we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
--- ie, they're only called for side-effects. Add a PG_RETURN_VOID()
macro and use it where appropriate. This probably doesn't change the
machine code by a single bit ... it's just for documentation.
> situation is already tracked in File routines, but a little bit
> incorrectly.
> After small survey in Linux kernel code, I am not sure about
> it. New patch set pos to unknown in the case of read/write
> fails. And do lseek again.
> Here is the full patch for this. This patch reduce amount of
> lseek call ten ti mes for update statement and twenty times for
> select statement. I tested joined up date and count(*) select
> for table with rows > 170000 and 10 indices. I think this is
> worse of trying. Before lseek calls account for more than 5% o
> f time. Now they are 0.89 and 0.15 respectevly.
>
> Due to only one file modification patch should be applied in
> src/backedn/stora ge/file/ dir.
-- Sincerely Yours,
Denis Perchine
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
Interfaced a lot of the custom tests to the config.cache, in the process
made them separate macros and grouped them out into files. Made naming
adjustments.
Removed a couple of useless/unused configure tests.
Disabled C++ by default. C++ is no more special than Perl, Python, and Tcl.
And it breaks equally often. :(
more restriction for fretful users. The current PG allow define only
NO-CREATE-DB and NO-CREATE-USER restriction, but for some users I need
NO-CREATE-TABLE and NO-LOCK-TABLE.
This patch add to current code NOCREATETABLE and NOLOCKTABLE feature:
CREATE USER username
[ WITH
[ SYSID uid ]
[ PASSWORD 'password' ] ]
[ CREATEDB | NOCREATEDB ] [ CREATEUSER | NOCREATEUSER ]
-> [ CREATETABLE | NOCREATETABLE ] [ LOCKTABLE | NOLOCKTABLE ]
...etc.
If CREATETABLE or LOCKTABLE is not specific in CREATE USER command,
as default is set CREATETABLE or LOCKTABLE (true).
A user with NOCREATETABLE restriction can't call CREATE TABLE or
SELECT INTO commands, only create temp table is allow for him.
Karel
to_char. I don't know about the rest of the world, but the "standard" in
Australia is the following:
1st, 2nd, 3rd, 4th - 9th
10th - 19th
21st, 22nd, 23rd, 24th - 29th (similarly for 30s - 90s)
110th - 119th (and for all "teens")
121st, 122nd, 123rd, 124th - 129th
I think you see the trend. The current code works fine except that it
produces:
111st, 112nd, 113rd, 114th - 119th
211st, 212nd, 213rd, 214th - 219th ... and so on.
Without knowing anything about what's supported (and what isn't) in the usual
I18N libraries, should this type of behaviour be defined within the locales?
Daniel Baldoni
CPP) to create platform independent files. Unfortunately, that means that
every config.status (or configure) run invariably causes a relink of the
postmaster and also that we can't put these files in the distribution
(usefully). So we make it a little smarter: when the output files already
exist and it notices that it would recreate them in identical form, it
doesn't touch them. In order to avoid re-running the make rule all the time
we update a timestamp file instead.
Update release_prep accordingly. Also make Gen_fmgrtab.sh use the awk that
is detected at configure time, not necessarily named `awk' and have it check
for exit statuses a little better.
In other news... Remove USE_LOCALE from the templates, it was set to `no'
everywhere anyway. Also remove YACC and YFLAGS from the templates, configure
is smart enough to find bison or yacc itself. Use AC_PROG_YACC for that
instead of the hand-crafted code. Do not set YFLAGS to `-d'. The make rules
that need this flag should explicitly invoke it. YFLAGS should be a user
variable. Update the makefiles to that effect.
over multiple lookups --- it should use SearchSysCacheTupleCopy instead.
This accounts for rare failures like 'init_fcache: null probin for procedure 481'
when running concurrently with a VACUUM.
direct pointer into the syscache entry for the type. In some cases
the syscache entry might get flushed before we are done using the
returned type name. This bug accounts for difficult-to-repeat
failures seen when INSERTs into columns of certain data types are
run in parallel with VACUUMs of system tables. There may be related
problems elsewhere --- we need to take a harder look at uses of
syscache data.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
no reason for them to be copied into src/backend rather than being
installed straight from the catalog subdirectory. This also avoids
some peculiar behavior (bugs?) present in at least gmake 3.78.1: it
won't always update the bki files in backend/ even when the ones in
backend/catalog/ are newer.
that name and issue a NOTICE to the effect that we did. Previously,
code would try to assign the new cursor declaration to the old portal,
but this didn't work reliably since new parsetree is still sitting in
blank portal and is likely to get clobbered.
actually use their targetlist, are given a targetlist that is just a
pointer to the first appended plan's targetlist. This is OK, but what
is not OK is that any sub-select expressions in said tlist were being
entered in the subPlan lists of both the Append and the first appended
plan. That led to two startup and two shutdown calls for the same
plan node at exec time, which led to crashes. Fix is to not generate
a list of subPlans for an Append node. Same problem and fix apply
to other node types that don't have a real, functioning targetlist:
Material, Sort, Unique, Hash.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
(ie, parameters instead of consts) will be treated as a range query.
We do not know the actual selectivities involved, but it seems like
a good idea to use a smaller estimate than we would use for two unrelated
inequalities.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
built-in procedures are named after the prosrc field of pg_proc (ie,
the actual C function name), not the proname field. This did not use
to make a difference back when the two were always the same, but in the
presence of overloaded proname values we'd best try to use the C name
instead. AFAICT this change affects no existing code, but it is
necessary to be able to get at some built-in functions that no macro
was being generated for before.
to 10, and be consistent about whether it counts the trailing null (it
does not). Also increase MAXDATELEN to be sure no buffer overflows are
caused by the longer MAXTZLEN.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
Most (nearly all) of the work was done by David Wragg <dpw@doc.ic.ac.uk>
He patched 6.5.3. I've updated it for 7.0RC5.
It works for MIT kerberos 1.1.1 (and previously for 1.0.6 as well).
I've got the patch against 6.5.3, plus kerberized RPMS.
Mike Wyer <mw@doc.ic.ac.uk> || "Woof?"
other than the most common value in a column. We had had 0.5, make it
0.1 to make it more likely that an indexscan will be chosen. Really
need better statistics instead, but this should stem the bleeding
meanwhile ...
subsequent I/O attempts fail cleanly. I'm speculating about failure
scenarios in which we do pq_close, then something in a proc_exit routine
opens a file (re-using that kernel FD number), then something else
fails and tries to write an elog message to the frontend ... message
ends up in opened file, oops. No known examples of this but it seems
like a potential hole.
the oper field should be a valid Node structure so it can be dumped by
outfuncs.c without risk of coredump. (We had been using a raw pointer
to character string, which surely is NOT a valid Node.) This doesn't
cause any backwards compatibility problems for stored rules, since
raw unanalyzed parsetrees are never stored.
*last*, after all updating of system catalogs. In old code, an error
detected during TypeRename left the relation hosed. Also, add a call
to flush the relation's relcache entry, rather than trusting to shared
cache invalidation to flush it for us.
think that both sides of indexqual look like index keys. An example is
create table inside (f1 float8 primary key);
create table outside (g1 float8, g2 float8);
select * from inside,outside where f1 = atan2(g1+1, g2);
ERROR: ExecInitIndexScan: both left and right ops are rel-vars
(note that failure is potentially platform-dependent). Solution is a
cleanup I had had in mind to make anyway: functional index keys should
be represented as Var nodes in the fixed indexqual, just like regular
index keys.
project I am working on (Recall - a distributed, fault-tolerant,
replicated, storage framework @ http://www.fault-tolerant.org).
Recall is written in C++. I need to include the postgres headers and
there are some problems when including the headers w/C++.
Attached is a patch generated from postgres/src that fixes my problems.
I was hoping to get this into the main source. It's very small (2k) and
3 files are changed: backend/utils/fmgr/fmgr.c,
backend/utils/Gen_fmgrtab.sh.in, and include/access/tupdesc.h.
In C++, you get a multiply defined symbol because the variable
(FmgrInfo *fmgr_pl_finfo) is defined in the header (the patch moves it
to the .c file). The other problem in tupdesc.h is the use of typeid
is a problem in c++ (I renamed it to oidtypeid).
Thanks,
Neal Norwitz
some platforms --- and I also see that it is documented as not thread-
safe on HPUX and possibly other platforms. No good reason not to just
use IPPROTO_TCP constant from <netinet/in.h> instead.
really ought to fix relcache entry construction so that it does not
do so much with CurrentMemoryContext = CacheCxt. As is, relatively
harmless leaks in either sequential or index scanning translate to
permanent leaks if they occur when called from relcache build.
For the moment, however, the path of least resistance is to repair
all such leaks...
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
RowExclusive (my fault). Also, install a check to prevent people
from trying COPY BINARY to stdout/from stdin. No way that will
work unless we redesign the frontend COPY protocol ... which is
not worth the trouble in the near future ...
IRIX systems using the native compilers. A summary is:
- Various files use "//" as a comment delimiter in c files.
- Problems caused by assuming "char" is signed.
cash.in: building -signed the rules regression test fails as described
in FAQ_QNX4. If CHAR_MAX is "255U" then ((signed char)CHAR_MAX) is -1.
postmaster.c: random number regression test failed without this change.
- Some generic build issues and warning message cleanup.
David Kaelbling
just use the portable form,
tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
There were a bunch of places that weren't paying attention to configure's
result anyway (including configure itself!?); clean them up too.
days. It seems to be a FAQ, and I think I know why. When creating a 'c'
language function, CREATE FUNCTION is fed the shared object filename,
and seems to succeed. Only when trying to use the function is an error
thrown, by which time the coder thinks something's wrong with executing
the code, not with loading it.
I think I once saw it proposed to load shared objects at function creation
time, but that idea was shot down on the grounds of resident memory bloat,
ISTR. Here's a patch for a compromise: all it does is stat() the file,
just like the loader code does, so that the errors caused by non existent
files, and no directory 'x' permissions (the most common ones, it seems),
get caught while the developer is still thinking about code loading. It
doesn't catch all errors (like the code not being readable by the postgres
user) but seems to catch the most common, without actually opening the file.
What do you think?
Ross
indexes, apparently, nor on functional indexes with more than one input
column (force of natts = 1 was in the wrong branch of IF statement).
Coredumped if source relation contained any uncommitted tuples, due to
failure to test for success return from heap_fetch. Fetched tuple
was passed directly to heap_insert, which clobbers the TID and commit
status in the tuple header it's given, which meant that the source
relation's tuples all got trashed as the copy proceeded. Abort partway
through, and you're left with a lot of missing tuples.
I wonder what else is lurking here ...
pg_char_to_encoding() in multibyte disbaled case so that it does not
throw an error, rather return HARD CODED default value (currently SQL_ASCII).
This would solve the "non-mb backend vs. mb-enabled frontend" problem.
cleanup, ie, as soon as we have caught the longjmp. This ensures that
current context will be a valid context throughout error cleanup. Before
it was possible that current context was pointing at a context that would
get deleted during cleanup, leaving any subsequent pallocs in deep
trouble. I was able to provoke an Assert failure when compiled with
asserts + -DCLOBBER_FREED_MEMORY, if I did something that would cause
an error to be reported by the backend large-object code, because indeed
that code operates in a context that gets deleted partway through xact
abort --- and CurrentMemoryContext was still pointing at it! Boo hiss.
cases where joinclauses were present but some joins have to be made
by cartesian-product join anyway. An example is
SELECT * FROM a,b,c WHERE (a.f1 + b.f2 + c.f3) = 0;
Even though all the rels have joinclauses, we must join two of them
in cartesian style before we can use the join clause...
than BIND_DEFERRED. That way, if the loaded library has unresolved
references, shl_load fails cleanly. As we had it, shl_load would
succeed and then the dynlinker would call abort() when we try to call
into the loaded library. abort()ing a backend is uncool.
to give wrong results: it should be looking at inJoinSet not inFromCl.
Also, make 'modified' flag be local to ApplyRetrieveRule: we should
append a rule's quals to the query iff that particular rule applies,
not if we have fired any previously-considered rule for the query!
(SELECT FROM table*). Cause was reference to 'eref' field of an RTE,
which is null in an RTE loaded from a stored rule parsetree. There
wasn't any good reason to be touching the refname anyway...
table for an average of NTUP_PER_BUCKET tuples/bucket, but cost_hashjoin
was assuming a target load of one tuple/bucket. This was causing a
noticeable underestimate of hashjoin costs.
(LIKE and regexp matches). These are not yet referenced in pg_operator,
so by default the system will continue to use eqsel/neqsel.
Also, tweak convert_to_scalar() logic so that common prefixes of strings
are stripped off, allowing better accuracy when all strings in a table
share a common prefix.
subsequent elogs() in the same COPY operation to display the wrong
line number. Fix is to clear lineno only when elog level is such
that we will not return to caller.
all platforms, not just SCO. The operation is undefined for Unix-domain
sockets anyway. It seems SCO is not the only platform that complains
instead of treating the call as a no-op.
contained a sub-SELECT nested within an AND/OR tree that cnfify()
thought it should rearrange. Same physical sub-SELECT node could
end up linked into multiple places in resulting expression tree.
This is harmless for most node types, but not for SubLink.
Repair bug by making physical copies of subexpressions that get
logically duplicated by cnfify(). Also, tweak the heuristic that
decides whether it's a good idea to do cnfify() --- we don't really
want that to happen when it would cause multiple copies of a subselect
to be generated, I think.
whether to do fsync or not, and if so (which should be seldom) just
do the fsync immediately. This way we need not build data structures
in md.c/fd.c for blind writes.
logged queries to 1024, truncating longer queries. That is about half of
the size I need (I have a union that is 2K long). Can someone consider
bumping it to 4K or so? Patch attached...
Regards,
Ed Loehr
Bruce Momjian
Peter Eisentraut
Tom Lane
Vadim B. Mikheev
Hiroshi Inoue
Tatsuo Ishii
Thomas G. Lockhart
Jan Wieck