This makes pg_verify_mbstr() function faster, by allowing more efficient
encoding-specific implementations. All the implementations included in
this commit are pretty naive, they just call the same encoding-specific
verifychar functions that were used previously, but that already gives a
performance boost because the tight character-at-a-time loop is simpler.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01@iki.fi
The same code pattern was repeated four times when compiling a SHA-2
hash. This refactoring has the advantage to issue a compilation warning
if a new value is added to pg_cryptohash_type, so as anybody doing an
addition in this area would need to consider if support for a new SQL
function is needed or not.
Author: Sehrope Sarkuni, Michael Paquier
Discussion: https://postgr.es/m/YA7DvLRn2xnTgsMc@paquier.xyz
When commit f425b605 introduced cost based vacuum delays back in 2004,
the defaults reflected then-current trends in hardware, as well as
certain historical limitations in PostgreSQL. There have been enormous
improvements in both areas since that time. The cost limit GUC defaults
finally became much more representative of current trends following
commit cbccac37, which decreased autovacuum_vacuum_cost_delay's default
by 10x for PostgreSQL 12 (it went from 20ms to only 2ms).
The relative costs have shifted too. This should also be accounted for
by the defaults. More specifically, the relative importance of avoiding
dirtying pages within VACUUM has greatly increased, primarily due to
main memory capacity scaling and trends in flash storage. Within
Postgres itself, improvements like sequential access during index
vacuuming (at least in nbtree and GiST indexes) have also been
contributing factors.
To reflect all this, decrease the default of vacuum_cost_page_miss to 2.
Since the default of vacuum_cost_page_dirty remains 20, dirtying a page
is now considered 10x "costlier" than a page miss by default.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzmLPFnkWT8xMjmcsm7YS3+_Qi3iRWAb2+_Bc8UhVyHfuA@mail.gmail.com
This patch essentially is cleaning up technical debt left behind
by the original implementation of plpgsql procedures, particularly
commit d92bc83c4. That patch (or more precisely, follow-on patches
fixing its worst bugs) forced us to re-plan CALL and DO statements
each time through, if we're in a non-atomic context. That wasn't
for any fundamental reason, but just because use of a saved plan
requires having a ResourceOwner to hold a reference count for the
plan, and we had no suitable resowner at hand, nor would the
available APIs support using one if we did. While it's not that
expensive to create a "plan" for CALL/DO, the cycles do add up
in repeated executions.
This patch therefore makes the following API changes:
* GetCachedPlan/ReleaseCachedPlan are modified to let the caller
specify which resowner to use to pin the plan, rather than forcing
use of CurrentResourceOwner.
* spi.c gains a "SPI_execute_plan_extended" entry point that lets
callers say which resowner to use to pin the plan. This borrows the
idea of an options struct from the recently added SPI_prepare_extended,
hopefully allowing future options to be added without more API breaks.
This supersedes SPI_execute_plan_with_paramlist (which I've marked
deprecated) as well as SPI_execute_plan_with_receiver (which is new
in v14, so I just took it out altogether).
* I also took the opportunity to remove the crude hack of letting
plpgsql reach into SPI private data structures to mark SPI plans as
"no_snapshot". It's better to treat that as an option of
SPI_prepare_extended.
Now, when running a non-atomic procedure or DO block that contains
any CALL or DO commands, plpgsql creates a ResourceOwner that
will be used to pin the plans of the CALL/DO commands. (In an
atomic context, we just use CurrentResourceOwner, as before.)
Having done this, we can just save CALL/DO plans normally,
whether or not they are used across transaction boundaries.
This seems to be good for something like 2X speedup of a CALL
of a trivial procedure with a few simple argument expressions.
By restricting the creation of an extra ResourceOwner like this,
there's essentially zero penalty in cases that can't benefit.
Pavel Stehule, with some further hacking by me
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
Move it to class 57 (Operator Intervention), which seems like a
better choice given that from the client's standpoint it behaves
a heck of a lot like, e.g., ERRCODE_ADMIN_SHUTDOWN.
In a green field I'd put ERRCODE_IDLE_IN_TRANSACTION_SESSION_TIMEOUT
here as well. But that's been around for a few years, so it's
probably too late to change its SQLSTATE code.
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
A very common usage pattern is that we set a timeout that we don't
expect to reach, cancel it after a little bit, and later repeat.
With the original implementation of timeout.c, this results in one
setitimer() call per timeout set or cancel. We can do a lot better
by being lazy about changing the timeout interrupt request, namely:
(1) never cancel the outstanding interrupt, even when we have no
active timeout events;
(2) if we need to set an interrupt, but there already is one pending
at or before the required time, leave it alone. When the interrupt
happens, the signal handler will reschedule it at whatever time is
then needed.
For example, with a one-second setting for statement_timeout, this
method results in having to interact with the kernel only a little
more than once a second, no matter how many statements we execute
in between. The mainline code might never call setitimer() at all
after the first time, while each time the signal handler fires,
it sees that the then-pending request is most of a second away,
and that's when it sets the next interrupt request for. Each
mainline timeout-set request after that will observe that the time
it wants is past the pending interrupt request time, and do nothing.
This also works pretty well for cases where a few different timeout
lengths are in use, as long as none of them are very short. But
that describes our usage well.
Idea and original patch by Thomas Munro; I fixed a race condition
and improved the comments.
Discussion: https://postgr.es/m/CA+hUKG+o6pbuHBJSGnud=TadsuXySWA7CCcPgCt2QE9F6_4iHQ@mail.gmail.com
Forced cache invalidation (CLOBBER_CACHE_ALWAYS) has been impractical
to use for testing in PostgreSQL because it's so slow and because it's
toggled on/off only at build time. It is helpful when hunting bugs in
any code that uses the sycache/relcache because causes cache
invalidations to be injected whenever it would be possible for an
invalidation to occur, whether or not one was really pending.
Address this by providing run-time control over cache clobber
behaviour using the new debug_invalidate_system_caches_always GUC.
Support is not compiled in at all unless assertions are enabled or
CLOBBER_CACHE_ENABLED is explicitly defined at compile time. It
defaults to 0 if compiled in, so it has negligible effect on assert
build performance by default.
When support is compiled in, test code can now set
debug_invalidate_system_caches_always=1 locally to a backend to test
specific queries, functions, extensions, etc. Or tests can toggle it
globally for a specific test case while retaining normal performance
during test setup and teardown.
For backwards compatibility with existing test harnesses and scripts,
debug_invalidate_system_caches_always defaults to 1 if
CLOBBER_CACHE_ALWAYS is defined, and to 3 if CLOBBER_CACHE_RECURSIVE
is defined.
CLOBBER_CACHE_ENABLED is now visible in pg_config_manual.h, as is the
related RECOVER_RELATION_BUILD_MEMORY setting for the relcache.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMsr+YF=+ctXBZj3ywmvKNUjWpxmuTuUKuv-rgbHGX5i5pLstQ@mail.gmail.com
Aside from being queriable via SHOW, this value is sent to the client
immediately at session startup, and again later on if the server gets
promoted to primary during the session. The immediate report will be
used in an upcoming patch to avoid an extra round trip when trying to
connect to a primary server.
Haribabu Kommi, Greg Nancarrow, Tom Lane; reviewed at various times
by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
In power_var_int(), the computation of the number of significant
digits to use in the computation used log(Abs(exp)), which isn't safe
because Abs(exp) returns INT_MIN when exp is INT_MIN. Use fabs()
instead of Abs(), so that the exponent is cast to a double before the
absolute value is taken.
Back-patch to 9.6, where this was introduced (by 7d9a4737c2).
Discussion: https://postgr.es/m/CAEZATCVd6pMkz=BrZEgBKyqqJrt2xghr=fNc8+Z=5xC6cgWrWA@mail.gmail.com
If the substring start index and length overflow when added together,
substring() misbehaved, either throwing a bogus "negative substring
length" error on a case that should succeed, or failing to complain that
a negative length is negative (and instead returning the whole string,
in most cases). Unsurprisingly, the text, bytea, and bit variants of
the function all had this issue. Rearrange the logic to ensure that
negative lengths are always rejected, and add an overflow check to
handle the other case.
Also install similar guards into detoast_attr_slice() (nee
heap_tuple_untoast_attr_slice()), since it's far from clear that
no other code paths leading to that function could pass it values
that would overflow.
Patch by myself and Pavel Stehule, per bug #16804 from Rafi Shamim.
Back-patch to v11. While these bugs are old, the common/int.h
infrastructure for overflow-detecting arithmetic didn't exist before
commit 4d6ad3125, and it doesn't seem like these misbehaviors are bad
enough to justify developing a standalone fix for the older branches.
Discussion: https://postgr.es/m/16804-f4eeeb6c11ba71d4@postgresql.org
Performance issues with the preceding patch to re-implement array
element assignment within pl/pgsql led me to realize that the read/write
parameter mechanism is misdesigned. Instead of requiring the assignment
source expression to be such that *all* its references to the target
variable could be passed as R/W, we really want to identify *one*
reference to the target variable to be passed as R/W, allowing any other
ones to be passed read/only as they would be by default. As long as the
R/W reference is a direct argument to the top-level (hence last to be
executed) function in the expression, there is no harm in R/O references
being passed to other lower parts of the expression. Nor is there any
use-case for more than one argument of the top-level function being R/W.
Hence, rewrite that logic to identify one single Param that references
the target variable, and make only that Param pass a read/write
reference, not any other Params referencing the target variable.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This commit preserves the logic of multirange_in() but makes it more clear
what's going on. Also, this commit fixes the compiler warning spotted by the
buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2246043.1609290699%40sss.pgh.pa.us
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
Attempt to get selectivity estimation for @> (anymultirange, anyrange) operator
caused an error in buildfarm, because this operator was missed in switch()
of calc_hist_selectivity(). Fix that and also make regression tests reliably
check that selectivity estimation for (multi)ranges doesn't fall. Previously,
whether we test selectivity estimation for (multi)ranges depended on
whether autovacuum managed to gather concurrently to the test.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/X%2BwmgjRItuvHNBeV%40paquier.xyz
secure_open_gssapi() installed the krb_server_keyfile setting as
KRB5_KTNAME unconditionally, so long as it's not empty. However,
pg_GSS_recvauth() only installed it if KRB5_KTNAME wasn't set already,
leading to a troubling inconsistency: in theory, clients could see
different sets of server principal names depending on whether they
use GSSAPI encryption. Always using krb_server_keyfile seems like
the right thing, so make both places do that. Also fix up
secure_open_gssapi()'s lack of a check for setenv() failure ---
it's unlikely, surely, but security-critical actions are no place
to be sloppy.
Also improve the associated documentation.
This patch does nothing about secure_open_gssapi()'s use of setenv(),
and indeed causes pg_GSS_recvauth() to use it too. That's nominally
against project portability rules, but since this code is only built
with --with-gssapi, I do not feel a need to do something about this
in the back branches. A fix will be forthcoming for HEAD though.
Back-patch to v12 where GSSAPI encryption was introduced. The
dubious behavior in pg_GSS_recvauth() goes back further, but it
didn't have anything to be inconsistent with, so let it be.
Discussion: https://postgr.es/m/2187460.1609263156@sss.pgh.pa.us
When the postmaster sends SIGQUIT to its children, there's no real
need for all the children to log that fact; the postmaster already
made a log entry about it, so adding perhaps dozens or hundreds of
child-process log entries adds nothing of value. So, let's introduce
a new ereport level to specify "WARNING, but never send to log" and
use that for these messages.
Such a change wouldn't have been desirable before commit 7e784d1dc,
because if someone manually SIGQUIT's a backend, we *do* want to log
that. But now we can tell the difference between a signal that was
issued by the postmaster and one that was not with reasonable
certainty.
While we're here, also clear error_context_stack before ereport'ing,
to prevent error callbacks from being invoked in the signal-handler
context. This should reduce the odds of getting hung up while trying
to notify the client.
Per a suggestion from Andres Freund.
Discussion: https://postgr.es/m/20201225230331.hru3u6obyy6j53tk@alap3.anarazel.de
6df7a9698b has introduced a set of operators between ranges and multiranges.
Existing GiST indexes for ranges could easily support majority of them.
This commit adds support for new operators to the existing range GiST indexes.
New operators resides the same strategy numbers as existing ones. Appropriate
check function is determined using the subtype.
Catversion is bumped.
There is a set of *_internal() functions exposed in
include/utils/multirangetypes.h. This commit improves the signatures of these
functions in two ways.
* Add const qualifies where applicable.
* Replace multirange typecache argument with range typecache argument.
Multirange typecache was used solely to find the range typecache. At the
same time, range typecache is easier for the caller to find.
We have operators for checking if the multirange contains a range but don't
have the opposite. This commit improves completeness of the operator set by
adding two new operators: @> (anyrange,anymultirange) and
<@(anymultirange,anyrange).
Catversion is bumped.
Two functions multirange_range_overlaps_bsearch_comparison() and
multirange_range_contains_bsearch_comparison() contain bugs of returning -1
instead of 1. This commit fixes these bugs and adds corresponding regression
tests.
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The code in charge of processing a single invalidation message has been
using since 568d413 the structure for relation mapping messages. This
had fortunately no consequence as both locate the database ID at the
same location, but it could become a problem in the future if this area
of the code changes.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/8044c223-4d3a-2cdb-42bf-29940840ce94@postgrespro.ru
Backpatch-through: 9.5
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This makes existing sessions reflect "ALTER ROLE ... [NO]INHERIT" as
quickly as they have been reflecting "GRANT role_name". Back-patch to
9.5 (all supported versions).
Reviewed by Nathan Bossart.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
The parsing of this parameter has been using strtoul(), which is not
portable across platforms. On most Unix platforms, unsigned long has a
size of 64 bits, while on Windows it is 32 bits. It is common in
recovery scenarios to rely on the output of txid_current() or even the
newer pg_current_xact_id() to get a transaction ID for setting up
recovery_target_xid. The value returned by those functions includes the
epoch in the computed result, which would cause strtoul() to fail where
unsigned long has a size of 32 bits once the epoch is incremented.
WAL records and 2PC data include only information about 32-bit XIDs and
it is not possible to have XIDs across more than one epoch, so
discarding the high bits from the transaction ID set has no impact on
recovery. On the contrary, the use of strtoul() prevents a consistent
behavior across platforms depending on the size of unsigned long.
This commit changes the parsing of recovery_target_xid to use
pg_strtouint64() instead, available down to 9.6. There is one TAP test
stressing recovery with recovery_target_xid, where a tweak based on
pg_reset{xlog,wal} is added to bump the XID epoch so as this change gets
tested, as per an idea from Alexander Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16780-107fd0c0385b1035@postgresql.org
Backpatch-through: 9.6
The jsonb || jsonb operator arbitrarily rejected certain combinations
of scalar and non-scalar inputs, while being willing to concatenate
other combinations. This was of course quite undocumented. Rather
than trying to document it, let's just remove the restriction,
creating a uniform rule that unless we are handling an object-to-object
concatenation, non-array inputs are converted to one-element arrays,
resulting in an array-to-array concatenation. (This does not change
the behavior for any case that didn't throw an error before.)
Per complaint from Joel Jacobson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/163099.1608312033@sss.pgh.pa.us
6df7a9698b introduces multirange types, whose typanalyze function shares
infrastructure with range types typanalyze function. Since 6df7a9698b,
information about type gathered by statistics is filled from typcache.
But typalign is mistakenly always set to double. This commit fixes this
oversight.
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
A narrow reading of the C standard says that memcpy(x,x,n) is undefined,
although it's hard to envision an implementation that would really
misbehave. However, analysis tools such as valgrind might whine about
this; accordingly, let's band-aid relmapper.c to not do it.
See also 5b630501e, d3f4e8a8a, ad7b48ea0, and other similar fixes.
Apparently, none of those folk tried valgrinding initdb? This has been
like this for long enough that I'm surprised it hasn't been reported
before.
Back-patch, just in case anybody wants to use a back branch on a platform
that complains about this; we back-patched those earlier fixes too.
Discussion: https://postgr.es/m/161790.1608310142@sss.pgh.pa.us
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
Commit c7aba7c14 didn't add this, but after more fooling with the
feature I feel that it'd be useful. To make this possible, refactor
getSubscriptingRoutines() so that the caller is responsible for
throwing any error. (In clauses.c, I just chose to make the
most conservative assumption rather than throwing an error. We don't
expect failures there anyway really, so the code space for an error
message would be a poor investment.)
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
It was still using a scan of pg_depend instead of using the conindid
column that has been added since.
Since it is now just a catalog lookup wrapper and not related to
pg_depend, move from pg_depend.c to lsyscache.c.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/4688d55c-9a2e-9a5a-d166-5f24fe0bf8db%40enterprisedb.com
This GUC was always intended as a temporary solution to help with
finding 9.4-to-9.5 migration issues. Now that all pre-9.5 branches
are out of support, and 9.5 will be too before v14 is released,
it seems like it's okay to drop it. Doing so allows removal of
several hundred lines of poorly-tested code in parse_expr.c,
which have been a fertile source of bugs when people did use this.
Discussion: https://postgr.es/m/2234320.1607117945@sss.pgh.pa.us
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
87ae969 has created two new files called cryptohash{_openssl}.c in
src/common/, whose names overlap with the existing backend file called
cryptohashes.c dedicated to the SQL wrappers for SHA2 and MD5. This
file is renamed to cryptohashfuncs.c to be more consistent with the
surroundings and reduce the confusion with the new cryptohash interface
of src/common/.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/X8hHhaQgbMbW+aGU@paquier.xyz
The use of low-level hash routines is not recommended by upstream
OpenSSL since 2000, and pgcrypto already switched to EVP as of 5ff4a67.
This takes advantage of the refactoring done in 87ae969 that has
introduced the allocation and free routines for cryptographic hashes.
Since 1.1.0, OpenSSL does not publish the contents of the cryptohash
contexts, forcing any consumers to rely on OpenSSL for all allocations.
Hence, the resource owner callback mechanism gains a new set of routines
to track and free cryptohash contexts when using OpenSSL, preventing any
risks of leaks in the backend. Nothing is needed in the frontend thanks
to the refactoring of 87ae969, and the resowner knowledge is isolated
into cryptohash_openssl.c.
Note that this also fixes a failure with SCRAM authentication when using
FIPS in OpenSSL, but as there have been few complaints about this
problem and as this causes an ABI breakage, no backpatch is done.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Heikki Linnakangas
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Discussion: https://postgr.es/m/20180911030250.GA27115@paquier.xyz
GSS information (if used) such as if the connection was authorized using
GSS or if it was encrypted using GSS, and perhaps most importantly, what
the GSS principal used for the authentication was, is extremely useful
but wasn't being included in the connection authorized log message.
Therefore, add to the connection authorized log message that
information, in a similar manner to how we log SSL information when SSL
is used for a connection.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy
Discussion: https://www.postgresql.org/message-id/CALDaNm2N1385_Ltoo%3DS7VGT-ESu_bRQa-sC1wg6ikrM2L2Z49w%40mail.gmail.com
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
This commit changes restore_command from PGC_POSTMASTER to PGC_SIGHUP.
As the side effect of this commit, restore_command can be reset to
empty during archive recovery. In this setting, archive recovery
tries to replay only WAL files available in pg_wal directory. This is
the same behavior as when the command that always fails is specified
in restore_command.
Note that restore_command still must be specified (not empty) when
starting archive recovery, even after applying this commit. This is
necessary as the safeguard to prevent users from forgetting to
specify restore_command and starting archive recovery.
Thanks to Peter Eisentraut, Michael Paquier, Andres Freund,
Robert Haas and Anastasia Lubennikova for discussion.
Author: Sergei Kornilov
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/2317771549527294@sas2-985f744271ca.qloud-c.yandex.net
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Up to now, we sent a ParameterStatus message to the client immediately
upon any change in the active value of any GUC_REPORT variable. This
was only barely okay when the feature was designed; now that we have
things like function SET clauses, there are very plausible use-cases
where a GUC_REPORT variable might change many times within a query
--- and even end up back at its original value, perhaps. Fortunately
most of our GUC_REPORT variables are unlikely to be changed often;
but there are proposals in play to enlarge that set, or even make it
user-configurable.
Hence, let's fix things to not generate more than one ParameterStatus
message per variable per query, and to not send any message at all
unless the end-of-query value is different from what we last reported.
Discussion: https://postgr.es/m/5708.1601145259@sss.pgh.pa.us
currtid() and currtid2() are an undocumented set of functions whose sole
known user is the Postgres ODBC driver, able to retrieve the latest TID
version for a tuple given by the caller of those functions.
As used by Postgres ODBC, currtid() is a shortcut able to retrieve the
last TID loaded into a backend by passing an OID of 0 (magic value)
after a tuple insertion. This is removed in this commit, as it became
obsolete after the driver began using "RETURNING ctid" with inserts, a
clause supported since Postgres 8.2 (using RETURNING is better for
performance anyway as it reduces the number of round-trips to the
backend).
currtid2() is still used by the driver, so this remains around for now.
Note that this function is kept in its original shape for backward
compatibility reasons.
Per discussion with many people, including Andres Freund, Peter
Eisentraut, Álvaro Herrera, Hiroshi Inoue, Tom Lane and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20200603021448.GB89559@paquier.xyz
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
Here we use a bit of preprocessor trickery to coax supporting compilers
into laying out their generated code so that the code that's in the same
branch as elog(ERROR)/ereport(ERROR) calls is moved away from the hot
path. Effectively, this reduces the size of the hot code meaning that it
can sit on fewer cache lines.
Performance improvements of between 10-15% have been seen on highly CPU
bound workloads using pgbench's TPC-b benchmark.
What's achieved here is very similar to putting the error condition inside
an unlikely() macro. For example;
if (unlikely(x < 0))
elog(ERROR, "invalid x value");
now there's no need to make use of unlikely() here as the common macro
used by elog and ereport will now see that elevel is >= ERROR and make use
of a pg_attribute_cold marked version of errstart().
When elevel < ERROR or if it cannot be determined to be constant, the
original behavior is maintained.
Author: David Rowley
Reviewed-by: Andres Freund, Peter Eisentraut
Discussion: https://postgr.es/m/CAApHDvrVpasrEzLL2er7p9iwZFZ%3DJj6WisePcFeunwfrV0js_A%40mail.gmail.com
A few sanity checks in funcapi.c were not mentioning all the possible
clauses for failure, confusing developers who fat-fingered catalog data
additions. Make the errors more detailed to avoid wasting time in
pinpointing mistakes.
Per complaint from Craig Ringer.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMsr+YH7Kd87A3cU5m_wKo46HPQ46zFv5wesFNL0YWxkGhGv3g@mail.gmail.com
Since we're assuming IEEE floats these days, there seems little
reason not to do this. It has the advantage that when the slope is
computed as infinite due to the presence of Inf coordinates, we get
saner behavior than before from line_construct(), and thence also
in some dependent operations such as finding the closest point.
Also fix line_construct() to special-case slope zero. The previous
coding got the right answer in most cases, but it could compute
C as NaN when the point has Inf coordinates.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
"FPeq(infinity, infinity)" returned false, on account of getting NaN
when it subtracts the two inputs. Fix that by adding a separate
check for exact equality.
FPle() and FPge() similarly got the wrong answer for two like-signed
infinities. In those cases, we can just rearrange the comparisons
to avoid potentially subtracting infinities.
While the sibling functions FPne() etc accidentally gave the right
answers even with the internal NaN results, it seems best to make
similar adjustments to them to avoid depending on this.
FPeq() has to be converted to an inline function to avoid double
evaluations of its arguments, and I did the same for the others
just for consistency.
In passing, make the handling of NaN cases in line_eq() and
point_eq_point() simpler and easier to reason about, and perhaps
faster.
This results in just one visible regression test change: slope()
now gives DBL_MAX for two inputs of (inf,1e300), which is consistent
with what it does for (1e300,inf), so that seems like a bug fix.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Buildfarm members that lack both HAVE_LOCALE_T and USE_ICU have been
complaining about pg_newlocale_from_collation's collcollate variable.
This is evidently fallout from commit 7d1297df0, which removed the
only usage outside those two #ifdef'd code paths. Mark the variable
pg_attribute_unused(), like its sibling collctype, which has been that
way for a long time.
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Commit 257836a7 included an assertion that a version lookup routine is
not trying to look up "C" or "POSIX", but that case is reachable with
the user-facing SQL function pg_collation_actual_version(). Remove the
assertion.
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
This should have been done in the initial commit that made
unix_socket_directories a list as of c9b0cbe. This change allows to
support correctly the case of ALTER SYSTEM, where it is possible to
specify multiple paths as a list, like the following pattern where
flattening is applied to each item:
ALTER SYSTEM SET unix_socket_directories = '/path1', '/path2';
Any parameters specified in postgresql.conf are parsed the same way, so
there is no compatibility change. pg_dump has a hardcoded list of
parameters marked with GUC_LIST_QUOTE, that gets its routine update.
These are reordered alphabetically for clarity.
Author: Ian Lawrence Barwick
Reviewed-by: Peter Eisentraunt, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=iMOtNY6_sUwV=LQVCJ2zgYHBDyNzVfvE5GN3WQ3v9kQg@mail.gmail.com
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Gen_fmgrtab.pl treated aggregate functions the same as other built-in
functions, which is wasteful because there is no real need to have
entries for them in the fmgr_builtins[] table. Suppressing those
entries saves about 3KB in the compiled table on my machine; which
is not a lot but it's not nothing either, considering that that
table is pretty "hot". The only outside code change needed is
that ExecInitWindowAgg() can't be allowed to call fmgr_info_cxt()
on a plain aggregate function. But that saves a few cycles anyway.
Having done that, the aggregate_dummy() function is unreferenced
and might as well be dropped. Using "aggregate_dummy" as the prosrc
value for an aggregate is now just a documentation convention not
something that matters. There was some discussion of using NULL
instead to save a few bytes in pg_proc, but we'd have to remove
prosrc's BKI_FORCE_NOT_NULL marking which doesn't seem a great idea.
Anyway, it's possible there's client-side code that expects to
see "aggregate_dummy" there, so I'm loath to change it without a
strong reason.
Discussion: https://postgr.es/m/533989.1604263665@sss.pgh.pa.us
hash_array_extended() needs to pass PG_GET_COLLATION() to the hash
function of the element type. Otherwise, the hash function of a
collation-aware data type such as text will error out, since the
introduction of nondeterministic collation made hash functions require
a collation, too.
The consequence of this is that before this change, hash partitioning
using an array over text in the partition key would not work.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/32c1fdae-95c6-5dc6-058a-a90330a3b621%40enterprisedb.com
Accept that we can't get versions for such locale names for now. Users
will need to specify the newer language tag format to enable the
collation versioning feature. It's not clear that we can do automatic
conversion from the old style to the new style reliably enough for this
purpose.
Unfortunately, this means that collation versioning probably won't work
for the default collation unless you provide something like en-US at
initdb or CREATE DATABASE time (though, for reasons not yet understood,
it does seem to work on some systems). It'd be nice to find a better
solution, or document this quirk if we settle on it, but this should
unbreak the 3 failing build farm animals in the meantime.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
make_ruledef() and make_viewdef() were coded to cope with possible
null-ness of these columns, but they've been marked BKI_FORCE_NOT_NULL
for some time. So there's not really any need to do more than what
we do for the other columns of pg_rewrite, i.e. just Assert that
we got non-null results.
(There is a school of thought that says Asserts aren't the thing
to do to check for corrupt data, but surely here is not the place
to start if we want such a policy.)
Also, remove long-dead-if-indeed-it-ever-wasn't-dead handling of
an empty actions list in make_ruledef(). That's an error case
and should be treated as such. (DO INSTEAD NOTHING is represented
by a CMD_NOTHING Query, not an empty list; cf transformRuleStmt.)
Kyotaro Horiguchi, some changes by me
Discussion: https://postgr.es/m/CAEudQApoA=tMTic6xEPYP_hsNZ8XtToVThK_0x7D_aFQYowq3w@mail.gmail.com
Traditionally, the names of fmgroids.h macros for pg_proc OIDs
have been constructed from the prosrc field. But sometimes the
same C function underlies multiple pg_proc entries, forcing us
to make an arbitrary choice of which OID to reference; the other
entries are then not namable via fmgroids.h. Moreover, we could
not have macros at all for pg_proc entries that aren't for
C-coded functions.
Instead, use the proname field, and append the proargtypes field
(replacing inter-argument spaces with underscores) if proname is
not unique. Special-casing unique entries such as F_OIDEQ removes
the need to change a lot of code. Indeed, I can only find two
places in the tree that need to be adjusted; while this changes
quite a few existing entries in fmgroids.h, few of them are
referenced from C code.
With this patch, all entries in pg_proc.dat have macros in fmgroids.h.
Discussion: https://postgr.es/m/472274.1604258384@sss.pgh.pa.us
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
On the same reasoning as in commit 36b931214, forbid using custom
oid_symbol macros in pg_type as well as pg_proc, so that we always
rely on the predictable macro names generated by genbki.pl.
We do continue to grant grandfather status to the names CASHOID and
LSNOID, although those are now considered deprecated aliases for the
preferred names MONEYOID and PG_LSNOID. This is because there's
likely to be client-side code using the old names, and this bout of
neatnik-ism doesn't quite seem worth breaking client code.
There might be a case for grandfathering EVTTRIGGEROID, too, since
externally-maintained PLs may reference that symbol. But renaming
such references to EVENT_TRIGGEROID doesn't seem like a particularly
heavy lift --- we make far more significant backend API changes in
every major release. For now I didn't add that, but we could
reconsider if there's pushback.
The other names changed here seem pretty unlikely to have any outside
uses. Again, we could add alias macros if there are complaints, but
for now I didn't.
As before, no need for a catversion bump.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
We have a perfectly good convention for OID macros for built-in functions
already, so making custom symbols is just introducing unnecessary
deviation from the convention. Remove the one case that had snuck in,
and add an error check in genbki.pl to discourage future instances.
Although this touches pg_proc.dat, there's no need for a catversion
bump since the actual catalog data isn't changed.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
This makes use of CheckBuffer() introduced in c780a7a, adding a SQL
wrapper able to do checks for all the pages of a relation. By default,
all the fork types of a relation are checked, and it is possible to
check only a given relation fork. Note that if the relation given in
input has no physical storage or is temporary, then no errors are
generated, allowing full-database checks when coupled with a simple scan
of pg_class for example. This is not limited to clusters with data
checksums enabled, as clusters without data checksums can still apply
checks on pages using the page headers or for the case of a page full of
zeros.
This function returns a set of tuples consisting of:
- The physical file where a broken page has been detected (without the
segment number as that can be AM-dependent, which can be guessed from
the block number for heap). A relative path from PGPATH is used.
- The block number of the broken page.
By default, only superusers have an access to this function but
execution rights can be granted to other users.
The feature introduced here is still minimal, and more improvements
could be done, like:
- Addition of a start and end block number to run checks on a range
of blocks, which would apply only if one fork type is checked.
- Addition of some progress reporting.
- Throttling, with configuration parameters in function input or
potentially some cost-based GUCs.
Regression tests are added for positive cases in the main regression
test suite, and TAP tests are added for cases involving the emulation of
page corruptions.
Bump catalog version.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada, Justin Pryzby
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
Change the attribute 'name' to 'slot_name' in pg_stat_replication_slots
view to make it clear and that way we will be consistent with the other
places like pg_stat_wal_receiver view where we display the same attribute.
In the passing, fix the typo in one of the macros in the related code.
Bump the catversion as we have modified the name in the catalog as well.
Reported-by: Noriyoshi Shinoda
Author: Noriyoshi Shinoda
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
The prohibitValueChange code paths in set_config_option(), which
are executed whenever we re-read a PGC_POSTMASTER variable from
postgresql.conf, neglected to free anything before exiting. Thus
we'd leak the proposed new value of a PGC_STRING variable, as noted
by BoChen in bug #16666. For all variable types, if the check hook
creates an "extra" chunk, we'd also leak that.
These are malloc not palloc chunks, so there is no mechanism for
recovering the leaks before process exit. Fortunately, the values
are typically not very large, meaning you'd have to go through an
awful lot of SIGHUP configuration-reload cycles to make the leakage
amount to anything. Still, for a long-lived postmaster process it
could potentially be a problem.
Oversight in commit 2594cf0e8. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16666-2c41a4eec61b03e1@postgresql.org
Up to now, only ECONNRESET (and EPIPE, in most but not quite all places)
received special treatment in our error handling logic. This patch
changes things so that related error codes such as ECONNABORTED are
also recognized as indicating that the connection's dead and unlikely
to come back.
We continue to think, however, that only ECONNRESET and EPIPE should be
reported as probable server crashes; the other cases indicate network
connectivity problems but prove little about the server's state. Thus,
there's no change in the error message texts that are output for such
cases. The key practical effect is that errcode_for_socket_access()
will report ERRCODE_CONNECTION_FAILURE rather than
ERRCODE_INTERNAL_ERROR for a network failure. It's expected that this
will fix buildfarm member lorikeet's failures since commit 32a9c0bdf,
as that seems to be due to not treating ECONNABORTED equivalently to
ECONNRESET.
The set of errnos treated this way now includes ECONNABORTED, EHOSTDOWN,
EHOSTUNREACH, ENETDOWN, ENETRESET, and ENETUNREACH. Several of these
were second-class citizens in terms of their handling in places like
get_errno_symbol(), so upgrade the infrastructure where necessary.
As committed, this patch assumes that all these symbols are defined
everywhere. POSIX specifies all of them except EHOSTDOWN, but that
seems to exist on all platforms of interest; we'll see what the
buildfarm says about that.
Probably this should be back-patched, but let's see what the buildfarm
thinks of it first.
Fujii Masao and Tom Lane
Discussion: https://postgr.es/m/2621622.1602184554@sss.pgh.pa.us
Multiply before dividing, not the reverse, so that cases that should
produce exact results do produce exact results. (width_bucket_float8
got this right already.) Even when the result is inexact, this avoids
making it more inexact, since only the division step introduces any
imprecision.
While at it, fix compute_bucket() to not uselessly repeat the sign
check already done by its caller, and avoid duplicating the
multiply/divide steps by adjusting variable usage.
Per complaint from Martin Visser. Although this seems like a bug fix,
I'm hesitant to risk changing width_bucket()'s results in stable
branches, so no back-patch.
Discussion: https://postgr.es/m/6FA5117D-6AED-4656-8FEF-B74AC18FAD85@brytlyt.com
While the calculation is not well-defined if the bounds arguments are
infinite, there is a perfectly sane outcome if the test operand is
infinite: it's just like any other value that's before the first bucket
or after the last one. width_bucket_float8() got this right, but
I was too hasty about the case when adding infinities to numerics
(commit a57d312a7), so that width_bucket_numeric() just rejected it.
Fix that, and sync the relevant error message strings.
No back-patch needed, since infinities-in-numeric haven't shipped yet.
Discussion: https://postgr.es/m/2465409.1602170063@sss.pgh.pa.us
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
The date-vs-timestamp, date-vs-timestamptz, and timestamp-vs-timestamptz
comparators all worked by promoting the first type to the second and
then doing a simple same-type comparison. This works fine, except
when the conversion result is out of range, in which case we throw an
entirely avoidable error. The sources of such failures are
(a) type date can represent dates much farther in the future than
the timestamp types can;
(b) timezone rotation might cause a just-in-range timestamp value to
become a just-out-of-range timestamptz value.
Up to now we just ignored these corner-case issues, but now we have
an actual user complaint (bug #16657 from Huss EL-Sheikh), so let's
do something about it.
It turns out that commit 52ad1e659 already built all the necessary
infrastructure to support error-free comparisons, but neglected to
actually use it in the main-line code paths. Fix that, do a little
bit of code style review, and remove the now-duplicate logic in
jsonpath_exec.c.
Back-patch to v13 where 52ad1e659 came in. We could take this back
further by back-patching said infrastructure, but given the small
number of complaints so far, I don't feel a great need to.
Discussion: https://postgr.es/m/16657-cde2f876d8cc7971@postgresql.org
This should help to identify what happened when studying the postmaster
log after-the-fact.
While here, clean up some old comments in the same function.
Discussion: https://postgr.es/m/1568983.1601845687@sss.pgh.pa.us
Unlike for functions, OUT parameters for procedures are part of the
signature. Therefore, they have to be listed in pg_proc.proargtypes
as well as mentioned in ALTER PROCEDURE and DROP PROCEDURE.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2b8490fe-51af-e671-c504-47359dc453c5@2ndquadrant.com
The BKI file's string quoting conventions were previously quite weird,
perhaps as a result of repurposing a function built to scan
single-quoted strings to scan double-quoted ones. Change to use the
same rules as we use in GUC files, allowing some simplifications in
genbki.pl and initdb.c.
While at it, completely remove the backend's scanstr() function, which
was essentially a duplicate of the string dequoting code in guc-file.l.
Instead export that one (under a less generic name than it had) and let
bootscanner.l use it. Now we can clarify that scansup.c exists only to
support the main lexer. We could alternatively have removed GUC_scanstr,
but this way seems better since the previous arrangement could mislead
a reader into thinking that scanstr() had something to do with the main
lexer's handling of string literals. Maybe it did once, but if so it
was a long time ago.
This patch does not bump catversion, since the initially-installed
catalog contents don't change. Note however that successful initdb
after applying this patch will require up-to-date postgres.bki as well
as postgres and initdb executables.
In passing, remove a bunch of very-long-obsolete #include's in
bootparse.y and bootscanner.l.
John Naylor
Discussion: https://postgr.es/m/CACPNZCtDpd18T0KATTmCggO2GdVC4ow86ypiq5ENff1VnauL8g@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Previously we threw an error. But make_date already allowed the case,
so it is inconsistent as well as unhelpful for make_timestamp not to.
Both functions continue to reject year zero.
Code and test fixes by Peter Eisentraut, doc changes by me
Discussion: https://postgr.es/m/13c0992c-f15a-a0ca-d839-91d3efd965d9@2ndquadrant.com
The SQL standard doesn't require jsonpath .datetime() method to support the
ISO 8601 format. But our to_json[b]() functions convert timestamps to text in
the ISO 8601 format in the sake of compatibility with javascript. So, we add
support of the ISO 8601 to the jsonpath .datetime() in the sake compatibility
with to_json[b]().
The standard mode of datetime parsing currently supports just template patterns
and separators in the format string. In order to implement ISO 8601, we have to
add support of the format string double quotes to the standard parsing mode.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Backpatch-through: 13
bffe1bd684 has introduced jsonpath .datetime() method, but default formats
for time and timestamp contain excess space between time and timezone. This
commit removes this excess space making behavior of .datetime() method
standard-compliant.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov
Backpatch-through: 13
We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
SQL operations such as CURRENT_DATE, CURRENT_TIME, LOCALTIME, and
conversion of "now" in a datetime input string have to obtain the
transaction start timestamp ("now()") as a broken-down struct pg_tm.
This is a remarkably expensive conversion, and since now() does not
change intra-transaction, it doesn't really need to be done more than
once per transaction. Introducing a simple cache provides visible
speedups in queries that compute these values many times, for example
insertion of many rows that use a default value of CURRENT_DATE.
Peter Smith, with a bit of kibitzing by me
Discussion: https://postgr.es/m/CAHut+Pu89TWjq530V2gY5O6SWi=OEJMQ_VHMt8bdZB_9JFna5A@mail.gmail.com
When commit bd3daddaf introduced AlternativeSubPlans, I had some
ambitions towards allowing the choice of subplan to change during
execution. That has not happened, or even been thought about, in the
ensuing twelve years; so it seems like a failed experiment. So let's
rip that out and resolve the choice of subplan at the end of planning
(in setrefs.c) rather than during executor startup. This has a number
of positive benefits:
* Removal of a few hundred lines of executor code, since
AlternativeSubPlans need no longer be supported there.
* Removal of executor-startup overhead (particularly, initialization
of subplans that won't be used).
* Removal of incidental costs of having a larger plan tree, such as
tree-scanning and copying costs in the plancache; not to mention
setrefs.c's own costs of processing the discarded subplans.
* EXPLAIN no longer has to print a weird (and undocumented)
representation of an AlternativeSubPlan choice; it sees only the
subplan actually used. This should mean less confusion for users.
* Since setrefs.c knows which subexpression of a plan node it's
working on at any instant, it's possible to adjust the estimated
number of executions of the subplan based on that. For example,
we should usually estimate more executions of a qual expression
than a targetlist expression. The implementation used here is
pretty simplistic, because we don't want to expend a lot of cycles
on the issue; but it's better than ignoring the point entirely,
as the executor had to.
That last point might possibly result in shifting the choice
between hashed and non-hashed EXISTS subplans in a few cases,
but in general this patch isn't meant to change planner choices.
Since we're doing the resolution so late, it's really impossible
to change any plan choices outside the AlternativeSubPlan itself.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/1992952.1592785225@sss.pgh.pa.us
The previous coding was confused about whether head_timestamp was
intended to represent the timestamp for the newest bucket in the
mapping or the oldest timestamp for the oldest bucket in the mapping.
Decide that it's intended to be the oldest one, and repair
accordingly.
To do that, we need to do two things. First, when advancing to a
new bucket, don't categorically set head_timestamp to the new
timestamp. Do this only if we're blowing out the map completely
because a lot of time has passed since we last maintained it. If
we're replacing entries one by one, advance head_timestamp by
1 minute for each; if we're filling in unused entries, don't
advance head_timestamp at all.
Second, fix the computation of how many buckets we need to advance.
The previous formula would be correct if head_timestamp were the
timestamp for the new bucket, but we're now making all the code
agree that it's the timestamp for the oldest bucket, so adjust the
formula accordingly.
This is certainly a bug fix, but I don't feel good about
back-patching it without the introspection tools added by commit
aecf5ee2bb, and perhaps also some
actual tests. Since back-patching the introspection tools might
not attract sufficient support and since there are no automated
tests of these fixes yet, I'm just committing this to master for
now.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
This makes it possible for code outside snapmgr.c to examine the
contents of this data structure. This commit does not add any code
which actually does so; a subsequent commit will make that change.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
This completes the project of making all our derived files be
pgindent-clean (or else explicitly excluded from indentation),
so that no surprises result when running pgindent in a built-out
development tree.
Discussion: https://postgr.es/m/79ed5348-be7a-b647-dd40-742207186a22@2ndquadrant.com
Commit be0a6666 left behind a comment about the order of some tests that
didn't make sense without the expensive division, and in fact we might
as well change the order to one that fails more cheaply most of the time
as a micro-optimization. Also, remove the "+ 1" applied to max_bucket,
to drop an instruction and match the original behavior. Per review
from Tom Lane.
Discussion: https://postgr.es/m/VI1PR0701MB696044FC35013A96FECC7AC8F62D0%40VI1PR0701MB6960.eurprd07.prod.outlook.com
Since ancient times we have had support for a fill factor (maximum load
factor) to be set for a dynahash hash table, but:
1. It was an integer, whereas for in-memory hash tables interesting
load factor targets are probably somewhere near the 0.75-1.0 range.
2. It was implemented in a way that performed an expensive division
operation that regularly showed up in profiles.
3. We are not aware of anyone ever having used a non-default value.
Therefore, remove support, effectively fixing it at 1.
Author: Jakub Wartak <Jakub.Wartak@tomtom.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/VI1PR0701MB696044FC35013A96FECC7AC8F62D0%40VI1PR0701MB6960.eurprd07.prod.outlook.com
Up to now, if you tried to omit "AS" before a column label in a SELECT
list, it would only work if the column label was an IDENT, that is not
any known keyword. This is rather unfriendly considering that we have
so many keywords and are constantly growing more. In the wake of commit
1ed6b8956 it's possible to improve matters quite a bit.
We'd originally tried to make this work by having some of the existing
keyword categories be allowed without AS, but that didn't work too well,
because each category contains a few special cases that don't work
without AS. Instead, invent an entirely orthogonal keyword property
"can be bare column label", and mark all keywords that way for which
we don't get shift/reduce errors by doing so.
It turns out that of our 450 current keywords, all but 39 can be made
bare column labels, improving the situation by over 90%. This number
might move around a little depending on future grammar work, but it's
a pretty nice improvement.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
In the particular case of GRANTED BY, this is specified in the SQL
standard. Since in PostgreSQL, CURRENT_ROLE is equivalent to
CURRENT_USER, and CURRENT_USER is already supported here, adding
CURRENT_ROLE is trivial. The other cases are PostgreSQL extensions,
but for the same reason it also makes sense there.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Asif Rehman <asifr.rehman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/f2feac44-b4c5-f38f-3699-2851d6a76dc9%402ndquadrant.com
This adds a new optional support function to the GiST access method:
sortsupport. If it is defined, the GiST index is built by sorting all data
to the order defined by the sortsupport's comparator function, and packing
the tuples in that order to GiST pages. This is similar to how B-tree
index build works, and is much faster than inserting the tuples one by
one. The resulting index is smaller too, because the pages are packed more
tightly, upto 'fillfactor'. The normal build method works by splitting
pages, which tends to lead to more wasted space.
The quality of the resulting index depends on how good the opclass-defined
sort order is. A good order preserves locality of the input data.
As the first user of this facility, add 'sortsupport' function to the
point_ops opclass. It sorts the points in Z-order (aka Morton Code), by
interleaving the bits of the X and Y coordinates.
Author: Andrey Borodin
Reviewed-by: Pavel Borisov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/1A36620E-CAD8-4267-9067-FB31385E7C0D%40yandex-team.ru
We decided that the policy established in commit 7634bd4f6 for
the bgwriter, checkpointer, walwriter, and walreceiver processes,
namely that they should accept SIGQUIT at all times, really ought
to apply uniformly to all postmaster children. Therefore, get
rid of the duplicative and inconsistent per-process code for
establishing that signal handler and removing SIGQUIT from BlockSig.
Instead, make InitPostmasterChild do it.
The handler set up by InitPostmasterChild is SignalHandlerForCrashExit,
which just summarily does _exit(2). In interactive backends, we
almost immediately replace that with quickdie, since we would prefer
to try to tell the client that we're dying. However, this patch is
changing the behavior of autovacuum (both launcher and workers), as
well as walsenders. Those processes formerly also used quickdie,
but AFAICS that was just mindless copy-and-paste: they don't have
any interactive client that's likely to benefit from being told this.
The stats collector continues to be an outlier, in that it thinks
SIGQUIT means normal exit. That should probably be changed for
consistency, but there's another patch set where that's being
dealt with, so I didn't do so here.
Discussion: https://postgr.es/m/644875.1599933441@sss.pgh.pa.us
Previously, it was based on nBlocksAllocated to account for tapes with
open write buffers that may not have made it to the BufFile yet.
That was unnecessary, because callers do not need to get the number of
blocks while a tape has an open write buffer; and it also conflicted
with the preallocation logic added for HashAgg.
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/ce5af05900fdbd0e9185747825a7423c48501964.camel@j-davis.com
Backpatch-through: 13
Introduced in 0aa8f7640.
MSVC warned about performing 32-bit bit shifting when it appeared like we
might like a 64-bit result. We did, but it just so happened that none of
the calls to this function could have caused the 32-bit shift to overflow.
Here we just cast the constant to int64 to make the compiler happy.
Discussion: https://postgr.es/m/CAApHDvofA_vsrpC13mq_hZyuye5B-ssKEaer04OouXYCO5-uXQ@mail.gmail.com
Move applicable code out of RelationBuildDesc(), which nailed relations
bypass. Non-assert builds experienced no known problems. Back-patch to
v13, where commit c6b92041d3 introduced
rd_firstRelfilenodeSubid.
Kyotaro Horiguchi. Reported by Justin Pryzby.
Discussion: https://postgr.es/m/20200907023737.GA7158@telsasoft.com
This essentially reverts a micro-optimization I made years ago,
as part of the much larger commit d72f6c750. It's doubtful
that there was any hard evidence for it being helpful even then,
and the case is even more dubious now that modern compilers
are so much smarter about inlining memset().
The proximate reason for undoing it is to get rid of the type punning
inherent in MemSet, for fear that that may cause problems now that
we're applying additional optimization switches to numeric.c.
At the very least this'll silence some warnings from a few old
buildfarm animals.
(It's probably past time for another look at whether MemSet is still
worth anything at all, but I do not propose to tackle that question
right now.)
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Experimentation shows that clang will auto-vectorize the critical
multiplication loop if the termination condition is written "i2 < limit"
rather than "i2 <= limit". This seems unbelievably stupid, but I've
reproduced it on both clang 9.0.1 (RHEL8) and 11.0.3 (macOS Catalina).
gcc doesn't care, so tweak the code to do it that way.
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Compile numeric.c with -ftree-vectorize where available, and adjust
the innermost loop of mul_var() so that it is amenable to being
auto-vectorized. (Mainly, that involves making it process the arrays
left-to-right not right-to-left.)
Applying -ftree-vectorize actually makes numeric.o smaller, at least
with my compiler (gcc 8.3.1 on x86_64), and it's a little faster too.
Independently of that, fixing the inner loop to be vectorizable also
makes things a bit faster. But doing both is a huge win for
multiplications with lots of digits. For me, the numeric regression
test is the same speed to within measurement noise, but numeric_big
is a full 45% faster.
We also looked into applying -funroll-loops, but that makes numeric.o
bloat quite a bit, and the additional speed improvement is very
marginal.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
This splits a string at occurrences of a delimiter. It is exactly like
string_to_array() except for producing a set of values instead of an
array of values. Thus, the relationship of these two functions is
the same as between regexp_split_to_table() and regexp_split_to_array().
Although the same results could be had from unnest(string_to_array()),
this is somewhat faster than that, and anyway it seems reasonable to
have it for symmetry with the regexp functions.
Pavel Stehule, reviewed by Peter Smith
Discussion: https://postgr.es/m/CAFj8pRD8HOpjq2TqeTBhSo_QkzjLOhXzGCpKJ4nCs7Y9SQkuPw@mail.gmail.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
Allow BufFile to support temporary files that can be used by the single
backend when the corresponding files need to be survived across the
transaction and need to be opened and closed multiple times. Such files
need to be created as a member of a SharedFileSet.
Additionally, this commit implements the interface for BufFileTruncate to
allow files to be truncated up to a particular offset and extends the
BufFileSeek API to support the SEEK_END case. This also adds an option to
provide a mode while opening the shared BufFiles instead of always opening
in read-only mode.
These enhancements in BufFile interface are required for the upcoming
patch to allow the replication apply worker, to handle streamed
in-progress transactions.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Previously the codes for pg_backend_memory_contexts were in
src/backend/utils/mmgr/mcxt.c. This commit moves them to
src/backend/utils/adt/mcxtfuncs.c so that mcxt.c basically includes
only the low-level interface for memory contexts.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/20200819135545.GC19121@paquier.xyz
This view displays the usages of all the memory contexts of the server
process attached to the current session. This information is useful to
investigate the cause of backend-local memory bloat.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But this technique
cannot be uesd in some environments because no debugger is available there.
And it outputs lots of text messages and it's not easy to analyze them.
So, pg_backend_memory_contexts view allows us to access to backend-local
memory contexts information more easily.
Bump catalog version.
Author: Atsushi Torikoshi, Fujii Masao
Reviewed-by: Tatsuhito Kasahara, Andres Freund, Daniel Gustafsson, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/72a656e0f71d0860161e0b3f67e4d771@oss.nttdata.com
Previous commits made it faster/more scalable to compute snapshots. But not
building a snapshot is still faster. Now that GetSnapshotData() does not
maintain RecentGlobal* anymore, that is actually not too hard:
This commit introduces xactCompletionCount, which tracks the number of
top-level transactions with xids (i.e. which may have modified the database)
that completed in some form since the start of the server.
We can avoid rebuilding the snapshot's contents whenever the current
xactCompletionCount is the same as it was when the snapshot was
originally built. Currently this check happens while holding
ProcArrayLock. While it's likely possible to perform the check without
acquiring ProcArrayLock, it seems better to do that separately /
later, some careful analysis is required. Even with the lock this is a
significant win on its own.
On a smaller two socket machine this gains another ~1.03x, on a larger
machine the effect is roughly double (earlier patch version tested
though). If we were able to safely avoid the lock there'd be another
significant gain on top of that.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c9, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
This is useful for monitoring purposes with log parsing. Similarly to
pg_stat_activity, the leader's PID is shown only for active parallel
workers, minimizing the log footprint for the leaders as the equivalent
shared memory field is set as long as a backend is alive.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier, Julien Rouhaud, Tom Lane
Discussion: https://postgr.es/m/20200315111831.GA21492@telsasoft.com
When reading the code it's not obvious when one should prefer dynahash
over simplehash and vice-versa, so, for programmer-friendliness, add
comments to inform that decision.
Show sample simplehash method signatures.
Author: James Coleman <jtc331@gmail.com>
Discussion: https://postgr.es/m/CAAaqYe_dOF39gAJ8rL-a3YO3Qo96MHMRQ2whFjK5ZcU6YvMQSA%40mail.gmail.com
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
Create an optional region in the main shared memory segment that can be
used to acquire and release "fast" DSM segments, and can benefit from
huge pages allocated at cluster startup time, if configured. Fall back
to the existing mechanisms when that space is full. The size is
controlled by a new GUC min_dynamic_shared_memory, defaulting to 0.
Main region DSM segments initially contain whatever garbage the memory
held last time they were used, rather than zeroes. That change revealed
that DSA areas failed to initialize themselves correctly in memory that
wasn't zeroed first, so fix that problem.
Discussion: https://postgr.es/m/CA%2BhUKGLAE2QBv-WgGp%2BD9P_J-%3Dyne3zof9nfMaqq1h3EGHFXYQ%40mail.gmail.com
Create LatchWaitSet at backend startup time, and use it to implement
WaitLatch(). This avoids repeated epoll/kqueue setup and teardown
system calls.
Reorder SubPostmasterMain() slightly so that we restore the postmaster
pipe and Windows signal emulation before we reach InitPostmasterChild(),
to make this work in EXEC_BACKEND builds.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
It's fairly silly that ignoring NOT subexpressions is TS_execute's
default behavior. It's wrong on its face and it encourages errors
of omission. Moreover, the only two remaining callers that aren't
specifying CALC_NOT are in ts_headline calculations, and it's very
arguable that those are bugs: if you've specified "!foo" in your
query, why would you want to get a headline that includes "foo"?
Hence, rip that out and change the default behavior to be to calculate
NOT accurately. As a concession to the slim chance that there is still
somebody somewhere who needs the incorrect behavior, provide a new
SKIP_NOT flag to explicitly request that.
Back-patch into v13, mainly because it seems better to change this
at the same time as the previous commit's rejiggering of TS_execute
related APIs. Any outside callers affected by this change are
probably also affected by that one.
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Text search sometimes failed to find valid matches, for instance
'!crew:A'::tsquery might fail to locate 'crew:1B'::tsvector during
an index search. The root of the issue is that TS_execute's callback
functions were not changed to use ternary (yes/no/maybe) reporting
when we made the search logic itself do so. It's somewhat annoying
to break that API, but on the other hand we now see that any code
using plain boolean logic is almost certainly broken since the
addition of phrase search. There seem to be very few outside callers
of this code anyway, so we'll just break them intentionally to get
them to adapt.
This allows removal of tsginidx.c's private re-implementation of
TS_execute, since that's now entirely duplicative. It's also no
longer necessary to avoid use of CALC_NOT in tsgistidx.c, since
the underlying callbacks can now do something reasonable.
Back-patch into v13. We can't change this in stable branches,
but it seems not quite too late to fix it in v13.
Tom Lane and Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Add infinities that behave the same as they do in the floating-point
data types. Aside from any intrinsic usefulness these may have,
this closes an important gap in our ability to convert floating
values to numeric and/or replace float-based APIs with numeric.
The new values are represented by bit patterns that were formerly
not used (although old code probably would take them for NaNs).
So there shouldn't be any pg_upgrade hazard.
Patch by me, reviewed by Dean Rasheed and Andrew Gierth
Discussion: https://postgr.es/m/606717.1591924582@sss.pgh.pa.us
convutils.pm used implicit conversion of undefined value to integer
zero. Some of conversion scripts are susceptible to regexp greediness.
Fix, avoiding whitespace changes in the output. Also update ICU URLs
that moved.
No need to back-patch, because the output of these scripts is also in
the source tree so we shouldn't need to rerun them on back-branches.
Author: Kyotaro Horiguchi <horikyoga.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ7SEGLbj%3D%3DTQCcyKRA9aqj8%2B6L%3DexSq1y25TA%3DWxLziQ%40mail.gmail.com
Since commit 044c99bc5, eqjoinsel passes the passed-in collation
to any operators it invokes. However, neqjoinsel failed to pass
on whatever collation it got, so that if we invoked a
collation-dependent operator via that code path, we'd get "could not
determine which collation to use for string comparison" or the like.
Per report from Justin Pryzby. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20200721191606.GL5748@telsasoft.com
Rather than always insisting on an exact match of the type OID in the
data to the element type or column type we expect, complain only when
both OIDs fall within the manually-assigned range. This acknowledges
the reality that user-defined types don't have stable OIDs, while
still preserving some of the mistake-detection value of the old test.
(It's not entirely clear whether to error if one OID is manually
assigned and the other isn't. But perhaps that case could arise in
cross-version cases where a former extension type has been imported
into core, so I let it pass.)
This change allows us to remove the prohibition on binary transfer
of user-defined arrays and composites in the recently-landed support
for binary logical replication (commit 9de77b545). We can just
unconditionally drop that check, since if the client has asked for
binary transfer it must be >= v14 and must have this change.
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
Many situations where the offset is infinity were not handled sanely.
We should generally allow the val versus base +/- offset comparison to
proceed according to the normal rules of IEEE arithmetic; however, we
must do something special for the corner cases where base +/- offset
would produce NaN due to subtracting two like-signed infinities.
That corresponds to asking which values infinitely precede +inf or
infinitely follow -inf, which should certainly be true of any finite
value or of the opposite-signed infinity. After some discussion it
seems that the best decision is to make it true of the same-signed
infinity as well, ie, just return constant TRUE if the calculation
would produce a NaN.
(We could write this with a bit less code by subtracting anyway,
and then checking for a NaN result. However, I prefer this
formulation because it'll be easier to transpose into numeric.c.)
Although this seems like clearly a bug fix with respect to finite
values, it is less obviously correct for infinite values. Between
that and the fact that the whole issue only arises for very strange
window specifications (e.g. RANGE BETWEEN 'inf' PRECEDING AND 'inf'
PRECEDING), I'll desist from back-patching.
Noted by Dean Rasheed.
Discussion: https://postgr.es/m/3393130.1594925893@sss.pgh.pa.us
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
There was no easy way to find how many times generic and custom plans
have been executed for a prepared statement. This commit exposes those
numbers of times in pg_prepared_statements view.
Author: Atsushi Torikoshi, Kyotaro Horiguchi
Reviewed-by: Tatsuro Yamada, Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/CACZ0uYHZ4M=NZpofH6JuPHeX=__5xcDELF8hT8_2T+R55w4RQw@mail.gmail.com
When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
This introduces a new set of extended routines for procedure and
operator name lookups, with a flag bitmask argument that can modify the
result. The following options are available:
- Force schema qualification, ignoring search_path. This is similar to
the existing option for format_{operator|procedure}_qualified().
- Force NULL as result instead of a numeric OID for an undefined
object. This option is new.
This is a refactoring similar to 1185c78, that will be used for a future
patch to improve the SQL functions providing information using object
addresses for undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
If a type scanned is undefined, type format routines have two behaviors
depending on if FORMAT_TYPE_ALLOW_INVALID is used by the caller or not:
- Issue a cache lookup error
- Return an undefined type name "???", "???[]" or "-"
The current interface is not really helpful for callers willing to
format properly a type name, but still make sure that the type is
defined as there could be types matching the strings generated when
looking for an undefined type, even if that should not be a problem in
practice. In order to counter that, add a new flag called
FORMAT_TYPE_INVALID_AS_NULL that returns a NULL result instead of "???
or "-" which does not generate an error. This flag will be used in a
follow-up patch improving the set of SQL functions showing information
for object addresses when it comes to undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
Do the same for the maintenance_work_mem global variable.
Oversight in commit 848ae330a4, which increased the previous defaults
for work_mem and maintenance_work_mem by 4X.
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
Since %c only passes a C "char" to printf, it's incapable of dealing
with multibyte characters. Passing just the first byte of such a
character leads to an output string that is visibly not correctly
encoded, resulting in undesirable behavior such as encoding conversion
failures while sending error messages to clients.
We've lived with this issue for a long time because it was inconvenient
to avoid in a portable fashion. However, now that we always use our own
snprintf code, it's reasonable to use the %.*s format to print just one
possibly-multibyte character in a string. (We previously avoided that
obvious-looking answer in order to work around glibc's bug #6530, cf
commits 54cd4f045 and ed437e2b2.)
Hence, run around and fix a bunch of places that used %c to report
a character found in a user-supplied string. For simplicity, I did
not touch places that were emitting non-user-facing debug messages,
or reporting catalog data that should always be ASCII. (It's also
unclear how useful this approach could be in frontend code, where
it's less certain that we know what encoding we're dealing with.)
In passing, improve a couple of poorly-written error messages in
pageinspect/heapfuncs.c.
This is a longstanding issue, but I'm hesitant to back-patch because
of the impact on translatable message strings. In any case this fix
would not work reliably before v12.
Tom Lane and Quan Zongliang
Discussion: https://postgr.es/m/a120087c-4c88-d9d4-1ec5-808d7a7f133d@gmail.com
I failed to notice that we don't really need to check for y being an
integer in the code path where x = -inf; we already did.
Also make some further cosmetic rearrangements in that spot in hopes
of dodging the seeming compiler bug that buildfarm member fossa is
hitting. And be consistent about declaring variables as "float8"
not "double", since the pre-existing variables in this function are
like that.
Discussion: https://postgr.es/m/E1jkyFX-0005RR-1Q@gemulon.postgresql.org
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
Buildfarm results for commit e532b1d57 reveal the error in my thinking
about the unexpected-EDOM case. I'd supposed this was no longer really
a live issue, but it seems the fix for glibc's bug #3866 is not all that
old, and we still have at least one buildfarm animal (lapwing) with the
bug. Hence, resurrect essentially the previous logic (but, I hope, less
opaquely presented), and explain what it is we're really doing here.
Also, blindly try to fix fossa's failure by tweaking the logic that
figures out whether y is an odd integer when x is -inf. This smells
a whole lot like a compiler bug, but I lack access to icc to try to
pin it down. Maybe doing division instead of multiplication will
dodge the issue.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Buildfarm results for commit decbe2bfb show that AIX and illumos
have non-POSIX-compliant pow() functions, as do ancient NetBSD
and HPUX releases. While it's dubious how much we should care
about the latter two platforms, the former two are probably enough
reason to put in manual handling of infinite-input cases. Hence,
do so, and clean up the post-pow() error handling to reflect its
now-more-limited scope. (Notably, while we no longer expect to
ever see EDOM from pow(), report it as a domain error if we do.
The former coding had the net effect of expensively converting the
error to ERANGE, which seems highly questionable: if pow() wanted
to report ERANGE, it would have done so.)
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Previously, these functions tended to throw underflow errors for
negative-infinity exponents. The correct thing per POSIX is to
return 0, so let's do that instead. (Note that the SQL standard
is silent on such issues, as it lacks the concepts of either Inf
or NaN; so our practice is to follow POSIX whenever a corresponding
C-library function exists.)
Also, add a bunch of test cases verifying that exp() and power()
actually do follow POSIX for Inf and NaN inputs. While this patch
should guarantee that exp() passes the tests, power() will not unless
the platform's pow(3) is fully POSIX-compliant. I already know that
gaur fails some of the tests, and I am suspicious that the Windows
animals will too; the extent of compliance of other old platforms
remains to be seen. We might choose to drop failing test cases, or
to work harder at overriding pow(3) for these cases, but first let's
see just how good or bad the situation is.
Discussion: https://postgr.es/m/582552.1591917752@sss.pgh.pa.us
var_samp(numeric) and stddev_samp(numeric) disagreed with their float
cousins about what to do for a single non-null input value that is NaN.
The float versions return NULL on the grounds that the calculation is
only defined for more than one non-null input, which seems like the
right answer. But the numeric versions returned NaN, as a result of
dealing with edge cases in the wrong order. Fix that. The patch
also gets rid of an insignificant memory leak in such cases.
This inconsistency is of long standing, but on the whole it seems best
not to back-patch the change into stable branches; nobody's complained
and it's such an obscure point that nobody's likely to complain.
(Note that v13 and v12 now contain test cases that will notice if we
accidentally back-patch this behavior change in future.)
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
Core by no means makes excessive use of these functions, but quite a large
number of those usages do require the caller to call strlen() on the
returned string. This is quite wasteful since these functions do already
have a good idea of the length of the string, so we might as well just
have them return that.
Reviewed-by: Andrew Gierth
Discussion: https://postgr.es/m/CAApHDvrm2A5x2uHYxsqriO2cUaGcFvND%2BksC9e7Tjep0t2RK_A%40mail.gmail.com
In passing, also remove a few surplus empty lines from pg_ltoa and
pg_ulltoa_n in numutils.c
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y2ou3xuh.fsf@news-spur.riddles.org.uk
Backpatch-through: 13, where these changes were introduced
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
The previous description string still described the pre-PostgreSQL
10 (pre eb61136dc7) behavior of
selecting between encrypted and unencrypted, but it is now choosing
between encryption algorithms.
Commit 24d85952 made a change that indirectly caused a performance
regression by triggering a change in the way GCC optimizes memcpy() on
some platforms.
The behavior seemed to contradict a GCC document, so I filed a report:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95556
This patch implements a narrow workaround which eliminates the
regression I observed. The workaround is benign enough that it seems
unlikely to cause a different regression on another platform.
Discussion: https://postgr.es/m/99b2eab335c1592c925d8143979c8e9e81e1575f.camel@j-davis.com
ineq_histogram_selectivity() can be invoked in situations where the
ordering we care about is not that of the column's histogram. We could
be considering some other collation, or even more drastically, the
query operator might not agree at all with what was used to construct
the histogram. (We'll get here for anything using scalarineqsel-based
estimators, so that's quite likely to happen for extension operators.)
Up to now we just ignored this issue and assumed we were dealing with
an operator/collation whose sort order exactly matches the histogram,
possibly resulting in junk estimates if the binary search gets confused.
It's past time to improve that, since the use of nondefault collations
is increasing. What we can do is verify that the given operator and
collation match what's recorded in pg_statistic, and use the existing
code only if so. When they don't match, instead execute the operator
against each histogram entry, and take the fraction of successes as our
selectivity estimate. This gives an estimate that is probably good to
about 1/histogram_size, with no assumptions about ordering. (The quality
of the estimate is likely to degrade near the ends of the value range,
since the two orderings probably don't agree on what is an extremal value;
but this is surely going to be more reliable than what we did before.)
At some point we might further improve matters by storing more than one
histogram calculated according to different orderings. But this code
would still be good fallback logic when no matches exist, so that is
not an argument for not doing this.
While here, also improve get_variable_range() to deal more honestly
with non-default collations.
This isn't back-patchable, because it requires adding another argument
to ineq_histogram_selectivity, and because it might have significant
impact on the estimation results for extension operators relying on
scalarineqsel --- mostly for the better, one hopes, but in any case
destabilizing plan choices in back branches is best avoided.
Per investigation of a report from James Lucas.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/20200520125807.GB296739@msg.df7cb.de
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
A relation that has no storage initializes rd_tableam to NULL, which
caused those two functions to crash because of a pointer dereference.
Note that in 11 and older versions, this has always failed with a
confusing error "could not open file".
These two functions are used by the Postgres ODBC driver, which requires
them only when connecting to a backend strictly older than 8.1. When
connected to 8.2 or a newer version, the driver uses a RETURNING clause
instead whose support has been added in 8.2, so it should be possible to
just remove both functions in the future. This is left as an issue to
address later.
While on it, add more regression tests for those functions as we never
really had coverage for them, and for aggregates of TIDs.
Reported-by: Jaime Casanova, via sqlsmith
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAJGNTeO93u-5APMga6WH41eTZ3Uee9f3s8dCpA-GSSqNs1b=Ug@mail.gmail.com
Backpatch-through: 12
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
Disk-based HashAgg relies on writing to multiple tapes
concurrently. Avoid fragmentation of the tapes' blocks by
preallocating many blocks for a tape at once. No file operations are
performed during preallocation; only the block numbers are reserved.
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
It's just weird that this name wasn't chosen to look like an
identifier. The suspicion that it wasn't thought about too
hard is reinforced by the fact that it wasn't documented in
the pg_locks view (until I did so, a day or two back).
Update, and add a comment reminding future adjusters of this
array to fix the docs too.
Do some desultory wordsmithing on various entries in the wait
events tables.
Discussion: https://postgr.es/m/24595.1589326879@sss.pgh.pa.us
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
This commit changes pg_stat_get_slru() so that it uses
TimestampTzGetDatum() for stats_reset field because that field
stores the timestamp with time zone value. Previously
Int64GetDatum() was used.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/b8784fe6-1401-ab35-aa14-d57b5bb8e312@oss.nttdata.com
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
In the footsteps of aaf069aa3, remove ACLDEBUG, which was the only
other remaining undocumented symbol in pg_config_manual.h. The fact
that nobody had bothered to document it in seventeen years is a good
clue to its usefulness. In practice, none of the tracing logic it
enabled would be of any value without additional effort.
Discussion: https://postgr.es/m/6631.1587565046@sss.pgh.pa.us
Nobody really uses this stuff, especially not since we created
valgrind-based infrastructure that does the same thing better.
It is thus unsurprising that the generation.c and slab.c versions
were actually broken. Rather than fix 'em, let's just remove 'em.
Alexander Lakhin
Discussion: https://postgr.es/m/8936216c-3492-3f6e-634b-d638fddc5f91@gmail.com
Working on commit 1c455078b led me to check through FunctionCallInvoke
call sites to see if every one was being honest about (a) making sure
that fcinfo.isnull is initially false, and (b) checking its state after
the call. Sure enough, I found some violations.
The main one is that finalize_partialaggregate re-used serialfn_fcinfo
without resetting isnull, even though it clearly intends to cater for
serialfns that return NULL. There would only be an issue with a
non-strict serialfn, since it's unlikely that a serialfn would return
NULL for non-null input. We have no non-strict serialfns in core, and
there may be none in the wild either, which would account for the lack
of complaints. Still, it's clearly wrong, so back-patch that fix to
9.6 where finalize_partialaggregate was introduced.
Also, arrayfuncs.c and rowtypes.c contained various callers that were
not bothering to check for result nulls. While what's being called is
a comparison or hash function that probably *shouldn't* return null,
that's a lousy excuse for not having any check at all. There are
existing places that just Assert(!fcinfo->isnull) in comparable
situations, so I added that to the places that were calling btree
comparison or hash support functions. In the places calling
boolean-returning equality functions, it's quite cheap to have them
treat isnull as FALSE, so make those places do that. Also remove some
"locfcinfo->isnull = false" assignments that are unnecessary given the
assumption that no previous call returned null. These changes seem like
mostly neatnik-ism or debugging support, so I didn't back-patch.
Although selfuncs.c will never call a target operator with null inputs,
some functions might return null anyway. The existing coding will fail
if that happens (since FunctionCall2Coll will punt), which seems
undesirable given that matchingsel() has such a broad range of potential
applicability --- in fact, we already have a problem because we apply it
to jsonb_path_exists_opr, which can return null. Hence, rejigger the
underlying functions mcv_selectivity and histogram_selectivity to cope,
treating a null result as false.
While we are at it, we can move the InitFunctionCallInfoData overhead
out of the inner loops, which isn't a huge number of cycles but might
save something considering we are likely calling functions as cheap
as int4eq(). Plus, the number of loop cycles to be expected is much
more than it was when this code was written, since typical settings
of default_statistics_target are higher.
In view of that consideration, let's apply the same change to
var_eq_const, eqjoinsel_inner, and eqjoinsel_semi. We do not expect
equality functions to ever return null for non-null inputs (and
certainly that code has been that way a long time without complaints),
but the cycle savings seem attractive, especially in the eqjoinsel loops
where there's potentially an O(N^2) savings.
Similar code exists in ineq_histogram_selectivity and
get_variable_range, but I forebore from changing those for now.
The performance argument for changing ineq_histogram_selectivity
is really weak anyway, since that will only iterate log2(N) times.
Nikita Glukhov and Tom Lane
Discussion: https://postgr.es/m/9d3b0959-95d6-c37e-2c0b-287bcfe5c705@postgrespro.ru
The views pg_stat_progress_* had not gotten the memo that
pg_read_all_stats is supposed to be able to read all statistics. Also
make a pass over all text-returning pg_stat_xyz functions that could
return "insufficient privilege" and make sure they also respect
pg_read_all_status.
Reported-by: Andrey M. Borodin
Reviewed-by: Andrey M. Borodin, Kyotaro Horiguchi
Discussion: https://postgr.es/m/13145F2F-8458-4977-9D2D-7B2E862E5722@yandex-team.ru
We've had a mixture of the warnings pragma, the -w switch on the shebang
line, and no warnings at all. This patch removes the -w swicth and add
the warnings pragma to all perl sources missing it. It raises the
severity of the TestingAndDebugging::RequireUseWarnings perlcritic
policy to level 5, so that we catch any future violations.
Discussion: https://postgr.es/m/20200412074245.GB623763@rfd.leadboat.com
To control whether partition changes are replicated using their own
identity and schema or an ancestor's, add a new parameter that can be
set per publication named 'publish_via_partition_root'.
This allows replicating a partitioned table into a different partition
structure on the subscriber.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
2nd pass of modifying various places which obtain the next power
of 2 of a number and make them use the new functions added in
f0705bb62.
In passing, also modify num_combinations(). This can be implemented
using simple bitshifting rather than looping.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
First pass of modifying various places that obtain the next power of 2 of
a number and make them use the new functions added in pg_bitutils.h
instead.
This also removes the _hash_log2() function. There are no longer any
callers in core. Other users can swap their _hash_log2(n) call to make use
of pg_ceil_log2_32(n).
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. Lift that restriction by redeclaring the
bit number arguments as int8 (which requires a catversion bump,
hence is not back-patchable).
The similarly-named functions for bit/varbit don't really have a
problem because we restrict those types to at most VARBITMAXLEN bits;
hence leave them alone.
While here, extend the encode/decode functions in utils/adt/encode.c
to allow dealing with values wider than 1GB. This is not a live bug
or restriction in current usage, because no input could be more than
1GB, and since none of the encoders can expand a string more than 4X,
the result size couldn't overflow uint32. But it might be desirable
to support more in future, so make the input length values size_t
and the potential-output-length values uint64.
Also add some test cases to improve the miserable code coverage
of these functions.
Movead Li, editorialized some by me; also reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
This is for the benefit of running postgres under the rr
debugger. When using rr signal handlers running while a syscall is
active use an alternative stack. As e.g. bgworkers are started from
within signal handlers, the forked backend then has a different stack
base than postmaster. Previously that subsequently lead to those
processes triggering spurious "stack depth limit exceeded" errors.
Discussion: https://postgr.es/m/20200327182217.ubrrl32lyfhxfwk5@alap3.anarazel.de
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
Early versions of opclass options patch uses zero support procedure as opclass
options procedure. This commit removes rudiments of it, which were committed
in 911e702077. Also, it implements correct handling of amoptsprocnum == 0.
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
This commit adds query_string argument into the planner-related functions
and hook and allows us to pass the query string to them.
Currently there is no user of the query string passed. But the upcoming patch
for the planning counters will add the planning hook function into
pg_stat_statements and the function will need the query string. So this change
will be necessary for that patch.
Also this change is useful for some extensions that want to use the query
string in their planner hook function.
Author: Pascal Legrand, Julien Rouhaud
Reviewed-by: Yoshikazu Imai, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAOBaU_bU1m3_XF5qKYtSj1ua4dxd=FWDyh2SH4rSJAUUfsGmAQ@mail.gmail.com
Discussion: https://postgr.es/m/1583789487074-0.post@n3.nabble.com
In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
Instead of using Newton's method to compute numeric square roots, use
the Karatsuba square root algorithm, which performs better for numbers
of all sizes. In practice, this is 3-5 times faster for inputs with
just a few digits and up to around 10 times faster for larger inputs.
Also, the new algorithm guarantees that the final digit of the result
is correctly rounded, since it computes an integer square root with
truncation, containing at least 1 extra decimal digit before rounding.
The former algorithm would occasionally round the wrong way because
it rounded both the intermediate and final results.
In addition, arrange for sqrt_var() to explicitly support negative
rscale values (rounding before the decimal point). This allows the
argument reduction phase of ln_var() to be optimised for large inputs,
since it only needs to compute square roots with a few more digits
than the final ln() result, rather than computing all the digits
before the decimal point. For very large inputs, this can be many
thousands of times faster.
In passing, optimise div_var_fast() in a couple of places where it was
doing unnecessary work.
Patch be me, reviewed by Tom Lane and Tels.
Discussion: https://postgr.es/m/CAEZATCV1A7+jD3P30Zu31KjaxeSEyOn3v9d6tYegpxcq3cQu-g@mail.gmail.com
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Buildfarm experience shows what probably should've occurred to me before:
if a cache flush occurs partway through building a generic plan, then
the plansource may have is_valid = false even though the plan is valid.
We need to accept this case, use the generated plan, and then try to
replan the next time. We can't try to replan immediately, because that
would produce an infinite loop in CLOBBER_CACHE_ALWAYS builds; moreover
it's really overkill. (We can assume that the plan is valid, it's just
possibly a bit stale. Note that the pre-existing code behaved this way,
and the non-simple-expression code paths do too.) Conversely, not using
the generated plan would drop us into the not-a-simple-expression code
path, which is bad for performance and would also cause regression-test
failures due to visibly different error-reporting behavior.
Hence, refactor the validity-check functions so that the initial check
and recheck cases can react differently to plansource->is_valid.
This makes their usage a bit simpler, too.
Discussion: https://postgr.es/m/7072.1585332104@sss.pgh.pa.us
For relatively simple expressions (say, "x + 1" or "x > 0"), plpgsql's
management overhead exceeds the cost of evaluating the expression.
This patch substantially improves that situation, providing roughly
2X speedup for such trivial expressions.
First, add infrastructure in the plancache to allow fast re-validation
of cached plans that contain no table access, and hence need no locks.
Teach plpgsql to use this infrastructure for expressions that it's
already deemed "simple" (which in particular will never contain table
references).
The fast path still requires checking that search_path hasn't changed,
so provide a fast path for OverrideSearchPathMatchesCurrent by
counting changes that have occurred to the active search path in the
current session. This is simplistic but seems enough for now, seeing
that PushOverrideSearchPath is not used in any performance-critical
cases.
Second, manage the refcounts on simple expressions' cached plans using
a transaction-lifespan resource owner, so that we only need to take
and release an expression's refcount once per transaction not once per
expression evaluation. The management of this resource owner exactly
parallels the existing management of plpgsql's simple-expression EState.
Add some regression tests covering this area, in particular verifying
that expression caching doesn't break semantics for search_path changes.
Patch by me, but it owes something to previous work by Amit Langote,
who recognized that getting rid of plancache-related overhead would
be a useful thing to do here. Also thanks to Andres Freund for review.
Discussion: https://postgr.es/m/CAFj8pRDRVfLdAxsWeVLzCAbkLFZhW549K+67tpOc-faC8uH8zw@mail.gmail.com
This reverts the parts of commit 17a28b0364
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Remove the documented restriction that collation providers must either
return NULL for all collations or non-NULL for all collations.
Use NULL for glibc collations like "C.UTF-8", which might otherwise lead
future proposed commits to force unnecessary index rebuilds.
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CA%2BhUKGJvqup3s%2BJowVTcacZADO6dOhfdBmvOPHLS3KXUJu41Jw%40mail.gmail.com
Change all the auxiliary error-reporting routines to return void,
now that we no longer need to pretend they are passing something
useful to errfinish(). While this probably doesn't save anything
significant at the machine-code level, it allows detection of some
additional types of mistakes.
Pass the error location details (__FILE__, __LINE__, PG_FUNCNAME_MACRO)
to errfinish not errstart. This shaves a few cycles off the case where
errstart decides we're not going to emit anything.
Re-implement elog() as a trivial wrapper around ereport(), removing
the separate support infrastructure it used to have. Aside from
getting rid of some now-surplus code, this means that elog() now
really does have exactly the same semantics as ereport(), in particular
that it can skip evaluation work if the message is not to be emitted.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Now that we require C99, we can depend on __VA_ARGS__ to work, and
revising ereport() to use it has several significant benefits:
* The extra parentheses around the auxiliary function calls are now
optional. Aside from being a bit less ugly, this removes a common
gotcha for new contributors, because in some cases the compiler errors
you got from forgetting them were unintelligible.
* The auxiliary function calls are now evaluated as a comma expression
list rather than as extra arguments to errfinish(). This means that
compilers can be expected to warn about no-op expressions in the list,
allowing detection of several other common mistakes such as forgetting
to add errmsg(...) when converting an elog() call to ereport().
* Unlike the situation with extra function arguments, comma expressions
are guaranteed to be evaluated left-to-right, so this removes platform
dependency in the order of the auxiliary function calls. While that
dependency hasn't caused us big problems in the past, this change does
allow dropping some rather shaky assumptions around errcontext() domain
handling.
There's no intention to make wholesale changes of existing ereport
calls, but as proof-of-concept this patch removes the extra parens
from a couple of calls in postgres.c.
While new code can be written either way, code intended to be
back-patched will need to use extra parens for awhile yet. It seems
worth back-patching this change into v12, so as to reduce the window
where we have to be careful about that by one year. Hence, this patch
is careful to preserve ABI compatibility; a followup HEAD-only patch
will make some additional simplifications.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
All errors of SQLSTATE class 23 should include the name of an object
associated with the error in separate fields of the error report message.
We do this so that applications need not try to extract them from the
possibly-localized human-readable text of the message.
Reported-by: Chris Bandy
Author: Chris Bandy
Reviewed-by: Amit Kapila and Amit Langote
Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
This patch adds the pseudo-types anycompatible, anycompatiblearray,
anycompatiblenonarray, and anycompatiblerange. They work much like
anyelement, anyarray, anynonarray, and anyrange respectively, except
that the actual input values need not match precisely in type.
Instead, if we can find a common supertype (using the same rules
as for UNION/CASE type resolution), then the parser automatically
promotes the input values to that type. For example,
"myfunc(anycompatible, anycompatible)" can match a call with one
integer and one bigint argument, with the integer automatically
promoted to bigint. With anyelement in the definition, the user
would have had to cast the integer explicitly.
The new types also provide a second, independent set of type variables
for function matching; thus with "myfunc(anyelement, anyelement,
anycompatible) returns anycompatible" the first two arguments are
constrained to be the same type, but the third can be some other
type, and the result has the type of the third argument. The need
for more than one set of type variables was foreseen back when we
first invented the polymorphic types, but we never did anything
about it.
Pavel Stehule, revised a bit by me
Discussion: https://postgr.es/m/CAFj8pRDna7VqNi8gR+Tt2Ktmz0cq5G93guc3Sbn_NVPLdXAkqA@mail.gmail.com
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
An AllocSet doubles the size of allocated blocks (up to maxBlockSize),
which means that the current block can represent half of the total
allocated space for the memory context. But the free space in the
current block may never have been touched, so don't count the
untouched memory as allocated for the purposes of
MemoryContextMemAllocated().
Discussion: https://postgr.es/m/ec63d70b668818255486a83ffadc3aec492c1f57.camel@j-davis.com
We don't need to manually clean up allocations in a SRF's
multi_call_memory_ctx, because the SRF_RETURN_DONE infrastructure
takes care of that (and also ensures that it will happen even if the
function never gets a final call, which simple manual cleanup cannot
do).
Hence, the code removed by this patch is a waste of code and cycles.
Worse, it gives the impression that cleaning up manually is a thing,
which can lead to more serious errors such as those fixed in
commits 085b6b667 and b4570d33a. So we should get rid of it.
These are not quite actual bugs though, so I couldn't muster the
enthusiasm to back-patch. Fix in HEAD only.
Justin Pryzby
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The effective_io_concurrency GUC and equivalent tablespace option were
previously passed through a formula based on a theory about RAID
spindles and probabilities, to arrive at the number of pages to prefetch
in bitmap heap scans. Tomas Vondra, Andres Freund and others argued
that it was anachronistic and hard to justify, and commit 558a9165e0
already started down the path of bypassing it in new code. We agreed to
drop that logic and use the value directly.
For the default setting of 1, there is no change in effect. Higher
settings can be converted from the old meaning to the new with:
select round(sum(OLD / n::float)) from generate_series(1, OLD) s(n);
We might want to consider renaming the GUC before the next release given
the change in meaning, but it's not clear that many users had set it
very carefully anyway. That decision is deferred for now.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The backend type, which corresponds to what
pg_stat_activity.backend_type shows, is added as a column to the
csvlog and can optionally be added to log_line_prefix using the new %b
placeholder.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Commit a5954de10 replaced a lot of manually-coded stub I/O routines
with code generated by macros. That was a good idea but it didn't
go far enough, because there were still manually-coded stub input
routines for types that had live output routines. Refactor the
macro so that we can generate just a stub input routine at need.
Also create similar macros to generate stub binary I/O routines,
since we have some of those now. The only stub functions that remain
hand-coded are shell_in() and shell_out(), which need to be separate
because they use different error messages.
While here, rearrange the commentary to discuss each type not each
function. This provides a better way to explain the *why* of which
types need which support, rather than just duplicatively annotating
the functions.
Discussion: https://postgr.es/m/24137.1584139352@sss.pgh.pa.us
resolve_polymorphic_tupdesc() and resolve_polymorphic_argtypes() failed to
cover the case of having to resolve anyarray given only an anyrange input.
The bug was masked if anyelement was also used (as either input or
output), which probably helps account for our not having noticed.
While looking at this I noticed that resolve_generic_type() would produce
the wrong answer if asked to make that same resolution. ISTM that
resolve_generic_type() is confusingly defined and overly complex, so
rather than fix it, let's just make funcapi.c do the specific lookups
it requires for itself.
With this change, resolve_generic_type() is not used anywhere, so remove
it in HEAD. In the back branches, leave it alone (complete with bug)
just in case any external code is using it.
While we're here, make some other refactoring adjustments in funcapi.c
with an eye to upcoming future expansion of the set of polymorphic types:
* Simplify quick-exit tests by adding an overall have_polymorphic_result
flag. This is about a wash now but will be a win when there are more
flags.
* Reduce duplication of code between resolve_polymorphic_tupdesc() and
resolve_polymorphic_argtypes().
* Don't bother to validate correct matching of anynonarray or anyenum;
the parser should have done that, and even if it didn't, just doing
"return false" here would lead to a very confusing, off-point error
message. (Really, "return false" in these two functions should only
occur if the call_expr isn't supplied or we can't obtain data type
info from it.)
* For the same reason, throw an elog rather than "return false" if
we fail to resolve a polymorphic type.
The bug's been there since we added anyrange, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/6093.1584202130@sss.pgh.pa.us
Use the new MyBackendType instead. More similar changes for other "am
something" variables are possible. This one was just particularly
simple.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Add a new global variable MyBackendType that uses the same BackendType
enum that was previously only used by the stats collector. That way
several duplicate ways of checking what type a particular process is
can be simplified. Since it's no longer just for stats, move to
miscinit.c and rename existing functions to match the expanded
purpose.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
If an index was explicitly set as replica identity index, this setting
was lost when a table was rewritten by ALTER TABLE. Because this
setting is part of pg_index but actually controlled by ALTER
TABLE (not part of CREATE INDEX, say), we have to do some extra work
to restore it.
Based-on-patch-by: Quan Zongliang <quanzongliang@gmail.com>
Reviewed-by: Euler Taveira <euler.taveira@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c70fcab2-4866-0d9f-1d01-e75e189db342@gmail.com
This coding technique is undesirable because (a) it leaks the FD for
the rest of the transaction if the SRF is not run to completion, and
(b) allocated FDs are a scarce resource, but multiple interleaved
uses of the relevant functions could eat many such FDs.
In v11 and later, a query such as "SELECT pg_ls_waldir() LIMIT 1"
yields a warning about the leaked FD, and the only reason there's
no warning in earlier branches is that fd.c didn't whine about such
leaks before commit 9cb7db3f0. Even disregarding the warning, it
wouldn't be too hard to run a backend out of FDs with careless use
of these SQL functions.
Hence, rewrite the function so that it reads the directory within
a single call, returning the results as a tuplestore rather than
via value-per-call mode.
There are half a dozen other built-in SRFs with similar problems,
but let's fix this one to start with, just to see if the buildfarm
finds anything wrong with the code.
In passing, fix bogus error report for stat() failure: it was
whining about the directory when it should be fingering the
individual file. Doubtless a copy-and-paste error.
Back-patch to v10 where this function was added.
Justin Pryzby, with cosmetic tweaks and test cases by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The code around InitPostmasterChild() from commit 31c453165b somehow
ended up in the middle of a block of code related to "User ID state".
Move it into its own block instead.
Fix up some imprecise comments and poor markup from ba79cb5dc. Also try
to convert the documentation of log_min_duration_sample and friends into
passable English.
This catalog-handling code was previously together with the rest of
CastCreate() in src/backend/commands/functioncmds.c. A future patch
will need a way to add casts internally, so this will be useful to have
separate.
Also, move the nearby get_cast_oid() function from functioncmds.c to
lsyscache.c, which seems a more natural place for it.
Author: Paul Jungwirth, minor edits by Álvaro
Discussion: https://postgr.es/m/20200309210003.GA19992@alvherre.pgsql
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
Such indexes can only be duplicated leftovers of a previously failed
REINDEX CONCURRENTLY command, and a valid equivalent is guaranteed to
exist. As toast indexes can only be dropped if invalid, reindexing
these would lead to useless duplicated indexes that can't be dropped
anymore, except if the parent relation is dropped.
Thanks to Justin Pryzby for reminding that this problem was reported
long ago during the review of the original patch of REINDEX
CONCURRENTLY, but the issue was never addressed.
Reported-by: Sergei Kornilov, Justin Pryzby
Author: Julien Rouhaud
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/36712441546604286%40sas1-890ba5c2334a.qloud-c.yandex.net
Discussion: https://postgr.es/m/20200216190835.GA21832@telsasoft.com
Backpatch-through: 12
Increases the number of tapes in a logical tape set. This will be
important for disk-based hash aggregation, because the maximum number
of tapes is not known ahead of time.
While discussing this change, it was observed to regress the
performance of Sort for at least one test case. The performance
regression was because some versions of GCC switch to an inlined
version of memcpy() in LogicalTapeWrite() after this change. No
performance regression for clang was observed.
Because the regression is due to an arbitrary decision by the
compiler, I decided it shouldn't hold up this change. If it needs to
be fixed, we can find a workaround.
Author: Adam Lee, Jeff Davis
Discussion: https://postgr.es/m/e54bfec11c59689890f277722aaaabd05f78e22c.camel%40j-davis.com
This commit changes the GUC ssl_passphrase_command so that
it's examinable by only superuser and a member of pg_read_all_settings.
Per discussion, we determined to do this because the parameter may
contain a sensitive informtaion like a passphrase itself.
Author: Insung Moon
Reviewed-by: Keisuke Kuroda
Discussion: https://postgr.es/m/CAEMmqBuHVGayc+QkYKgx3gWSdqwTAQGw+0DYn3WhcX-eNa2ntA@mail.gmail.com
SQL includes provisions for numeric Unicode escapes in string
literals and identifiers. Previously we only accepted those
if they represented ASCII characters or the server encoding
was UTF-8, making the conversion to internal form trivial.
This patch adjusts things so that we'll call the appropriate
encoding conversion function in less-trivial cases, allowing
the escape sequence to be accepted so long as it corresponds
to some character available in the server encoding.
This also applies to processing of Unicode escapes in JSONB.
However, the old restriction still applies to client-side
JSON processing, since that hasn't got access to the server's
encoding conversion infrastructure.
This patch includes some lexer infrastructure that simplifies
throwing errors with error cursors pointing into the middle of
a string (or other complex token). For the moment I only used
it for errors relating to Unicode escapes, but we might later
expand the usage to some other cases.
Patch by me, reviewed by John Naylor.
Discussion: https://postgr.es/m/2393.1578958316@sss.pgh.pa.us
Specifically, this patch allows ALTER TYPE to:
* Change the default TOAST strategy for a toastable base type;
* Promote a non-toastable type to toastable;
* Add/remove binary I/O functions for a type;
* Add/remove typmod I/O functions for a type;
* Add/remove a custom ANALYZE statistics functions for a type.
The first of these can be done by the type's owner; all the others
require superuser privilege since misuse could cause problems.
The main motivation for this patch is to allow extensions to
upgrade the feature sets of their data types, so the set of
alterable properties is biased towards that use-case. However
it's also true that changing some other properties would be
a lot harder, as they get baked into physical storage and/or
stored expressions that depend on the type.
Along the way, refactor GenerateTypeDependencies() to make it easier
to call, refactor DefineType's volatility checks so they can be shared
by AlterType, and teach typcache.c that it might have to reload data
from the type's pg_type row, a scenario it never handled before.
Also rearrange alter_type.sgml a bit for clarity (put the
composite-type operations together).
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/20200228004440.b23ein4qvmxnlpht@development
A long time ago, it was necessary to declare datatype I/O functions,
triggers, and language handler support functions in a very type-unsafe
way involving a single pseudo-type "opaque". We got rid of those
conventions in 7.3, but there was still support in various places to
automatically convert such functions to the modern declaration style,
to be able to transparently re-load dumps from pre-7.3 servers.
It seems unnecessary to continue to support that anymore, so take out
the hacks; whereupon the "opaque" pseudo-type itself is no longer
needed and can be dropped.
This is part of a group of patches removing various server-side kluges
for transparently upgrading pre-8.0 dump files. Since we've had few
complaints about dropping pg_dump's support for dumping from pre-8.0
servers (commit 64f3524e2), it seems okay to now remove these kluges.
Discussion: https://postgr.es/m/4110.1583255415@sss.pgh.pa.us
We used to carry the I/O function OID in RangeIOData, but it's not used
for anything. Since the struct is not exposed to the world anyway, we
can simplify it a bit. Also, rename the FmgrInfo member to match
the accompanying 'typioparam' and put them in a more sensible order.
Reviewed by Tom Lane and Paul Jungwirth.
Discussion: https://postgr.es/m/20200304215711.GA8732@alvherre.pgsql
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
to_char() has long allowed the TM (translation mode) prefix to
specify output of translated month or day names; but that prefix
had no effect in input format strings. Now it does. to_date()
and to_timestamp() will now recognize the same month or day names
that to_char() would output for the same format code. Matching is
case-insensitive (per the active collation's notion of what that
means), just as it has always been for English month/day names
without the TM prefix.
(As per the discussion thread, there are lots of cases that this
feature will not handle, such as alternate day names. But being
able to accept what to_char() will output seems useful enough.)
In passing, fix some shaky English and violations of message
style guidelines in jsonpath errors for the .datetime() method,
which depends on this code.
Juan José Santamaría Flecha, reviewed and modified by me,
with other commentary from Alvaro Herrera, Tomas Vondra,
Arthur Zakirov, Peter Eisentraut, Mark Dilger.
Discussion: https://postgr.es/m/CAC+AXB3u1jTngJcoC1nAHBf=M3v-jrEfo86UFtCqCjzbWS9QhA@mail.gmail.com
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
When deciding on the local rscale to use for the Taylor series
expansion, ln_var() neglected to account for the fact that the result
is subsequently multiplied by a factor of 2^(nsqrt+1), where nsqrt is
the number of square root operations performed in the range reduction
step, which can be as high as 22 for very large inputs. This could
result in a loss of precision, particularly when combined with large
rscale values, for which a large number of Taylor series terms is
required (up to around 400).
Fix by computing a few extra digits in the Taylor series, based on the
weight of the multiplicative factor log10(2^(nsqrt+1)). It remains to
be proven whether or not the other 8 extra digits used for the Taylor
series is appropriate, but this at least deals with the obvious
oversight of failing to account for the effects of the final
multiplication.
Per report from Justin AnyhowStep. Reviewed by Tom Lane.
Discussion: https://postgr.es/m/16280-279f299d9c06e56f@postgresql.org
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Invent the concept of a B-Tree equalimage ("equality implies image
equality") support function, registered as support function 4. This
indicates whether it is safe (or not safe) to apply optimizations that
assume that any two datums considered equal by an operator class's order
method must be interchangeable without any loss of semantic information.
This is static information about an operator class and a collation.
Register an equalimage routine for almost all of the existing B-Tree
opclasses. We only need two trivial routines for all of the opclasses
that are included with the core distribution. There is one routine for
opclasses that index non-collatable types (which returns 'true'
unconditionally), plus another routine for collatable types (which
returns 'true' when the collation is a deterministic collation).
This patch is infrastructure for an upcoming patch that adds B-Tree
deduplication.
Author: Peter Geoghegan, Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
hash_any() and its various variants are defined to return Datum,
which is a backend-only concept, but the underlying functions
actually want to return uint32 and uint64, and only return Datum
because it's convenient for callers who are using them to
implement a hash function for some SQL datatype.
However, changing these functions to return uint32 and uint64
seems like it might lead to programming errors or back-patching
difficulties, both because they are widely used and because
failure to use UInt{32,64}GetDatum() might not provoke a
compilation error. Instead, rename the existing functions as
well as changing the return type, and add static inline wrappers
for those callers that need the previous behavior.
Although this commit adapts hashutils.h and hashfn.c so that they
can be compiled as frontend code, it does not actually do
anything that would cause them to be so compiled. That is left
for another commit.
Patch by me, reviewed by Suraj Kharage and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
The closely-related function bms_hash_value is already defined in that
file, and this change means that hashfn.c no longer needs to depend on
nodes/bitmapset.h. That gets us closer to allowing use of the hash
functions in hashfn.c in frontend code.
Patch by me, reviewed by Suraj Kharage and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Windows has this, and so do all other live platforms according to the
buildfarm; it's been required by POSIX since SUSv2. So remove the
configure probe and tests of HAVE_WCHAR_H.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Prior to this commit, the read buffer was allocated at the time the tape
was rewound; but as an optimization, would not be allocated at all if
the tape was empty.
That optimization meant that it was valid to have a rewound tape with
the buffer set to NULL, but only if a number of conditions were met
and only if the API was used properly. After 7fdd919a refactored the
code to support lazily-allocating the buffer, Coverity started
complaining.
The optimization for empty tapes doesn't seem important, so just
allocate the buffer whether the tape has any data or not.
Discussion: https://postgr.es/m/20351.1581868306%40sss.pgh.pa.us
Commit 6bf0bc842 replaced float.c's CHECKFLOATVAL() macro with static
inline subroutines, but that wasn't too well thought out. In the original
coding, the unlikely condition (isinf(result) or result == 0) was checked
first, and the inf_is_valid or zero_is_valid condition only afterwards.
The inline-subroutine coding caused that to be swapped around, which is
pretty horrid for performance because (a) in common cases the is_valid
condition is twice as expensive to evaluate (e.g., requiring two isinf()
calls not one) and (b) in common cases the is_valid condition is false,
requiring us to perform the unlikely-condition check anyway. Net result
is that one isinf() call becomes two or three, resulting in visible
performance loss as reported by Keisuke Kuroda.
The original fix proposal was to revert the replacement of the macro,
but on second thought, that macro was just a bad idea from the beginning:
if anything it's a net negative for readability of the code. So instead,
let's just open-code all the overflow/underflow tests, being careful to
test the unlikely condition first (and mark it unlikely() to help the
compiler get the point).
Also, rather than having N copies of the actual ereport() calls, collapse
those into out-of-line error subroutines to save some code space. This
does mean that the error file/line numbers won't be very helpful for
figuring out where the issue really is --- but we'd already burned that
bridge by putting the ereports into static inlines.
In HEAD, check_float[48]_val() are gone altogether. In v12, leave them
present in float.h but unused in the core code, just in case some
extension is depending on them.
Emre Hasegeli, with some kibitzing from me and Andres Freund
Discussion: https://postgr.es/m/CANDwggLe1Gc1OrRqvPfGE=kM9K0FSfia0hbeFCEmwabhLz95AA@mail.gmail.com
Commit 147e3722f7 changed Tid scan so that it calls table_beginscan()
and uses the scan option for seq scan. This change caused two issues.
(1) The change caused Tid scan to take a predicate lock on the entire
relation in serializable transaction even when relation-level
lock is not necessary. This could lead to an unexpected
serialization error.
(2) The change caused Tid scan to increment the number of seq_scan
in pg_stat_*_tables views even though it's not seq scan. This
could confuse the users.
This commit adds the scan option for Tid scan and makes Tid scan
use it, to avoid those issues.
Back-patch to v12, where the bug was introduced.
Author: Tatsuhito Kasahara
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVKy+gTbFmB6X_UW0pP3WaeJ-fkUWHoD-pExS=at3CY76g@mail.gmail.com
This reverts commit 41aadee, as the GUC checks could run on older values
with the new values used, and result in incorrect errors if both
parameters are changed at the same time.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/27574.1581015893@sss.pgh.pa.us
Backpatch-through: 12
Heikki Linnakangas
Michael Paquier
Peter Geoghegan
Tom Lane
Magnus Hagander
Fujii Masao
Tomas Vondra
Peter Eisentraut
Dean Rasheed
Thomas Munro
Bruce Momjian
Alexander Korotkov
Noah Misch
Stephen Frost
Amit Kapila
David Rowley
Alvaro Herrera
Robert Haas
Jeff Davis
Andres Freund
Joe Conway
Andrew Dunstan