The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
After commit b0bea38705, syslogger prints 63 warnings about failing to
close a listen socket at postmaster startup. That's because the
syslogger process forks before the ListenSockets array is initialized,
so ClosePostmasterPorts() calls "close(0)" 64 times. The first call
succeeds, because fd 0 is stdin.
This has been like this since commit 9a86f03b4e in version 13, which
moved the SysLogger_Start() call to before initializing ListenSockets.
We just didn't notice until commit b0bea38705 added the LOG message.
Reported by Michael Paquier and Jeff Janes.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZOvvuQe0rdj2slA9%40paquier.xyz
Discussion: https://www.postgresql.org/message-id/ZO0fgDwVw2SUJiZx@paquier.xyz#482670177eb4eaf4c9f03c1eed963e5f
Backpatch-through: 13
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
Commit 1021bd6a89 excluded autovacuum workers from cost-limit balance
calculations when per-relation options were set. The code checks for
limit and cost_delay being greater than zero, but since cost_delay can
be set to -1 the test needs to check for greater than or zero.
Backpatch to all supported branches since 1021bd6a89 was backpatched
all the way at the time.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAD21AoBS7o6Ljt_vfqPQPf67AhzKu3fR0iqk8B=vVYczMugKMQ@mail.gmail.com
Backpatch-through: v11 (all supported branches)
Further to commit 6a9229da, checking for NULL is now redundant. An "out
of memory" error would have been thrown already by palloc() and treated
as FATAL, so we can delete a few more lines.
Back-patch to all releases, like those other commits.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/4040668.1679013388%40sss.pgh.pa.us
A comment was left behind claiming that we needed to use malloc() rather
than palloc() because the corresponding free would run in another
thread, but that's not true anymore. Remove that comment. And, with
the reason being gone, we might as well actually use palloc().
Back-patch to supported releases, like d41a178b.
Discussion: https://postgr.es/m/CA%2BhUKG%2BpdM9v3Jv4tc2BFx2jh_daY3uzUyAGBhtDkotEQDNPYw%40mail.gmail.com
Our waitpid() emulation didn't prevent a PID from being recycled by the
OS before the call to waitpid(). The postmaster could finish up
tracking more than one child process with the same PID, and confuse
them.
Fix, by moving the guts of pgwin32_deadchild_callback() into waitpid(),
so that resources are released synchronously. The process and PID
continue to exist until we close the process handle, which only happens
once we're ready to adjust our book-keeping of running children.
This seems to explain a couple of failures on CI. It had never been
reported before, despite the code being as old as the Windows port.
Perhaps Windows started recycling PIDs more rapidly, or perhaps timing
changes due to commit 7389aad6 made it more likely to break.
Thanks to Alexander Lakhin for analysis and Andres Freund for tracking
down the root cause.
Back-patch to all supported branches.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230208012852.bvkn2am4h4iqjogq%40awork3.anarazel.de
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
get_database_list() failed to restore the caller's memory context,
instead leaving current context set to TopMemoryContext which is
how CommitTransactionCommand() leaves it. The callers both think
they are using short-lived contexts, for the express purpose of
not having to worry about cleaning up individual allocations.
The net effect therefore is that supposedly short-lived allocations
could accumulate indefinitely in the launcher's TopMemoryContext.
Although this has been broken for a long time, it seems we didn't
have any obvious memory leak here until v15's rearrangement of the
stats logic. I (tgl) am not entirely convinced that there's no
other leak at all, though, and we're surely at risk of adding one
in future back-patched fixes. So back-patch to all supported
branches, even though this may be only a latent bug in pre-v15.
Reid Thompson
Discussion: https://postgr.es/m/972a4e12b68b0f96db514777a150ceef7dcd2e0f.camel@crunchydata.com
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
Previously when pg_log_backend_memory_contexts() sent the request to
the autovacuum launcher, it could take more than several seconds to
log its memory contexts. Because the function (HandleAutoVacLauncherInterrupts)
to process any new interrupts that autovacuum launcher received
didn't handle the request for logging of memory contexts. This commit changes
the function so that it handles the request, to make autovacuum launcher
more responsitve to pg_log_backend_memory_contexts().
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Koyu Tanigawa
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/0aae3e074face409b35153451be5cc11@oss.nttdata.com
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
In the long-going saga for analyze on partitioned tables, one thing I
missed while reverting 0827e8af70 is the maintenance of analyze count
and last analyze time for partitioned tables. This is a mostly trivial
change that enables users assess the need for invoking manual ANALYZE on
partitioned tables.
This patch, posted by Justin and modified a bit by me (Álvaro), can be
mostly traced back to Hosoya-san, though any problems introduced with
the scissors are mine.
Backpatch to 14, in line with 6f8127b739.
Co-authored-by: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210816222810.GE10479@telsasoft.com
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
Emit a LOG message when the postmaster stops because of a failure in
the startup process. There already is a similar message if we exit
for that reason during PM_STARTUP phase, so it seems inconsistent
that there was none if the startup process fails later on.
Also emit a LOG message when the postmaster stops after a crash
because restart_after_crash is disabled. This seems potentially
helpful in case DBAs (or developers) forget that that's set.
Also, it was the only remaining place where the postmaster would
do an abnormal exit without any comment as to why.
In passing, remove an unreachable call of ExitPostmaster(0).
Discussion: https://postgr.es/m/194914.1621641288@sss.pgh.pa.us
1) Previously there were both pgstat_send_wal() and pgstat_report_wal()
in order to send WAL activity to the stats collector. With the former being
used by wal writer, the latter by most other processes. They were a bit
redundant and so this commit merges them into pgstat_send_wal() to
simplify the code.
2) Previously WAL global statistics counters were calculated and then
compared with zero-filled buffer in order to determine whether any WAL
activity has happened since the last submission. These calculation and
comparison were not cheap. This was regularly exercised even in read-only
workloads. This commit fixes the issue by making some WAL activity
counters directly be checked to determine if there's WAL activity stats
to send.
3) Previously pgstat_report_stat() did not check if there's WAL activity
stats to send as part of the "Don't expend a clock check if nothing to do"
check at the top. It's probably rare to have pending WAL stats without
also passing one of the other conditions, but for safely this commit
changes pgstat_report_stats() so that it checks also some WAL activity
counters at the top.
This commit also adds the comments about the design of WAL stats.
Reported-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi, Andres Freund, Fujii Masao
Discussion: https://postgr.es/m/20210324232224.vrfiij2rxxwqqjjb@alap3.anarazel.de
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
ForgetBackgroundWorker lacked any memory barrier at all, while
BackgroundWorkerStateChange had one but unaccountably did
additional manipulation of the slot after the barrier. AFAICS,
the rule must be that the barrier is immediately before setting
or clearing slot->in_use.
It looks like back in 9.6 when ForgetBackgroundWorker was first
written, there might have been some case for not needing a
barrier there, but I'm not very convinced of that --- the fact
that the load of bgw_notify_pid is in the caller doesn't seem
to guarantee no memory ordering problem. So patch 9.6 too.
It's likely that this doesn't fix any observable bug on Intel
hardware, but machines with weaker memory ordering rules could
have problems here.
Discussion: https://postgr.es/m/4046084.1620244003@sss.pgh.pa.us
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Add a few words of comment to explain why SIGURG doesn't follow the
dummy_handler pattern used for SIGUSR2, since that might otherwise
appear to be a bug.
Discussion: https://postgr.es/m/4006115.1618577212%40sss.pgh.pa.us
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
When commit 0827e8af70 added auto-analyze support for partitioned
tables, it included code to obtain reltuples for the partitioned table
as a number of catalog accesses to read pg_class.reltuples for each
partition. That's not only very inefficient, but also problematic
because autovacuum doesn't hold any locks on any of those tables -- and
doesn't want to. Replace that code with a read of pg_class.reltuples
for the partitioned table, and make sure ANALYZE and TRUNCATE properly
maintain that value.
I found no code that would be affected by the change of relpages from
zero to non-zero for partitioned tables, and no other code that should
be maintaining it, but if there is, hopefully it'll be an easy fix.
Per buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/1823909.1617862590@sss.pgh.pa.us
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously, autovacuum would completely ignore partitioned tables, which
is not good regarding analyze -- failing to analyze those tables means
poor plans may be chosen. Make autovacuum aware of those tables by
propagating "changes since analyze" counts from the leaf partitions up
the partitioning hierarchy.
This also introduces necessary reloptions support for partitioned tables
(autovacuum_enabled, autovacuum_analyze_scale_factor,
autovacuum_analyze_threshold). It's unclear how best to document this
aspect.
Author: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAKkQ508_PwVgwJyBY=0Lmkz90j8CmWNPUxgHvCUwGhMrouz6UA@mail.gmail.com
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b92.
This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.
Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.
As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.
To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.
Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Previously when an archive recovery or a standby was starting and
reached the consistent recovery state but hot_standby was configured
to off, the error message when a client connectted was "the database
system is starting up", which was needless confusing and not really
all that accurate either.
This commit improves the connection denied error message during
recovery, as follows, so that the users immediately know that their
servers are configured to deny those connections.
- If hot_standby is disabled, the error message "the database system
is not accepting connections" and the detail message "Hot standby
mode is disabled." are output when clients connect while an archive
recovery or a standby is running.
- If hot_standby is enabled, the error message "the database system
is not yet accepting connections" and the detail message
"Consistent recovery state has not been yet reached." are output
when clients connect until the consistent recovery state is reached
and postmaster starts accepting read only connections.
This commit doesn't change the connection denied error message of
"the database system is starting up" during normal server startup and
crash recovery. Because it's still suitable for those situations.
Author: James Coleman
Reviewed-by: Alvaro Herrera, Andres Freund, David Zhang, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAAaqYe8h5ES_B=F_zDT+Nj9XU7YEwNhKhHA2RE4CFhAQ93hfig@mail.gmail.com
Nathan Bossart
Heikki Linnakangas
Andres Freund
Daniel Gustafsson
Thomas Munro
Noah Misch
Tom Lane
Fujii Masao
Magnus Hagander
Alvaro Herrera
Michael Paquier
Peter Eisentraut
Peter Geoghegan
Amit Kapila
Etsuro Fujita