Experimentation with contrib/btree_gist shows that the majority of the GIST
support functions potentially need collation information. Safest policy
seems to be to pass it to all of them, instead of making assumptions about
which ones could possibly need it.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
If we find a DELETE_IN_PROGRESS HOT-updated tuple, it is impossible to know
whether to index it or not except by waiting to see if the deleting
transaction commits. If it doesn't, the tuple might again be LIVE, meaning
we have to index it. So wait and recheck in that case.
Also, we must not rely on ii_BrokenHotChain to decide that it's possible to
omit tuples from the index. That could result in omitting tuples that we
need, particularly in view of yesterday's fixes to not necessarily set
indcheckxmin (but it's broken even without that, as per my analysis today).
Since this is just an extremely marginal performance optimization, dropping
the test shouldn't hurt.
These cases are only expected to happen in system catalogs (they're
possible there due to early release of RowExclusiveLock in most
catalog-update code paths). Since reindexing of a system catalog isn't a
particularly performance-critical operation anyway, there's no real need to
be concerned about possible performance degradation from these changes.
The worst aspects of this bug were introduced in 9.0 --- 8.x will always
wait out a DELETE_IN_PROGRESS tuple. But I think dropping index entries
on the strength of ii_BrokenHotChain is dangerous even without that, so
back-patch removal of that optimization to 8.3 and 8.4.
Per comment from Greg Stark, it's less clear that HOT chains don't conflict
with the index than it would be for a valid index. So, let's preserve the
former behavior that indcheckxmin does get set when there are
potentially-broken HOT chains in this case. This change does not cause any
pg_index update that wouldn't have happened anyway, so we're not
re-introducing the previous bug with pg_index updates, and surely the case
is not significant from a performance standpoint; so let's be as
conservative as possible.
The original coding assumed that such a case represents caller error, but
actually get_relation_info will omit generating an IndexOptInfo for any
index it thinks is unsafe to use. Therefore, handle this case by returning
"true" to indicate that a seqscan-and-sort is the preferred way to
implement the CLUSTER operation. New bug in 9.1, no backpatch needed.
Per bug #5985 from Daniel Grace.
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
While "UTF8" is the correct name for this encoding, existing JDBC drivers
expect that if they send "UNICODE" it will read back the same way; they
fail with an opaque "Protocol error" complaint if not. This will be fixed
in the 9.1 drivers, but until older drivers are no longer in use in the
wild, we'd better leave "UNICODE" alone. Continue to canonicalize all
other inputs. Per report from Steve Singer and subsequent discussion.
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
This also ensures that we take a relation lock on the composite type when
creating a typed table, which is necessary to prevent the composite type
and the typed table from getting out of step in the face of concurrent
DDL.
Noah Misch, with some changes.
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
The other DDL operations that create an inheritance relationship were
checking for collation match already, but this one got missed.
Also fix comments that failed to mention collation checks.
Fix crash when releasing duplicate entries in the encoding conversion cache
list, caused by releasing the current entry of the list being chased by
foreach(). We have a standard idiom for handling such cases, but this
loop wasn't using it.
This got broken in my recent rewrite of GUC assign hooks. Not sure how
I missed this when testing the modified code, but I did. Per report from
Peter.
For what seem entirely historical reasons, a bitmask "flags" argument was
recently added to reindex_relation without subsuming its existing boolean
argument into that bitmask. This seems a bit bizarre, so fold them
together.
This area was a few bricks shy of a load, and badly under-commented too.
We have to ensure that the generated targetlist entries for a set-operation
node expose the correct collation for each entry, since higher-level
processing expects the tlist to reflect the true ordering of the plan's
output.
This hackery wouldn't be necessary if SortGroupClause carried collation
info ... but making it do so would inject more pain in the parser than
would be saved here. Still, we might want to rethink that sometime.
The places that attempt to change pg_index.indcheckxmin during a reindexing
operation cannot be executed safely if pg_index itself is the subject of
the operation. This is the explanation for a couple of recent reports of
VACUUM FULL failing with
ERROR: duplicate key value violates unique constraint "pg_index_indexrelid_index"
DETAIL: Key (indexrelid)=(2678) already exists.
However, there isn't any real need to update indcheckxmin in such a
situation, if we assume that pg_index can never contain a truly broken HOT
chain. This assumption holds if new indexes are never created on it during
concurrent operations, which is something we don't consider safe for any
system catalog, not just pg_index. Accordingly, modify the code to not
manipulate indcheckxmin when reindexing any system catalog.
Back-patch to 8.3, where HOT was introduced. The known failure scenarios
involve 9.0-style VACUUM FULL, so there might not be any real risk before
9.0, but let's not assume that.
Although rowcount estimates really ought not be NaN, a bug elsewhere
could perhaps result in that, and that would cause Assert failure in
cost_mergejoin, which I believe to be the explanation for bug #5977 from
Anton Kuznetsov. Seems like a good idea to expend a couple more cycles
to prevent that, even though the real bug is elsewhere. Not back-patching,
though, because we don't encourage running production systems with
Asserts on.
The hash table is seq scanned at transaction end, to release all locks,
and making the hash table larger than necessary makes that slower. With
very simple queries, that overhead can amount to a few percent of the total
CPU time used.
At the moment, backend startup needs 6 locks, and a simple query with one
table and index needs 3 locks. 16 is enough for even quite complicated
transactions, and it will grow automatically if it fills up.
The lock level for adding a parent table is now ShareUpdateExclusiveLock;
see commit fbcf4b92aa. This comment didn't
get updated to match, but it doesn't seem important to mention this detail
here, so rather than updating it now, just take it out.
Instead of using slightly-too-clever heuristics to decide when we must
create a TOAST table, just check whether one is needed every time the
table is altered. Checking whether a toast table is needed is cheap
enough that we needn't worry about doing it on every ALTER TABLE command,
and the previous coding is apparently prone to accidental breakage:
commit 04e17bae50 broken ALTER TABLE ..
SET STORAGE, which moved some actions from AT_PASS_COL_ATTRS to
AT_PASS_MISC, and commit 6c57239985 broke
ALTER TABLE .. ADD COLUMN by changing the way that adding columns
recurses into child tables.
Noah Misch, with one comment change by me
When we are doing GEQO join planning, the current memory context is a
short-lived context that will be reset at the end of geqo_eval(). However,
the RelOptInfos for base relations are set up before that and then re-used
across many GEQO cycles. Hence, any code that modifies a baserel during
join planning has to be careful not to put pointers to the short-lived
context into the baserel struct. mark_dummy_rel got this wrong, leading to
easy-to-reproduce-once-you-know-how crashes in 8.4, as reported off-list by
Leo Carson of SDSC. Some improvements made in 9.0 make it difficult to
demonstrate the crash in 9.0 or HEAD; but there's no doubt that there's
still a risk factor here, so patch all branches that have the function.
(Note: 8.3 has a similar function, but it's only applied to joinrels and
thus is not a hazard.)
than on other platforms, and only IPv6 addresses are returned. Because of
those two issues, fall back to ioctl(SIOCGIFCONF) on HP/UX, so that it at
least compiles and finds IPv4 addresses. This function is currently only
used for interpreting samehost/samenet in pg_hba.conf, which isn't that
critical.
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
In particular, if we don't have real ndistinct estimates for both sides,
fall back to assuming that half of the left-hand rows have join partners.
This is what was done in 8.2 and 8.3 (cf nulltestsel() in those versions).
It's pretty stupid but it won't lead us to think that an antijoin produces
no rows out, as seen in recent example from Uwe Schroeder.
If the referencing and referenced columns have different collations,
the parser will be unable to resolve which collation to use unless it's
helped out in this way. The effects are sometimes masked, if we end up
using a non-collation-sensitive plan; but if we do use a mergejoin
we'll see a failure, as recently noted by Robert Haas.
The SQL spec states that the referenced column's collation should be used
to resolve RI checks, so that's what we do. Note however that we currently
don't append a COLLATE clause when writing a query that examines only the
referencing column. If we ever support collations that have varying
notions of equality, that will have to be changed. For the moment, though,
it's preferable to leave it off so that we can use a normal index on the
referencing column.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This is necessary, not optional, now that ILIKE and regexes are collation
aware --- else we might derive a wrong comparison constant for index
optimized pattern matches.
entry's commitSeqNo to that of the old one being transferred, or take
the minimum commitSeqNo if it is merging two lock entries.
Also, CreatePredicateLock should initialize commitSeqNo for to
InvalidSerCommitSeqNo instead of to 0. (I don't think using 0 would
actually affect anything, but we should be consistent.)
I also added a couple of assertions I used to track this down: a
lock's commitSeqNo should never be zero, and it should be
InvalidSerCommitSeqNo if and only if the lock is not held by
OldCommittedSxact.
Dan Ports, to fix leak of predicate locks reported by YAMAMOTO Takashi.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
The original collation patch only fixed the multi-byte code path.
This change also ensures that ILIKE's idea of the case-folding rules
is exactly the same as str_tolower's.
Remove crude hack that tried to propagate collation through a
function-returning-record, ie, from the function's arguments to individual
fields selected from its result record. That is just plain inconsistent,
because the function result is composite and cannot have a collation;
and there's no hope of making this kind of action-at-a-distance work
consistently. Adjust regression test cases that expected this to happen.
Meanwhile, the behavior of casting to a domain with a declared collation
stays the same as it was, since that seemed to be the consensus.
Get rid of bogus collation test in match_special_index_operator (even for
ILIKE, the pattern match operator's collation doesn't matter here, and even
if it did the test was testing the wrong thing).
Fix broken looping logic in expand_indexqual_rowcompare.
Add collation check in match_clause_to_ordering_op.
Make naming and argument ordering more consistent; improve comments.
The previous coding worked only if ltproc->fn_collation was always either
DEFAULT_COLLATION_OID or a C-compatible locale. While that's true at the
moment, it wasn't documented (and in fact wasn't true when this code was
committed...). But it only takes a couple more lines to make its internal
caching behavior locale-aware, so let's do that.
Otherwise, the SLRU machinery can get confused and think that the SLRU
has wrapped around. Along the way, regardless of whether we're
truncating all of the SLRU or just some of it, flush pages after
truncating, rather than before.
Kevin Grittner
Honor index column's collation spec if there is one, don't go to the
expense of calling get_typcollation when we can reasonably assume that
all GIN storage types will use default collation, and be sure to set
a collation for the comparePartialFn too.
All the other fields of the constant are being extracted from the syscache
entry we already have, so handle collation similarly. (There don't seem
to be any other uses for the new function at the moment.)
When a regular lock is held, SSI can use that in lieu of a predicate lock
to detect rw conflicts; but if the regular lock is being taken by a
subtransaction, we can't assume that it'll commit, so releasing the
parent transaction's lock in that case is a no-no.
Kevin Grittner
If we call hash_search() with HASH_ENTER, it will bail out rather than
return NULL, so it's redundant to check for NULL again in the caller.
Thus, in cases where we believe it's impossible for the hash table to run
out of slots anyway, we can simplify the code slightly.
On the flip side, in cases where it's theoretically possible to run out of
space, we don't want to rely on dynahash.c to throw an error; instead,
we pass HASH_ENTER_NULL and throw the error ourselves if a NULL comes
back, so that we can provide a more descriptive error message.
Kevin Grittner
Remove the hard-wired assumption that __mips__ (and only __mips__) lacks
dlopen in FreeBSD and OpenBSD. This assumption is outdated at least for
OpenBSD, as per report from an anonymous 9.1 tester. We can perfectly well
use HAVE_DLOPEN instead to decide which code to use.
Some other cosmetic adjustments to make freebsd.c, netbsd.c, and openbsd.c
exactly alike.
Previous patches took care of assorted places that call transformExpr from
outside the main parser, but I overlooked the fact that some places use
transformWhereClause as a shortcut for transformExpr + coerce_to_boolean.
In particular this broke collation-sensitive index WHERE clauses, as per
report from Thom Brown. Trigger WHEN and rule WHERE clauses too.
I'm not forcing initdb for this fix, but any affected indexes, triggers,
or rules will need to be dropped and recreated.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
When we release and reacquire SerializableXactHashLock, we must recheck
whether an R/W conflict still needs to be flagged, because it could have
changed under us in the meantime. And when we release the partition
lock, we must re-walk the list of predicate locks from the beginning,
because our pointer could get invalidated under us.
Bug report #5952 by Yamamoto Takashi. Patch by Kevin Grittner.
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
The previous coding set attinhcount too high in some cases, resulting in
an undumpable, undroppable column. Per bug #5856, reported by Naoya
Anzai. See also commit 31b6fc06d8, which
fixes a similar bug in ALTER TABLE .. ADD CONSTRAINT.
Patch by Noah Misch.
If a smart shutdown occurs just as a child is starting up, and the
child subsequently becomes a walsender, there is a race condition:
the postmaster might count the exstant backends, determine that there
is one normal backend, and wait for it to die off. Had the walsender
transition already occurred before the postmaster counted, it would
have proceeded with the shutdown.
To fix this, have each child that transforms into a walsender kick
the postmaster just after doing so, so that the state machine is
certain to advance.
Fujii Masao
This mostly involves making it work with the objectaddress.c framework,
which does most of the heavy lifting. In that vein, change
GetForeignDataWrapperOidByName to get_foreign_data_wrapper_oid and
GetForeignServerOidByName to get_foreign_server_oid, to match the
pattern we use for other object types.
Robert Haas and Shigeru Hanada
examining the head of predicate locks list. Also, fix the comment of
RemoveTargetIfNoLongerUsed, it was neglected when we changed the way update
chains are handled.
Kevin Grittner
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
Feature F692 "Extended collation support" is now also supported. This
refers to allowing the COLLATE clause anywhere in a column or domain
definition instead of just directly after the type.
Also correct the name of the feature in accordance with the latest SQL
standard.
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
I'm not sure these have any non-cosmetic implications, but I'm not sure
they don't, either. In particular, ensure the CaseTestExpr generated
by transformAssignmentIndirection to represent the base target column
carries the correct collation, because parse_collate.c won't fix that.
Tweak lsyscache.c API so that we can get the appropriate collation
without an extra syscache lookup.
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
It originally worked this way, but was changed by commit
a8a8a3e096, since which time it's been impossible
for walreceiver to ever send a reply with write_location and flush_location
set to different values.
Ensure that parameter symbols receive collation from the function's
resolved input collation, and fix inlining to behave properly.
BTW, this commit lays about 90% of the infrastructure needed to support
use of argument names in SQL functions. Parsing of parameters is now
done via the parser-hook infrastructure ... we'd just need to supply
a column-ref hook ...
Ensure that COLLATE at the top level of an index expression is treated the
same as a grammatically separate COLLATE. Fix bogus reverse-parsing logic
in pg_get_indexdef.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
This is no longer necessary, and might result in a situation where the
configuration file is reloaded (and everything seems OK) but a subsequent
restart of the database fails.
Per an observation from Fujii Masao.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
pg_newlocale_from_collation does not have enough context to give an error
message that's even a little bit useful, so move the responsibility for
complaining up to its callers. Also, reword ERRCODE_INDETERMINATE_COLLATION
error messages in a less jargony, more message-style-guide-compliant
fashion.
This restores a parse error that was thrown (though only in the ORDER BY
case) by the original collation patch. I had removed it in my recent
revisions because it was thrown at a place where collations now haven't
been computed yet; but I thought of another way to handle it.
Throwing the error at parse time, rather than leaving it to be done at
runtime, is good because a syntax error pointer is helpful for localizing
the problem. We can reasonably assume that the comparison function for a
collatable datatype will complain if it doesn't have a collation to use.
Now the planner might choose to implement GROUP or DISTINCT via hashing,
in which case no runtime error would actually occur, but it seems better
to throw error consistently rather than let the error depend on what the
planner chooses to do. Another possible objection is that the user might
specify a nondefault sort operator that doesn't care about collation
... but that's surely an uncommon usage, and it wouldn't hurt him to throw
in a COLLATE clause anyway. This change also makes the ORDER BY/GROUP
BY/DISTINCT case more consistent with the UNION/INTERSECT/EXCEPT case,
which was already coded to throw this error even though the same objections
could be raised there.
Opening a catcache's index could require reading from that cache's own
catalog, which of course would acquire AccessShareLock on the catalog.
So the original coding here risks locking index before heap, which could
deadlock against another backend trying to get exclusive locks in the
normal order. Because InitCatCachePhase2 is only called when a backend
has to start up without a relcache init file, the deadlock was seldom seen
in the field. (And by the same token, there's no need to worry about any
performance disadvantage; so not much point in trying to distinguish
exactly which catalogs have the risk.)
Bug report, diagnosis, and patch by Nikhil Sontakke. Additional commentary
by me. Back-patch to all supported branches.
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access. This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice. The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner. Per complaint from Marti Raudsepp.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
The local variable "sock" can be unused depending on compilation flags.
But there seems no particular need for it, since the kernel calls can
just as easily say port->sock instead.
Install just one instance of the "C" and "POSIX" collations into
pg_collation, rather than one per encoding. Make these instances exist
and do something useful even in machines without locale_t support: to wit,
it's now possible to force comparisons and case-folding functions to use C
locale in an otherwise non-C database, whether or not the platform has
support for using any additional collations.
Fix up severely broken upper/lower/initcap functions, too: the C/POSIX
fastpath now does what it is supposed to, and non-default collations are
handled correctly in single-byte database encodings.
Merge the two separate collation hashtables that were being maintained in
pg_locale.c, and be more wary of the possibility that we fail partway
through filling a cache entry.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
When adding an inheritance parent to a table, an AccessShareLock on the
parent isn't strong enough to prevent trouble, so take
ShareUpdateExclusiveLock instead. Since this is a behavior change,
albeit a fairly unobtrusive one, and since we have only one report
from the field, no back-patch.
Report by Jon Nelson, analysis by Alvaro Herrera, fix by me.
This is advantageous because the BG writer is alive until much later in
the shutdown sequence than WAL writer; we want to make sure that it's
possible to shut off synchronous replication during a smart shutdown,
else it might not be possible to complete the shutdown at all.
Per very reasonable gripes from Fujii Masao and Simon Riggs.
The maximum value of deadlock_timeout, max_standby_archive_delay,
max_standby_streaming_delay, log_min_duration_statement, and
log_autovacuum_min_duration was INT_MAX/1000 milliseconds, which is
about 35min, which is too short for some practical uses. Raise the
maximum value to INT_MAX; the code that uses the parameters already
supports that just fine.
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
This patch causes unknown-type Consts to be coerced to the resolved output
type of the set operation at parse time. Formerly such Consts were left
alone until late in the planning stage. The disadvantage of that approach
is that it disables some optimizations, because the planner sees the set-op
leaf query as having different output column types than the overall set-op.
We saw an example of that in a recent performance gripe from Claudio
Freire.
Fixing such a Const requires scribbling on the leaf query in
transformSetOperationTree, but that should be all right since if the leaf
query's semantics depended on that output column, it would already have
resolved the unknown to something else.
Most of the bulk of this patch is a simple adjustment of
transformSetOperationTree's API so that upper levels can get at the
TargetEntry containing a Const to be replaced: it now returns a list of
TargetEntries, instead of just the bare expressions.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
Including collation in the behavior of that function promotes a world view
we do not want. Moreover, it was producing the wrong behavior for pg_dump
anyway: what we want is to dump a COLLATE clause on attributes whose
attcollation is different from the underlying type, and likewise for
domains, and the function cannot do that for us. Doing it the hard way
in pg_dump is a bit more tedious but produces more correct output.
In passing, fix initdb so that the initial entry in pg_collation is
properly pinned. It was droppable before :-(
It's not a good idea to kill the postmaster just because someone muffs
this, and it's not consistent with what we do for other, similar GUCs.
Fujii Masao, with a bit more hacking by me
SyncRepRequested() must check not only the value of the
synchronous_replication GUC but also whether max_wal_senders > 0.
Otherwise, we might end up waiting for sync rep even when there's no
possibility of a standby ever managing to connect. There are some
existing cross-checks to prevent this, but they're not quite sufficient:
the user can start the server with max_wal_senders=0,
synchronous_standby_names='', and synchronous_replication=off and then
subsequent make synchronous_standby_names not empty using pg_ctl reload,
and then SET synchronous_standby=on, leading to an indefinite hang.
Along the way, rename the global variable for the synchronous_replication
GUC to match the name of the GUC itself, for clarity.
Report by Fujii Masao, though I didn't use his patch.
At least two recent commits have apparently imagined that a comment in
a Makefile stating that something would be included in the distribution
tarball was sufficient to make it so. They hadn't bothered to hook
into the upper maintainer-clean targets either. Per bug #5923 from
Charles Johnson, in which it emerged that the 9.1alpha4 tarballs are
short a few files that should be there.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Formerly, any member of a role could change the role's comment, as of
course could superusers; but holders of CREATEROLE privilege could not,
unless they were also members. This led to the odd situation that a
CREATEROLE holder could create a role but then could not comment on it.
It also seems a bit dubious to let an unprivileged user change his own
comment, let alone those of group roles he belongs to. So, change the
rule to be "you must be superuser to comment on a superuser role, or
hold CREATEROLE to comment on non-superuser roles". This is the same
as the privilege check for creating/dropping roles, and thus fits much
better with the rule for other object types, namely that only the owner
of an object can comment on it.
In passing, clean up the documentation for COMMENT a little bit.
Per complaint from Owen Jacobson and subsequent discussion.
We really need an automated check for this ... and did VALIDATE really
need to become a keyword at all, rather than picking some other syntax
using existing keywords?
race condition where SummarizeOldestCommittedSxact() is called even though
another backend already cleared out all finished sxact entries. That's OK,
RegisterSerializableTransactionInt() can just retry getting a news xact
slot from the available-list when that happens.
Reported by YAMAMOTO Takashi, bug #5918.
contains newly-inserted tuples that according to our OldestXmin are not
yet visible to everyone. The value returned by GetOldestXmin() is conservative,
and it can move backwards on repeated calls, so if we see that contradiction
between the PD_ALL_VISIBLE flag and status of tuples on the page, we have to
assume it's because an earlier vacuum calculated a higher OldestXmin value,
and all the tuples really are visible to everyone.
We have received several reports of this bug, with the "PD_ALL_VISIBLE flag
was incorrectly set in relation ..." warning appearing in logs. We were
finally able to hunt it down with David Gould's help to run extra diagnostics
in an environment where this happened frequently.
Also reword the warning, per Robert Haas' suggestion, to not imply that the
PD_ALL_VISIBLE flag is necessarily at fault, as it might also be a symptom
of corruption on a tuple header.
Backpatch to 8.4, where the PD_ALL_VISIBLE flag was introduced.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Since this field is after a variable-length field, it can't simply be
accessed via the C struct for pg_index. Fortunately, the relcache already
did the dirty work of pulling the information out to where it can be
accessed easily, so this is a one-line fix.
Andres Freund
This mostly just involves creating control, install, and
update-from-unpackaged scripts for them. However, I had to adjust plperl
and plpython to not share the same support functions between variants,
because we can't put the same function into multiple extensions.
catversion bump forced due to new contents of pg_pltemplate, and because
initdb now installs plpgsql as an extension not a bare language.
Add support for regression testing these as extensions not bare
languages.
Fix a couple of other issues that popped up while testing this: my initial
hack at pg_dump binary-upgrade support didn't work right, and we don't want
an extra schema permissions test after all.
Documentation changes still to come, but I'm committing now to see
whether the MSVC build scripts need work (likely they do).
It is possible that an expression ends up with a collatable type but
without a collation. CREATE TABLE AS could then create a table based
on that. But such a column cannot be dumped with valid SQL syntax, so
we disallow creating such a column.
per test report from Noah Misch
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
This works around the problem noted by Yamamoto Takashi in bug #5906,
that there were code paths whereby we could reach AtCleanup_Portals
with a portal's cleanup hook still unexecuted. The changes I made
a few days ago were intended to prevent that from happening, and
I think that on balance it's still a good thing to avoid, so I don't
want to remove the Assert in AtCleanup_Portals. Hence do this instead.
it a lot more useful for determining which standby is most up-to-date,
for example. There was long discussions on whether overwriting existing
existing WAL makes sense to begin with, and whether we should do some more
extensive variable renaming, but this change nevertheless seems quite
uncontroversial.
Fujii Masao, reviewed by Jeff Janes, Robert Haas, Stephen Frost.
Change the way UPDATEs are handled. Instead of maintaining a chain of
tuple-level locks in shared memory, copy any existing locks on the old
tuple to the new tuple at UPDATE. Any existing page-level lock needs to
be duplicated too, as a lock on the new tuple. That was neglected
previously.
Store xmin on tuple-level predicate locks, to distinguish a lock on an old
already-recycled tuple from a new tuple at the same physical location.
Failure to distinguish them caused loops in the tuple-lock chains, as
reported by YAMAMOTO Takashi. Although we don't use the chain representation
of UPDATEs anymore, it seems like a good idea to store the xmin to avoid
some false positives if no other reason.
CheckSingleTargetForConflictsIn now correctly handles the case where a lock
that's being held is not reflected in the local lock table. That happens
if another backend acquires a lock on our behalf due to an UPDATE or a page
split.
PredicateLockPageCombine now retains locks for the page that is being
removed, rather than removing them. This prevents a potentially dangerous
false-positive inconsistency where the local lock table believes that a lock
is held, but it is actually not.
Dan Ports and Kevin Grittner
Per discussion, this seems important for plans involving writable CTEs,
since there can now be more than one ModifyTable node in the plan.
To retain the same formatting as for target tables of scan nodes, we
show only one target table, which will be the parent table in case of
an UPDATE or DELETE on an inheritance tree. Individual child tables
can be determined by inspecting the child plan trees if needed.
Without this patch, when wal_receiver_status_interval=0, indicating that no
status messages should be sent, Hot Standby feedback messages are instead sent
extremely frequently.
Fujii Masao, with documentation changes by me.
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
We need ExecutorEnd to run the ModifyTable nodes to completion in
reverse order of initialization, not forward order. Easily done
by constructing the list back-to-front.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
Add functions plpy.quote_ident, plpy.quote_literal,
plpy.quote_nullable, which wrap the equivalent SQL functions.
To be able to propagate char * constness properly, make the argument
of quote_literal_cstr() const char *. This also makes it more
consistent with quote_identifier().
Jan Urbański, reviewed by Hitoshi Harada, some refinements by Peter
Eisentraut
"SELECT ... INTO UNLOGGED tabname" works, but wasn't documented; CREATE
UNLOGGED SEQUENCE and CREATE UNLOGGED VIEW failed an assertion, instead
of throwing a sensible error.
Latter issue reported by Itagaki Takahiro; patch review by Tom Lane.
void_send is useful for the same reason that void_out doesn't throw error,
namely that someone might do "select void_returning_func(...)" from a
client that prefers to operate in binary mode. The void_recv function may
or may not have any practical use, but we provide it for symmetry.
Radosław Smogura
This was a leftover from the pre-8.1 design of junkfilters. It doesn't
seem to have any reason to live, since it's merely a combination of two
easy function calls, and not a well-designed combination at that (it
encourages callers to leak the result tuple).
ExecUpdate checked for whether ExecBRUpdateTriggers had returned a new
tuple value by seeing if the returned tuple was pointer-equal to the old
one. But the "old one" was in estate->es_junkFilter's result slot, which
would be scribbled on if we had done an EvalPlanQual update in response to
a concurrent update of the target tuple; therefore we were comparing a
dangling pointer to a live one. Given the right set of circumstances we
could get a false match, resulting in not forcing the tuple to be stored in
the slot we thought it was stored in. In the case reported by Maxim Boguk
in bug #5798, this led to "cannot extract system attribute from virtual
tuple" failures when trying to do "RETURNING ctid". I believe there is a
very-low-probability chance of more serious errors, such as generating
incorrect index entries based on the original rather than the
trigger-modified version of the row.
In HEAD, change all of ExecBRInsertTriggers, ExecIRInsertTriggers,
ExecBRUpdateTriggers, and ExecIRUpdateTriggers so that they continue to
have similar APIs. In the back branches I just changed
ExecBRUpdateTriggers, since there is no bug in the ExecBRInsertTriggers
case.
File encodings can be specified separately from client encoding.
If not specified, client encoding is used for backward compatibility.
Cases when the encoding doesn't match client encoding are slower
than matched cases because we don't have conversion procs for other
encodings. Performance improvement would be be a future work.
Original patch by Hitoshi Harada, and modified by me.
This is both very useful in its own right, and an important test case
for the core FDW support.
This commit includes a small refactoring of copy.c to expose its option
checking code as a separately callable function. The original patch
submission duplicated hundreds of lines of that code, which seemed pretty
unmaintainable.
Shigeru Hanada, reviewed by Itagaki Takahiro and Tom Lane
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
They share the same locking namespace with the existing session-level
advisory locks, but they are automatically released at the end of the
current transaction and cannot be released explicitly via unlock
functions.
Marko Tiikkaja, reviewed by me.
ts_typanalyze.c computes MCE statistics as fractions of the non-null rows,
which seems fairly reasonable, and anyway changing it in released versions
wouldn't be a good idea. But then ts_selfuncs.c has to account for that.
Failure to do so results in overestimates in columns with a significant
fraction of null documents. Back-patch to 8.4 where this stuff was
introduced.
Jesper Krogh
That function was supposing that indexoid == 0 for a hypothetical index,
but that is not likely to be true in any non-toy implementation of an index
adviser, since assigning a fake OID is the only way to know at EXPLAIN time
which hypothetical index got selected. Fix by adding a flag to
IndexOptInfo to mark hypothetical indexes. Back-patch to 9.0 where
get_actual_variable_range() was added.
Gurjeet Singh
These are needed to support reloading dumps of 9.0 installations containing
contrib/intarray or contrib/tsearch2. Since not only regular dump/reload
but binary upgrade would fail, it seems worth the trouble to carry these
stubs for awhile. Note that the contrib opclasses referencing these
functions will still work fine, since GIN doesn't actually pay any
attention to the declared signature of a support function.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
(I'm not entirely sure that we've finished bikeshedding the syntax details,
but the functionality seems OK.)
Pavel Stehule, reviewed by Stephen Frost and Tom Lane
They are expected to be used by extension modules like file_fdw.
There are no user-visible changes.
Itagaki Takahiro
Reviewed and tested by Kevin Grittner and Noah Misch.
Recent releases had a check on rel->rd_refcnt in heap_drop_with_catalog,
but failed to cover the possibility of pending trigger events at DROP time.
(Before 8.4 we didn't even check the refcnt.) When the trigger events were
eventually fired, you'd get "could not open relation with OID nnn" errors,
as in recent report from strk. Better to throw a suitable error when the
DROP is attempted.
Also add a similar check in DROP INDEX.
Back-patch to all supported branches.
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me
The original design of pg_available_extensions did not consider the
possibility of version-specific control files. Split it into two views:
pg_available_extensions shows information that is generic about an
extension, while pg_available_extension_versions shows all available
versions together with information that could be version-dependent.
Also, add an SRF pg_extension_update_paths() to assist in checking that
a collection of update scripts provide sane update path sequences.
This allows us to have an unambiguous rule for deconstructing the names
of script files and secondary control files, without having to forbid
extension and version names from containing any dashes. We do have to
forbid them from containing double dashes or leading/trailing dashes,
but neither restriction is likely to bother anyone in practice.
Per discussion, this seems like a better solution overall than the
original design.
This change causes a multi-step update sequence to behave exactly as if the
updates had been commanded one at a time, including updating the "requires"
dependencies afresh at each step. The initial implementation took the
shortcut of examining only the final target version's "requires" and
changing the catalog entry but once. But on reflection that's a bad idea,
since it could lead to executing old update scripts under conditions
different than they were designed/tested for. Better to expend a few extra
cycles and avoid any surprises.
In the same spirit, if a CREATE EXTENSION FROM operation involves applying
a series of update files, it will act as though the CREATE had first been
done using the initial script's target version and then the additional
scripts were invoked with ALTER EXTENSION UPDATE.
I also removed the restriction about not changing encoding in secondary
control files. The new rule is that a script is assumed to be in whatever
encoding the control file(s) specify for its target version. Since this
reimplementation causes us to read each intermediate version's control
file, there's no longer any uncertainty about which encoding setting would
get applied.
relative, by creating a function path_is_relative_and_below_cwd() to
check for specific requirements. It is unclear if this fixes a security
problem or not but the new code is more robust.
- collowner field
- CREATE COLLATION
- ALTER COLLATION
- DROP COLLATION
- COMMENT ON COLLATION
- integration with extensions
- pg_dump support for the above
- dependency management
- psql tab completion
- psql \dO command
When the old type is binary coercible to the new type and the using
clause does not change the column contents, we can avoid a full table
rewrite, though any indexes on the affected columns will still need
to be rebuilt. This applies, for example, when changing a varchar
column to be of type text.
The prior coding assumed that the set of operations that force a
rewrite is identical to the set of operations that must be propagated
to tables making use of the affected table's rowtype. This is
no longer true: even though the tuples in those tables wouldn't
need to be modified, the data type change invalidate indexes built
using those composite type columns. Indexes on the table we're
actually modifying can be invalidated too, of course, but the
existing machinery is sufficient to handle that case.
Along the way, add some debugging messages that make it possible
to understand what operations ALTER TABLE is actually performing
in these cases.
Noah Misch and Robert Haas
Arrange for the control files to be in $SHAREDIR/extension not
$SHAREDIR/contrib, since we're generally trying to deprecate the term
"contrib" and this is a once-in-many-moons opportunity to get rid of it in
install paths. Fix PGXS to install the $EXTENSION file into that directory
no matter what MODULEDIR is set to; a nondefault MODULEDIR should only
affect the script and secondary extension files. Fix the control file
directory parameter to be interpreted relative to $SHAREDIR, to avoid a
surprising disconnect between how you specify that and what you set
MODULEDIR to.
Per discussion with David Wheeler.
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
Per discussion with Noah Misch, the previous coding, introduced by
my commit 65377e0b9c on 2011-02-06,
was really an abuse of RELKIND_COMPOSITE_TYPE, since the caller in
typecmds.c is actually passing the name of a domain. So go back
having a type name argument, but make the first argument a Relation
rather than just a string so we can tell whether it's a table or
a foreign table and emit the proper error message.
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Tracks one counter for each database, which is reset whenever
the statistics for any individual object inside the database is
reset, and one counter for the background writer.
Tomas Vondra, reviewed by Greg Smith
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns. Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure. This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE. Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.
Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code). Back-patch to 9.0.
This follows my proposal of yesterday, namely that we try to recreate the
previous state of the extension exactly, instead of allowing CREATE
EXTENSION to run a SQL script that might create some entirely-incompatible
on-disk state. In --binary-upgrade mode, pg_dump won't issue CREATE
EXTENSION at all, but instead uses a kluge function provided by
pg_upgrade_support to recreate the pg_extension row (and extension-level
pg_depend entries) without creating any member objects. The member objects
are then restored in the same way as if they weren't members, in particular
using pg_upgrade's normal hacks to preserve OIDs that need to be preserved.
Then, for each member object, ALTER EXTENSION ADD is issued to recreate the
pg_depend entry that marks it as an extension member.
In passing, fix breakage in pg_upgrade's enum-type support: somebody didn't
fix it when the noise word VALUE got added to ALTER TYPE ADD. Also,
rationalize parsetree representation of COMMENT ON DOMAIN and fix
get_object_address() to allow OBJECT_DOMAIN.
This is an essential component of making the extension feature usable;
first because it's needed in the process of converting an existing
installation containing "loose" objects of an old contrib module into
the extension-based world, and second because we'll have to use it
in pg_dump --binary-upgrade, as per recent discussion.
Loosely based on part of Dimitri Fontaine's ALTER EXTENSION UPGRADE
patch.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
Older versions of gcc tend to throw "variable might be clobbered by
`longjmp' or `vfork'" warnings whenever a variable is assigned in more than
one place and then used after the end of a PG_TRY block. That's reasonably
easy to work around in execute_extension_script, and the overhead of
unconditionally saving/restoring the GUC variables seems unlikely to be a
serious concern.
Also clean up logic in ATExecValidateConstraint to make it easier to read
and less likely to provoke "variable might be used uninitialized in this
function" warnings.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
If the standby was streaming when trigger file arrives, check also in the
archive for additional WAL files. This is a corner case since it is
unlikely that we would trigger a failover while the master is still
available and sending data to standby, while at the same time running in
archive mode and also while the streaming standby has fallen behind archive.
Someone would eventually be unlucky; we must plug all gaps however small.
Fujii Masao
FK constraints that are marked NOT VALID may later be VALIDATED, which uses an
ShareUpdateExclusiveLock on constraint table and RowShareLock on referenced
table. Significantly reduces lock strength and duration when adding FKs.
New state visible from psql.
Simon Riggs, with reviews from Marko Tiikkaja and Robert Haas
Waiting for relation locks can lead to starvation - it pins down an
autovacuum worker for as long as the lock is held. But if we're doing
an anti-wraparound vacuum, then we still wait; maintenance can no longer
be put off.
To assist with troubleshooting, if log_autovacuum_min_duration >= 0,
we log whenever an autovacuum or autoanalyze is skipped for this reason.
Per a gripe by Josh Berkus, and ensuing discussion.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
If the foreign table's rowtype is being used as the type of a column in
another table, we can't just up and change its data type. This was
already checked for composite types and ordinary tables, but we
previously failed to enforce it for foreign tables.
Make sure it's clear that the prohibition on adding a column with a default
when the rowtype is used elsewhere is intentional, and be a bit more
explicit about the other cases where we perform this check.
This fixes make distprep, and seems more robust in other ways as well.
Some special handling is required because errcodes.txt is needed by
some stuff in src/port, but just by src/backend as is the case for the
other generated headers.
While I'm at it, fix a few other things that were overlooked in the
original patch.
src/pl/plpgsql/src/plerrcodes.h, src/include/utils/errcodes.h, and a
big chunk of errcodes.sgml are now automatically generated from a single
file, src/backend/utils/errcodes.txt.
Jan Urbański, reviewed by Tom Lane.
Add the current xlog insert location to the response of
IDENTIFY_SYSTEM, and adds result sets containing start
and stop location of backups to BASE_BACKUP responses.