This commit required support for inline variable definition, which is
not a requirement.
RELEASE NOTE AUTHOR: the author of commit 3c0471b5fd
(pg_upgrade/tablespaces) was Justin Pryzby, not me.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20201016001959.h24fkywfubkv2pc5@alap3.anarazel.de
Backpatch-through: 9.5
Previously, if pg_upgrade failed, and the user recreated the cluster but
did not remove the new cluster tablespace directory, a later pg_upgrade
would fail since the new tablespace directory would already exists.
This adds error reporting for this during check.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200925005531.GJ23631@telsasoft.com
Backpatch-through: 9.5
Previously we only copied the function attributes. That caused problems at
least on s390x: Because we didn't copy the 'zeroext' attribute for
ExecAggTransReparent()'s *IsNull parameters, expressions invoking it didn't
ensure that the upper bytes of the registers were zeroed. In the - relatively
rare - cases where not, ExecAggTransReparent() wrongly ended up in the
newValueIsNull branch due to the register not being zero. Subsequently causing
a crash.
It's quite possible that this would cause problems on other platforms, and in
other places than just ExecAggTransReparent() on s390x.
Thanks to Christoph (and the Debian project) for providing me with access to a
s390x machine, allowing me to debug this.
Reported-By: Christoph Berg
Author: Andres Freund
Discussion: https://postgr.es/m/20201015083246.kie5726xerdt3ael@alap3.anarazel.de
Backpatch: 11-, where JIT was added
While registering for postmaster exit events, we have to handle a couple
of edge cases where the postmaster is already gone. Commit 815c2f09
missed one: EACCES must surely imply that PostmasterPid no longer
belongs to our postmaster process (or alternatively an unexpected
permissions model has been imposed on us). Like ESRCH, this should be
treated as a WL_POSTMASTER_DEATH event, rather than being raised with
ereport().
No known problems reported in the wild. Per code review from Tom Lane.
Back-patch to 13.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3624029.1602701929%40sss.pgh.pa.us
Previously it was documented that toast_tuple_target affected column
marked as only External or Extended. But this description is not correct
and toast_tuple_target affects also column marked as Main.
Back-patch to v11 where toast_tuple_target reloption was introduced.
Author: Shinya Okano
Reviewed-by: Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/93f46e311a67422e89e770d236059817@oss.nttdata.com
I removed the duplicate command tags for START_REPLICATION inadvertently
in commit 07082b08cc, but the replication protocol requires them. The
fact that the replication protocol was broken was not noticed because
all our test cases use an optimized code path that exits early, failing
to verify that the behavior is correct for non-optimized cases. Put
them back.
Also document this protocol quirk.
Add a test case that shows the failure. It might still succeed even
without the patch when run on a fast enough server, but it suffices to
show the bug in enough cases that it would be noticed in buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Henry Hinze <henry.hinze@gmail.com>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/16643-eaadeb2a1a58d28c@postgresql.org
If WaitEventSetWait() reports that the postmaster has gone away, later
calls to WaitEventSetWait() should continue to report that. Otherwise
further waits that occur in the proc_exit() path after we already
noticed the postmaster's demise could block forever.
Back-patch to 13, where the kqueue support landed.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3624029.1602701929%40sss.pgh.pa.us
Our infinite_recurse() test to verify sane stack-overrun behavior
is affected by a bug of the Linux kernel on PPC64: it will get SIGSEGV
if it receives a signal when the stack depth is (a) over 1MB and
(b) within a few kB of filling the current physical stack allocation.
See https://bugzilla.kernel.org/show_bug.cgi?id=205183.
Since this test is a bit time-consuming and we run it in parallel with
test scripts that do a lot of DDL, it can be expected to get an sinval
catchup interrupt at some point, leading to failure if the timing is
wrong. This has caused more than 100 buildfarm failures over the
past year or so.
While a fix exists for the kernel bug, it might be years before that
propagates into all production kernels, particularly in some of the
older distros we have in the buildfarm. For now, let's just back off
and not run this test on Linux PPC64; that loses nothing in test
coverage so far as our own code is concerned.
To do that, split this test into a new script infinite_recurse.sql
and skip the test when the platform name is powerpc64...-linux-gnu.
Back-patch to v12. Branches before that have not been seen to get
this failure. No doubt that's because the "errors" test was not
run in parallel with other tests before commit 798070ec0, greatly
reducing the odds of an sinval catchup being necessary.
I also back-patched 3c8553547 into v12, just so the new regression
script would look the same in all branches having it.
Discussion: https://postgr.es/m/3479046.1602607848@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190723162703.GM22387%40telsasoft.com
gistRelocateBuildBuffersOnSplit did not get the memo about which
attribute count to use. This could lead to a crash if there were
included columns and buffering build was chosen. (Because there
are random page-split decisions elsewhere in GiST index build,
the crashes are not entirely deterministic.)
Back-patch to v12 where GiST gained support for included columns.
Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEECCV5m7wvxg46PC-7x-EybUmnpupBGhSFMoAAay+r6HQ@mail.gmail.com
The prohibitValueChange code paths in set_config_option(), which
are executed whenever we re-read a PGC_POSTMASTER variable from
postgresql.conf, neglected to free anything before exiting. Thus
we'd leak the proposed new value of a PGC_STRING variable, as noted
by BoChen in bug #16666. For all variable types, if the check hook
creates an "extra" chunk, we'd also leak that.
These are malloc not palloc chunks, so there is no mechanism for
recovering the leaks before process exit. Fortunately, the values
are typically not very large, meaning you'd have to go through an
awful lot of SIGHUP configuration-reload cycles to make the leakage
amount to anything. Still, for a long-lived postmaster process it
could potentially be a problem.
Oversight in commit 2594cf0e8. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16666-2c41a4eec61b03e1@postgresql.org
The implementation uses smaller code when the "expected" operand is a
small constant, but the implementation needlessly defined the set of
acceptable constants more narrowly than the ABI does. Core PostgreSQL
and PGXN don't use the constant path at all, so this is future-proofing.
Back-patch to v13, where commit 30ee5d17c2
introduced this code.
Reviewed by Tom Lane. Reported by Christoph Berg.
Discussion: https://postgr.es/m/20201009092825.GD889580@msg.df7cb.de
While xlc defines __64BIT__, gcc does not. Due to this oversight in
commit 30ee5d17c2, gcc builds continued
implementing 64-bit atomics by way of intrinsics. Back-patch to v13,
where that commit first appeared.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20201011051043.GA1724101@rfd.leadboat.com
It appears that commit cf63c641c, which intended to prevent
misoptimization of the result-building step in makeOrderedSetArgs,
didn't go far enough: buildfarm member hornet's version of xlc
is now optimizing back to the old, broken behavior in which
list_length(directargs) is fetched only after list_concat() has
changed that value. I'm not entirely convinced whether that's
an undeniable compiler bug or whether it can be justified by a
sufficiently aggressive interpretation of C sequence points.
So let's just change the code to make it harder to misinterpret.
Back-patch to all supported versions, just in case.
Discussion: https://postgr.es/m/1830491.1601944935@sss.pgh.pa.us
The date-vs-timestamp, date-vs-timestamptz, and timestamp-vs-timestamptz
comparators all worked by promoting the first type to the second and
then doing a simple same-type comparison. This works fine, except
when the conversion result is out of range, in which case we throw an
entirely avoidable error. The sources of such failures are
(a) type date can represent dates much farther in the future than
the timestamp types can;
(b) timezone rotation might cause a just-in-range timestamp value to
become a just-out-of-range timestamptz value.
Up to now we just ignored these corner-case issues, but now we have
an actual user complaint (bug #16657 from Huss EL-Sheikh), so let's
do something about it.
It turns out that commit 52ad1e659 already built all the necessary
infrastructure to support error-free comparisons, but neglected to
actually use it in the main-line code paths. Fix that, do a little
bit of code style review, and remove the now-duplicate logic in
jsonpath_exec.c.
Back-patch to v13 where 52ad1e659 came in. We could take this back
further by back-patching said infrastructure, but given the small
number of complaints so far, I don't feel a great need to.
Discussion: https://postgr.es/m/16657-cde2f876d8cc7971@postgresql.org
Commit 3eb3d3e78 was a few bricks shy of a load: while it correctly
set the table's "interesting" flag when deciding to dump the data of
an extension config table, it was not correct to clear that flag
if we concluded we shouldn't dump the data. This led to the crash
reported in bug #16655, because in fact we'll traverse dumpTableSchema
anyway for all extension tables (to see if they have user-added
seclabels or RLS policies).
The right thing to do is to force "interesting" true in makeTableDataInfo,
and otherwise leave the flag alone. (Doing it there is more future-proof
in case additional calls are added, and it also avoids setting the flag
unnecessarily if that function decides the table is non-dumpable.)
This investigation also showed that while only the --inserts code path
had an obvious failure in the case considered by 3eb3d3e78, the COPY
code path also has a problem with not having loaded table subsidiary
data. That causes fmtCopyColumnList to silently return an empty string
instead of the correct column list. That accidentally mostly works,
which perhaps is why we didn't notice this before. It would only fail
if the restore column order is different from the dump column order,
which only happens in weird inheritance cases, so it's not surprising
nobody had hit the case with an extension config table. Nonetheless,
it's a bug, and it goes a long way back, not just to v12 where the
--inserts code path started to have a problem with this.
In hopes of catching such cases a bit sooner in future, add some
Asserts that "interesting" has been set in both dumpTableData and
dumpTableSchema. Adjust the test case added by 3eb3d3e78 so that it
checks the COPY rather than INSERT form of that bug, allowing it to
detect the longer-standing symptom.
Per bug #16655 from Cameron Daniel. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/16655-5c92d6b3a9438137@postgresql.org
Discussion: https://postgr.es/m/18048b44-3414-b983-8c7c-9165b177900d@2ndQuadrant.com
This patch prevents crashes or wrong plans when partition-wise joins
are considered during GEQO planning, as a consequence of the
EquivalenceClass data structures becoming corrupt after a GEQO
context reset.
A remaining problem is that successive GEQO cycles will make multiple
copies of the required EC members, since add_child_join_rel_equivalences
has no idea that such members might exist already. For now we'll just
live with that. The lack of field complaints of crashes suggests that
this is a mighty little-used situation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/1683100.1601860653@sss.pgh.pa.us
get_eclass_for_sort_expr() computes expr_relids and nullable_relids
early on, even though they won't be needed unless we make a new
EquivalenceClass, which we often don't. Aside from the probably-minor
inefficiency, there's a memory management problem: these bitmapsets will
be built in the caller's context, leading to dangling pointers if that
is shorter-lived than root->planner_cxt. This would be a live bug if
get_eclass_for_sort_expr() could be called with create_it = true during
GEQO join planning. So far as I can find, the core code never does
that, but it's hard to be sure that no extensions do, especially since
the comments make it clear that that's supposed to be a supported case.
Fix by not computing these values until we've switched into planner_cxt
to build the new EquivalenceClass.
generate_join_implied_equalities() uses inner_rel->relids to look up
relevant eclasses, but it ought to be using nominal_inner_relids.
This is presently harmless because a child RelOptInfo will always have
exactly the same eclass_indexes as its topmost parent; but that might
not be true forever, and anyway it makes the code confusing.
The first of these is old (introduced by me in f3b3b8d5b), so back-patch
to all supported branches. The second only dates to v13, but we might
as well back-patch it to keep the code looking similar across branches.
Discussion: https://postgr.es/m/1508010.1601832581@sss.pgh.pa.us
The descriptions of make_interval() and pg_options_to_table()
were randomly different from the reality embedded in pg_proc.
(These are not all the discrepancies I found in a quick search,
but the others perhaps require more discussion, since there's
at least a case to be made for changing pg_proc not the docs.)
make_interval issue noted by Thomas Kellerer.
Discussion: https://postgr.es/m/7b154ef0-9f22-90b9-7734-4bf23686695b@gmx.net
I noticed while trying to run the regression tests under a low
geqo_threshold that one query on information_schema.columns had
unstable (as in, variable from one run to the next) output order.
This is pretty unsurprising given the complexity of the underlying
plan. Interestingly, of this test's three nigh-identical queries on
information_schema.columns, the other two already had ORDER BY clauses
guaranteeing stable output. Let's make this one look the same.
Back-patch to v10 where this test was added. We've not heard field
reports of the test failing, but this experience shows that it can
happen when testing under even slightly unusual conditions.
Commit 151c0c5f7 neglected the possibility that a TEMP_CONFIG file
would explicitly set max_wal_senders=0; as indeed buildfarm member
thorntail does, so that it can test wal_level=minimal in other test
suites. Hence, rather than assuming that max_wal_senders=10 will
prevail if we say nothing, set it explicitly.
Set max_replication_slots=10 explicitly too, just to be safe.
Back-patch to v10, like the previous patch.
Discussion: https://postgr.es/m/723911.1601417626@sss.pgh.pa.us
The error message about columns in the primary key not including all of
the partition key was unclear; reword it.
Backpatch all the way to pg11, where it appeared.
Reported-by: Nagaraj Raj <nagaraj.sf@yahoo.com>
Discussion: https://postgr.es/m/64062533.78364.1601415362244@mail.yahoo.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
PostgresNode.pm set "max_wal_senders = 5" for replication testing,
but this seems to be slightly too low for our current test suite.
Slower buildfarm members frequently report "number of requested standby
connections exceeds max_wal_senders" failures, due to old walsenders
not exiting instantaneously. Usually, the test does not fail overall
because of automatic walreceiver restart, but sometimes the failure
becomes visible; and in any case such retries slow down the test.
That value came in with commit 89ac7004d, but was soon obsoleted by
f6d6d2920, which raised the built-in default from zero to 10; so that
PostgresNode.pm is actually setting it to less than the conservative
built-in default. That seems pretty pointless, so let's remove the
special setting and let the default prevail, in hopes of making
the TAP tests more robust.
Likewise, the setting "max_replication_slots = 5" is obsolete and
can be removed.
While here, reverse-engineer a comment about why we're choosing
less-than-default values for some other settings.
(Note: before v12, max_wal_senders counted against max_connections
so that the latter setting also needs some fiddling with.)
Back-patch to v10 where the subscription tests were added.
It's likely that the older branches aren't pushing the boundaries
of max_wal_senders, but I'm disinclined to spend time trying to
figure out exactly when it started to be a problem.
Discussion: https://postgr.es/m/723911.1601417626@sss.pgh.pa.us
Explicitly mention that primary key constraints are also included in the
limitation that the constraint columns must be a superset of the partition key
columns.
Wording suggestion from Tom Lane.
Discussion: https://postgr.es/m/64062533.78364.1601415362244@mail.yahoo.com
Backpatch-through: 11, where unique constraints on partitioned tables were added
When executing a CALL or DO in a non-atomic context (i.e., not inside
a function or query), plpgsql creates a new plan each time through,
as a rather hacky solution to some resource management issues. But
it failed to free this plan until exit of the current procedure or DO
block, resulting in serious memory bloat in procedures that called
other procedures many times. Fix by remembering to free the plan,
and by being more honest about restoring the previous state (otherwise,
recursive procedure calls have a problem).
There was also a smaller leak associated with recalculation of the
"target" list of output variables. Fix that by using the statement-
lifespan context to hold non-permanent values.
Back-patch to v11 where procedures were introduced.
Pavel Stehule and Tom Lane
Discussion: https://postgr.es/m/CAFj8pRDiiU1dqym+_P4_GuTWm76knJu7z9opWayBJTC0nQGUUA@mail.gmail.com
The SQL standard doesn't require jsonpath .datetime() method to support the
ISO 8601 format. But our to_json[b]() functions convert timestamps to text in
the ISO 8601 format in the sake of compatibility with javascript. So, we add
support of the ISO 8601 to the jsonpath .datetime() in the sake compatibility
with to_json[b]().
The standard mode of datetime parsing currently supports just template patterns
and separators in the format string. In order to implement ISO 8601, we have to
add support of the format string double quotes to the standard parsing mode.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Backpatch-through: 13
bffe1bd684 has introduced jsonpath .datetime() method, but default formats
for time and timestamp contain excess space between time and timezone. This
commit removes this excess space making behavior of .datetime() method
standard-compliant.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov
Backpatch-through: 13
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
This addresses a couple of issues with the so-said subject:
- Report the correct parent relation with the index actually being
rebuilt or validated. Previously, the command status remained set to
the last index created for the progress of the index build and
validation, which would be incorrect when working on a table that has
more than one index.
- Use the correct phase when waiting before the drop of the old
indexes. Previously, this was reported with the same status as when
waiting before the old indexes are marked as dead.
Author: Matthias van de Meent, Michael Paquier
Discussion: https://postgr.es/m/CAEze2WhqFgcwe1_tv=sFYhLWV2AdpfukumotJ6JNcAOQs3jufg@mail.gmail.com
Backpatch-through: 12
We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
This function leaked some memory while loading qual clauses for
an RLS policy. While ordinarily negligible, that could build up
in some repeated-reload cases, as reported by Konstantin Knizhnik.
We can improve matters by borrowing the coding long used in
RelationBuildRuleLock: build stringToNode's result directly in
the target context, and remember to explicitly pfree the
input string.
This patch by no means completely guarantees zero leaks within
this function, since we have no real guarantee that the catalog-
reading subroutines it calls don't leak anything. However,
practical tests suggest that this is enough to resolve the issue.
In any case, any remaining leaks are similar to those risked by
RelationBuildRuleLock and other relcache-loading subroutines.
If we need to fix them, we should adopt a more global approach
such as that used by the RECOVER_RELATION_BUILD_MEMORY hack.
While here, let's remove the need for an expensive PG_TRY block by
using MemoryContextSetParent to reparent an initially-short-lived
context for the RLS data.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/21356c12-8917-8249-b35f-1c447231922b@postgrespro.ru
Parallel pg_dump failed if its -d parameter was a connection string
containing any essential information other than host, port, or username.
The same was true for pg_restore with --create.
The reason is that these scenarios failed to preserve the connection
string from the command line; the code felt free to replace that with
just the database name when reconnecting from a pg_dump parallel worker
or after creating the target database. By chance, parallel pg_restore
did not suffer this defect, as long as you didn't say --create.
In practice it seems that the error would be obvious only if the
connstring included essential, non-default SSL or GSS parameters.
This may explain why it took us so long to notice. (It also makes
it very difficult to craft a regression test case illustrating the
problem, since the test would fail in builds without those options.)
Fix by refactoring so that ConnectDatabase always receives all the
relevant options directly from the command line, rather than
reconstructed values. Inject a different database name, when necessary,
by relying on libpq's rules for handling multiple "dbname" parameters.
While here, let's get rid of the essentially duplicate _connectDB
function, as well as some obsolete nearby cruft.
Per bug #16604 from Zsolt Ero. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
Harmonize behavior by moving reponsibility for fsyncing directories down
into slru.c. In 10 and later, only the multixact directories were
missed (see commit 1b02be21), and in older branches all SLRUs were
missed.
Back-patch to all supported releases.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLtsTUOScnNoSMZ-2ZLv%2BwGh01J6kAo_DM8mTRq1sKdSQ%40mail.gmail.com
tsearch_readline() saves the string pointer it returns to the caller
for possible use in the associated error context callback. However,
the caller will usually pfree that string sometime before it next
calls tsearch_readline(), so that there is a window where an ereport
will try to print an already-freed string.
The built-in users of tsearch_readline() happen to all do that pfree
at the bottoms of their loops, so that the window is effectively
empty for them. However, this is not documented as a requirement,
and contrib/dict_xsyn doesn't do it like that, so it seems likely
that third-party dictionaries might have live bugs here.
The practical consequences of this seem pretty limited in any case,
since production builds wouldn't clobber the freed string immediately,
besides which you'd not expect syntax errors in dictionary files
being used in production. Still, it's clearly a bug waiting to bite
somebody.
Fix by pstrdup'ing the string to be saved for the error callback,
and then pfree'ing it next time through. It's been like this for
a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se