tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.
As mentioned in its commit message, eca0f1db left open a race condition,
where a page could be marked all-visible, after the code checked
PageIsAllVisible() to pin the VM, but before the page is locked. Plug
that hole.
Reviewed-By: Robert Haas, Andres Freund
Author: Amit Kapila
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
Some conditions resulted in "return" directly out of a PG_TRY block,
which left the exception stack dangling, and to add insult to injury
failed to restore the state of set_latch_on_sigusr1.
This is a bug only in 9.5; in HEAD it was accidentally fixed by commit
db0f6cad4, which removed the surrounding PG_TRY block. However, I (tgl)
chose to apply the patch to HEAD as well, because the old coding was
gratuitously different from WaitForBackgroundWorkerStartup(), and there
would indeed have been no bug if it were done like that to start with.
Dmitry Ivanov
Discussion: <1637882.WfYN5gPf1A@abook>
Previously, we tested for MVCC snapshots to see whether they were too
old, but not TOAST snapshots, which can lead to complaints about missing
TOAST chunks if those chunks are subject to early pruning. Ideally,
the threshold lsn and timestamp for a TOAST snapshot would be that of
the corresponding MVCC snapshot, but since we have no way of deciding
which MVCC snapshot was used to fetch the TOAST pointer, use the oldest
active or registered snapshot instead.
Reported by Andres Freund, who also sketched out what the fix should
look like. Patch by me, reviewed by Amit Kapila.
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
We don't want postmaster child processes to contain a copy of the
postmaster's PostmasterContext. That would be a waste of memory at least,
and at worst a security issue, since there are copies of the semi-sensitive
pg_hba and pg_ident data in there. All other child process types delete
the PostmasterContext after forking, but the original coding of the
background worker patch (commit da07a1e85) did not do so. It appears
that the only reason for that was to avoid copying the bgworker's
MyBgworkerEntry out of that context; but the couple of additional
statements needed to do so are hardly good justification for it. Hence,
copy that data and then clear the context as other child processes do.
Because this patch changes the memory context in which a bgworker function
gains control, back-patching it would be a bit risky, so we won't fix this
in back branches. The "security" complaint is pretty thin anyway for
generic bgworkers; only with the introduction of parallel query is there
any question of running untrusted code in a bgworker process.
Discussion: <14111.1470082717@sss.pgh.pa.us>
This is apparently harmless on Windows, but on Unix it results in an
assertion failure. We'd not noticed because this code doesn't get
used on Unix unless you build with -DEXEC_BACKEND. Bug was evidently
introduced by sloppy refactoring in commit 31c453165.
Thomas Munro
Discussion: <CAEepm=1VOnbVx4wsgQFvj94hu9jVt2nVabCr7QiooUSvPJXkgQ@mail.gmail.com>
As noted by Alvaro, there are CHECK_FOR_INTERRUPTS() calls in the shm_mq.c
functions called by HandleParallelMessages(). I believe they're all
unreachable since we always pass nowait = true, but it doesn't seem like
a great idea to assume that no such call will ever be reachable from
HandleParallelMessages(). If that did happen, there would be a risk of a
recursive call to HandleParallelMessages(), which it does not appear to be
designed for --- for example, there's nothing that would prevent
out-of-order processing of received messages. And certainly such cases
cannot easily be tested. So let's prevent it by holding off interrupts for
the duration of the function. Back-patch to 9.5 which contains identical
code.
Discussion: <14869.1470083848@sss.pgh.pa.us>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
When doing record typmod remapping, tqueue.c did fresh catalog lookups
for each tuple it processed, which was pretty horrible performance-wise
(it seemed to about halve the already none-too-quick speed of bulk reads
in parallel mode). Worse, it insisted on putting bits of that data into
TopMemoryContext, from where it never freed them, causing a
session-lifespan memory leak. (I suppose this was coded with the idea
that the sender process would quit after finishing the query ---
but the receiver uses the same code.)
Restructure to avoid repetitive catalog lookups and to keep that data
in a query-lifespan context, in or below the context where the
TQueueDestReceiver or TupleQueueReader itself lives.
Fix some other bugs such as continuing to use a tupledesc after
releasing our refcount on it. Clean up cavalier datatype choices
(typmods are int32, please, not int, and certainly not Oid). Improve
comments and error message wording.
TupleQueueReaderNext() leaks like a sieve if it has to do any tuple
disassembly/reconstruction. While we could try to clean up its allocations
piecemeal, it seems like a better idea just to insist that it should be run
in a short-lived memory context, so that any transient space goes away
automatically. I chose to have nodeGather.c switch into its existing
per-tuple context before the call, rather than inventing a separate
context inside tqueue.c.
This is sufficient to stop all leakage in the simple case I exhibited
earlier today (see link below), but it does not deal with leaks induced
in more complex cases by tqueue.c's insistence on using TopMemoryContext
for data that it's not actually trying hard to keep track of. That issue
is intertwined with another major source of inefficiency, namely failure
to cache lookup results across calls, so it seems best to deal with it
separately.
In passing, improve some comments, and modify gather_readnext's method for
deciding when it's visited all the readers so that it's more obviously
correct. (I'm not actually convinced that the previous code *is*
correct in the case of a reader deletion; it certainly seems fragile.)
Discussion: <32763.1469821037@sss.pgh.pa.us>
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
The docs failed to explain that LIKE INCLUDING INDEXES would not preserve
the names of indexes and associated constraints. Also, it wasn't mentioned
that EXCLUDE constraints would be copied by this option. The latter
oversight seems enough of a documentation bug to justify back-patching.
In passing, do some minor copy-editing in the same area, and add an entry
for LIKE under "Compatibility", since it's not exactly a faithful
implementation of the standard's feature.
Discussion: <20160728151154.AABE64016B@smtp.hushmail.com>
The keys are integers, not strings. The code accidentally worked on
little-endian machines, at least up to 256 distinct record types within
a session, but failed utterly on big-endian. This was unexpectedly
exposed by a test case added by commit 4452000f3, which apparently is the
only parallelizable query in the regression suite that uses more than one
anonymous record type. Fortunately, buildfarm member mandrill is
big-endian and is running with force_parallel_mode on, so it failed.
cost_rescan assumed that we don't need to rebuild the hash table when
rescanning a hash join. However, that's currently only true for
single-batch joins; for a multi-batch join we must charge full freight.
This probably has escaped notice because we'd be unlikely to put a hash
join on the inside of a nestloop anyway. Nonetheless, it's wrong.
Fix in HEAD, but don't backpatch for fear of destabilizing plans in
stable releases.
ExecMakeTableFunctionResult(), which is used in SELECT FROM function(...)
cases, formerly treated a simple NULL output from a function that both
returnsSet and returnsTuple as a violation of the SRF protocol. What seems
better is to treat a NULL output as equivalent to ROW(NULL,NULL,...).
Without this, cases such as SELECT FROM unnest(...) on an array of
composite are vulnerable to unexpected and not-very-helpful failures.
Old code comments here suggested an alternative of just ignoring
simple-NULL outputs, but that doesn't seem very principled.
This change had been hung up for a long time due to uncertainty about
how much we wanted to buy into the equivalence of simple NULL and
ROW(NULL,NULL,...). I think that's been mostly resolved by the discussion
around bug #14235, so let's go ahead and do it.
Per bug #7808 from Joe Van Dyk. Although this is a pretty old report,
fixing it smells a bit more like a new feature than a bug fix, and the
lack of other similar complaints suggests that we shouldn't take much risk
of destabilization by back-patching. (Maybe that could be revisited once
this patch has withstood some field usage.)
Andrew Gierth and Tom Lane
Report: <E1TurJE-0006Es-TK@wrigleys.postgresql.org>
Previously, some functions returned various fixed strings and others
failed with a cache lookup error. Per discussion, standardize on
returning NULL. Although user-exposed "cache lookup failed" error
messages might normally qualify for bug-fix treatment, no back-patch;
the risk of breaking user code which is accustomed to the current
behavior seems too high.
Michael Paquier
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
The aggfilter expression should be removed from the parent (combining)
Aggref, since it's not supposed to apply the filter, and indeed cannot
because any Vars used in the filter would not be available after the
lower-level aggregation step. Per report from Jeff Janes.
(This has been broken since the introduction of partial aggregation,
I think. The error became obvious after commit 59a3795c2, when setrefs.c
began processing the parent Aggref's fields normally and thus would detect
such Vars. The special-case coding previously used in setrefs.c skipped
over the parent's aggfilter field without processing it. That was broken
in its own way because no other setrefs.c processing got applied either;
though since the executor would not execute the filter expression, only
initialize it, that oversight might not have had any visible symptoms at
present.)
Report: <CAMkU=1xfuPf2edAe4ZGXTmJpU7jxuKukKyvNtEXwu35B7dvejg@mail.gmail.com>
These functions were added in commits fbe5a3fb7 and a104a017f,
but commit 45639a052 removed their only callers. Put the related
code in foreign.c back to the way it was in 9.5, to avoid pointless
cross-version diffs.
Etsuro Fujita
Patch: <d674a3f1-6b63-519c-ef3f-f3188ed6a178@lab.ntt.co.jp>
runtime.sgml used to contain a table of estimated shared memory consumption
rates for max_connections and some other GUCs. Commit 390bfc643 removed
that on the well-founded grounds that (a) we weren't maintaining the
entries well and (b) it no longer mattered so much once we got out from
under SysV shmem limits. But it missed that there were even-more-obsolete
versions of some of those numbers in comments in postgresql.conf.sample.
Remove those too. Back-patch to 9.3 where the aforesaid commit went in.
Since a892234 & fd31cd265 the visibilitymap's freeze bit is used to
avoid vacuuming the whole relation in anti-wraparound vacuums. Doing so
correctly relies on not adding xids to the heap without also unsetting
the visibilitymap flag. Tuple locking related code has not done so.
To allow selectively resetting all-frozen - to avoid pessimizing
heap_lock_tuple - allow to selectively reset the all-frozen with
visibilitymap_clear(). To avoid having to use
visibilitymap_get_status (e.g. via VM_ALL_FROZEN) inside a critical
section, have visibilitymap_clear() return whether any bits have been
reset.
There's a remaining issue (denoted by XXX): After the PageIsAllVisible()
check in heap_lock_tuple() and heap_lock_updated_tuple_rec() the page
status could theoretically change. Practically that currently seems
impossible, because updaters will hold a page level pin already. Due to
the next beta coming up, it seems better to get the required WAL magic
bump done before resolving this issue.
The added flags field fields to xl_heap_lock and xl_heap_lock_updated
require bumping the WAL magic. Since there's already been a catversion
bump since the last beta, that's not an issue.
Reviewed-By: Robert Haas, Amit Kapila and Andres Freund
Author: Masahiko Sawada, heavily revised by Andres Freund
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
We've broken this code path at least twice in the past, so it's prudent
to have a test case that covers it. To allow exercising the code path
without creating a very large (and slow to run) test case, redefine the
sort threshold to be bounded by maintenance_work_mem as well as the number
of available buffers. While at it, fix an ancient oversight that when
building a temp index, the number of available buffers is not NBuffers but
NLocBuffer. Also, if assertions are enabled, apply a direct test that the
sort actually does return the tuples in the expected order.
Peter Geoghegan
Patch: <CAM3SWZTBAo4hjbBd780+MrOKiKp_TMo1N3A0Rw9_im8gbD7fQA@mail.gmail.com>
The Assert() here seems unreasonably optimistic. Andreas Seltenreich
found that it could fail with NaNs in the input geometries, and it
seems likely to me that it might fail in corner cases due to roundoff
error, even for ordinary input values. As a band-aid, make the function
return SQL NULL instead of crashing.
Report: <87d1md1xji.fsf@credativ.de>
When heap_update needs to look for a page for the new tuple version,
because the current one doesn't have sufficient free space, or when
columns have to be processed by the tuple toaster, it has to release the
lock on the old page during that. Otherwise there'd be lock ordering and
lock nesting issues.
To avoid concurrent sessions from trying to update / delete / lock the
tuple while the page's content lock is released, the tuple's xmax is set
to the current session's xid.
That unfortunately was done without any WAL logging, thereby violating
the rule that no XIDs may appear on disk, without an according WAL
record. If the database were to crash / fail over when the page level
lock is released, and some activity lead to the page being written out
to disk, the xid could end up being reused; potentially leading to the
row becoming invisible.
There might be additional risks by not having t_ctid point at the tuple
itself, without having set the appropriate lock infomask fields.
To fix, compute the appropriate xmax/infomask combination for locking
the tuple, and perform WAL logging using the existing XLOG_HEAP_LOCK
record. That allows the fix to be backpatched.
This issue has existed for a long time. There appears to have been
partial attempts at preventing dangers, but these never have fully been
implemented, and were removed a long time ago, in
11919160 (cf. HEAP_XMAX_UNLOGGED).
In master / 9.6, there's an additional issue, namely that the
visibilitymap's freeze bit isn't reset at that point yet. Since that's a
new issue, introduced only in a892234f83, that'll be fixed in a
separate commit.
Author: Masahiko Sawada and Andres Freund
Reported-By: Different aspects by Thomas Munro, Noah Misch, and others
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: 9.1/all supported versions
0ac5ad5 started to compress infomask bits in WAL records. Unfortunately
the replay routines for XLOG_HEAP_LOCK/XLOG_HEAP2_LOCK_UPDATED forgot to
reset the HEAP_XMAX_INVALID (and some other) hint bits.
Luckily that's not problematic in the majority of cases, because after a
crash/on a standby row locks aren't meaningful. Unfortunately that does
not hold true in the presence of prepared transactions. This means that
after a crash, or after promotion, row level locks held by a prepared,
but not yet committed, prepared transaction might not be enforced.
Discussion: 20160715192319.ubfuzim4zv3rqnxv@alap3.anarazel.de
Backpatch: 9.3, the oldest branch on which 0ac5ad5 is present.
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.comhttps://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
Digging around bug #14245 I found that commit
6734a1cacd missed that NOT operation is
right associative in opposite to all other. This miss is resposible for
tsquery parser fail on sequence of NOT operations
During normalization of tsquery tree it tries to simplify nested NOT
operations but there it's obvioulsy missed that subsequent node could be
a leaf node (value node)
Bug #14245: Segfault on weird to_tsquery
Reported by David Kellum.
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
Test the external-sort code path in CLUSTER for two different scenarios:
multiple-pass external sorting, and the best case for replacement
selection, where only one run is produced, so that no merge is required.
This test would have caught the bug fixed in commit 1b0fc8507, at
least when run with valgrind enabled.
In passing, add a short-circuit test in plan_cluster_use_sort() to make
dead certain that it selects sorting when enable_indexscan is off. As
things stand, that would happen anyway, but it seems like good future
proofing for this test.
Peter Geoghegan
Discussion: <CAM3SWZSgxehDkDMq1FdiW2A0Dxc79wH0hz1x-TnGy=1BXEL+nw@mail.gmail.com>
We have, for a very long time, allowed the same subplan (same member of the
PlannedStmt.subplans list) to be referenced by more than one SubPlan node;
this avoids problems for cases such as subplans within an IndexScan's
indxqual and indxqualorig fields. However, EXPLAIN had not gotten the memo
and would print each reference as though it were an independent identical
subplan. To fix, track plan_ids of subplans we've printed and don't print
the same plan_id twice. Per report from Pavel Stehule.
BTW: the particular case of IndexScan didn't cause visible duplication
in a plain EXPLAIN, only EXPLAIN ANALYZE, because in the former case we
short-circuit executor startup before the indxqual field is processed by
ExecInitExpr. That seems like it could easily lead to other EXPLAIN
problems in future, but it's not clear how to avoid it without breaking
the "EXPLAIN a plan using hypothetical indexes" use-case. For now I've
left that issue alone.
Although this is a longstanding bug, it's purely cosmetic (no great harm
is done by the repeat printout) and we haven't had field complaints before.
So I'm hesitant to back-patch it, especially since there is some small risk
of ABI problems due to the need to add a new field to ExplainState.
In passing, rearrange order of fields in ExplainState to be less random,
and update some obsolete comments about when/where to initialize them.
Report: <CAFj8pRAimq+NK-menjt+3J4-LFoodDD8Or6=Lc_stcFD+eD4DA@mail.gmail.com>
On a standby, ThisTimelineID is always 0, so we would generate a
filename in timeline 0 even for other timelines. Instead, use starttli
which we have retreived from the controlfile.
Report by: Francesco Canovai in bug #14230
Author: Marco Nenciarini
Reviewed by: Michael Paquier and Amit Kapila
Examination of the results from anole and gharial suggests that we're
only managing to track the size of one of the two stacks of IA64 machines.
Some googling gave the answer: on HPUX11, the register stack is reported
as a page type I don't see in pstat.h on my HPUX10 box. Let's try
testing for that.
After a look at preliminary results from commit 88cf37d2a8,
I realized it'd be a good idea to spew out the maximum depth measurement
seen by check_stack_depth. So add some quick-n-dirty code to do that.
Like the previous commit, this will be reverted once we've gathered
a set of buildfarm runs with it.
This patch is meant to gather information from the buildfarm members, and
will be reverted in a day or so. The idea is to try to find out the
high-water stack consumption while running the regression tests,
particularly on IA64 which is suspected to use much more stack than other
architectures. On machines with pmap, we can use that; but the IA64 farm
members are running HPUX, so also include some bespoke code for HPUX.
(I've tested the latter on HPUX 10/HPPA; not entirely sure it will work
on HPUX 11/IA64, but we'll soon find out.)
Discussion: <CAM-w4HMwwcwaVvYcAH0_FGtG5GeXdYVRfvG81pXnSJWHnCfosQ@mail.gmail.com>
Otherwise, when we abandon incremental memory accounting and use
batch allocation for the final merge pass, we might crash. This
has been broken since 0011c0091e.
Peter Geoghegan, tested by Noah Misch
temp_file_limit is a per-process limit, not a per-session limit across
all cooperating parallel processes; change wording accordingly, per a
suggestion from Tom Lane.
Also, document under max_parallel_workers_per_gather the fact that each
process involved in a parallel query may use as many resources as a
separate session. Caveat emptor.
Per a complaint from Peter Geoghegan.
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
ExecInsertIndexTuples treated an exclusion constraint as subject to
noDupErr processing even when it was not listed in arbiterIndexes, and
would therefore not error out for a conflict in such a constraint, instead
returning it as an arbiter-index failure. That led to an infinite loop in
ExecInsert, since ExecCheckIndexConstraints ignored the index as-intended
and therefore didn't throw the expected error. To fix, make the exclusion
constraint code path use the same condition as the index_insert call does
to decide whether no-error-for-duplicates behavior is appropriate. While
at it, refactor a little bit to avoid unnecessary list_member_oid calls.
(That surely wouldn't save anything worth noticing, but I find the code
a bit clearer this way.)
Per bug report from Heikki Rauhala. Back-patch to 9.5 where ON CONFLICT
was introduced.
Report: <4C976D6B-76B4-434C-8052-D009F7B7AEDA@reaktor.fi>
There isn't really any reason not to; the original comments here were
partly confused about subplans versus subquery-in-FROM, and partly
dependent on restrictions that no longer apply now that subqueries return
Paths not Plans. Depending on what's inside the subquery, it might fail
to produce any parallel_safe Paths, but that's fine.
Tom Lane and Robert Haas
The previous coding assumed that the value derived by
set_rel_consider_parallel() for an appendrel parent would be accurate for
all the appendrel's children; but this is not so, for example because one
child might scan a temp table. Instead, apply set_rel_consider_parallel()
to each child rel as well as the parent, and then take the AND of the
results as controlling parallel safety for the appendrel as a whole.
(We might someday be able to deal more intelligently than this with cases
in which some of the childrels are parallel-safe and others not, but that's
for later.)
Robert Haas and Tom Lane
This was the intention all along, but an extraneous "return;" in
set_rel_consider_parallel() caused sampled rels to never be marked
consider_parallel.
Since we don't have any partial tablesample path/plan type yet, there's
no possibility of parallelizing the sample scan itself; but this fix
allows such a scan to appear below a parallel join, for example.
We were just leaving the cost fields zeroes, which produces obviously bogus
output with force_parallel_mode = on. With force_parallel_mode = regress,
the zeroes are hidden, but I wonder if they wouldn't still confuse add-on
code such as auto_explain.
I'd been wondering why I was sometimes seeing fractional rowcount
estimates in parallel-query situations, and this seems to be the
reason. (You won't see the fractional parts in EXPLAIN, because it
prints rowcounts with %.0f, but they are apparent in the debugger.)
A fractional rowcount is not any saner for a partial path than any
other kind of path, and it's equally likely to break cost estimation
for higher paths, so apply clamp_row_est() like we do in other places.
In commit 915b703e1 I gave get_agg_clause_costs() the responsibility of
marking Aggref nodes with the appropriate aggtranstype. I failed to notice
that where it was being called from, it might see only a subset of the
Aggref nodes that were in the original targetlist. Specifically, if there
are duplicate aggregate calls in the tlist, either make_sort_input_target
or make_window_input_target might put just a single instance into the
grouping_target, and then only that instance would get marked. Fix by
moving the call back into grouping_planner(), before we start building
assorted PathTargets from the query tlist. Per report from Stefan Huehner.
Report: <20160702131056.GD3165@huehner.biz>
In commit 68fa28f77 I tried to teach SS_finalize_plan() to cope with
initPlans attached anywhere in the plan tree, by dint of moving its
handling of those into the recursion in finalize_plan(). It turns out that
that doesn't really work: if a lower-level plan node emits an initPlan
output parameter in its targetlist, it's legitimate for upper levels to
reference those Params --- and at the point where this code runs, those
references look just like the Param itself, so finalize_plan() quite
properly rejects them as being in the wrong place. We could lobotomize
the checks enough to allow that, probably, but then it's not clear that
we'd have any meaningful check for misplaced Params at all. What seems
better, at least in the near term, is to tweak standard_planner() a bit
so that initPlans are never placed anywhere but the topmost plan node
for a query level, restoring the behavior that occurred pre-9.6. Possibly
we can do better if this code is ever merged into setrefs.c: then it would
be possible to check a Param's placement only when we'd failed to replace
it with a Var referencing a child plan node's targetlist.
BTW, I'm now suspicious that finalize_plan is doing the wrong thing by
returning the node's allParam rather than extParam to be incorporated
in the parent node's set of used parameters. However, it makes no
difference given that initPlans only appear at top level, so I'll leave
that alone for now.
Another thing that emerged from this is that standard_planner() needs
to check for initPlans before deciding that it's safe to stick a Gather
node on top in force_parallel_mode mode. We previously guarded against
that by deciding the plan wasn't wholePlanParallelSafe if any subplans
had been found, but after commit 5ce5e4a12 it's necessary to have this
substitute test, because path parallel_safe markings don't account for
initPlans. (Normally, we'd have decided the paths weren't safe anyway
due to appearances of SubPlan nodes, Params, or CTE scans somewhere in
the tree --- but it's possible for those all to be optimized away while
initPlans still remain.)
Per fuzz testing by Andreas Seltenreich.
Report: <874m89rw7x.fsf@credativ.de>
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
There are two problems in the original coding: one is that if one
walreceiver process exits, the ready_to_display flag remains set in
shared memory, exposing the conninfo of the next walreceiver before
obfuscating. Fix by having WalRcvDie reset the flag.
Second, the sleep-and-retry behavior that waited until walreceiver had
set ready_to_display wasn't liked; the preference is to have it return
no data instead, so let's do that.
Bugs in 9ed551e0a reported by Fujii Masao and Michël Paquier.
Author: Michaël Paquier
In the previous design, the GetForeignUpperPaths FDW callback hook was
called before we got around to labeling upper relations with the proper
consider_parallel flag; this meant that any upper paths created by an FDW
would be marked not-parallel-safe. While that's probably just as well
right now, we aren't going to want it to be true forever. Hence, abandon
the idea that FDWs should be allowed to inject upper paths before the core
code has gotten around to creating the relevant upper relation. (Well,
actually they still can, but it's on their own heads how well it works.)
Instead, adopt the same API already designed for create_upper_paths_hook:
we call GetForeignUpperPaths after each upperrel has been created and
populated with the paths the core planner knows how to make.
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
We were merely Assert'ing that the Var matched the RTE it's supposedly
from. But if the user passes incorrect information to pg_get_expr(),
the RTE might in fact not match; this led either to Assert failures
or core dumps, as reported by Chris Hanks in bug #14220. To fix, just
convert the Asserts to test-and-elog. Adjust an existing test-and-elog
elsewhere in the same function to be consistent in wording.
(If we really felt these were user-facing errors, we might promote them to
ereport's; but I can't convince myself that they're worth translating.)
Back-patch to 9.3; the problematic code doesn't exist before that, and
a quick check says that 9.2 doesn't crash on such cases.
Michael Paquier and Thomas Munro
Report: <20160629224349.1407.32667@wrigleys.postgresql.org>
If serialized_snapshot->subxcnt > 0 and serialized_snapshot->xcnt == 0,
the old coding would do the wrong thing and crash. This can happen
on standby servers.
Report by Andreas Seltenreich. Patch by Thomas Munro, reviewed by
Amit Kapila and tested by Andreas Seltenreich.
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
This looks like it would cause changes from subtransactions to be missed
by the iterator being constructed, if those changes had been spilled to
disk previously. This implies that large subtransactions might be lost
(in whole or in part) by logical replication. Found and fixed by
Petru-Florin Mihancea, per bug #14208.
Report: <20160622144830.5791.22512@wrigleys.postgresql.org>
VS2013 apparently has a problem with taking the address of a formal
parameter in some cases. We do that elsewhere without trouble, but
in this case the address is being passed to a subroutine that will
probably get inlined, so maybe the combination of those things is
what tickles the bug. Anyway, introducing an extra copy of the
parameter value is enough to work around it. Per trouble report
from Umair Shahid.
Report: <CAM184AcjqKYZSdQqBHDrnENXHhW=mXbUC46QYPJ=nAh0gUHCGA@mail.gmail.com>
In non-text output formats, parallelized aggregates were reporting
"Partial" or "Finalize" as a field named "Operation", which might be all
right in the absence of any context --- but other plan node types use that
field to report SQL-visible semantics, such as Select/Insert/Update/Delete.
So that naming choice didn't seem good to me. I changed it to "Partial
Mode".
Also, the field did not appear at all for a non-parallelized Agg plan node,
which is contrary to expectation in non-text formats. We're notionally
producing objects that conform to a schema, so the set of fields for a
given node type and EXPLAIN mode should be well-defined. I set it up to
fill in "Simple" in such cases.
Other fields that were added for parallel query, namely "Parallel Aware"
and Gather's "Single Copy", had not gotten the word on that point either.
Make them appear always in non-text output.
Also, the latter two fields were nominally producing boolean output, but
were getting it wrong, because bool values shouldn't be quoted in JSON or
YAML. Somehow we'd not needed an ExplainPropertyBool formatting subroutine
before 9.6; but now we do, so invent it.
Discussion: <16002.1466972724@sss.pgh.pa.us>
Commit b1a9bad9e7 introduced a stats view to provide insight into the
running WAL receiver, but neglected to include the connection string in
it, as reported by Michaël Paquier. This commit fixes that omission.
(Any security-sensitive information is not disclosed).
While at it, close the mild security hole that we were exposing the
password in the connection string in shared memory. This isn't
user-accessible, but it still looks like a good idea to avoid having the
cleartext password in memory.
Author: Michaël Paquier, Álvaro Herrera
Review by: Vik Fearing
Discussion: https://www.postgresql.org/message-id/CAB7nPqStg4M561obo7ryZ5G+fUydG4v1Ajs1xZT1ujtu+woRag@mail.gmail.com
Since get_relation_foreign_keys doesn't try to determine whether RTEs
are actually part of the query semantics, it might make FK info records
linking to RTEs that won't have a RelOptInfo at all. Cope with that.
Per bug #14219 from Andrew Gierth.
Report: <20160629183338.1397.43514@wrigleys.postgresql.org>
If we need to use a gating Result node for pseudoconstant quals,
create_scan_plan() intentionally suppresses use_physical_tlist's checks
on whether there are matches for sortgroupref labels, on the grounds that
we don't need matches because we can label the Result's projection output
properly. However, it then called apply_pathtarget_labeling_to_tlist
anyway. This oversight was harmless when written, but in commit aeb9ae645
I made that function throw an error if there was no match. Thus, the
combination of a table scan, pseudoconstant quals, and a non-simple-Var
sortgroupref column threw the dreaded "ORDER/GROUP BY expression not found
in targetlist" error. To fix, just skip applying the labeling in this
case. Per report from Rushabh Lathia.
Report: <CAGPqQf2iLB8t6t-XrL-zR233DFTXxEsfVZ4WSqaYfLupEoDxXA@mail.gmail.com>
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
It's rather silly to make a separate pass over the tlist + HAVING qual,
and a separate set of visits to the syscache, when get_agg_clause_costs
already has all the required information in hand. This nets out as less
code as well as fewer cycles.
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
Commit e06a38965's original coding for constructing the execution-time
expression tree for a combining aggregate was rather messy, involving
duplicating quite a lot of code in setrefs.c so that it could inject
a nonstandard matching rule for Aggrefs. Get rid of that in favor of
explicitly constructing a combining Aggref with a partial Aggref as input,
then allowing setref's normal matching logic to match the partial Aggref
to the output of the lower plan node and hence replace it with a Var.
In passing, rename and redocument make_partialgroup_input_target to have
some connection to what it actually does.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca9151, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
A deserialize function's result is short-lived data during partial
aggregation, since we're just going to pass it to the combine function
and then it's of no use anymore. However, the built-in deserialize
functions allocated their results in the aggregate state context,
resulting in a query-lifespan memory leak. It's probably not possible for
this to amount to anything much at present, since the number of leaked
results would only be the number of worker processes. But it might become
a problem in future. To fix, don't use the same convenience subroutine for
setting up results that the aggregate transition functions use.
David Rowley
Report: <10050.1466637736@sss.pgh.pa.us>
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>