This module had a dependency on pgcrypto's md5.c that got removed by
b67b57a. Instead of the code from pgcrypto, this code can just use the
new cryptohash routines for MD5 as a drop-in replacement, so let's just
do this switch. This has also the merit to simplify a bit the
compilation of uuid-ossp.
This requires --with-uuid to be reproduced, and I have used e2fs as a
way to reproduce the failure, then test this commit.
Per reports from buildfarm members longfin, florican and sifaka.
Discussion: https://postgr.es/m/X9GToVd3QmWeNvj8@paquier.xyz
Until recently 'native' was implicitly included via 'orcjit', but a change
included in LLVM 11 (not yet released) removed a number of such indirect
component references.
Reported-By: Fabien COELHO <coelho@cri.ensmp.fr>
Reported-By: Andres Freund <andres@anarazel.de>
Reported-By: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201201064949.mex6kvi2kygby3ni@alap3.anarazel.de
Backpatch: 11-, where jit support was added
Checking for DocBook being installed was valuable when we were on the
OpenSP docs toolchain, because that was rather hard to get installed
fully. Nowadays, as long as you have xmllint and xsltproc installed,
you're good, because those programs will fetch the DocBook files off
the net at need. Moreover, testing this at configure time means that
a network access may well occur whether or not you have any interest
in building the docs later. That can be slow (typically 2 or 3
seconds, though much higher delays have been reported), and it seems
not very nice to be doing an off-machine access without warning, too.
Hence, drop the PGAC_CHECK_DOCBOOK probe, and adjust related
documentation. Without that macro, there's not much left of
config/docbook.m4 at all, so I just removed it.
Back-patch to v11, where we started to use xmllint in the
PGAC_CHECK_DOCBOOK probe.
Discussion: https://postgr.es/m/E2EE6B76-2D96-408A-B961-CAE47D1A86F0@yesql.se
Discussion: https://postgr.es/m/A55A7FC9-FA60-47FE-98B5-139CDC57CE6E@gmail.com
Remove the ability to select random number generator independently from
SSL library. Instead, use the random number generator from the SSL
library (today only OpenSSL supported) if one is configured. If no SSL
library is configured, use the platform default (which means use
CryptoAPI on Win32 and /dev/urandom on Linux).
This also restructures pg_strong_random.c to have three clearly separate
sections, one for each implementation, with two functions in each,
instead of a scattered set of ifdefs throughout the whole file.
Author: Daniel Gustafsson, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/632623.1605460616@sss.pgh.pa.us
We previously put the -isysroot switch only into CPPFLAGS, theorizing
that it was only needed to find the right copies of include files.
However, it seems that we also need to use it while linking programs,
to find the right stub ".tbd" files for libraries. We got away
without that up to now, but apparently that was mostly luck. It may
also be that failures are only observed when the Xcode version is
noticeably out of sync with the host macOS version; the case that's
prompting action right now is that builds fail when using latest Xcode
(12.2) on macOS Catalina, even though it's fine on Big Sur.
Hence, add -isysroot to LDFLAGS as well. (It seems that the more
common practice is to put it in CFLAGS, whence it'd be included at
both compile and link steps. However, we can't mess with CFLAGS in
the platform template file without confusing configure's logic for
choosing default CFLAGS.)
This should be back-patched, but first let's see if the buildfarm
likes it on HEAD.
Report and patch by James Hilliard (some cosmetic mods by me)
Discussion: https://postgr.es/m/20201120003314.20560-1-james.hilliard1@gmail.com
Theoretically one could go into src/test/thread and build/run this
program there. In practice, that hasn't worked since 96bf88d52,
and probably much longer on some platforms (likely including just
the sort of hoary leftovers where this test might be of interest).
While it wouldn't be too hard to repair the breakage, the fact that
nobody has noticed for two years shows that there is zero usefulness
in maintaining this build pathway. Let's get rid of it and decree
that thread_test.c is *only* meant to be built/used in configure.
Given that decision, it makes sense to put thread_test.c under config/
and get rid of src/test/thread altogether, so that's what I did.
In passing, update src/test/README, which had been ignored by some
not-so-recent additions of subdirectories.
Discussion: https://postgr.es/m/227659.1603041612@sss.pgh.pa.us
Hack things so that our idea of "struct stat" is equivalent to Windows'
struct __stat64, allowing it to have a wide enough st_size field.
Instead of relying on native stat(), use GetFileInformationByHandle().
This avoids a number of issues with Microsoft's multiple and rather
slipshod emulations of stat(). We still need to jump through hoops
to deal with ERROR_DELETE_PENDING, though :-(
Pull the relevant support code out of dirmod.c and put it into
its own file, win32stat.c.
Still TODO: do we need to do something different with lstat(),
rather than treating it identically to stat()?
Juan José Santamaría Flecha, reviewed by Emil Iggland;
based on prior work by Michael Paquier, Sergey Zubkovsky, and others
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905CF5099@g01jpexmbkw24
Discussion: https://postgr.es/m/15858-9572469fd3b73263@postgresql.org
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
As of Windows 10 version 1803, Unix-domain sockets are supported on
Windows. But it's not automatically detected by configure because it
looks for struct sockaddr_un and Windows doesn't define that. So we
just make our own definition on Windows and override the configure
result.
Set DEFAULT_PGSOCKET_DIR to empty on Windows so by default no
Unix-domain socket is used, because there is no good standard
location.
In pg_upgrade, we have to do some extra tweaking to preserve the
existing behavior of not using Unix-domain sockets on Windows. Adding
support would be desirable, but it needs further work, in particular a
way to select whether to use Unix-domain sockets from the command-line
or with a run-time test.
The pg_upgrade test script needs a fix. The previous code passed
"localhost" to postgres -k, which only happened to work because
Windows used to ignore the -k argument value altogether. We instead
need to pass an empty string to get the desired effect.
The test suites will continue to not use Unix-domain sockets on
Windows. This requires a small tweak in pg_regress.c. The TAP tests
don't need to be changed because they decide by the operating system
rather than HAVE_UNIX_SOCKETS.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
It was for unclear reasons defined in a separate location, which makes
it more cumbersome to override for testing, and it also did not have
any prominent documentation. Move to pg_config_manual.h, where
similar things are already collected.
The previous definition on the command-line had the effect of defining
it to the value 1, but now that we don't need that anymore we just
define it to empty, to simplify manual editing a bit.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/b7053ba8-b008-5335-31de-2fe4fe41ef0f%402ndquadrant.com
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This removes another relic from the old nmake-based Windows build.
version_stamp.pl put version number information into win32ver.rc. But
win32ver.rc already gets other version number information from the
preprocessor at build time, so it would make more sense if all version
number information would be handled in the same way and we don't have
two places that do it.
What we need for this is having the major version number and the minor
version number as separate integer symbols. Both configure and
Solution.pm already have that logic, because they compute
PG_VERSION_NUM. So we just keep all the logic there now. Put the
minor version number into a new symbol PG_MINORVERSION_NUM. Also, add
a symbol PG_MAJORVERSION_NUM, which is a number, alongside the
existing PG_MAJORVERSION, which is a string.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1ee46ac4-a9b2-4531-bf54-5ec2e374634d@2ndquadrant.com
These compiler features are required by C99, so remove the configure
probes for them.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm; it's been required by POSIX since SUSv2. So remove the
configure probe and tests of HAVE_WCHAR_H.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and c.h's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
stdint.h belongs to the compiler (as opposed to inttypes.h), so by
requiring a C99 compiler we can also require stdint.h
unconditionally. Remove configure checks and other workarounds for
it.
This also removes a few steps in the required portability adjustments
to the imported time zone code, which can be applied on the next
import.
When using GCC on a platform that is otherwise pre-C99, this will now
require at least GCC 4.5, which is the first release that supplied a
standard-conforming stdint.h if the native platform didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/5d398bbb-262a-5fed-d839-d0e5cff3c0d7%402ndquadrant.com
The previous system had configure put the value into the makefiles and
then have the makefiles pass them to the build of pg_config. That was
put in place when pg_config was a shell script. We can simplify that
by having configure put the value into pg_config.h directly. This
also makes the standard build system match how the MSVC build system
already does it.
Discussion: https://www.postgresql.org/message-id/flat/6e457870-cef5-5f1d-b57c-fc89cfb8a788%402ndquadrant.com
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
I had supposed that all versions of Readline that have filename
quoting hooks also have the rl_completion_suppress_quote variable.
But it seems OpenBSD managed to find a version someplace that does
not, so we'll have to expend a separate configure probe for that.
(Light testing suggests that this version also lacks the bugs that
make it necessary to frob that variable. Hooray!)
Per buildfarm.
The Readline library contains a fair amount of knowledge about how to
tab-complete filenames, but it turns out that that doesn't work too well
unless we follow its expectation that we use its filename quoting hooks
to quote and de-quote filenames. We were trying to do such quote handling
within complete_from_files(), and that's still what we have to do if we're
using libedit, which lacks those hooks. But for Readline, it works a lot
better if we tell Readline that single-quote is a quoting character and
then provide hooks that know the details of the quoting rules for SQL
and psql meta-commands.
Hence, resurrect the quoting hook functions that existed in the original
version of tab-complete.c (and were disabled by commit f6689a328 because
they "didn't work so well yet"), and whack on them until they do seem to
work well.
Notably, this fixes bug #16059 from Steven Winfield, who pointed out
that the previous coding would strip quote marks from filenames in SQL
COPY commands, even though they're syntactically necessary there.
Now, we not only don't do that, but we'll add a quote mark when you
tab-complete, even if you didn't type one.
Getting this to work across a range of libedit versions (and, to a
lesser extent, libreadline versions) was depressingly difficult.
It will be interesting to see whether the new regression test cases
pass everywhere in the buildfarm.
Some future patch might try to handle quoted SQL identifiers with
similar explicit quoting/dequoting logic, but that's for another day.
Patch by me, reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/16059-8836946734c02b84@postgresql.org
Supporting very old Python versions is a maintenance burden,
especially with the several variant test files to maintain for Python
<2.6.
Since we have dropped support for older OpenSSL versions in
7b283d0e1d, RHEL 5 is now effectively
desupported, and that was also the only mainstream operating system
still using Python versions before 2.6, so it's a good time to drop
those as well.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/98b69261-298c-13d2-f34d-836fd9c29b21%402ndquadrant.com
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
This function is supported down to OpenSSL 0.9.8, which is the oldest
version supported since 593d4e4 (from Postgres 10 onwards), and is used
since e3bdb2d (from 11 onwards). It is defined as a macro from OpenSSL
0.9.8 to 1.0.2, and as a function in 1.1.0 and newer versions. However,
the configure check present is only adapted for functions. So, even if
the code would be able to compile, configure fails to detect the macro,
causing it to be ignored when compiling the code with OpenSSL from 0.9.8
to 1.0.2.
The code needs a configure check as per a364dfa, which has fixed a
compilation issue with a past version of LibreSSL in NetBSD 5.1. On
HEAD, just remove the configure check as the last release of NetBSD 5 is
from 2014 (and we have no more buildfarm members for it). In 11 and 12,
improve the configure logic so as both macros and functions are
correctly detected. This makes NetBSD 5 still work on already-released
branches, but not for 13 onwards.
The patch for HEAD is from me, and Daniel has written the version to use
for the back-branches.
Author: Michael Paquier, Daniel Gustaffson
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
Discussion: https://postgr.es/m/98F7F99E-1129-41D8-B86B-FE3B1E286881@yesql.se
Backpatch-through: 11
This build option was once useful to maintain compatibility with
version-0 functions, but those are no longer supported, so this option
is no longer useful for end users. We keep the option available to
developers in pg_config_manual.h so that it is easy to test the
pass-by-reference code paths without having to fire up a 32-bit
machine.
Discussion: https://www.postgresql.org/message-id/flat/f3e1e576-2749-bbd7-2d57-3f9dcf75255a@2ndquadrant.com
This completes the task begun in commit 1408d5d86, to synchronize
ECPG's exported definitions with the definition of bool used by
c.h (and, therefore, the one actually in use in the ECPG library).
On practically all modern platforms, ecpglib.h will now just
include <stdbool.h>, which should surprise nobody anymore.
That removes a header-inclusion-order hazard for ECPG clients,
who previously might get build failures or unexpected behavior
depending on whether they'd included <stdbool.h> themselves,
and if so, whether before or after ecpglib.h.
On platforms where sizeof(_Bool) is not 1 (only old PPC-based
Mac systems, as far as I know), things are still messy, as
inclusion of <stdbool.h> could still break ECPG client code.
There doesn't seem to be any clean fix for that, and given the
probably-negligible population of users who would care anymore,
it's not clear we should go far out of our way to cope with it.
This change at least fixes some header-inclusion-order hazards
for our own code, since c.h and ecpglib.h previously disagreed
on whether bool should be char or unsigned char.
To implement this with minimal invasion of ECPG client namespace,
move the choice of whether to rely on <stdbool.h> into configure,
and have it export a configuration symbol PG_USE_STDBOOL.
ecpglib.h no longer exports definitions for TRUE and FALSE,
only their lowercase brethren. We could undo that if we get
push-back about it.
Ideally we'd back-patch this as far as v11, which is where c.h
started to rely on <stdbool.h>. But the odds of creating problems
for formerly-working ECPG client code seem about as large as the
odds of fixing any non-working cases, so we'll just do this in HEAD.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
On recent Red Hat platforms (at least RHEL 8 and Fedora 30, maybe older),
configure's probe for libperl failed if the user forces CFLAGS to be -O0.
This is because some code in perl's inline.h fails to be optimized away
at -O0, and said code doesn't work if compiled without -fPIC.
To fix, add CFLAGS_SL to the compile flags used during the libperl probe.
This is a better simulation of the way that plperl is built, anyway,
so it might forestall other issues in future.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
since people might want to build older branches on these platforms.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
This reverts commit e7ff59686e. It
defined pg_atomic_fetch_add_u32_impl() without defining
pg_atomic_compare_exchange_u32_impl(), which is incompatible with
src/include/port/atomics/fallback.h. Per buildfarm member prairiedog.
Discussion: https://postgr.es/m/7517.1568470247@sss.pgh.pa.us
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
fe0a0b5 has removed the last use of this routine from pgcrypto, leading
to a useless symbol definition and an extra configure check.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20190626142544.GN1714@paquier.xyz
Currently only frogmouth in the buildfarm uses the 32bit params, and
it's not able to build past release 10, so put those last, saving
substantial configure time on more modern systems. Even if we get a
modern 32 bit Windows system at some stage we should probably prefer the
64 bit interface here these days.
Test for the compiler builtins __builtin_clz, __builtin_ctz, and
__builtin_popcount, and make use of these in preference to
handwritten C code if they're available. Create src/port
infrastructure for "leftmost one", "rightmost one", and "popcount"
so as to centralize these decisions.
On x86_64, __builtin_popcount generally won't make use of the POPCNT
opcode because that's not universally supported yet. Provide code
that checks CPUID and then calls POPCNT via asm() if available.
This requires indirecting through a function pointer, which is
an annoying amount of overhead for a one-instruction operation,
but it's probably not worth working harder than this for our
current use-cases.
I'm not sure we've found all the existing places that could profit
from this new infrastructure; but we at least touched all the
ones that used copied-and-pasted versions of the bitmapset.c code,
and got rid of multiple copies of the associated constant arrays.
While at it, replace c-compiler.m4's one-per-builtin-function
macros with a single one that can handle all the cases we need
to worry about so far. Also, because I'm paranoid, make those
checks into AC_LINK checks rather than just AC_COMPILE; the
former coding failed to verify that libgcc has support for the
builtin, in cases where it's not inline code.
David Rowley, Thomas Munro, Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Deal with silent-underflow errors in float4 for cygwin and mingw by
using our strtof() wrapper; deal with misrounding errors by adding
them to the resultmap. Some slight reorganization of declarations was
done to avoid duplicating material between cygwin.h and win32_port.h.
While here, remove from the resultmap all references to
float8-small-is-zero; inspection of cygwin output suggests it's no
longer required there, and the freebsd/netbsd/openbsd entries should
no longer be necessary (these date back to c. 2000). This commit
doesn't remove the file itself nor the documentation references for
it; that will happen in a subsequent commit if all goes well.
This reverts commits fc6c72747a, 109de05cbb, d0b4663c23 and
711bab1e4d.
Somebody will have to try harder before submitting this patch again.
I've spent entirely too much time on it already, and the #ifdef maze yet
to be written in order for it to build at all got on my nerves. The
amount of work needed to get a platform-specific performance improvement
that's barely above the noise level is not worth it.
Split out these new functions in three parts: one in a new file that
uses the compiler builtin and gets compiled with the -mpopcnt compiler
option if it exists; another one that uses the compiler builtin but not
the compiler option; and finally the fallback with open-coded
algorithms.
Split out the configure logic: in the original commit, it was selecting
to use the -mpopcnt compiler switch together with deciding whether to
use the compiler builtin, but those two things are really separate.
Split them out. Also, expose whether the builtin exists to
Makefile.global, so that src/port's Makefile can decide whether to
compile the hw-optimized file.
Remove CPUID test for CTZ/CLZ. Make pg_{right,left}most_ones use either
the compiler intrinsic or open-coded algo; trying to use the
HW-optimized version is a waste of time. Make them static inline
functions.
Discussion: https://postgr.es/m/20190213221719.GA15976@alvherre.pgsql
We were using uint64 function arguments as "long int" arguments to
compiler builtins, which fails on machines where long ints are 32 bits:
the upper half of the uint64 was being ignored. Fix by using the "ll"
builtin variants instead, which on those machines take 64 bit arguments.
Also, remove configure tests for __builtin_popcountl() (as well as
"long" variants for ctz and clz): the theory here is that any compiler
version will provide all widths or none, so one test suffices. Were
this theory to be wrong, we'd have to add tests for
__builtin_popcountll() and friends, which would be tedious.
Per failures in buildfarm member lapwing and ensuing discussion.
These opcodes have been around in the AMD world since 2007, and 2008 in
the case of intel. They're supported in GCC and Clang via some __builtin
macros. The opcodes may be unavailable during runtime, in which case we
fall back on a C-based implementation of the code. In order to get the
POPCNT instruction we must pass the -mpopcnt option to the compiler. We
do this only for the pg_bitutils.c file.
David Rowley (with fragments taken from a patch by Thomas Munro)
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Using strtod() creates a double-rounding problem; the input decimal
value is first rounded to the nearest double; rounding that to the
nearest float may then give an incorrect result.
An example is that 7.038531e-26 when input via strtod and then rounded
to float4 gives 0xAE43FEp-107 instead of the correct 0xAE43FDp-107.
Values output by earlier PG versions with extra_float_digits=3 should
all be read in with the same values as previously. However, values
supplied by other software using shortest representations could be
mis-read.
On platforms that lack a strtof() entirely, we fall back to the old
incorrect rounding behavior. (As strtof() is required by C99, such
platforms are considered of primarily historical interest.) On VS2013,
some workarounds are used to get correct error handling.
The regression tests now test for the correct input values, so
platforms that lack strtof() will need resultmap entries. An entry for
HP-UX 10 is included (more may be needed).
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/871s5emitx.fsf@news-spur.riddles.org.uk
Discussion: https://postgr.es/m/87d0owlqpv.fsf@news-spur.riddles.org.uk
The comment marker "#" is copied to the output, so it's only
appropriate for comments that make sense in the shell output. For
comments about the Autoconf language, "dnl" should be used.
While Windows (allegedly) has _configthreadlocale() pretty far back,
it seems MinGW didn't acquire support for that till more recently.
Fortunately, we can use an autoconf probe on that toolchain,
instead of guessing whether it's there. (Hm, I wonder whether Cygwin
will need this also.)
Per buildfarm.
Discussion: https://postgr.es/m/20190121193512.tdmcnic2yjxlufaw@alap3.anarazel.de
ecpglib attempts to force the LC_NUMERIC locale to "C" while reading
server output, to avoid problems with strtod() and related functions.
Historically it's just issued setlocale() calls to do that, but that
has major problems if we're in a threaded application. setlocale()
itself is not required by POSIX to be thread-safe (and indeed is not,
on recent OpenBSD). Moreover, its effects are process-wide, so that
we could cause unexpected results in other threads, or another thread
could change our setting.
On platforms having uselocale(), which is required by POSIX:2008,
we can avoid these problems by using uselocale() instead. Windows
goes its own way as usual, but we can make it safe by using
_configthreadlocale(). Platforms having neither continue to use the
old code, but that should be pretty much nobody among current systems.
This should get back-patched, but let's see what the buildfarm
thinks of it first.
Michael Meskes and Tom Lane; thanks also to Takayuki Tsunakawa.
Discussion: https://postgr.es/m/31420.1547783697@sss.pgh.pa.us
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
Recent OpenBSD (at least 5.9 and up) has a version of getopt(3)
that will not cope with the "-:" spec we use to accept double-dash
options in postgres.c and postmaster.c. Admittedly, that's a hack
because POSIX only requires getopt() to allow alphanumeric option
characters. I have no desire to find another way, however, so
let's just do what we were already doing on Solaris: force use
of our own src/port/getopt.c implementation.
In passing, improve some of the comments around said implementation.
Per buildfarm and local testing. Back-patch to all supported branches.
Discussion: https://postgr.es/m/30197.1547835700@sss.pgh.pa.us
AC_ARG_VAR is necessary if an environment variable influences a
configure result that is then used by other tests that are cached.
With AC_ARG_VAR, a change in the variable is detected on subsequent
configure runs and the user is then advised to remove the cache.
This adds AC_ARG_VAR calls for: MSGFMT, PERL, PYTHON, TCLSH, XML2_CONFIG
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/30672.1546816567@sss.pgh.pa.us
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
It appears that all platforms that have sys_siglist[] also have
strsignal(), making that fallback case in pg_strsignal() dead code.
Getting rid of it allows dropping a configure test, which seems worth
more than providing textual signal descriptions on whatever platforms
might still hypothetically have use for the fallback case.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
This change doesn't fix any bugs that we've heard about, but it seems
like a good idea on general principles to track upstream occasionally.
Discussion: https://postgr.es/m/3320.1542647565@sss.pgh.pa.us
Calling AC_CHECK_DECLS before we've finished setting up the compiler's
CFLAGS seems like a pretty risky proposition, especially now that the
first use of that macro will result in a test to see whether the compiler
gives warning or error for undeclared built-in functions. That answer
could very easily get changed later than where PGAC_LLVM_SUPPORT is
called; furthermore, it's hardly unlikely that flags such as -D_GNU_SOURCE
could change visibility of declarations. Hence, be a little less cavalier
about where to do LLVM-related tests. This results in v11 and HEAD doing
the warning-or-error check at the same place in the script as older
branches are doing it, which seems like a good thing.
Per further thought about commits 0b59b0e8b and 16fbac39f.
The test case that Autoconf uses to discover whether a function has
been declared doesn't work reliably with clang, because clang reports
a warning not an error if the name is a known built-in function.
On some platforms, this results in a lot of compile-time warnings about
strlcpy and related functions not having been declared.
There is a fix for this (by Noah Misch) in the upstream Autoconf sources,
but since they've not made a release in years and show no indication of
doing so anytime soon, let's just absorb their fix directly. We can
revert this when and if we update to a newer Autoconf release.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/26819.1542515567@sss.pgh.pa.us
Any Autoconf macro that uses AC_REQUIRES -- directly or indirectly --
must not be inside a plain shell "if" test; if it is, whatever code
gets pulled in by the AC_REQUIRES will also be inside that "if".
Instead of "if" we can use AS_IF, which knows how to get this right
(cf commit 01051a987).
The only immediate problem from getting this wrong was that AC_PROG_AWK
had to be run twice, once inside the "if llvm" block and once in the
main line. However, it broke a different patch I'm about to submit
more thoroughly.
Add another transfer mode --clone to pg_upgrade (besides the existing
--link and the default copy), using special file cloning calls. This
makes the file transfer faster and more space efficient, achieving
speed similar to --link mode without the associated drawbacks.
On Linux, file cloning is supported on Btrfs and XFS (if formatted with
reflink support). On macOS, file cloning is supported on APFS.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Forward to POSIX pread() and pwrite(), or emulate them if unavailable.
The emulation is not perfect as the file position is changed, so
we'll put pg_ prefixes on the names to minimize the risk of confusion
in future patches that might inadvertently try to mix pread() and read()
on the same file descriptor.
Author: Thomas Munro
Reviewed-by: Tom Lane, Jesper Pedersen
Discussion: https://postgr.es/m/CAEepm=02rapCpPR3ZGF2vW=SBHSdFYO_bz_f-wwWJonmA3APgw@mail.gmail.com
I added HAVE_IPV6 to Makefile.global way back in commit 7703e55c3
so that we could transmit its value to the shell-script version of
initdb. Since initdb was rewritten in C, it's been finding that
out from pg_config.h instead, so this is useless. Keeping it here
just wastes configure and make cycles, plus it's a potential
two-sources-of-truth problem.
The solution arrived at in commit e74dd00f5 presumes that the compiler
has a suitable default -isysroot setting ... but further experience
shows that in many combinations of macOS version, XCode version, Xcode
command line tools version, and phase of the moon, Apple's compiler
will *not* supply a default -isysroot value.
We could potentially go back to the approach used in commit 68fc227dd,
but I don't have a lot of faith in the reliability or life expectancy of
that either. Let's just revert to the approach already shipped in 11.0,
namely specifying an -isysroot switch globally. As a partial response to
the concerns raised by Jakob Egger, adjust the contents of Makefile.global
to look like
CPPFLAGS = -isysroot $(PG_SYSROOT) ...
PG_SYSROOT = /path/to/sysroot
This allows overriding the sysroot path at build time in a relatively
painless way.
Add documentation to installation.sgml about how to use the PG_SYSROOT
option. I also took the opportunity to document how to work around
macOS's "System Integrity Protection" feature.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
To avoid the sorts of problems complained of by Jakob Egger, it'd be
best if configure didn't emit any references to the sysroot path at all.
In the case of PL/Tcl, we can do that just by keeping our hands off the
TCL_INCLUDE_SPEC string altogether. In the case of PL/Perl, we need to
substitute -iwithsysroot for -I in the compile commands, which is easily
handled if we change to using a configure output variable that includes
the switch not only the directory name. Since PL/Tcl and PL/Python
already do it like that, this seems like good consistency cleanup anyway.
Hence, this replaces the advice given to Perl-related extensions in commit
5e2217131; instead of writing "-I$(perl_archlibexp)/CORE", they should
just write "$(perl_includespec)". (The old way continues to work, but not
on recent macOS.)
It's still the case that configure needs to be aware of the sysroot
path internally, but that's cleaner than what we had before.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
Rethink the solution applied in commit 5e2217131 to get PL/Tcl to
build on macOS Mojave. I feared that adding -isysroot globally might
have undesirable consequences, and sure enough Jakob Egger reported
one: it complicates building extensions with a different Xcode version
than was used for the core server. (I find that a risky proposition
in general, but apparently it works most of the time, so we shouldn't
break it if we don't have to.)
We'd already adopted the solution for PL/Perl of inserting the sysroot
path directly into the -I switches used to find Perl's headers, and we
can do the same thing for PL/Tcl by changing the -iwithsysroot switch
that Apple's tclConfig.sh reports. This restricts the risks to PL/Perl
and PL/Tcl themselves and directly-dependent extensions, which is a lot
more pleasing in general than a global -isysroot switch.
Along the way, tighten the test to see if we need to inject the sysroot
path into $perl_includedir, as I'd speculated about upthread but not
gotten round to doing.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
NetBSD-current generates a large number of warnings about "%m" not
being appropriate to use with *printf functions. While that's true
for their native printf, it's surely not true for snprintf.c, so I
think they have misunderstood gcc's definition of the "gnu_printf"
archetype. Nonetheless, choosing "__syslog__" instead silences the
warnings; so teach configure about that.
Since this is only a cosmetic warning issue (and anyway it depends
on previous hacking to be self-consistent), no back-patch.
Discussion: https://postgr.es/m/16785.1539046036@sss.pgh.pa.us
In combination, these changes make our version of snprintf as fast
or faster than most platforms' native snprintf, except for cases
involving floating-point conversion (which we still delegate to
the native sprintf). The speed penalty for a float conversion
is down to around 10% though, much better than before.
Notable changes:
* Rather than always parsing the format twice to see if it contains
instances of %n$, do the extra scan only if we actually find a $.
This obviously wins for non-localized formats, and even when there
is use of %n$, we can avoid scanning text before the first % twice.
* Use strchrnul() if available to find the next %, and emit the
literal text between % escapes as strings rather than char-by-char.
* Create a bespoke function (dopr_outchmulti) for the common case
of emitting N copies of the same character, in place of writing
loops around dopr_outch.
* Simplify construction of the format string for invocations of sprintf
for floats.
* Const-ify some internal functions, and avoid unnecessary use of
pass-by-reference arguments.
Patch by me, reviewed by Andres Freund
Discussion: https://postgr.es/m/11787.1534530779@sss.pgh.pa.us
The method we've traditionally used, of redeclaring strerror_r() to
see if the compiler complains of inconsistent declarations, turns out
not to work reliably because some compilers only report a warning,
not an error. Amazingly, this has gone undetected for years, even
though it certainly breaks our detection of whether strerror_r
succeeded.
Let's instead test whether the compiler will take the result of
strerror_r() as a switch() argument. It's possible this won't
work universally either, but it's the best idea I could come up with
on the spur of the moment.
We should probably back-patch this once the dust settles, but
first let's see what the buildfarm thinks of it.
Discussion: https://postgr.es/m/10877.1537993279@sss.pgh.pa.us
We've spent an awful lot of effort over the years in coping with
platform-specific vagaries of the *printf family of functions. Let's just
forget all that mess and standardize on always using src/port/snprintf.c.
This gets rid of a lot of configure logic, and it will allow a saner
approach to dealing with %m (though actually changing that is left for
a follow-on patch).
Preliminary performance testing suggests that as it stands, snprintf.c is
faster than the native printf functions for some tasks on some platforms,
and slower for other cases. A pending patch will improve that, though
cases with floating-point conversions will doubtless remain slower unless
we want to put a *lot* of effort into that. Still, we've not observed
that *printf is really a performance bottleneck for most workloads, so
I doubt this matters much.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
elog.c has long had a private strerror wrapper that handles assorted
possible failures or deficiencies of the platform's strerror. On Windows,
it also knows how to translate Winsock error codes, which the native
strerror does not. Move all this code into src/port/strerror.c and
define strerror() as a macro that invokes it, so that both our frontend
and backend code will have all of this behavior.
I believe this constitutes an actual bug fix on Windows, since AFAICS
our frontend code did not report Winsock error codes properly before this.
However, the main point is to lay the groundwork for implementing %m
in src/port/snprintf.c: the behavior we want %m to have is this one,
not the native strerror's.
Note that this throws away the prior use of src/port/strerror.c,
which was to implement strerror() on platforms lacking it. That's
been dead code for nigh twenty years now, since strerror() was
already required by C89.
We should likewise cause strerror_r to use this behavior, but
I'll tackle that separately.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
Apple's latest rearrangements of the system-supplied headers have broken
building of PL/Perl and PL/Tcl. The only practical way to fix PL/Tcl is to
start using the "-isysroot" compiler flag to point to SDK-supplied headers,
as Apple expects. We must also start distinguishing where to find Perl's
headers from where to find its shared library; but that seems like good
cleanup anyway.
Extensions that formerly did something like -I$(perl_archlibexp)/CORE
should now do -I$(perl_includedir)/CORE instead. perl_archlibexp
is still the place to look for libperl.so, though.
If for some reason you don't like the default -isysroot setting, you can
override that by setting PG_SYSROOT in configure's arguments. I don't
currently think people would need to do so, unless maybe for cross-version
build purposes.
In addition, teach configure where to find tclConfig.sh. Our traditional
method of searching $auto_path hasn't worked for the last couple of macOS
releases, and it now seems clear that Apple's not going to change that.
The workaround of manually specifying --with-tclconfig was annoying
already, but Mojave's made it a lot more so because the sysroot path now
has to be included as well. Let's just wire the knowledge into configure
instead. To avoid breaking builds against non-default Tcl installations
(e.g. MacPorts) wherein the $auto_path method probably still works,
arrange to try the additional case only after all else has failed.
Back-patch to all supported versions, since at least the buildfarm
cares about that. The changes are set up to not do anything on macOS
releases that are old enough to not have functional sysroot trees.
Previously, pgbench always used select(2) for this purpose, but that's
problematic for very high client counts, because select() can't deal
with file descriptor numbers larger than FD_SETSIZE. It's pretty common
for that to be only 1024 or so, whereas modern OSes can allow many more
open files than that. Using poll(2) would surmount that problem, but it
creates another one: poll()'s timeout resolution is only 1ms, which is
poor enough to cause problems with --rate specifications approaching or
exceeding 1K TPS.
On platforms that have ppoll(2), which includes Linux and recent
FreeBSD, we can use that to avoid the FD_SETSIZE problem without any
loss of timeout resolution. Hence, add configure logic to test for
ppoll(), and use it if available.
This patch introduces an abstraction layer into pgbench that could
be extended to support other kernel event-wait APIs such as kevents.
But actually adding such support is a matter for some future patch.
Doug Rady, reviewed by Robert Haas and Fabien Coelho, and whacked around
a good bit more by me
Discussion: https://postgr.es/m/23D017C9-81B7-484D-8490-FD94DEC4DF59@amazon.com
Michael Paquier
Andres Freund
Tom Lane
Magnus Hagander
Peter Eisentraut
Alvaro Herrera
Thomas Munro
Bruce Momjian
Noah Misch
Andrew Dunstan
Andrew Gierth
Peter Eisentraut