If you create a table and don't insert any data into it, the relation file
is never fsync'd. You don't lose data, because an empty table doesn't have
any data to begin with, but if you crash and lose the file, subsequent
operations on the table will fail with "could not open file" error.
To fix, register an fsync request in mdcreate(), like we do for mdwrite().
Per discussion, we probably should also fsync the containing directory
after creating a new file. But that's a separate and much wider issue.
Backpatch to all supported versions.
Reviewed-by: Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/d47d8122-415e-425c-d0a2-e0160829702d%40iki.fi
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
When committing a transaction that dropped a relation, we previously
truncated only the first segment file to free up disk space (the one
that won't be unlinked until the next checkpoint).
Truncate higher numbered segments too, even though we unlink them on
commit. This frees the disk space immediately, even if other backends
have open file descriptors and might take a long time to get around to
handling shared invalidation events and closing them. Also extend the
same behavior to the first segment, in recovery.
Back-patch to all supported releases.
Bug: #16663
Reported-by: Denis Patron <denis.patron@previnet.it>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Reviewed-by: Neil Chen <carpenter.nail.cz@gmail.com>
Reviewed-by: David Zhang <david.zhang@highgo.ca>
Discussion: https://postgr.es/m/16663-fe97ccf9932fc800%40postgresql.org
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Provide PrefetchSharedBuffer(), a variant that takes SMgrRelation, for
use in recovery. Rename LocalPrefetchBuffer() to PrefetchLocalBuffer()
for consistency.
Add a return value to all of these. In recovery, tolerate and report
missing files, so we can handle relations unlinked before crash recovery
began. Also report cache hits and misses, so that callers can do faster
buffer lookups and better I/O accounting.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
FileClose() failure ordinarily causes a PANIC. Suppose the user
disables that PANIC via data_sync_retry=on. After mdclose() issued a
FileClose() that failed, calls into md.c raised SIGSEGV. This fix adds
repalloc() calls during mdclose(); update a comment about ignoring
repalloc() cost. The rate of relation segment count change is a minor
factor; more relevant to overall performance is the rate of mdclose()
and subsequent re-opening of segments. Back-patch to v10, where commit
45e191e3aa introduced the bug.
Reviewed by Kyotaro Horiguchi.
Discussion: https://postgr.es/m/20191222091930.GA1280238@rfd.leadboat.com
The previous commit failed to consider that FileGetRawDesc() might
not return a valid fd, as discovered on the build farm. Switch to
using the File interface only.
Back-patch to 12, like the previous commit.
_mdfd_getseg() opens all segments up to the requested one. That
causes problems for mdsyncfiletag(), if mdunlinkfork() has
already unlinked other segment files. Open the file we want
directly by name instead, if it's not already open.
The consequence of this bug was a rare panic in the checkpointer,
made more likely if you saturated the sync request queue so that
the SYNC_FORGET_REQUEST messages for a given relation were more
likely to be absorbed in separate cycles by the checkpointer.
Back-patch to 12. Defect in commit 3eb77eba.
Author: Thomas Munro
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20191119115759.GI30362%40telsasoft.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
When a relation is truncated, shared_buffers needs to be scanned
so that any buffers for the relation forks are invalidated in it.
Previously, shared_buffers was scanned for each relation forks, i.e.,
MAIN, FSM and VM, when VACUUM truncated off any empty pages
at the end of relation or TRUNCATE truncated the relation in place.
Since shared_buffers needed to be scanned multiple times,
it could take a long time to finish those commands especially
when shared_buffers was large.
This commit changes the logic so that shared_buffers is scanned only
one time for those three relation forks.
Author: Kirk Jamison
Reviewed-by: Masahiko Sawada, Thomas Munro, Alvaro Herrera, Takayuki Tsunakawa and Fujii Masao
Discussion: https://postgr.es/m/D09B13F772D2274BB348A310EE3027C64E2067@g01jpexmbkw24
Potential future SMGR implementations may not want to create
tablespace directories when creating an SMGR relation. Move that
logic to mdcreate(). Move the initialization of md-specific
data structures from smgropen() to a new callback mdopen().
Author: Thomas Munro
Reviewed-by: Shawn Debnath (as part of an earlier patch set)
Discussion: https://postgr.es/m/CA%2BhUKG%2BOZqOiOuDm5tC5DyQZtJ3FH4%2BFSVMqtdC4P1atpJ%2Bqhg%40mail.gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Commit 3eb77eba5a renamed some functions, but forgot to
update some comments referencing to those functions.
This commit fixes those function names in the comments.
Kyotaro Horiguchi
Commit 3eb77eba moved a _mdfd_getseg() call from mdsync() into a new
callback function mdsyncfiletag(), but didn't get the arguments quite
right. Without the EXTENSION_DONT_CHECK_SIZE flag we fail to open a
segment if lower-numbered segments have been truncated, and it wants
a block number rather than a segment number.
While comparing with the older coding, also remove an unnecessary
clobbering of errno, and adjust the code in mdunlinkfiletag() to
ressemble the original code from mdpostckpt() more closely instead
of using an unnecessary call to smgropen().
Author: Thomas Munro
Discussion: https://postgr.es/m/CA%2BhUKGL%2BYLUOA0eYiBXBfwW%2BbH5kFgh94%3DgQH0jHEJ-t5Y91wQ%40mail.gmail.com
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
Relations dropped in a single transaction are tracked in a list of
unowned relations. With large number of dropped relations this resulted
in poor performance at the end of a transaction, when the relations are
removed from the singly linked list one by one.
Commit b4166911 attempted to address this issue (particularly when it
happens during recovery) by removing the relations in a reverse order,
resulting in O(1) lookups in the list of unowned relations. This did
not work reliably, though, and it was possible to trigger the O(N^2)
behavior in various ways.
Instead of trying to remove the relations in a specific order with
respect to the linked list, which seems rather fragile, switch to a
regular doubly linked. That allows us to remove relations cheaply no
matter where in the list they are.
As b4166911 was a bugfix, backpatched to all supported versions, do the
same thing here.
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/80c27103-99e4-1d0c-642c-d9f3b94aaa0a%402ndquadrant.com
Backpatch-through: 9.4
Before commit 3fa2bb31 this type appeared in the catalogs to
select which of several block storage mechanisms each relation
used.
New features under development propose to revive the concept of
different block storage managers for new kinds of data accessed
via bufmgr.c, but don't need to put references to them in the
catalogs. So, avoid useless maintenance work on this type by
dropping it. Update some regression tests that were referencing
it where any type would do.
Discussion: https://postgr.es/m/CA%2BhUKG%2BDE0mmiBZMtZyvwWtgv1sZCniSVhXYsXkvJ_Wo%2B83vvw%40mail.gmail.com
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
If fsync() fails, md.c must keep the request in its bitmap, so that
future attempts will try again.
Back-patch to all supported releases.
Author: Thomas Munro
Reviewed-by: Amit Kapila
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y3i1ia4w.fsf%40news-spur.riddles.org.uk
When multiple relations are deleted at the same transaction,
the files of those relations are deleted by one call to smgrdounlinkall(),
which leads to scan whole shared_buffers only one time. OTOH,
previously, during recovery, smgrdounlink() (not smgrdounlinkall()) was
called for each file to delete, which led to scan shared_buffers
multiple times. Obviously this could cause to increase the WAL replay
time very much especially when shared_buffers was huge.
To alleviate this situation, this commit changes the recovery so that
it also calls smgrdounlinkall() only one time to delete multiple
relation files.
This is just fix for oversight of commit 279628a0a7, not new feature.
So, per discussion on pgsql-hackers, we concluded to backpatch this
to all supported versions.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andres Freund, Thomas Munro, Kyotaro Horiguchi, Takayuki Tsunakawa
Discussion: https://postgr.es/m/CAHGQGwHVQkdfDqtvGVkty+19cQakAydXn1etGND3X0PHbZ3+6w@mail.gmail.com
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
Heikki Linnakangas
Tom Lane
Peter Eisentraut
Amit Kapila
Bruce Momjian
Thomas Munro
Noah Misch
Michael Paquier
Andres Freund
Fujii Masao
Tomas Vondra
Robert Haas
Peter Eisentraut