we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
--- ie, they're only called for side-effects. Add a PG_RETURN_VOID()
macro and use it where appropriate. This probably doesn't change the
machine code by a single bit ... it's just for documentation.
> situation is already tracked in File routines, but a little bit
> incorrectly.
> After small survey in Linux kernel code, I am not sure about
> it. New patch set pos to unknown in the case of read/write
> fails. And do lseek again.
> Here is the full patch for this. This patch reduce amount of
> lseek call ten ti mes for update statement and twenty times for
> select statement. I tested joined up date and count(*) select
> for table with rows > 170000 and 10 indices. I think this is
> worse of trying. Before lseek calls account for more than 5% o
> f time. Now they are 0.89 and 0.15 respectevly.
>
> Due to only one file modification patch should be applied in
> src/backedn/stora ge/file/ dir.
-- Sincerely Yours,
Denis Perchine
have'nt r un autoconf to create a new configure, I guess that's done by
the smapshot process, I had to remove a line from interface/odbc/
GNUMakefile to get it to build, it was a autoconf variable that looks to
not be used anymore, I am assuming that this is ok.
Nick Gorham
Easysoft Ltd
>> Makefile where the make bombs if "." is not in the builder's path?
>> The last I checked, it wasn't applied and the fix is very easy
>> (explicitly use "./" to call the script).
SL Baur
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
Interfaced a lot of the custom tests to the config.cache, in the process
made them separate macros and grouped them out into files. Made naming
adjustments.
Removed a couple of useless/unused configure tests.
Disabled C++ by default. C++ is no more special than Perl, Python, and Tcl.
And it breaks equally often. :(
that now functions as a wrapper around the MakeMaker stuff. It might
even behave sensically when we have separate build dirs. Same for plperl,
which of course still doesn't work very well. Made sure that plperl
respects the choice of --libdir.
Added --with-python to automatically build and install the Python interface.
Works similarly to the Perl5 stuff.
Moved the burden of the distclean targets lower down into the source tree.
Eventually, each make file should have its own.
Added automatic remaking of makefiles and configure. Currently only for the
top-level because of a bug(?) in Autoconf. Use GNU `missing' to work around
missing autoconf and aclocal. Start factoring out macros into their own
config/*.m4 files to increase readability and organization.
absolute. It also makes it more compliant with the interface
specification in Sun's documentation;
1. absolute(0) should throw an exception.
2. absolute(>num-records) should set the current row to after the last
record in addition to returning false.
3. absolute(<num-records) should set the current row to before the first
record in addition to returning false.
These operations in the existing code just return false and don't change
current_row.
These changes required a minor change to relative(int) since it calls
absolute(int)
The attached patch is against the cvs repository tree as of this morning.
Also, who is in charge of maintaining the jdbc driver? I'm working on
getArray for the jdbc2 driver, but it's going to require three more
classes to be added to the driver, and thus three more source files
in the repository. Is there someone I can contact directly to ask about
this?
Travis Bauer | CS Grad Student | IU |www.cs.indiana.edu/~trbauer
postgres build and use unixODBC (http://www.unixodbc.org)
This patch was applied against the postgresql-7.0beta1 build
Any problems let me know.
Nick Gorham
more restriction for fretful users. The current PG allow define only
NO-CREATE-DB and NO-CREATE-USER restriction, but for some users I need
NO-CREATE-TABLE and NO-LOCK-TABLE.
This patch add to current code NOCREATETABLE and NOLOCKTABLE feature:
CREATE USER username
[ WITH
[ SYSID uid ]
[ PASSWORD 'password' ] ]
[ CREATEDB | NOCREATEDB ] [ CREATEUSER | NOCREATEUSER ]
-> [ CREATETABLE | NOCREATETABLE ] [ LOCKTABLE | NOLOCKTABLE ]
...etc.
If CREATETABLE or LOCKTABLE is not specific in CREATE USER command,
as default is set CREATETABLE or LOCKTABLE (true).
A user with NOCREATETABLE restriction can't call CREATE TABLE or
SELECT INTO commands, only create temp table is allow for him.
Karel
to_char. I don't know about the rest of the world, but the "standard" in
Australia is the following:
1st, 2nd, 3rd, 4th - 9th
10th - 19th
21st, 22nd, 23rd, 24th - 29th (similarly for 30s - 90s)
110th - 119th (and for all "teens")
121st, 122nd, 123rd, 124th - 129th
I think you see the trend. The current code works fine except that it
produces:
111st, 112nd, 113rd, 114th - 119th
211st, 212nd, 213rd, 214th - 219th ... and so on.
Without knowing anything about what's supported (and what isn't) in the usual
I18N libraries, should this type of behaviour be defined within the locales?
Daniel Baldoni
It addresses three issues:
1. The problem with ResultSet's interface specifying 1-based indexing was
not quite fixed in 7.0.2. absolute would stop the user form moving to the
first record (record 0 internally).
2. Absolute did not set current_row
3. For field.mod=-1, GetObject would try to return numeric values with a
precision of around 65000. Now GetObject detects when field.mod==-1, and
passes that as the scale to getBigDecimal. getBigDecimal detects when a
-1 is passed and simply does not scale the value returned. You still get
the correct value back, it simply does not tweak the precision.
I'm working off of a source tree I just checked out from the
repository. The diff is based on what was in the repository about ten
minutes ago.
----------------------------------------------------------------
Travis Bauer | CS Grad Student | IU |www.cs.indiana.edu/~trbauer
----------------------------------------------------------------
CPP) to create platform independent files. Unfortunately, that means that
every config.status (or configure) run invariably causes a relink of the
postmaster and also that we can't put these files in the distribution
(usefully). So we make it a little smarter: when the output files already
exist and it notices that it would recreate them in identical form, it
doesn't touch them. In order to avoid re-running the make rule all the time
we update a timestamp file instead.
Update release_prep accordingly. Also make Gen_fmgrtab.sh use the awk that
is detected at configure time, not necessarily named `awk' and have it check
for exit statuses a little better.
In other news... Remove USE_LOCALE from the templates, it was set to `no'
everywhere anyway. Also remove YACC and YFLAGS from the templates, configure
is smart enough to find bison or yacc itself. Use AC_PROG_YACC for that
instead of the hand-crafted code. Do not set YFLAGS to `-d'. The make rules
that need this flag should explicitly invoke it. YFLAGS should be a user
variable. Update the makefiles to that effect.
over multiple lookups --- it should use SearchSysCacheTupleCopy instead.
This accounts for rare failures like 'init_fcache: null probin for procedure 481'
when running concurrently with a VACUUM.
direct pointer into the syscache entry for the type. In some cases
the syscache entry might get flushed before we are done using the
returned type name. This bug accounts for difficult-to-repeat
failures seen when INSERTs into columns of certain data types are
run in parallel with VACUUMs of system tables. There may be related
problems elsewhere --- we need to take a harder look at uses of
syscache data.
Fixed Statement, so that the update count is valid when an SQL DELETE operation is done.
While fixing the update count, made it easier to get the OID of the last insert as well. Example is in example/basic.java
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
no reason for them to be copied into src/backend rather than being
installed straight from the catalog subdirectory. This also avoids
some peculiar behavior (bugs?) present in at least gmake 3.78.1: it
won't always update the bki files in backend/ even when the ones in
backend/catalog/ are newer.
that name and issue a NOTICE to the effect that we did. Previously,
code would try to assign the new cursor declaration to the old portal,
but this didn't work reliably since new parsetree is still sitting in
blank portal and is likely to get clobbered.
actually use their targetlist, are given a targetlist that is just a
pointer to the first appended plan's targetlist. This is OK, but what
is not OK is that any sub-select expressions in said tlist were being
entered in the subPlan lists of both the Append and the first appended
plan. That led to two startup and two shutdown calls for the same
plan node at exec time, which led to crashes. Fix is to not generate
a list of subPlans for an Append node. Same problem and fix apply
to other node types that don't have a real, functioning targetlist:
Material, Sort, Unique, Hash.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
(ie, parameters instead of consts) will be treated as a range query.
We do not know the actual selectivities involved, but it seems like
a good idea to use a smaller estimate than we would use for two unrelated
inequalities.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
built-in procedures are named after the prosrc field of pg_proc (ie,
the actual C function name), not the proname field. This did not use
to make a difference back when the two were always the same, but in the
presence of overloaded proname values we'd best try to use the C name
instead. AFAICT this change affects no existing code, but it is
necessary to be able to get at some built-in functions that no macro
was being generated for before.
to 10, and be consistent about whether it counts the trailing null (it
does not). Also increase MAXDATELEN to be sure no buffer overflows are
caused by the longer MAXTZLEN.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
Most (nearly all) of the work was done by David Wragg <dpw@doc.ic.ac.uk>
He patched 6.5.3. I've updated it for 7.0RC5.
It works for MIT kerberos 1.1.1 (and previously for 1.0.6 as well).
I've got the patch against 6.5.3, plus kerberized RPMS.
Mike Wyer <mw@doc.ic.ac.uk> || "Woof?"
other than the most common value in a column. We had had 0.5, make it
0.1 to make it more likely that an indexscan will be chosen. Really
need better statistics instead, but this should stem the bleeding
meanwhile ...
subsequent I/O attempts fail cleanly. I'm speculating about failure
scenarios in which we do pq_close, then something in a proc_exit routine
opens a file (re-using that kernel FD number), then something else
fails and tries to write an elog message to the frontend ... message
ends up in opened file, oops. No known examples of this but it seems
like a potential hole.
the oper field should be a valid Node structure so it can be dumped by
outfuncs.c without risk of coredump. (We had been using a raw pointer
to character string, which surely is NOT a valid Node.) This doesn't
cause any backwards compatibility problems for stored rules, since
raw unanalyzed parsetrees are never stored.
*last*, after all updating of system catalogs. In old code, an error
detected during TypeRename left the relation hosed. Also, add a call
to flush the relation's relcache entry, rather than trusting to shared
cache invalidation to flush it for us.
think that both sides of indexqual look like index keys. An example is
create table inside (f1 float8 primary key);
create table outside (g1 float8, g2 float8);
select * from inside,outside where f1 = atan2(g1+1, g2);
ERROR: ExecInitIndexScan: both left and right ops are rel-vars
(note that failure is potentially platform-dependent). Solution is a
cleanup I had had in mind to make anyway: functional index keys should
be represented as Var nodes in the fixed indexqual, just like regular
index keys.
it exists) before testing 'using namespace std'. This is necessary
on some C++ setups where the compiler won't take a 'using' until
you've included a header that mentions namespace std. (Pretty braindead
if you ask me, but...)
--with-includes) to makefiles for pltcl and plperl, so that these
switches will be used even though we do not want other top-level
CFLAGS. Ain't it fun trying to support multiple-compiler platforms?
project I am working on (Recall - a distributed, fault-tolerant,
replicated, storage framework @ http://www.fault-tolerant.org).
Recall is written in C++. I need to include the postgres headers and
there are some problems when including the headers w/C++.
Attached is a patch generated from postgres/src that fixes my problems.
I was hoping to get this into the main source. It's very small (2k) and
3 files are changed: backend/utils/fmgr/fmgr.c,
backend/utils/Gen_fmgrtab.sh.in, and include/access/tupdesc.h.
In C++, you get a multiply defined symbol because the variable
(FmgrInfo *fmgr_pl_finfo) is defined in the header (the patch moves it
to the .c file). The other problem in tupdesc.h is the use of typeid
is a problem in c++ (I renamed it to oidtypeid).
Thanks,
Neal Norwitz
some platforms --- and I also see that it is documented as not thread-
safe on HPUX and possibly other platforms. No good reason not to just
use IPPROTO_TCP constant from <netinet/in.h> instead.
really ought to fix relcache entry construction so that it does not
do so much with CurrentMemoryContext = CacheCxt. As is, relatively
harmless leaks in either sequential or index scanning translate to
permanent leaks if they occur when called from relcache build.
For the moment, however, the path of least resistance is to repair
all such leaks...
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
RowExclusive (my fault). Also, install a check to prevent people
from trying COPY BINARY to stdout/from stdin. No way that will
work unless we redesign the frontend COPY protocol ... which is
not worth the trouble in the near future ...
is in <string> and not in <string.h> on QNX4/egcs-2.91.60.
Probably this can be changed for all platforms. The test in line 1705 uses
<string> as well. Because I am not sure, I havn't this included into the
patch.
doc/Makefile has to be sligthly modified as it has been done for
src/backend/Makefile due to a QNX4 problem (patch attached)
Furthermore src/test/regress/run_check.sh needs to be patched as it has been
done for regress.sh (patch attached). Please note that in the patch the
postmaster is started always with the -i option.
run_check.sh reports the test "limit" as failed, but in reallity it is OK.
regress.sh reports it as OK.
Andreas Kardos
IRIX systems using the native compilers. A summary is:
- Various files use "//" as a comment delimiter in c files.
- Problems caused by assuming "char" is signed.
cash.in: building -signed the rules regression test fails as described
in FAQ_QNX4. If CHAR_MAX is "255U" then ((signed char)CHAR_MAX) is -1.
postmaster.c: random number regression test failed without this change.
- Some generic build issues and warning message cleanup.
David Kaelbling
just use the portable form,
tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
There were a bunch of places that weren't paying attention to configure's
result anyway (including configure itself!?); clean them up too.
I'm including a diff of
postgresql-7.0/src/interfaces/jdbc/org/postgresql/jdbc2/ResultSet.java.
I've clearly marked all the fixes I did. Would *someone* who has access
to the cvs please put this in?
Joseph Shraibman
days. It seems to be a FAQ, and I think I know why. When creating a 'c'
language function, CREATE FUNCTION is fed the shared object filename,
and seems to succeed. Only when trying to use the function is an error
thrown, by which time the coder thinks something's wrong with executing
the code, not with loading it.
I think I once saw it proposed to load shared objects at function creation
time, but that idea was shot down on the grounds of resident memory bloat,
ISTR. Here's a patch for a compromise: all it does is stat() the file,
just like the loader code does, so that the errors caused by non existent
files, and no directory 'x' permissions (the most common ones, it seems),
get caught while the developer is still thinking about code loading. It
doesn't catch all errors (like the code not being readable by the postgres
user) but seems to catch the most common, without actually opening the file.
What do you think?
Ross
indexes, apparently, nor on functional indexes with more than one input
column (force of natts = 1 was in the wrong branch of IF statement).
Coredumped if source relation contained any uncommitted tuples, due to
failure to test for success return from heap_fetch. Fetched tuple
was passed directly to heap_insert, which clobbers the TID and commit
status in the tuple header it's given, which meant that the source
relation's tuples all got trashed as the copy proceeded. Abort partway
through, and you're left with a lot of missing tuples.
I wonder what else is lurking here ...
under FreeBSD ... basically, if setproctitle() exists, use it ...
the draw back right now is the PS_SET_STATUS stuff doesn't work, but am looking
into that one right now ... at lesat now you can see who is connecting where
and from where ...
mappings. In fact, it had them backward because it was using the 6.5.*
code. Copied them from parser/gram.y, so it is fixed now. Looks like
our first 7.0.1 fix. Oops, seems Tom has beat me to it as I was typing
this.
Peter Eisentraut
Bruce Momjian
Tom Lane
Peter Mount
Vadim B. Mikheev
Hiroshi Inoue
Tatsuo Ishii
Marc G. Fournier
Michael Meskes