memory contexts. Currently, only leaks in expressions executed as
quals or projections are handled. Clean up some old dead cruft in
executor while at it --- unused fields in state nodes, that sort of thing.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
discussion of 5/19/00). pg_index is now searched for indexes of a
relation using an indexscan. Moreover, this is done once and cached
in the relcache entry for the relation, in the form of a list of OIDs
for the indexes. This list is used by the parser and executor to drive
lookups in the pg_index syscache when they want to know the properties
of the indexes. Net result: index information will be fully cached
for repetitive operations such as inserts.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
WHERE in a place where it can be part of a nestloop inner indexqual.
As the code stood, it put the same physical sub-Plan node into both
indxqual and indxqualorig of the IndexScan plan node. That confused
later processing in the optimizer (which expected that tracing the
subPlan list would visit each subplan node exactly once), and would
probably have blown up in the executor if the planner hadn't choked first.
Fix by making the 'fixed' indexqual be a complete deep copy of the
original indexqual, rather than trying to share nodes below the topmost
operator node. This had further ramifications though, because we were
making the aforesaid list of sub-Plan nodes during SS_process_sublinks
which is run before construction of the 'fixed' indexqual, meaning that
the copy of the sub-Plan didn't show up in that list. Fix by rearranging
logic so that the sub-Plan list is built by the final set_plan_references
pass, not in SS_process_sublinks. This may sound like a mess, but it's
actually a good deal cleaner now than it was before, because we are no
longer dependent on the assumption that planning will never make a copy
of a sub-Plan node.
costs using the inner path's parent->rows count as the number of tuples
processed per inner scan iteration. This is wrong when we are using an
inner indexscan with indexquals based on join clauses, because the rows
count in a Relation node reflects the selectivity of the restriction
clauses for that rel only. Upshot was that if join clause was very
selective, we'd drastically overestimate the true cost of the join.
Fix is to calculate correct output-rows estimate for an inner indexscan
when the IndexPath node is created and save it in the path node.
Change of path node doesn't require initdb, since path nodes don't
appear in saved rules.
to simplify constant expressions and expand SubLink nodes into SubPlans
is done in a separate routine subquery_planner() that calls union_planner().
We formerly did most of this work in query_planner(), but that's the
wrong place because it may never see the real targetlist. Splitting
union_planner into two routines also allows us to avoid redundant work
when union_planner is invoked recursively for UNION and inheritance
cases. Upshot is that it is now possible to do something like
select float8(count(*)) / (select count(*) from int4_tbl) from int4_tbl
group by f1;
which has never worked before.
that the inputs to a given operator can be recursively simplified to
constants, it was evaluating the operator using the op's *original*
(unsimplified) arg list, so that any subexpressions had to be evaluated
again. A constant subexpression at depth N got evaluated N times.
Probably not very important in practical situations, but it made us look
real slow in MySQL's 'crashme' test...
represent the result of a binary-compatible type coercion. At runtime
it just evaluates its argument --- but during type resolution, exprType
will pick up the output type of the RelabelType node instead of the type
of the argument. This solves some longstanding problems with dropped
type coercions, an example being 'select now()::abstime::int4' which
used to produce date-formatted output, not an integer, because the
coercion to int4 was dropped on the floor.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
nonoverlap_sets() and is_subset() to list.c, where they should have lived
to begin with, and rename to nonoverlap_setsi and is_subseti since they
only work on integer lists.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
returns a list of RelOptInfos, eliminating the need for static state
in index_info. That static state was a direct cause of coredumps; if
anything decided to elog(ERROR) partway through an index_info search of
pg_index, the next query would try to close a scan pointer that was
pointing at no-longer-valid memory. Another example of the reasons to
avoid static state variables...
mentioned in FROM but not elsewhere in the query: such tables should be
joined over anyway. Aside from being more standards-compliant, this allows
removal of some very ugly hacks for COUNT(*) processing. Also, allow
HAVING clause without aggregate functions, since SQL does. Clean up
CREATE RULE statement-list syntax the same way Bruce just fixed the
main stmtmulti production.
CAUTION: addition of a field to RangeTblEntry nodes breaks stored rules;
you will have to initdb if you have any rules.
in the Expr nodes they produce. This fixes a few cases of errors like
'typeidTypeRelid: Invalid type - oid = 0' caused by calling parser-related
routines on expression trees that have already been processed by planner-
related routines.
Frankpitt, plus some improvements from yours truly. The simplifier depends
on the proiscachable field of pg_proc to tell it whether a function is
safe to pre-evaluate --- things like nextval() are not, for example.
Update pg_proc.h to contain reasonable cacheability information; as of
6.5.* hardly any functions were marked cacheable. I may have erred too
far in the other direction; see recent mail to pghackers for more info.
This update does not force an initdb, exactly, but you won't see much
benefit from the simplifier until you do one.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
was rejecting negative attnums as bogus, which of course they are not.
Add code to get_attdisbursion to produce a useful value for OID attribute,
since VACUUM does not store stats for system attributes.
Also, repair bug that's been in eqjoinsel for a long time: it was taking
the max of the two columns' disbursions, whereas it should use the min.
Most parts of the planner should ignore, or indeed never even see, uplevel
Vars because they will be or have been replaced by Params. There were a
couple of places that got it wrong though, probably my fault from recent
changes...
documented intepretation of the lefthand and oper fields. Fix a number of
obscure problems while at it --- for example, the old code failed if the parser
decided to insert a type-coercion function just below the operator of a
SubLink.
CAUTION: this will break stored rules that contain subplans. You may
need to initdb.