it was
testing was that we could legally enter hot standby, not that we have
done so. Get rid of that in favor of checking LocalHotStandbyActive,
which because of the coding in CheckRecoveryConsistency is tantamount to
checking that we have told the postmaster to enter hot standby.
Also, move the recoveryPausesHere() call that reacts to asynchronous
recoveryPause requests so that it's not in the middle of application of a
WAL record. I put it next to the recoveryStopsHere() call --- in future
those are going to need to interact significantly, so this seems like a
good waystation.
Also, don't bother trying to read another WAL record if we've already
decided not to continue recovery. This was no big deal when the code was
written originally, but now that reading a record might entail actions like
fetching an archive file, it seems a bit silly to do it like that.
Per report from Jeff Janes and subsequent discussion. The pause feature
needs quite a lot more work, but this gets rid of some indisputable bugs,
and seems safe enough to back-patch.
When waiting for an XLOG_BACKUP_RECORD the minRecoveryPoint
will be incorrect, so we must not declare recovery as consistent
before we have seen the record. Major bug allowing recovery to end
too early in some cases, allowing people to see inconsistent db.
This patch to HEAD and 9.2, other fix required for 9.1 and 9.0
Simon Riggs and Andres Freund, bug report by Jeff Janes
This allows us to do some more rigorous sanity checking for various
incorrect point-in-time recovery scenarios, and provides more information
for debugging purposes. It will also come handy in the upcoming patch to
allow timeline switches to be replicated by streaming replication.
This allows recovery to notice certain incorrect recovery scenarios.
If a server has recovered to point X on timeline 5, and you restart
recovery, it better be on timeline 5 when it reaches point X again, not on
some timeline with a higher ID. This can happen e.g if you a standby server
is shut down, a new timeline appears in the WAL archive, and the standby
server is restarted. It will try to follow the new timeline, which is wrong
because some WAL on the old timeline was already replayed before shutdown.
Requires an initdb (or at least pg_resetxlog), because this adds a field to
the control file.
During VACUUM if we pause to perform a cycle
of index cleanup we drop the vmbuffer pin,
so we should do the same thing when heap
scan completes. This avoids holding vmbuffer
pin across the main index cleanup in VACUUM,
which could be minutes or hours longer than
necessary for correctness.
Bug report and suggested fix from Pavan Deolasee
Rename PGXACT->inCommit flag into delayChkpt flag,
and generalise comments to allow use in other situations,
such as the forthcoming potential use in checksum patch.
Replace wait loop to look for VXIDs with delayChkpt set.
No user visible changes, not behaviour changes at present.
Simon Riggs, reviewed and rebased by Jeff Davis
Update README to explain prerequisites for
correct access to LSN fields of a page.
Independent chunk removed from checksums
patch to reduce size of patch.
Allow support only for freezing tuples by explicit
command. Previous coding mistakenly extended
slightly beyond what was agreed as correct on -hackers.
So essentially a partial revoke of earlier work,
leaving just the COPY FREEZE command.
This reverts commit c11130690d in favor of
actually fixing the problem: namely, that we should never have been
modifying the checkpoint record's nextXid at this point to begin with.
The nextXid should match the state as of the checkpoint's logical WAL
position (ie the redo point), not the state as of its physical position.
It's especially bogus to advance it in some wal_levels and not others.
In any case there is no need for the checkpoint record to carry the
same nextXid shown in the XLOG_RUNNING_XACTS record just emitted by
LogStandbySnapshot, as any replay operation will already have adopted
that value as current.
This fixes bug #7710 from Tarvi Pillessaar, and probably also explains bug
#6291 from Daniel Farina, in that if a checkpoint were in progress at the
instant of XID wraparound, the epoch bump would be lost as reported.
(And, of course, these days there's at least a 50-50 chance of a checkpoint
being in progress at any given instant.)
Diagnosed by me and independently by Andres Freund. Back-patch to all
branches supporting hot standby.
Previously we stored all xids mixed together.
Now we store top-level xids first, followed
by all subxids. Also skip logging any subxids
if the snapshot is suboverflowed, since there
are potentially large numbers of them and they
are not useful in that case anyway. Has value
in the envisaged design for decoding of WAL.
No planned effect on Hot Standby.
Andres Freund, reviewed by me
If wal_level = hot_standby we update the checkpoint nextxid,
though in the case where a wraparound occurred half-way through
a checkpoint we would neglect updating the epoch also. Updating
the nextxid is arguably the wrong thing to do, but changing that
may introduce subtle bugs into hot standby startup, while updating
the value doesn't cause any known bugs yet. Minimal fix now to
HEAD and backbranches, wider fix later in HEAD.
Bug reported in #6291 by Daniel Farina and slightly differently in
Cause analysis and recommended fixes from Tom Lane and Andres Freund.
Applied patch is minimal version of Andres Freund's work.
