With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the
minimum required version up from Python 2.6 (or 2.4, before v13).
Also, sysconfig didn't exist in Python 3.1, so the minimum 3.x
version is now 3.2.
Back-patch of commit bd233bdd8 into all supported branches.
In v10, this also includes back-patching v11's beff4bb9c, primarily
because this opinion is clearly out-of-date:
While at it, get rid of the code's assumption that both the major and
minor numbers contain exactly one digit. That will foreseeably be
broken by Python 3.10 in perhaps four or five years. That's far enough
out that we probably don't need to back-patch this.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
I had a brain fade in commit d32899157, and used 2:30AM as the
example timestamp for both spring-forward and fall-back cases.
But it's not actually ambiguous at all in the fall-back case,
because that transition is from 2AM to 1AM under USA rules.
Fix the example to use 1:30AM, which *is* ambiguous.
Noted while answering a question from Aleksander Alekseev.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2191355.1641828552@sss.pgh.pa.us
The link used in the documentation is dead, and the only options to have
an access to this part of the SQL specification are not free. Like any
other books referred, just remove the link to keep some neutrality but
keep its reference.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/989abd7d-af30-ab52-1201-bf0b4f33b872@xs4all.nl
Backpatch-through: 12
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
In commit 791090bd7, I made an effort to fill in documentation
for all geometric operators listed in pg_operator. However,
it now appears that at least some of the omissions may have been
intentional, because some of those operator entries point at
unimplemented stub functions. Remove those from the docs again.
(In HEAD, poly_distance stays, because c5c192d7b just added an
implementation for it.)
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
ATTACHing a table into a partition tree whose root is published using a
publication with publish_via_partition_root set to true does not result in
the table's existing contents being replicated. This happens because
subscriber doesn't consider replicating the newly attached partition as
the root table is already in a 'ready' state.
This behavior was introduced in PG13 (83fd4532a7) where we allowed to
publish partition changes via ancestors.
We can consider fixing this limitation in the future.
Author: Amit Langote
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
Clarify that the results of nextval and setval are not guaranteed
persistent until the calling transaction commits. Some people
seem to have drawn the opposite conclusion from the statement that
these functions are never rolled back, so re-word to avoid saying
it quite that way.
Discussion: https://postgr.es/m/CAKU4AWohO=NfM-4KiZWvdc+z3c1C9FrUBR6xnReFJ6sfy0i=Lw@mail.gmail.com
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
The "See also" section on the reference page for CREATE PUBLICATION
didn't match the cross references on CREATE SUBSCRIPTION and their
ALTER counterparts. Fixed by adding an xref to the CREATE and ALTER
SUBSCRIPTION pages. Backpatch down to v10 where CREATE PUBLICATION
was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvGWd3-Ktn96c-z6uq-8TGVVP=TPOkEovkEfntoo2mRhw@mail.gmail.com
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first.
Also as usual for a .1 release, there are some entries here that
are not really relevant for v14 because they already appeared in 14.0.
Those'll be removed later.
The documentation was imprecise about the starting LSN used for WAL
streaming if nothing can be found in the local archive directory
defined with the pg_receivewal command, so be more talkative on this
matter.
Extracted from a larger patch by the same author.
Author: Ronan Dunklau, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Backpatch-through: 10
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 9868167500 added pg_stat_replication_slots view to monitor
ReorderBuffer stats but mistakenly added it under
"Dynamic Statistics Views" section in the docs whereas it belongs to
"Collected Statistics Views" section.
Author: Amit Kapila
Reviewed-by: Masahiko Sawada
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1Kb5ur=OC-G4cAsqPOjoVe+S8LNw1WmUY8Owasjk8o5WQ@mail.gmail.com
Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Index vacuums may happen multiple times depending on the number of dead
tuples stored, as of maintenance_work_mem for a manual VACUUM. For
autovacuum, this is controlled by autovacuum_work_mem instead, if set.
The documentation mentioned the former, but not the latter in the
context of autovacuum.
Reported-by: Nikolai Berkoff
Author: Laurenz Albe, Euler Taveira
Discussion: https://postgr.es/m/161545365522.10134.12195402324485546870@wrigleys.postgresql.org
Backpatch-through: 9.6
Improve various item descriptions. Rearrange some things into
(IMO) more logical order. Fix missing markup and dubious
choices of link destinations. Drop a couple of items that
were later back-patched or otherwise don't seem to need
to be documented here.
The available refresh options are specified as refresh_options under
REFRESH PUBLICATION, and DROP PUBLICATION itself has an option named
refresh. Clarify what we mean by refresh options to avoid confusion.
Backpatch through v14 where ALTER SUBSCRIPTION ... DROP PUBLICATION
was introduced.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoCm1wJ3A8Q9EmBjRbShYkJ+o+Oa_z9O0hvwhvhUa2BSyg@mail.gmail.com
Backpatch-through: 14
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Commit 6c3ffd6 added a couple new predefined roles but didn't properly
wrap the SQL commands mentioned in the description of those roles with
command tags, so add them now.
Backpatch-through: 14
Reported-by: Michael Banck
Discussion: https://postgr.es/m/606d8b1c.1c69fb81.3df04.1a99@mx.google.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Since commit e462856a7a, pg_upgrade automatically creates a script to
update extensions, so mention that instead of ALTER EXTENSION.
Backpatch-through: 9.6
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
It wasn't all that clear which lock levels, if any, would be held on the
DEFAULT partition during an ATTACH PARTITION operation.
Also, clarify which locks will be taken if the DEFAULT partition or the
table being attached are themselves partitioned tables.
Here I'm only backpatching to v12 as before then we obtained an ACCESS
EXCLUSIVE lock on the partitioned table. It seems much less relevant to
mention which locks are taken on other tables when the partitioned table
itself is locked with an ACCESS EXCLUSIVE lock.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAEze2WiTB6iwrV8W_J=fnrnZ7fowW3qu-8iQ8zCHP3FiQ6+o-A@mail.gmail.com
Backpatch-through: 12
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
Ensure to properly mark up function parameters in text with <parameter>,
avoid using <acronym> for terms which aren't acronyms and properly place
the ", and" in a value list. The acronym removal is a follow-up to commit
fb72a7b8c3 which removed it for minmax-multi. In passing, also fix an
incorrectly cased word.
Author: Ekaterina Kiryanova <e.kiryanova@postgrespro.ru>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/c050ecbc-80b2-b360-3c1d-9fe6a6a11bb5@postgrespro.ru
Backpatch-through: v14
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
This commit fixes wrong wording like "a fewer kinds"
in the description about track_planning option.
Back-patch to v13 where pg_stat_statements.track_planning was added.
Author: Justin Pryzby
Reviewed-by: Julien Rouhaud, Fujii Masao
Discussion: https://postgr.es/m/20210418233615.GB7256@telsasoft.com
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
This adds MITM and SNI as acronyms, as the documentation already had
them marked up with <acronym>.
While on it, make sure to spell man-in-the-middle with dashes
consistently, and add acronyms for those new terms where appropriate.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CE12DD5C-4BB3-4166-BC9A-39779568734C@yesql.se
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
We have a dozen PQset*() functions. PQresultSetInstanceData() and this
were the libpq setter functions having a different word order. Adopt
the majority word order.
Reviewed by Alvaro Herrera and Robert Haas, though this choice of name
was not unanimous.
Discussion: https://postgr.es/m/20210605060555.GA216695@rfd.leadboat.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
This was missing in the section dedicated to the supported environment
variables of libpq. Oversight in f5465fa.
Reviewed-by: Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/YLhI0mLoRkY3u4Wj@paquier.xyz
The previous arrangement was just one big list, and the internal order
was not all consistent either. Now arrange the options by group and
sort them, the way it's already done in the --help output and one
other reference pages. Also fix some ordering in the --help output.
Clarify libpq.sgml's description of service file locations and
semantics. Avoid use of backtick'ed pg_config calls to describe
paths; that doesn't work on Windows, and even on Unix it's an
idiom that not all readers may be instantly familiar with.
Don't overspecify the locations of include files, instead writing
only as much as you'd use in #include directives. The previous text
in these places was incorrect for some installations, depending on
where "postgresql" is in the install path.
Our convention for referencing the user's home directory seems
to be "~", so change the one place that spelled it "$HOME".
install-windows.sgml follows the platform convention of spelling
file paths with "\", so change the one place that used "/".
Haiying Tang and Tom Lane
Discussion: https://postgr.es/m/162149020918.26174.7150424047314144297@wrigleys.postgresql.org
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
This is an oversight from bbe0a81d, where the equivalent option exists
in pg_dump. This is useful to be able to reset the compression methods
cluster-wide when restoring the data based on default_toast_compression.
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/YKHC+qCJvzCRVCpY@paquier.xyz
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Make sample like_regex match string values of the root object instead of the
whole document. The corrected example seems to represent a more relevant
use case.
Backpatch to 12, when jsonpath was introduced.
Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
Since its introduction in bbe0a81, compression of table data supports
LZ4, but nothing had been done within the MSVC scripts to allow users to
build the code with this library.
This commit closes the gap by extending the MSVC scripts to be able to
build optionally with LZ4. Getting libraries that can be used for
compilation and execution is possible as LZ4 can be compiled down to
MSVC 2010 using its source tarball. MinGW may require extra efforts to
be able to work, and I have been able to test this only with MSVC, still
this is better than nothing to give users a way to test the feature on
Windows.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/YJPdNeF68XpwDDki@paquier.xyz
"make dist", in charge of creating a distribution tarball, failed when
attempting to generate ./INSTALL as a new reference added to
guc-default-toast-compression on the documentation for the installation
details was not getting translated properly to plain text. Like all the
other link references on this page, this adds a new entry to
standalone-profile.xsl to allow the generation of ./INSTALL to finish
properly.
Oversight in 02a93e7, per buildfarm member guaibasaurus.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
The upstream project is officially named "LZ4", and the documentation
was confused with the option value that can be used with DDLs supporting
this option, and the project name.
Documentation related to the configure option --with-lz4 was missing, so
add something for that.
Author: Dilip Kumar, Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YJaOZQDXBVySq+Cc@paquier.xyz
The docs mentioned expression indexes as a way to improve selectivity
estimates for functions, but we have a second option to improve that by
creating extended statistics. So mention that too.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20210505210947.GA27406%40telsasoft.com
The per-index collation version tracking feature was reverted, but we
still have the ability to ask Windows (352f6f2d) and FreeBSD
(ca051d8b) for collation versions to store in pg_collation.collversion.
So, from the reverted patch, take a few words of documentation about
libc on all three supported OSes to replace the pre-existing note that
mentioned only glibc.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
The grammar changes in commit bbe0a81db6
allow SET COMPRESSION to be used with ALTER MATERIALIZED VIEW as
well as with ALTER TABLE, so update those docs to say that it works.
Also, update the documentation for the pg_column_compression()
to explain that it will return NULL when there's no relevant value.
Patch by me, per concerns from Michael Paquier.
Discussion: http://postgr.es/m/CA+Tgmob9h5u4iNL9KM0drZgkY-JL4oCVW0dWrMqtLPQ1zHkquA@mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, a lot of information about type regclass existed only
in the discussion of the sequence functions. Maybe that made sense
in the beginning, because I think originally those were the only
functions taking regclass. But it doesn't make sense anymore.
Move that material to the "Object Identifier Types" section in
datatype.sgml, generalize it to talk about the other reg* types
as well, and add more examples.
Per bug #16991 from Federico Caselli.
Discussion: https://postgr.es/m/16991-bcaeaafa17e0a723@postgresql.org
Before now, looking up "multirange" in the index only led to the
multirange() function. To make this more useful, also add an entry
pointing to the range types section.
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
Makes partition descriptor acquisition faster during the transient
period in which a partition is in the process of being detached.
This also adds the restriction that only one partition can be in
pending-detach state for a partitioned table.
While at it, return find_inheritance_children() API to what it was
before 71f4c8c6f7, and create a separate
find_inheritance_children_extended() that returns detailed info about
detached partitions.
(This incidentally fixes a bug in 8aba932251 whereby a memory context
holding a transient partdesc is reparented to a NULL PortalContext,
leading to permanent leak of that memory. The fix is to no longer rely
on reparenting contexts to PortalContext. Reported by Amit Langote.)
Per gripe from Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFgpP1LxJZOBYGt9rpvTjXXkg5qG2+Xch2Z1Q7KrqZR1A@mail.gmail.com
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
This will install amcheck in the database if not present. The default
schema is for the extension is pg_catalog, but this can be overridden by
providing a value for the option.
Mark Dilger, slightly editorialized by me.
(rather divergent)
Discussion: https://postgr.es/m/bdc0f7c2-09e3-ee57-8471-569dfb509234@dunslane.net
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
Tom Lane
Michael Paquier
Bruce Momjian
Magnus Hagander
Daniel Gustafsson
Amit Kapila
Alvaro Herrera
Heikki Linnakangas
Thomas Munro
Peter Geoghegan
Peter Eisentraut
Etsuro Fujita
Stephen Frost
David Rowley
John Naylor
Fujii Masao
Alexander Korotkov
Andrew Dunstan
Noah Misch
Tomas Vondra
Robert Haas