Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch adds the pseudo-types anycompatible, anycompatiblearray,
anycompatiblenonarray, and anycompatiblerange. They work much like
anyelement, anyarray, anynonarray, and anyrange respectively, except
that the actual input values need not match precisely in type.
Instead, if we can find a common supertype (using the same rules
as for UNION/CASE type resolution), then the parser automatically
promotes the input values to that type. For example,
"myfunc(anycompatible, anycompatible)" can match a call with one
integer and one bigint argument, with the integer automatically
promoted to bigint. With anyelement in the definition, the user
would have had to cast the integer explicitly.
The new types also provide a second, independent set of type variables
for function matching; thus with "myfunc(anyelement, anyelement,
anycompatible) returns anycompatible" the first two arguments are
constrained to be the same type, but the third can be some other
type, and the result has the type of the third argument. The need
for more than one set of type variables was foreseen back when we
first invented the polymorphic types, but we never did anything
about it.
Pavel Stehule, revised a bit by me
Discussion: https://postgr.es/m/CAFj8pRDna7VqNi8gR+Tt2Ktmz0cq5G93guc3Sbn_NVPLdXAkqA@mail.gmail.com
This commit changes pg_basebackup so that it specifies PROGRESS option in
BASE_BACKUP replication command whether --progress is specified or not.
This causes the server to estimate the total backup size and report it in
pg_stat_progress_basebackup.backup_total, by default. This is reasonable
default because the time required for the estimation would not be so large
in most cases.
Also this commit adds new option --no-estimate-size to pg_basebackup.
This option prevents the server from the estimation, and so is useful to
avoid such estimation time if it's too long.
Author: Fujii Masao
Reviewed-by: Magnus Hagander, Amit Langote
Discussion: https://postgr.es/m/CABUevEyDPPSjP7KRvfTXPdqOdY5aWNkqsB5aAXs3bco5ZwtGHg@mail.gmail.com
This commit renames RecoveryWalAll and RecoveryWalStream wait events to
RecoveryWalStream and RecoveryRetrieveRetryInterval, respectively,
in order to make the names and what they are more consistent. For example,
previously RecoveryWalAll was reported as a wait event while the recovery
was waiting for WAL from a stream, and which was confusing because the name
was very different from the situation where the wait actually could happen.
The names of macro variables for those wait events also are renamed
accordingly.
This commit also changes the category of RecoveryRetrieveRetryInterval to
Timeout from Activity because the wait event is reported while waiting based
on wal_retrieve_retry_interval.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
Commit d06215d03b added a new attribute to pg_statistic_ext catalog, but
failed to add it to document it properly.
Reported-by: Noriyoshi Shinoda <noriyoshi.shinoda@hpe.com>
This commit corrects the descriptions of RecoveryWalAll and RecoveryWalStream
wait events in the documentation.
Back-patch to v10 where those wait events were added.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
Add missing index entries, add missing information on pg_upgrade man
page, order things alphabetical instead of (apparently) in the order
they were implemented, reduce repetitiveness a bit.
Use a varlistentry id for the deduplicate_items storage parameter that
is derived from the name of the parameter itself.
This oversight happened because the storage parameter was renamed
relatively late during the development of the patch that became commit
0d861bbb.
I noticed that we completely failed to document the restriction
that an "anyrange" result type has to be inferred from an "anyrange"
input. The docs also were less clear than they could be about the
relationship between "anyrange" and "anyarray".
It's been like this all along, so back-patch.
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
It's strange that a directory-listing function does not list all entries
in a directory, so let's at least document it. This involves
pg_ls_logdir
pg_ls_waldir
pg_ls_archive_statusdir
pg_ls_tmpdir
Backpatch as far back as it applies cleanly (and as far as as each
function exists). REL_10_STABLE uses different wording, but hopefully
people are not reading docs so old to write new apps anyway.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200305161838.GJ684@telsasoft.com
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The backend type, which corresponds to what
pg_stat_activity.backend_type shows, is added as a column to the
csvlog and can optionally be added to log_line_prefix using the new %b
placeholder.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Until now functional dependencies supported only simple equality clauses
and clauses that can be trivially translated to equalities. This commit
allows estimation of some ScalarArrayOpExpr (IN/ANY) clauses.
For IN clauses we can do this thanks to using operator with equality
semantics, which means an IN clause
WHERE c IN (1, 2, ..., N)
can be translated to
WHERE (c = 1 OR c = 2 OR ... OR c = N)
IN clauses are now considered compatible with functional dependencies,
and rely on the same assumption of consistency of queries with data
(which is an assumption we already used for simple equality clauses).
This applies also to ALL clauses with an equality operator, which can be
considered equivalent to IN clause.
ALL clauses are still considered incompatible, although there's some
discussion about maybe relaxing this in the future.
Author: Pierre Ducroquet
Reviewed-by: Tomas Vondra, Dean Rasheed
Discussion: https://www.postgresql.org/message-id/flat/13902317.Eha0YfKkKy%40pierred-pdoc
This should of course be just "PG_ARGISNULL()".
Also reorder a couple of paras to make the discussion of PG_ARGISNULL
less disjointed.
Back-patch to v10 where the error was introduced.
Laurenz Albe and Tom Lane, per an anonymous docs comment
Discussion: https://postgr.es/m/158399487096.5708.10696365251766477013@wrigleys.postgresql.org
This commit eliminates lossiness in check for missing parent downlinks in
B-tree. Instead of collecting lossy bitmap, we check for missing downlinks
while visiting child pages referenced by downlinks of target level. We
traverse from previous child page to the subsequent child page by right links.
Intermediate pages are candidates to have lost parent downlinks.
Also this commit introduces matching of child high key to the pivot key of
it's parent.
Discussion: https://postgr.es/m/CAPpHfduoF-c4RhOyOm%3D4-Y367%2B8txq9Q6iM_ty0OYc8si1Abww%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Fix up some imprecise comments and poor markup from ba79cb5dc. Also try
to convert the documentation of log_min_duration_sample and friends into
passable English.
When a partitioned table is added to a publication, changes of all of
its partitions (current or future) are published via that publication.
This change only affects which tables a publication considers as its
members. The receiving side still sees the data coming from the
individual leaf partitions. So existing restrictions that partition
hierarchies can only be replicated one-to-one are not changed by this.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
This addresses a couple of issues in the documentation:
- Description of PG_COLOR was missing for some tools (pg_archivecleanup
and pg_test_fsync), while the other descriptions had grammar mistakes.
- pgbench supports more environment variables: PGUSER, PGHOST and
PGPORT.
- vacuumlo, oid2name and pgbench support coloring (HEAD only)
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Daniel Gustafsson, Juan José Santamaría
Flecha
Discussion: https://postgr.es/m/20200304075418.GJ2593@paquier.xyz
Backpatch-through: 12
This commit provides psql commands for listing operator classes, operator
families and its contents in psql. New commands will be useful for exploring
capabilities of both builtin opclasses/opfamilies as well as
opclasses/opfamilies defined in extensions.
Discussion: https://postgr.es/m/1529675324.14193.5.camel%40postgrespro.ru
Author: Sergey Cherkashin, Nikita Glukhov, Alexander Korotkov
Reviewed-by: Michael Paquier, Alvaro Herrera, Arthur Zakirov
Reviewed-by: Kyotaro Horiguchi, Andres Freund
Some reference pages contained id attributes on refname elements.
These were apparently copied around from ancient times, but they don't
serve a purpose. FOP issues minor warnings about them. So it's
easiest to just remove them.
plperl's default handling of bool arguments or results is not terribly
satisfactory, since Perl doesn't consider the string 'f' to be false.
Ideally we'd just fix that, but the backwards-compatibility hazard
would be substantial. Instead, build a TRANSFORM module that can
be optionally applied to provide saner semantics.
Perhaps usefully, this is also about the minimum possible skeletal
example of a plperl transform module; so it might be a better starting
point for user-written transform modules than hstore_plperl or
jsonb_plperl.
Ivan Panchenko
Discussion: https://postgr.es/m/1583013317.881182688@f390.i.mail.ru
SQL includes provisions for numeric Unicode escapes in string
literals and identifiers. Previously we only accepted those
if they represented ASCII characters or the server encoding
was UTF-8, making the conversion to internal form trivial.
This patch adjusts things so that we'll call the appropriate
encoding conversion function in less-trivial cases, allowing
the escape sequence to be accepted so long as it corresponds
to some character available in the server encoding.
This also applies to processing of Unicode escapes in JSONB.
However, the old restriction still applies to client-side
JSON processing, since that hasn't got access to the server's
encoding conversion infrastructure.
This patch includes some lexer infrastructure that simplifies
throwing errors with error cursors pointing into the middle of
a string (or other complex token). For the moment I only used
it for errors relating to Unicode escapes, but we might later
expand the usage to some other cases.
Patch by me, reviewed by John Naylor.
Discussion: https://postgr.es/m/2393.1578958316@sss.pgh.pa.us
Specifically, this patch allows ALTER TYPE to:
* Change the default TOAST strategy for a toastable base type;
* Promote a non-toastable type to toastable;
* Add/remove binary I/O functions for a type;
* Add/remove typmod I/O functions for a type;
* Add/remove a custom ANALYZE statistics functions for a type.
The first of these can be done by the type's owner; all the others
require superuser privilege since misuse could cause problems.
The main motivation for this patch is to allow extensions to
upgrade the feature sets of their data types, so the set of
alterable properties is biased towards that use-case. However
it's also true that changing some other properties would be
a lot harder, as they get baked into physical storage and/or
stored expressions that depend on the type.
Along the way, refactor GenerateTypeDependencies() to make it easier
to call, refactor DefineType's volatility checks so they can be shared
by AlterType, and teach typcache.c that it might have to reload data
from the type's pg_type row, a scenario it never handled before.
Also rearrange alter_type.sgml a bit for clarity (put the
composite-type operations together).
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/20200228004440.b23ein4qvmxnlpht@development
A long time ago, it was necessary to declare datatype I/O functions,
triggers, and language handler support functions in a very type-unsafe
way involving a single pseudo-type "opaque". We got rid of those
conventions in 7.3, but there was still support in various places to
automatically convert such functions to the modern declaration style,
to be able to transparently re-load dumps from pre-7.3 servers.
It seems unnecessary to continue to support that anymore, so take out
the hacks; whereupon the "opaque" pseudo-type itself is no longer
needed and can be dropped.
This is part of a group of patches removing various server-side kluges
for transparently upgrading pre-8.0 dump files. Since we've had few
complaints about dropping pg_dump's support for dumping from pre-8.0
servers (commit 64f3524e2), it seems okay to now remove these kluges.
Discussion: https://postgr.es/m/4110.1583255415@sss.pgh.pa.us
to_char() has long allowed the TM (translation mode) prefix to
specify output of translated month or day names; but that prefix
had no effect in input format strings. Now it does. to_date()
and to_timestamp() will now recognize the same month or day names
that to_char() would output for the same format code. Matching is
case-insensitive (per the active collation's notion of what that
means), just as it has always been for English month/day names
without the TM prefix.
(As per the discussion thread, there are lots of cases that this
feature will not handle, such as alternate day names. But being
able to accept what to_char() will output seems useful enough.)
In passing, fix some shaky English and violations of message
style guidelines in jsonpath errors for the .datetime() method,
which depends on this code.
Juan José Santamaría Flecha, reviewed and modified by me,
with other commentary from Alvaro Herrera, Tomas Vondra,
Arthur Zakirov, Peter Eisentraut, Mark Dilger.
Discussion: https://postgr.es/m/CAC+AXB3u1jTngJcoC1nAHBf=M3v-jrEfo86UFtCqCjzbWS9QhA@mail.gmail.com
Previously the documentation explains that WAL segment files
start at 000000010000000000000000. But the first WAL segment file
that initdb creates is 000000010000000000000001 not
000000010000000000000000. This change was caused by old
commit 8c843fff2d, but the documentation had not been updated
a long time.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: David Zhang
Discussion: https://postgr.es/m/CAHGQGwHOmGe2OqGOmp8cOfNVDivq7dbV74L5nUGr+3eVd2CU2Q@mail.gmail.com
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Add a new bt_metap() column to display the metapage's allequalimage
field. Also add three new columns to contrib/pageinspect's
bt_page_items() function:
* Add a boolean column ("dead") that displays the LP_DEAD bit value for
each non-pivot tuple.
* Add a TID column ("htid") that displays a single heap TID value for
each tuple. This is the TID that is returned by BTreeTupleGetHeapTID(),
so comparable values are shown for pivot tuples, plain non-pivot tuples,
and posting list tuples.
* Add a TID array column ("tids") that displays TIDs from each tuple's
posting list, if any. This works just like the "tids" column from
pageinspect's gin_leafpage_items() function.
No version bump for the pageinspect extension, since there hasn't been a
stable Postgres release since the last version bump (the last bump was
part of commit 58b4cb30).
Author: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzmSMmU2eNvY9+a4MNP+z02h6sa-uxZvN3un6jY02ZVBSw@mail.gmail.com
Access to this module is granted to the pg_monitor role, not
pg_read_all_stats. (Given the view's performance impact,
it seems wise to be restrictive, so I think this was the
correct decision --- and anyway it was clearly intentional.)
Per bug #16279 from Philip Semanchuk.
Discussion: https://postgr.es/m/16279-fcaac33c68aab0ab@postgresql.org
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
Invent the concept of a B-Tree equalimage ("equality implies image
equality") support function, registered as support function 4. This
indicates whether it is safe (or not safe) to apply optimizations that
assume that any two datums considered equal by an operator class's order
method must be interchangeable without any loss of semantic information.
This is static information about an operator class and a collation.
Register an equalimage routine for almost all of the existing B-Tree
opclasses. We only need two trivial routines for all of the opclasses
that are included with the core distribution. There is one routine for
opclasses that index non-collatable types (which returns 'true'
unconditionally), plus another routine for collatable types (which
returns 'true' when the collation is a deterministic collation).
This patch is infrastructure for an upcoming patch that adds B-Tree
deduplication.
Author: Peter Geoghegan, Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
Noah Misch
Bruce Momjian
Tom Lane
Fujii Masao
Jeff Davis
Alvaro Herrera
Peter Eisentraut
Tomas Vondra
Peter Geoghegan
Thomas Munro
Alexander Korotkov
Michael Paquier