This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
The comments atop of this function describes behaviour in case of a
transactional WAL message only, but it accepts both transactional and
non-transactional WAL messages. Update the comments to describe
behaviour in case of non-transactional WAL message as well.
Ashutosh Bapat, rephrased by Amit Kapila
Discussion: https://postgr.es/m/CAGEoWWTTzNzHOi8bj0wfAo1siGi-YEh6wqH1oaz4DrkTJ6HbTQ@mail.gmail.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
We start recording changes in ReorderBufferTXN even before we reach
SNAPBUILD_CONSISTENT state so that if the commit is encountered after
reaching that we should be able to send the changes of the entire transaction.
Now, while recording changes if the reorder buffer memory has exceeded
logical_decoding_work_mem then we can start streaming if it is allowed and
we haven't yet streamed that data. However, we must not allow streaming to
start unless the snapshot has reached SNAPBUILD_CONSISTENT state.
In passing, improve the comments atop ReorderBufferResetTXN to mention the
case when we need to continue streaming after getting an error.
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1KoOH0byboyYY40NBcC7Fe812trwTa+WY3jQF7WQWZbQg@mail.gmail.com
Tablesync worker runs under a single transaction but in streaming mode, we
were committing the transaction on stream_stop, stream_abort, and
stream_commit. We need to avoid committing the transaction in a streaming
mode in tablesync worker.
In passing move the call to process_syncing_tables in
apply_handle_stream_commit after clean up of stream files. This will
allow clean up of files to happen before the exit of tablesync worker
which would otherwise be handled by one of the proc exit routines.
Author: Dilip Kumar
Reviewed-by: Amit Kapila and Peter Smith
Tested-by: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pt4PyKQCwqzQ=EFF=bpKKJD7XKt_S23F6L20ayQNxg77A@mail.gmail.com
Reverts 27838981be (some comments are kept). Per discussion, it does
not seem safe to relax the lock level used for this; in order for it to
be safe, there would have to be memory barriers between the point we set
the flag and the point we set the trasaction Xid, which perhaps would
not be so bad; but there would also have to be barriers at the readers'
side, which from a performance perspective might be bad.
Now maybe this analysis is wrong and it *is* safe for some reason, but
proof of that is not trivial.
Discussion: https://postgr.es/m/20201118190928.vnztes7c2sldu43a@alap3.anarazel.de
Copy.c has grown really large. Split it into more manageable parts:
- copy.c now contains only a few functions that are common to COPY FROM
and COPY TO.
- copyto.c contains code for COPY TO.
- copyfrom.c contains code for initializing COPY FROM, and inserting the
tuples to the correct table.
- copyfromparse.c contains code for reading from the client/file/program,
and parsing the input text/CSV/binary format into tuples.
All of these parts are fairly complicated, and fairly independent of each
other. There is a patch being discussed to implement parallel COPY FROM,
which will add a lot of new code to the COPY FROM path, and another patch
which would allow INSERTs to use the same multi-insert machinery as COPY
FROM, both of which will require refactoring that code. With those two
patches, there's going to be a lot of code churn in copy.c anyway, so now
seems like a good time to do this refactoring.
The CopyStateData struct is also split. All the formatting options, like
FORMAT, QUOTE, ESCAPE, are put in a new CopyFormatOption struct, which
is used by both COPY FROM and TO. Other state data are kept in separate
CopyFromStateData and CopyToStateData structs.
Reviewed-by: Soumyadeep Chakraborty, Erik Rijkers, Vignesh C, Andres Freund
Discussion: https://www.postgresql.org/message-id/8e15b560-f387-7acc-ac90-763986617bfb%40iki.fi
We don't actually need a lock to set PGPROC->statusFlags itself; what we
do need is a shared lock on either XidGenLock or ProcArrayLock in order to
ensure MyProc->pgxactoff keeps still while we modify the mirror array in
ProcGlobal->statusFlags. Some places were using an exclusive lock for
that, which is excessive. Relax those to use shared lock only.
procarray.c has a couple of places with somewhat brittle assumptions
about PGPROC changes: ProcArrayEndTransaction uses only shared lock, so
it's permissible to change MyProc only. On the other hand,
ProcArrayEndTransactionInternal also changes other procs, so it must
hold exclusive lock. Add asserts to ensure those assumptions continue
to hold.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201117155501.GA13805@alvherre.pgsql
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Logical replication protocol uses a single byte character to identify a
message type in logical replication protocol. The code uses string
literals for the same. Use Enum so that
1. All the string literals used can be found at a single place. This
makes it easy to add more types without the risk of conflicts.
2. It's easy to locate the code handling a given message type.
3. When used with switch statements, it is easy to identify the missing
cases using -Wswitch.
Author: Ashutosh Bapat
Reviewed-by: Kyotaro Horiguchi, Andres Freund, Peter Smith and Amit Kapila
Discussion: https://postgr.es/m/CAExHW5uPzQ7L0oAd_ENyvaiYMOPgkrAoJpE+ZY5-obdcVT6NPg@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
It's unsafe to do this at parse time because addition of generated
columns to a table would not invalidate stored rules containing
UPDATEs on the table ... but there might now be dependent generated
columns that were not there when the rule was made. This also fixes
an oversight that rewriteTargetView failed to update extraUpdatedCols
when transforming an UPDATE on an updatable view. (Since the new
calculation is downstream of that, rewriteTargetView doesn't actually
need to do anything; but before, there was a demonstrable bug there.)
In v13 and HEAD, this leads to easily-visible bugs because (since
commit c6679e4fc) we won't recalculate generated columns that aren't
listed in extraUpdatedCols. In v12 this bitmap is mostly just used
for trigger-firing decisions, so you'd only notice a problem if a
trigger cared whether a generated column had been updated.
I'd complained about this back in May, but then forgot about it
until bug #16671 from Michael Paul Killian revived the issue.
Back-patch to v12 where this field was introduced. If existing
stored rules contain any extraUpdatedCols values, they'll be
ignored because the rewriter will overwrite them, so the bug will
be fixed even for existing rules. (But note that if someone were
to update to 13.1 or 12.5, store some rules with UPDATEs on tables
having generated columns, and then downgrade to a prior minor version,
they might observe issues similar to what this patch fixes. That
seems unlikely enough to not be worth going to a lot of effort to fix.)
Discussion: https://postgr.es/m/10206.1588964727@sss.pgh.pa.us
Discussion: https://postgr.es/m/16671-2fa55851859fb166@postgresql.org
Most importantly, remove optimization in LogicalRepSyncTableStart that
skips the normal walrcv_startstreaming/endstreaming dance. The
optimization is not critically important for production uses anyway,
since it only fires in cases with no activity, and saves an
uninteresting amount of work even then. Critically, it obscures bugs by
hiding the interesting code path from test cases.
Also: in GetSubscriptionRelState, remove pointless relation open; access
pg_subscription_rel->srsubstate with GETSTRUCT as is typical rather than
SysCacheGetAttr; remove unused 'missing_ok' argument.
In wait_for_relation_state_change, use explicit catalog snapshot
invalidation rather than obscurely (and expensively) through
GetLatestSnapshot.
In various places: sprinkle comments more liberally and rewrite a number
of them. Other cosmetic code improvements.
No backpatch, since no bug is being fixed here.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/20201010190637.GA5774@alvherre.pgsql
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
during logical decoding.
Prior to commit c55040ccd0 we have no way of knowing the invalidations
before commit. So, while decoding we use to execute all the invalidations
at each command end as we had no way of knowing which invalidations
happened before that command. Due to this, transactions involving large
amounts of DDLs use to take more time and also lead to high CPU usage. But
now we know specific invalidations at each command end so we execute only
required invalidations.
It has been observed that decoding of a transaction containing truncation
of a table with 1000 partitions would be finished in 1s whereas before
this patch it used to take 4-5 minutes.
Author: Dilip Kumar
Reviewed-by: Amit Kapila and Keisuke Kuroda
Discussion: https://postgr.es/m/CANDwggKYveEtXjXjqHA6RL3AKSHMsQyfRY6bK+NqhAWJyw8psQ@mail.gmail.com
I removed the duplicate command tags for START_REPLICATION inadvertently
in commit 07082b08cc, but the replication protocol requires them. The
fact that the replication protocol was broken was not noticed because
all our test cases use an optimized code path that exits early, failing
to verify that the behavior is correct for non-optimized cases. Put
them back.
Also document this protocol quirk.
Add a test case that shows the failure. It might still succeed even
without the patch when run on a fast enough server, but it suffices to
show the bug in enough cases that it would be noticed in buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Henry Hinze <henry.hinze@gmail.com>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/16643-eaadeb2a1a58d28c@postgresql.org
Maintaining 'es_result_relation_info' correctly at all times has become
cumbersome, especially with partitioning where each partition gets its
own result relation info. Having to set and reset it across arbitrary
operations has caused bugs in the past.
This changes all the places that used 'es_result_relation_info', to
receive the currently active ResultRelInfo via function parameters
instead.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Instead of allocating all the ResultRelInfos upfront in one big array,
allocate them in ExecInitModifyTable(). es_result_relations is now an
array of ResultRelInfo pointers, rather than an array of structs, and it
is indexed by the RT index.
This simplifies things: we get rid of the separate concept of a "result
rel index", and don't need to set it in setrefs.c anymore. This also
allows follow-up optimizations (not included in this commit yet) to skip
initializing ResultRelInfos for target relations that were not needed at
runtime, and removal of the es_result_relation_info pointer.
The EState arrays of regular result rels and root result rels are merged
into one array. Similarly, the resultRelations and rootResultRelations
lists in PlannedStmt are merged into one. It's not actually clear to me
why they were kept separate in the first place, but now that the
es_result_relations array is indexed by RT index, it certainly seems
pointless.
The PlannedStmt->resultRelations list is now only needed for
ExecRelationIsTargetRelation(). One visible effect of this change is that
ExecRelationIsTargetRelation() will now return 'true' also for the
partition root, if a partitioned table is updated. That seems like a good
thing, although the function isn't used in core code, and I don't see any
reason for an FDW to call it on a partition root.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
In logical replication when a subscriber is missing some columns, it
currently emits an error message that says "some" columns are missing, but
it doesn't specify the missing column names. Change that to display
missing column names which makes an error to be more informative to the
user.
We have decided not to backpatch this commit as this is a minor usability
improvement and no user has reported this.
Reported-by: Bharath Rupireddy
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CALj2ACVkW-EXH_4pmBK8tNeHRz5ksUC4WddGactuCjPiBch-cg@mail.gmail.com
Commit 464824323e changed the logical replication protocol to allow the
streaming of in-progress transactions and used the new version of protocol
irrespective of the server version. Use the appropriate version of the
protocol based on the server version.
Reported-by: Ashutosh Sharma
Author: Dilip Kumar
Reviewed-by: Ashutosh Sharma and Amit Kapila
Discussion: https://postgr.es/m/CAE9k0P=9OpXcNrcU5Gsvd5MZ8GFpiN833vNHzX6Uc=8+h1ft1Q@mail.gmail.com
Since there is only one place that actually needs the partition check
expression, namely ExecPartitionCheck, it's better to fetch it from
the relcache there. In this way we will never fetch it at all if
the query never has use for it, and we still fetch it just once when
we do need it.
The reason for taking an interest in this is that if the relcache
doesn't already have the check expression cached, fetching it
requires obtaining AccessShareLock on the partition root. That
means that operations that look like they should only touch the
partition itself will also take a lock on the root. In particular
we observed that TRUNCATE on a partition may take a lock on the
partition's root, contributing to a deadlock situation in parallel
pg_restore.
As written, this patch does have a small cost, which is that we
are microscopically reducing efficiency for the case where a partition
has an empty check expression. ExecPartitionCheck will be called,
and will go through the motions of setting up and checking an empty
qual, where before it would not have been called at all. We could
avoid that by adding a separate boolean flag to track whether there
is a partition expression to test. However, this case only arises
for a default partition with no siblings, which surely is not an
interesting case in practice. Hence adding complexity for it
does not seem like a good trade-off.
Amit Langote, per a suggestion by me
Discussion: https://postgr.es/m/VI1PR03MB31670CA1BD9625C3A8C5DD05EB230@VI1PR03MB3167.eurprd03.prod.outlook.com
The code recorded cache invalidation events by zeroing the "localreloid"
field of affected cache entries. However, it's possible for an inval
event to occur even while we have the entry open and locked. So an
ill-timed inval could result in "cache lookup failed for relation 0"
errors, if the worker's code tried to use the cleared field. We can
fix that by creating a separate bool field to record whether the entry
needs to be revalidated. (In the back branches, cram the bool into
what had been padding space, to avoid an ABI break in the somewhat
unlikely event that any extension is looking at this struct.)
Also, rearrange the logic in logicalrep_rel_open so that it
does the right thing in cases where table_open would fail.
We should retry the lookup by name in that case, but we didn't.
The real-world impact of this is probably small. In the first place,
the error conditions are very low probability, and in the second place,
the worker would just exit and get restarted. We only noticed because
in a CLOBBER_CACHE_ALWAYS build, the failure can occur repeatedly,
preventing the worker from making progress. Nonetheless, it's clearly
a bug, and it impedes a useful type of testing; so back-patch to v10
where this code was introduced.
Discussion: https://postgr.es/m/1032727.1600096803@sss.pgh.pa.us
Commit 3f60f690f only partially fixed the broken-status-tracking
issue in LogicalRepApplyLoop: we need ping_sent to have the same
lifetime as last_recv_timestamp. The effects are much less serious
than what that commit fixed, though. AFAICS this would just lead to
extra ping requests being sent, once per second until the sender
responds. Still, it's a bug, so backpatch to v10 as before.
Discussion: https://postgr.es/m/959627.1599248476@sss.pgh.pa.us
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Previous commits made it faster/more scalable to compute snapshots. But not
building a snapshot is still faster. Now that GetSnapshotData() does not
maintain RecentGlobal* anymore, that is actually not too hard:
This commit introduces xactCompletionCount, which tracks the number of
top-level transactions with xids (i.e. which may have modified the database)
that completed in some form since the start of the server.
We can avoid rebuilding the snapshot's contents whenever the current
xactCompletionCount is the same as it was when the snapshot was
originally built. Currently this check happens while holding
ProcArrayLock. While it's likely possible to perform the check without
acquiring ProcArrayLock, it seems better to do that separately /
later, some careful analysis is required. Even with the lock this is a
significant win on its own.
On a smaller two socket machine this gains another ~1.03x, on a larger
machine the effect is roughly double (earlier patch version tested
though). If we were able to safely avoid the lock there'd be another
significant gain on top of that.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c9, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
This is like CVE-2018-1058 commit
582edc369c. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
Testing that an unsigned variable is >= 0 is pretty pointless,
as noted by Coverity and numerous buildfarm members.
In passing, add comment about new uses of "volatile" --- Coverity
doesn't much like that either, but it seems probably necessary.
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This adds seven methods to the output plugin API, adding support for
streaming changes of large in-progress transactions.
* stream_start
* stream_stop
* stream_abort
* stream_commit
* stream_change
* stream_message
* stream_truncate
Most of this is a simple extension of the existing methods, with
the semantic difference that the transaction (or subtransaction)
is incomplete and may be aborted later (which is something the
regular API does not really need to deal with).
This also extends the 'test_decoding' plugin, implementing these
new stream methods.
The stream_start/start_stop are used to demarcate a chunk of changes
streamed for a particular toplevel transaction.
This commit simply adds these new APIs and the upcoming patch to "allow
the streaming mode in ReorderBuffer" will use these APIs.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Rather than always insisting on an exact match of the type OID in the
data to the element type or column type we expect, complain only when
both OIDs fall within the manually-assigned range. This acknowledges
the reality that user-defined types don't have stable OIDs, while
still preserving some of the mistake-detection value of the old test.
(It's not entirely clear whether to error if one OID is manually
assigned and the other isn't. But perhaps that case could arise in
cross-version cases where a former extension type has been imported
into core, so I let it pass.)
This change allows us to remove the prohibition on binary transfer
of user-defined arrays and composites in the recently-landed support
for binary logical replication (commit 9de77b545). We can just
unconditionally drop that check, since if the client has asked for
binary transfer it must be >= v14 and must have this change.
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
Commit b9c130a1f failed to apply the publisher-to-subscriber column
mapping while checking which columns were updated. Perhaps less
significantly, it didn't exclude dropped columns either. This could
result in an incorrect updated-columns bitmap and thus wrong decisions
about whether to fire column-specific triggers on the subscriber while
applying updates. In HEAD (since commit 9de77b545), it could also
result in accesses off the end of the colstatus array, as detected by
buildfarm member skink. Fix the logic, and adjust 003_constraints.pl
so that the problem is exposed in unpatched code.
In HEAD, also add some assertions to check that we don't access off
the ends of these newly variable-sized arrays.
Back-patch to v10, as b9c130a1f was.
Discussion: https://postgr.es/m/CAH2-Wz=79hKQ4++c5A060RYbjTHgiYTHz=fw6mptCtgghH2gJA@mail.gmail.com
The logical decoding infrastructure needs to know which top-level
transaction the subxact belongs to, in order to decode all the
changes. Until now that might be delayed until commit, due to the
caching (GPROC_MAX_CACHED_SUBXIDS), preventing features requiring
incremental decoding.
So we also write the assignment info into WAL immediately, as part
of the next WAL record (to minimize overhead) only when wal_level=logical.
We can not remove the existing XLOG_XACT_ASSIGNMENT WAL as that is
required for avoiding overflow in the hot standby snapshot.
Bump XLOG_PAGE_MAGIC, since this introduces XLR_BLOCK_ID_TOPLEVEL_XID.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This patch adds a "binary" option to CREATE/ALTER SUBSCRIPTION.
When that's set, the publisher will send data using the data type's
typsend function if any, rather than typoutput. This is generally
faster, if slightly less robust.
As committed, we won't try to transfer user-defined array or composite
types in binary, for fear that type OIDs won't match at the subscriber.
This might be changed later, but it seems like fit material for a
follow-on patch.
Dave Cramer, reviewed by Daniel Gustafsson, Petr Jelinek, and others;
adjusted some by me
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
Commit 1e53fe0e70 has unified the usage of the config-file reload flag by
using the same signal handler function for the SIGHUP signal at many places
in the code. By mistake, it used the wrong SIGNAL in apply launcher
process for the SIGHUP signal handler function.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CALj2ACVzHCRnS20bOiEHaLtP5PVBENZQn4khdsSJQgOv_GM-LA@mail.gmail.com
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
Commit cec2edfa78 introduced logical_decoding_work_mem to limit
ReorderBuffer memory usage. We spill the changes once the memory occupied
by changes exceeds logical_decoding_work_mem. There was an assumption
in the code that by evicting the largest (sub)transaction we will come
under the memory limit as the selected transaction will be at least as
large as the most recent change (which caused us to go over the memory
limit). However, that is not true because a user can reduce the
logical_decoding_work_mem to a smaller value before the most recent
change.
We fix it by allowing to evict the transactions until we reach under the
memory limit.
Reported-by: Fujii Masao
Author: Amit Kapila
Reviewed-by: Fujii Masao
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/2b7ba291-22e0-a187-d167-9e5309a3458d@oss.nttdata.com
The previous coding zeroed out offsetof(ReplicationStateCtl, states)
more bytes than it was entitled to, as a consequence of starting the
zeroing from the wrong pointer (or, if you prefer, using the wrong
calculation of how much to zero).
It's unsurprising that this has not caused any reported problems,
since it can be expected that the newly-allocated block is at the end
of what we've used in shared memory, and we always make the shmem
block substantially bigger than minimally necessary. Nonetheless,
this is wrong and it could bite us someday; plus it's a dangerous
model for somebody to copy.
This dates back to the introduction of this code (commit 5aa235042),
so back-patch to all supported branches.
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There is little point in using the LWLockRegisterTranche mechanism for
built-in tranche names. It wastes cycles, it creates opportunities for
bugs (since failing to register a tranche name is a very hard-to-detect
problem), and the lack of any centralized list of names encourages
sloppy nonconformity in name choices. Moreover, since we have a
centralized list of the tranches anyway in enum BuiltinTrancheIds, we're
certainly not buying any flexibility in return for these disadvantages.
Hence, nuke all the backend-internal LWLockRegisterTranche calls,
and instead provide a const array of the builtin tranche names.
(I have in mind to change a bunch of these names shortly, but this
patch is just about getting them into one place.)
Discussion: https://postgr.es/m/9056.1589419765@sss.pgh.pa.us
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
Mainly, this adds support code in logical/worker.c for applying
replicated operations whose target is a partitioned table to its
relevant partitions.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
This moves the main operations of apply_handle_{insert|update|delete},
that of inserting, updating, deleting a tuple into/from a given
relation, into corresponding
apply_handle_{insert|update|delete}_internal functions. This allows
performing those operations on relations that are not directly the
targets of replication, which is something a later patch will use for
targeting partitioned tables.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
This by itself doesn't change any functionality but prepares the way
for having relations other than base tables in publications.
Make arrangements for COPY handling the initial table sync. For
non-tables we have to use COPY (SELECT ...) instead of directly
copying from the table, but then we have to take care to omit
generated columns from the column list.
Also, remove a hardcoded reference to relkind = 'r' and rely on the
publisher to send only what it can actually publish, which will be
correct even in future cross-version scenarios.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
It devolved into a content-less wrapper over read_local_xlog_page, with
nothing to add, plus it's easily confused with walsender's
logical_read_xlog_page. There doesn't seem to be any reason for it to
stay.
src/include/replication/logicalfuncs.h becomes empty, so remove it too.
The prototypes it initially had were absorbed by generated fmgrprotos.h.
Discussion: https://postgr.es/m/20191115214102.GA15616@alvherre.pgsql
Commit 9f06d79ef831's replication slot copying failed to
properly reserve the WAL that the slot is expecting to see
during DecodingContextFindStartpoint (to set the confirmed_flush
LSN), so concurrent activity could remove that WAL and cause the
copy process to error out. But it doesn't actually *need* that
WAL anyway: instead of running decode to find confirmed_flush, it
can be copied from the source slot. Fix this by rearranging things
to avoid DecodingContextFindStartpoint() (leaving the target slot's
confirmed_flush_lsn to invalid), and set that up afterwards by copying
from the target slot's value.
Also ensure the source slot's confirmed_flush_lsn is valid.
Reported-by: Arseny Sher
Author: Masahiko Sawada, Arseny Sher
Discussion: https://postgr.es/m/871rr3ohbo.fsf@ars-thinkpad
When a partitioned table is added to a publication, changes of all of
its partitions (current or future) are published via that publication.
This change only affects which tables a publication considers as its
members. The receiving side still sees the data coming from the
individual leaf partitions. So existing restrictions that partition
hierarchies can only be replicated one-to-one are not changed by this.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
The extraUpdatedCols field of the target RTE records which generated
columns are affected by an update. This is used in a variety of
places, including per-column triggers and foreign data wrappers. When
an update was initiated by a logical replication subscription, this
field was not filled in, so such an update would not affect generated
columns in a way that is consistent with normal updates. To fix,
factor out some code from analyze.c to fill in extraUpdatedCols in the
logical replication worker as well.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b05e781a-fa16-6b52-6738-761181204567@2ndquadrant.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
... specifically, set it incrementally as each individual change is
spilled down to disk. This way, it is set correctly when the
transaction disappears without trace, ie. without leaving an XACT_ABORT
wal record. (This happens when the server crashes midway through a
transaction.)
Failing to have final_lsn prevents ReorderBufferRestoreCleanup() from
working, since it needs the final_lsn in order to know the endpoint of
its iteration through spilled files.
Commit df9f682c7b already tried to fix the problem, but it didn't set
the final_lsn in all cases. Revert that, since it's no longer needed.
Author: Vignesh C
Reviewed-by: Amit Kapila, Dilip Kumar
Discussion: https://postgr.es/m/CALDaNm2CLk+K9JDwjYST0sPbGg5AQdvhUt0jbKyX_HdAE0jk3A@mail.gmail.com
On the publisher, it was assumed that an INSERT change cannot happen for
a relation with no replica identity. However this is true only for a
change that needs references to old rows, aka UPDATE or DELETE, so
trying to use logical replication with a relation that has no replica
identity led to an assertion failure in the publisher when issuing an
INSERT. This commit removes the incorrect assertion, and adds more
regression tests to provide coverage for relations without replica
identity.
Reported-by: Neha Sharma
Author: Dilip Kumar, Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CANiYTQsL1Hb8_Km08qd32svrqNumXLJeoGo014O7VZymgOhZEA@mail.gmail.com
Backpatch-through: 10
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
Currently while decoding changes, if the number of changes exceeds a
certain threshold, we spill those to disk. And this happens for each
(sub)transaction. Now, while reading all these files, we don't close them
until we read all the files. While reading these files, if the number of
such files exceeds the maximum number of file descriptors, the operation
errors out.
Use PathNameOpenFile interface to open these files as that internally has
the mechanism to release kernel FDs as needed to get us under the
max_safe_fds limit.
Reported-by: Amit Khandekar
Author: Amit Khandekar
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAJ3gD9c-sECEn79zXw4yBnBdOttacoE-6gAyP0oy60nfs_sabQ@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
Tuple conversion support in tupconvert.c is able to convert rowtypes
between two relations, inner and outer, which are logically equivalent
but have a different ordering or even dropped columns (used mainly for
inheritance tree and partitions). This makes use of attribute mappings,
which are simple arrays made of AttrNumber elements with a length
matching the number of attributes of the outer relation. The length of
the attribute mapping has been treated as completely independent of the
mapping itself until now, making it easy to pass down an incorrect
mapping length.
This commit refactors the code related to attribute mappings and moves
it into an independent facility called attmap.c, extracted from
tupconvert.c. This merges the attribute mapping with its length,
avoiding to try to guess what is the length of a mapping to use as this
is computed once, when the map is built.
This will avoid mistakes like what has been fixed in dc816e58, which has
used an incorrect mapping length by matching it with the number of
attributes of an inner relation (a child partition) instead of an outer
relation (a partitioned table).
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz
This patch allows building the local relmap cache for a subscribed
relation after processing pending invalidation messages and potential
relcache updates. Without this, the attributes in the local cache don't
tally with the updated relcache entry leading to invalid memory access.
Reported-by Jehan-Guillaume de Rorthais
Author: Jehan-Guillaume de Rorthais and Vignesh C
Reviewed-by: Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/20191025175929.7e90dbf5@firost
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
There seems to be no reason for every background process to have
its own flag indicating that a config-file reload is needed.
Instead, let's just use ConfigFilePending for that purpose
everywhere.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
slot_modify_cstrings seriously abused the TupleTableSlot API by relying
on a slot's underlying data to stay valid across ExecClearTuple. Since
this abuse was also quite undocumented, it's little surprise that the
case got broken during the v12 slot rewrites. As reported in bug #16129
from Ondřej Jirman, this could lead to crashes or data corruption when
a logical replication subscriber processes a row update. Problems would
only arise if the subscriber's table contained columns of pass-by-ref
types that were not being copied from the publisher.
Fix by explicitly copying the datum/isnull arrays from the source slot
that the old row was in already. This ends up being about the same
thing that happened pre-v12, but hopefully in a less opaque and
fragile way.
We might've caught the problem sooner if there were any test cases
dealing with updates involving non-replicated or dropped columns.
Now there are.
Back-patch to v10 where this code came in. Even though the failure
does not manifest before v12, IMO this code is too fragile to leave
as-is. In any case we certainly want the additional test coverage.
Patch by me; thanks to Tomas Vondra for initial investigation.
Discussion: https://postgr.es/m/16129-a0c0f48e71741e5f@postgresql.org
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication view to check
these stats.
Author: Tomas Vondra, with bug-fixes and minor changes by Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This happens when we add a replica identity column on a subscriber
that does not yet exist on the publisher, according to the mapping
maintained by the subscriber. Code that checks whether the target
relation on the subscriber is updatable would check the replica
identity attribute bitmap with a column number -1, which would result
in an error. To fix, skip such columns in the bitmap lookup and
consider the relation not updatable. The result is consistent with
the rule that the replica identity columns on the subscriber must be a
subset of those on the publisher, since if the column doesn't exist on
the publisher, the column set on the subscriber can't be a subset.
Reported-by: Tim Clarke <tim.clarke@minerva.info>
Analyzed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/a9139c29-7ddd-973b-aa7f-71fed9c38d75%40minerva.info
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The timestamp tracking the last moment a message is received in a
logical replication worker was initialized in each loop checking if a
message was received or not, causing wal_receiver_timeout to be ignored
in basically any logical replication deployments. This also broke the
ping sent to the server when reaching half of wal_receiver_timeout.
This simply moves the initialization of the timestamp out of the apply
loop to the beginning of LogicalRepApplyLoop().
Reported-by: Jehan-Guillaume De Rorthais
Author: Julien Rouhaud
Discussion: https://postgr.es/m/CAOBaU_ZHESFcWva8jLjtZdCLspMj7vqaB2k++rjHLY897ZxbYw@mail.gmail.com
Backpatch-through: 10
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
Most WAL records are ignored in early SnapBuild snapshot build phases.
But it's critical to process some of them, so that later messages have
the correct transaction state after the snapshot is completely built; in
particular, XLOG_XACT_ASSIGNMENT messages are critical in order for
sub-transactions to be correctly assigned to their parent transactions,
or at least one assert misbehaves, as reported by Ildar Musin.
Diagnosed-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAONYFtOv+Er1p3WAuwUsy1zsCFrSYvpHLhapC_fMD-zNaRWxYg@mail.gmail.com
Some of these are quite old, but that doesn't make them not bugs.
We'd rather report a failure via elog than SIGSEGV.
While at it, uniformly spell the error check as !RelationIsValid(rel)
rather than a bare rel == NULL test. The machine code is the same
but it seems better to be consistent.
Coverity complained about this today, not sure why, because the
mistake is in fact old.
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
In early development patches, "replication origins" were called "identifiers";
almost everything was renamed, but these references to the old terminology
went unnoticed.
Reported-by: Craig Ringer
As of now, logical decoding of a multi-insert has been scanning all
xl_multi_insert_tuple entries only if XLH_INSERT_CONTAINS_NEW_TUPLE was
getting set in the record. This is not an issue on HEAD as multi-insert
records are not used for system catalogs, but the logical decoding logic
includes all the code necessary to handle that properly, except that the
code missed to iterate correctly over all xl_multi_insert_tuple entries
when the flag is not set. Hence, when trying to use multi-insert for
system catalogs, an assertion would be triggered.
An upcoming patch is going to make use of multi-insert for system
catalogs, and this fixes the logic to make sure that all entries are
scanned correctly without softening the existing assertions.
Reported-by: Daniel Gustafsson
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CBFFD532-C033-49EB-9A5A-F67EAEE9EB0B@yesql.se
In the wake of commit 1cff1b95a, the obvious way to sort a List
is to apply qsort() directly to the array of ListCells. list_qsort
was building an intermediate array of pointers-to-ListCells, which
we no longer need, but getting rid of it forces an API change:
the comparator functions need to do one less level of indirection.
Since we're having to touch the callers anyway, let's do two additional
changes: sort the given list in-place rather than making a copy (as
none of the existing callers have any use for the copying behavior),
and rename list_qsort to list_sort. It was argued that the old name
exposes more about the implementation than it should, which I find
pretty questionable, but a better reason to rename it is to be sure
we get the attention of any external callers about the need to fix
their comparator functions.
While we're at it, change four existing callers of qsort() to use
list_sort instead; previously, they all had local reinventions
of list_qsort, ie build-an-array-from-a-List-and-qsort-it.
(There are some other places where changing to list_sort perhaps
would be worthwhile, but they're less obviously wins.)
Discussion: https://postgr.es/m/29361.1563220190@sss.pgh.pa.us
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have
on an existing installation.
This commit adds a simple enforcement mechanism for that rule: if the code
is compiled with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS defined, it
will emit a warning (not an error) whenever a database, role, tablespace,
subscription, or replication origin name is created that doesn't obey the
rule. Running one or more buildfarm members with that symbol defined
should be enough to catch new violations, at least in the regular
regression tests. Most TAP tests wouldn't notice such warnings, but
that's actually fine because TAP tests don't execute against an existing
server anyway.
Since it's already the case that running src/test/modules/ tests in
installcheck mode is deprecated, we can use that as a home for tests
that seem unsafe to run against an existing server, such as tests that
might have side-effects on existing roles. Document that (though this
commit doesn't in itself make it any less safe than before).
Update regress.sgml to define these restrictions more clearly, and
to clean up assorted lack-of-up-to-date-ness in its descriptions of
the available regression tests.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
Since we generate such names internally, it seems like a good idea
to have a policy of disallowing them for user use, as we do for many
other object types. Otherwise attempts to use them will randomly
fail due to collisions with internally-generated names.
Discussion: https://postgr.es/m/3606.1561747369@sss.pgh.pa.us
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Only hand-assigned type OIDs should be presumed to match across different
PG servers; those assigned during genbki.pl or during initdb are likely
to change due to addition or removal of unrelated objects.
This means that the cutoff should be FirstGenbkiObjectId (in HEAD)
or FirstBootstrapObjectId (before that), not FirstNormalObjectId.
Compare postgres_fdw's is_builtin() test.
It's likely that this error has no observable consequence in a
normally-functioning system, since ATM the only affected type OIDs are
system catalog rowtypes and information_schema types, which would not
typically be interesting for logical replication. But you could
probably break it if you tried hard, so back-patch.
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
Transient files and wait events get normally cleaned up when seeing an
exception (be it in the context of a transaction for a backend or
another process like the checkpointer), hence there is little point in
complicating error code paths to do this work. This shaves a bit of
code, and removes some extra handling with errno which needed to be
preserved during the cleanup steps done.
Reported-by: Masahiko Sawada
Author: Michael Paquier
Reviewed-by: Tom Lane, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDhHYVq5KkXfkaHhmjA-zJYj-e4teiRAJefvXuKJz1tKQ@mail.gmail.com
This allows the user to create duplicates of existing replication slots,
either logical or physical, and even changing properties such as whether
they are temporary or the output plugin used.
There are multiple uses for this, such as initializing multiple replicas
using the slot for one base backup; when doing investigation of logical
replication issues; and to select a different output plugins.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Andres Freund, Petr Jelinek
Discussion: https://postgr.es/m/CAD21AoAm7XX8y_tOPP6j4Nzzch12FvA1wPqiO690RCk+uYVstg@mail.gmail.com
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
Add a separate walreceiver API function walrcv_server_version() to get
the version of the remote server, instead of doing it as part of
walrcv_identify_system(). This allows the server version to be
available even for uses that don't call IDENTIFY_SYSTEM, and it seems
cleaner anyway.
This is for an upcoming patch, not currently used.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/20190115071359.GF1433@paquier.xyz
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
When building an initial slot snapshot, snapshots are marked with
historic MVCC snapshots as type with the marker field being set in
SnapBuildBuildSnapshot() but not overriden in SnapBuildInitialSnapshot().
Existing callers of SnapBuildBuildSnapshot() do not care about the type
of snapshot used, but extensions calling it actually may, as reported.
While on it, mark correctly the snapshot type when importing one. This
is cosmetic as the field is enforced to 0.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/23215.1527665193@localhost
Backpatch-through: 9.4
Ever since its birth, ReorderBufferBuildTupleCidHash() has contained an
assertion that a catalog tuple cannot change Cmax after acquiring one. But
that's wrong: if a subtransaction executes DDL that affects that catalog
tuple, and later aborts and another DDL affects the same tuple, it will
change Cmax. Relax the assertion to merely verify that the Cmax remains
valid and monotonically increasing, instead.
Add a test that tickles the relevant code.
Diagnosed by, and initial patch submitted by: Arseny Sher
Co-authored-by: Arseny Sher
Discussion: https://postgr.es/m/874l9p8hyw.fsf@ars-thinkpad
Amit Kapila
Bruce Momjian
Tom Lane
Noah Misch
Peter Eisentraut
Alvaro Herrera
Heikki Linnakangas
David Rowley
Michael Paquier
Andres Freund
Robert Haas
Thomas Munro