Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
When the leftover invalid index is "ccold", there's no need to re-run
the command. Reword the instructions to make that explicit.
Backpatch to 12, where REINDEX CONCURRENTLY appeared.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/20200819211312.GA15497@alvherre.pgsql
Put the -r option in the right section (it certainly isn't an
option controlling "the location and format of the output").
Clarify the behavior of the tablespace and waldir options
(that part per gripe from robert@interactive.co.uk).
Make a large number of small copy-editing fixes in text that
visibly wasn't written by native speakers, and try to avoid
grammatical inconsistencies between the descriptions of
the different options.
Back-patch to v13, since HEAD hasn't meaningfully diverged yet.
Discussion: https://postgr.es/m/159749418850.14322.216503677134569752@wrigleys.postgresql.org
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Make these examples self-contained by providing declarations of the
user-defined row types they rely on. There wasn't room to do this
in the old doc format, but now there is, and I think it makes the
examples a good bit less confusing.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
This ought to work much like C's "#elif defined(name)"; but the code
implemented it in a way equivalent to endif followed by ifdef, so that
it didn't matter whether any previous branch of the IF construct had
succeeded. Fix that; add some test cases covering elif and nested IFs;
and improve the documentation, which also seemed a bit confused.
AFAICS the code has been like this since the feature was added in 1999
(commit b57b0e044). So while it's surely wrong, there might be code
out there relying on the current behavior. Hence, don't back-patch
into stable branches. It seems all right to fix it in v13 though.
Per report from Ashutosh Sharma. Reviewed by Ashutosh Sharma and
Michael Meskes.
Discussion: https://postgr.es/m/CAE9k0P=dQk9X0cU2tN49S7a9tv733-e1pVdpB1P-pWJ5PdTktg@mail.gmail.com
The type-name pattern in \dAc and \dAf was matched only to the actual
pg_type.typname string, which is fairly user-unfriendly in cases where
that is not what's shown to the user by format_type (compare "_int4"
and "integer[]"). Make this code match what \dT does, i.e. match the
pattern against either typname or format_type() output. Also fix its
broken handling of schema-name restrictions. (IOW, make these
processSQLNamePattern calls match \dT's.) While here, adjust
whitespace to make the query a little prettier in -E output, too.
Also improve some inaccuracies and shaky grammar in the related
documentation.
Noted while working on a patch for intarray's opclasses; I wondered
why I couldn't get a match to "integer*" for the input type name.
In "High Availability, Load Balancing, and Replication" chapter,
certain descriptions of Pgpool-II were not correct at this point. It
does not need conflict resolution. Also "Multiple-Server Parallel
Query Execution" is not supported anymore.
Discussion: https://postgr.es/m/20200726.230128.53842489850344110.t-ishii%40sraoss.co.jp
Author: Tatsuo Ishii
Reviewed-by: Bruce Momjian
Backpatch-through: 9.5
Partitioned indexes are also registered in pg_inherits, but the
description of this catalog did not reflect that.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87k0ynj35y.fsf@wibble.ilmari.org
Backpatch-through: 11
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The planner is in fact willing to use hash aggregation when work_mem is
not set high enough for everything to fit in memory. This has been the
case since commit 1f39bce0, which added disk-based hash aggregation.
There are a few remaining cases in which hash aggregation is avoided as
a matter of policy when the planner surmises that spilling will be
necessary. For example, callers of choose_hashed_setop() still
conservatively avoid hash aggregation when spilling is anticipated.
That doesn't seem like a good enough reason to mention hash aggregation
in this context.
Backpatch: 13-, where disk-based hash aggregation was introduced.
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
The executor checks for this error, and so does the bootstrap catalog
loader, but we never checked for it in retail catalog manipulations.
The folly of that has now been exposed, so let's add assertions
checking it. Checking in CatalogTupleInsert[WithInfo] and
CatalogTupleUpdate[WithInfo] should be enough to cover this.
Back-patch to v10; the aforesaid functions didn't exist before that,
and it didn't seem worth adapting the patch to the oldest branches.
But given the risk of JIT crashes, I think we certainly need this
as far back as v11.
Pre-v13, we have to explicitly exclude pg_subscription.subslotname
and pg_subscription_rel.srsublsn from the checks, since they are
mismarked. (Even if we change our mind about applying BKI_FORCE_NULL
in the branch tips, it doesn't seem wise to have assertions that
would fire in existing databases.)
Discussion: https://postgr.es/m/298837.1595196283@sss.pgh.pa.us
The code has always set this column to NULL when it's not valid,
but the catalog header's description failed to reflect that,
as did the SGML docs, as did some of the code. To prevent future
coding errors of the same ilk, let's hide the field from C code
as though it were variable-length (which, in a sense, it is).
As with commit 72eab84a5, we can only fix this cleanly in HEAD
and v13; the problem extends further back but we'll need some
klugery in the released branches.
Discussion: https://postgr.es/m/367660.1595202498@sss.pgh.pa.us
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
Due to the layout of this catalog, subslotname has to be explicitly
marked BKI_FORCE_NULL, else initdb will default to the assumption
that it's non-nullable. Since, in fact, CREATE/ALTER SUBSCRIPTION
will store null values there, the existing marking is just wrong,
and has been since this catalog was invented.
We haven't noticed because not much in the system actually depends
on attnotnull being truthful. However, JIT'ed tuple deconstruction
does depend on that in some cases, allowing crashes or wrong answers
in queries that inspect pg_subscription. Commit 9de77b545 quite
accidentally exposed this on the buildfarm members that force JIT
activation.
Back-patch to v13. The problem goes further back, but we cannot
force initdb in released branches, so some klugier solution will
be needed there. Before working on that, push this simple fix
to try to get the buildfarm back to green.
Discussion: https://postgr.es/m/4118109.1595096139@sss.pgh.pa.us
pg_dump produces custom-format archive files that lack data offsets
when it is unable to seek its output. Up to now that's been a hazard
for pg_restore. But if pg_restore is able to seek in the archive
file, there is no reason to throw up our hands when asked to restore
data blocks out of order. Instead, whenever we are searching for a
data block, record the locations of the blocks we passed over (that
is, fill in the missing data-offset fields in our in-memory copy of
the TOC data). Then, when we hit a case that requires going
backwards, we can just seek back.
Also track the furthest point that we've searched to, and seek back
to there when beginning a search for a new data block. This avoids
possible O(N^2) time consumption, by ensuring that each data block
is examined at most twice. (On Unix systems, that's at most twice
per parallel-restore job; but since Windows uses threads here, the
threads can share block location knowledge, reducing the amount of
duplicated work.)
We can also improve the code a bit by using fseeko() to skip over
data blocks during the search.
This is all of some use even in simple restores, but it's really
significant for parallel pg_restore. In that case, we require
seekability of the input already, and we will very probably need
to do out-of-order restores.
Back-patch to v12, as this fixes a regression introduced by commit
548e50976. Before that, parallel restore avoided requesting
out-of-order restores, so it would work on a data-offset-less
archive. Now it will again.
Ideally this patch would include some test coverage, but there are
other open bugs that need to be fixed before we can extend our
coverage of parallel restore very much. Plan to revisit that later.
David Gilman and Tom Lane; reviewed by Justin Pryzby
Discussion: https://postgr.es/m/CALBH9DDuJ+scZc4MEvw5uO-=vRyR2=QF9+Yh=3hPEnKHWfS81A@mail.gmail.com
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
pg_stat_activity.query text is truncated at 1024 bytes. But previously
the document described that it's truncated at 1024 characters.
This was not accurate when considering multibyte characters.
Back-patch to v10 where this inaccurate description was added.
Author: Atsushi Torikoshi
Reviewed-by: Daniel Gustafsson, Fujii Masao
Discussion: https://postgr.es/m/cd5b49a5a14e887542f5f569c1c6bde2@oss.nttdata.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
Enabling pg_stat_statements.track_plaanning may incur a noticeable
performance penalty, especially when a fewer kinds of queries are executed
on many concurrent connections. This commit documents this note.
Back-patch to v13 where pg_stat_statements.track_plaanning was added.
Suggested-by: Pavel Stehule
Author: Fujii Masao
Reviewed-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRC9Jxa8r5i0TNBWLb8mzuaYzEoLq3QOvip0jVpHPOLbVA@mail.gmail.com
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
