The problem is that we don't send keep-alive messages for a long time
while processing large transactions during logical replication where we
don't send any data of such transactions. This can happen when the table
modified in the transaction is not published or because all the changes
got filtered. We do try to send the keep_alive if necessary at the end of
the transaction (via WalSndWriteData()) but by that time the
subscriber-side can timeout and exit.
To fix this we try to send the keepalive message if required after
processing certain threshold of changes.
Reported-by: Fabrice Chapuis
Author: Wang wei and Amit Kapila
Reviewed By: Masahiko Sawada, Euler Taveira, Hou Zhijie, Hayato Kuroda
Backpatch-through: 10
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
Commit 19890a064e added the option to enable two_phase commits via
pg_create_logical_replication_slot but didn't extend the support of same
in replication protocol. However, by mistake, it added the two_phase
variable in CreateReplicationSlotCmd which is required only when we extend
the replication protocol.
Reported-by: Jeff Davis
Author: Ajin Cherian
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/64b9f783c6e125f18f88fbc0c0234e34e71d8639.camel@j-davis.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
This avoids the need to set up and tear down a fresh WaitEventSet every
time we need need to wait. We have to add an explicit exit on
postmaster exit (FeBeWaitSet isn't set up to do that automatically), so
move the code to do that into a new function to avoid repetition.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
Commit 709d003fbd refactored WAL-reading code, but accidentally caused
WalSndSegmentOpen() to fail to follow a timeline switch while reading from
a historic timeline. This issue caused a standby to fail to follow a primary
on a newer timeline when WAL archiving is enabled.
If there is a timeline switch within the segment, WalSndSegmentOpen() should
read from the WAL segment belonging to the new timeline. But previously
since it failed to follow a timeline switch, it tried to read the WAL segment
with old timeline. When WAL archiving is enabled, that WAL segment with
old timeline doesn't exist because it's renamed to .partial. This leads
a primary to have tried to read non-existent WAL segment, and which caused
replication to faill with the error "ERROR: requested WAL segment ... has
already been removed".
This commit fixes WalSndSegmentOpen() so that it's able to follow a timeline
switch, to ensure that a standby is able to follow a primary on a newer
timeline even when WAL archiving is enabled.
This commit also adds the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
Back-patch to v13 where the bug was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, tweaked by Fujii Masao
Reviewed-by: Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/20201209.174314.282492377848029776.horikyota.ntt@gmail.com
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
This was marked as BYTEA, but is more like TEXT, which is how we already
pass the history timeline file name. Internally, we don't do any
encoding or bytea escape handling, but TEXT seems closest. This should
cause no behavioral change.
Reported-by: Brar Piening
Discussion: https://postgr.es/m/6a1b9cd9-17e3-df67-be55-86102af6bdf5@gmx.de
Backpatch-through: master
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
I removed the duplicate command tags for START_REPLICATION inadvertently
in commit 07082b08cc, but the replication protocol requires them. The
fact that the replication protocol was broken was not noticed because
all our test cases use an optimized code path that exits early, failing
to verify that the behavior is correct for non-optimized cases. Put
them back.
Also document this protocol quirk.
Add a test case that shows the failure. It might still succeed even
without the patch when run on a fast enough server, but it suffices to
show the bug in enough cases that it would be noticed in buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Henry Hinze <henry.hinze@gmail.com>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/16643-eaadeb2a1a58d28c@postgresql.org
Because the code path taken for SQL commands executed in a walsender
will update the process title, we pretty much have to update the
title for replication commands as well. Otherwise, the title shows
"idle" for the rest of a logical walsender's lifetime once it's
executed any SQL command.
Playing with this, I confirm that a walsender now typically spends
most of its life reporting
walsender postgres [local] START_REPLICATION
Considering this in isolation, it might be better to have it say
walsender postgres [local] sending replication data
However, consistency with the other cases seems to be a stronger
argument.
In passing, remove duplicative pgstat_report_activity call.
Discussion: https://postgr.es/m/880181.1600026471@sss.pgh.pa.us
Since commit fd5942c18f (2012, 9.3-era), walsender has been sending
completion tags for certain replication commands twice -- and they're
not even consistent. Apparently neither libpq nor JDBC have a problem
with it, but it's not kosher. Fix by remove the EndCommand() call in
the common code path for them all, and inserting specific calls to
EndReplicationCommand() specifically in those places where it's needed.
EndReplicationCommand() is a new simple function to send the completion
tag for replication commands. Do this instead of sending a generic
SELECT completion tag for them all, which was also pretty bogus (if
innocuous). While at it, change StartReplication() to use
EndReplicationCommand() instead of pg_puttextmessage().
In commit 2f9661311b, I failed to realize that replication commands
are not close-enough kin of regular SQL commands, so the
DROP_REPLICATION_SLOT tag I added is undeserved and a type pun. Take it
out.
Backpatch to 13, where the latter commit appeared. The duplicate tag
has been sent since 9.3, but since nothing is broken, it doesn't seem
worth fixing.
Per complaints from Tom Lane.
Discussion: https://postgr.es/m/1347966.1600195735@sss.pgh.pa.us
We decided that the policy established in commit 7634bd4f6 for
the bgwriter, checkpointer, walwriter, and walreceiver processes,
namely that they should accept SIGQUIT at all times, really ought
to apply uniformly to all postmaster children. Therefore, get
rid of the duplicative and inconsistent per-process code for
establishing that signal handler and removing SIGQUIT from BlockSig.
Instead, make InitPostmasterChild do it.
The handler set up by InitPostmasterChild is SignalHandlerForCrashExit,
which just summarily does _exit(2). In interactive backends, we
almost immediately replace that with quickdie, since we would prefer
to try to tell the client that we're dying. However, this patch is
changing the behavior of autovacuum (both launcher and workers), as
well as walsenders. Those processes formerly also used quickdie,
but AFAICS that was just mindless copy-and-paste: they don't have
any interactive client that's likely to benefit from being told this.
The stats collector continues to be an outlier, in that it thinks
SIGQUIT means normal exit. That should probably be changed for
consistency, but there's another patch set where that's being
dealt with, so I didn't do so here.
Discussion: https://postgr.es/m/644875.1599933441@sss.pgh.pa.us
A walsender process that has executed a SQL command left the text of
that command in pg_stat_activity.query indefinitely, which is quite
confusing if it's in RUNNING state but not doing that query. An easy
and useful fix is to treat replication commands as if they were SQL
queries, and show them in pg_stat_activity according to the same rules
as for regular queries. While we're at it, it seems also sensible to
set debug_query_string, allowing error logging and debugging to see
the replication command.
While here, clean up assorted silliness in exec_replication_command:
* The SQLCmd path failed to restore CurrentMemoryContext to the caller's
value, and failed to delete the temp context created in this routine.
It's only through great good fortune that these oversights did not
result in long-term memory leaks or other problems. It seems cleaner
to code SQLCmd as a separate early-exit path, so do it like that.
* Remove useless duplicate call of SnapBuildClearExportedSnapshot().
* replication_scanner_finish() was never called.
None of those things are significant enough to merit a backpatch,
so this is for HEAD only.
Discussion: https://postgr.es/m/880181.1600026471@sss.pgh.pa.us
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c9, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad73, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
Previously UpdateSpillStats() called elog(DEBUG2) while holding
the spinlock even though the local variables that the elog() accesses
don't need to be protected by the lock. Since spinlocks are intended
for very short-term locks, they should not be used when calling
elog(DEBUG2). So this commit moves that elog() out of spinlock period.
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila and Fujii Masao
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
In commit 850196b610 I (Álvaro) failed to handle the case of walsender
shutting down on an error before setting up its 'xlogreader' pointer;
the error handling code dereferences the pointer, causing a crash.
Fix by testing the pointer before trying to dereference it.
Kyotaro authored the code fix; I adopted Nathan's test case to be used
by the TAP tests and added the necessary PostgresNode change.
Reported-by: Nathan Bossart <bossartn@amazon.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/C04FC24E-903D-4423-B312-6910E4D846E5@amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
The one in xlogreader.h was pointed out by Antonin Houska; I (Álvaro) noticed the
others by grepping.
Author: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/28250.1589186654@antos
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
Before sleeping, WalSndWaitForWal() sends a keepalive if MyWalSnd->write
< sentPtr. When the latest physical LSN yields no logical replication
messages (a common case), that keepalive elicits a reply. Processing
the reply updates pg_stat_replication.replay_lsn. WalSndLoop() lacks
that; when WalSndLoop() slept, replay_lsn advancement could stall until
wal_receiver_status_interval elapsed. This sometimes stalled
src/test/subscription/t/001_rep_changes.pl for up to 10s.
Reviewed by Fujii Masao and Michael Paquier.
Discussion: https://postgr.es/m/20200418070142.GA1075445@rfd.leadboat.com
We have repeatedly seen the buildfarm reach the Assert(false) in
SyncRepGetSyncStandbysPriority. This apparently is due to failing to
consider the possibility that the sync_standby_priority values in
shared memory might be inconsistent; but they will be whenever only
some of the walsenders have updated their values after a change in
the synchronous_standby_names setting. That function is vastly too
complex for what it does, anyway, so rewriting it seems better than
trying to apply a band-aid fix.
Furthermore, the API of SyncRepGetSyncStandbys is broken by design:
it returns a list of WalSnd array indexes, but there is nothing
guaranteeing that the contents of the WalSnd array remain stable.
Thus, if some walsender exits and then a new walsender process
takes over that WalSnd array slot, a caller might make use of
WAL position data that it should not, potentially leading to
incorrect decisions about whether to release transactions that
are waiting for synchronous commit.
To fix, replace SyncRepGetSyncStandbys with a new function
SyncRepGetCandidateStandbys that copies all the required data
from shared memory while holding the relevant mutexes. If the
associated walsender process then exits, this data is still safe to
make release decisions with, since we know that that much WAL *was*
sent to a valid standby server. This incidentally means that we no
longer need to treat sync_standby_priority as protected by the
SyncRepLock rather than the per-walsender mutex.
SyncRepGetSyncStandbys is no longer used by the core code, so remove
it entirely in HEAD. However, it seems possible that external code is
relying on that function, so do not remove it from the back branches.
Instead, just remove the known-incorrect Assert. When the bug occurs,
the function will return a too-short list, which callers should treat
as meaning there are not enough sync standbys, which seems like a
reasonably safe fallback until the inconsistent state is resolved.
Moreover it's bug-compatible with what has been happening in non-assert
builds. We cannot do anything about the walsender-replacement race
condition without an API/ABI break.
The bogus assertion exists back to 9.6, but 9.6 is sufficiently
different from the later branches that the patch doesn't apply at all.
I chose to just remove the bogus assertion in 9.6, feeling that the
probability of a bad outcome from the walsender-replacement race
condition is too low to justify rewriting the whole patch for 9.6.
Discussion: https://postgr.es/m/21519.1585272409@sss.pgh.pa.us
Before sleeping, WalSndWaitForWal() sends a keepalive if MyWalSnd->write
< sentPtr. That is important in logical replication. When the latest
physical LSN yields no logical replication messages (a common case),
that keepalive elicits a reply, and processing the reply updates
pg_stat_replication.replay_lsn. WalSndLoop() lacks that; when
WalSndLoop() slept, replay_lsn advancement could stall until
wal_receiver_status_interval elapsed. This sometimes stalled
src/test/subscription/t/001_rep_changes.pl for up to 10s.
Discussion: https://postgr.es/m/20200406063649.GA3738151@rfd.leadboat.com
GetWalRcvWriteRecPtr() previously reported the latest *flushed*
location. Adopt the conventional terminology used elsewhere in the tree
by renaming it to GetWalRcvFlushRecPtr(), and likewise for some related
variables that used the term "received".
Add a new definition of GetWalRcvWriteRecPtr(), which returns the latest
*written* value. This will allow later patches to use the value for
non-data-integrity purposes, without having to wait for the flush
pointer to advance.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
Commit 0d8c9c1210 allowed BASE_BACKUP to
acquire a ResourceOwner without a transaction so that the backup
manifest functionality could use a BufFile, but it overlooked the fact
that when a walsender is used with replication=database, it might have
a transaction in progress, because in that mode, SQL and replication
commands can be mixed. Try to fix things up so that the two cleanup
mechanisms don't conflict.
Per buildfarm member serinus, which triggered the problem when
CREATE_REPLICATION_SLOT failed from inside a transaction. It passed
on the subsequent run, so evidently the failure doesn't happen every
time.
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
It devolved into a content-less wrapper over read_local_xlog_page, with
nothing to add, plus it's easily confused with walsender's
logical_read_xlog_page. There doesn't seem to be any reason for it to
stay.
src/include/replication/logicalfuncs.h becomes empty, so remove it too.
The prototypes it initially had were absorbed by generated fmgrprotos.h.
Discussion: https://postgr.es/m/20191115214102.GA15616@alvherre.pgsql
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Amit Kapila
Tom Lane
Alvaro Herrera
Thomas Munro
Stephen Frost
Peter Eisentraut
Fujii Masao
Bruce Momjian
Jeff Davis
Andres Freund
Michael Paquier
Noah Misch
Robert Haas