When a write transaction commits, it must clear its XID advertised via
the ProcArray, which requires that we hold ProcArrayLock in exclusive
mode in order to prevent concurrent processes running GetSnapshotData
from seeing inconsistent results. When many processes try to commit
at once, ProcArrayLock must change hands repeatedly, with each
concurrent process trying to commit waking up to acquire the lock in
turn. To make things more efficient, when more than one backend is
trying to commit a write transaction at the same time, have just one
of them acquire ProcArrayLock in exclusive mode and clear the XIDs of
all processes in the group. Benchmarking reveals that this is much
more efficient at very high client counts.
Amit Kapila, heavily revised by me, with some review also from Pavan
Deolasee.
Don't print a WARNING if we get ESRCH from a kill() that's attempting
to cancel an autovacuum worker. It's possible (and has been seen in the
buildfarm) that the worker is already gone by the time we are able to
execute the kill, in which case the failure is harmless. About the only
plausible reason for reporting such cases would be to help debug corrupted
lock table contents, but this is hardly likely to be the most important
symptom if that happens. Moreover issuing a WARNING might scare users
more than is warranted.
Also, since sending a signal to an autovacuum worker is now entirely a
routine thing, and the worker will log the query cancel on its end anyway,
reduce the message saying we're doing that from LOG to DEBUG1 level.
Very minor cosmetic cleanup as well.
Since the main practical reason for doing this is to avoid unnecessary
buildfarm failures, back-patch to all active branches.
This code was originally written as part of parallel query effort, but
it seems to have independent value, because if we make one decision
about where to get a PGPROC when we allocate and then put it back on a
different list at backend-exit time, bad things happen. This isn't
just a theoretical risk; we fixed an actual problem of this type in
commit e280c630a8.
Deadlock checking was performed inside signal handlers up to
now. While it's a remarkable feat to have made this work reliably,
it's quite complex to understand why that is the case. Partially it
worked due to the assumption that semaphores are signal safe - which
is not actually documented to be the case for sysv semaphores.
The reason we had to rely on performing this work inside signal
handlers is that semaphores aren't guaranteed to be interruptable by
signals on all platforms. But now that latches provide a somewhat
similar API, which actually has the guarantee of being interruptible,
we can avoid doing so.
Signalling between ProcSleep, ProcWakeup, ProcWaitForSignal and
ProcSendSignal is now done using latches. This increases the
likelihood of spurious wakeups. As spurious wakeup already were
possible and aren't likely to be frequent enough to be an actual
problem, this seems acceptable.
This change would allow for further simplification of the deadlock
checking, now that it doesn't have to run in a signal handler. But
even if I were motivated to do so right now, it would still be better
to do that separately. Such a cleanup shouldn't have to be reviewed a
the same time as the more fundamental changes in this commit.
There is one possible usability regression due to this commit. Namely
it is more likely than before that log_lock_waits messages are output
more than once.
Reviewed-By: Heikki Linnakangas
If any error occurred while we were in the middle of reading a protocol
message from the client, we could lose sync, and incorrectly try to
interpret a part of another message as a new protocol message. That will
usually lead to an "invalid frontend message" error that terminates the
connection. However, this is a security issue because an attacker might
be able to deliberately cause an error, inject a Query message in what's
supposed to be just user data, and have the server execute it.
We were quite careful to not have CHECK_FOR_INTERRUPTS() calls or other
operations that could ereport(ERROR) in the middle of processing a message,
but a query cancel interrupt or statement timeout could nevertheless cause
it to happen. Also, the V2 fastpath and COPY handling were not so careful.
It's very difficult to recover in the V2 COPY protocol, so we will just
terminate the connection on error. In practice, that's what happened
previously anyway, as we lost protocol sync.
To fix, add a new variable in pqcomm.c, PqCommReadingMsg, that is set
whenever we're in the middle of reading a message. When it's set, we cannot
safely ERROR out and continue running, because we might've read only part
of a message. PqCommReadingMsg acts somewhat similarly to critical sections
in that if an error occurs while it's set, the error handler will force the
connection to be terminated, as if the error was FATAL. It's not
implemented by promoting ERROR to FATAL in elog.c, like ERROR is promoted
to PANIC in critical sections, because we want to be able to use
PG_TRY/CATCH to recover and regain protocol sync. pq_getmessage() takes
advantage of that to prevent an OOM error from terminating the connection.
To prevent unnecessary connection terminations, add a holdoff mechanism
similar to HOLD/RESUME_INTERRUPTS() that can be used hold off query cancel
interrupts, but still allow die interrupts. The rules on which interrupts
are processed when are now a bit more complicated, so refactor
ProcessInterrupts() and the calls to it in signal handlers so that the
signal handlers always call it if ImmediateInterruptOK is set, and
ProcessInterrupts() can decide to not do anything if the other conditions
are not met.
Reported by Emil Lenngren. Patch reviewed by Noah Misch and Andres Freund.
Backpatch to all supported versions.
Security: CVE-2015-0244
To do so, move InitializeLatchSupport() into the new common process
initialization functions, and add a new global variable MyLatch.
MyLatch is usable as soon InitPostmasterChild() has been called
(i.e. very early during startup). Initially it points to a process
local latch that exists in all processes. InitProcess/InitAuxiliaryProcess
then replaces that local latch with PGPROC->procLatch. During shutdown
the reverse happens.
This is primarily advantageous for two reasons: For one it simplifies
dealing with the shared process latch, especially in signal handlers,
because instead of having to check for MyProc, MyLatch can be used
unconditionally. For another, a later patch that makes FEs/BE
communication use latches, now can rely on the existence of a latch,
even before having gone through InitProcess.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
Evidence from buildfarm member crake suggests that the new test_shm_mq
module is routinely crashing the server due to the arrival of a SIGUSR1
after the shared memory segment has been unmapped. Although processes
using the new dynamic background worker facilities are more likely to
receive a SIGUSR1 around this time, the problem is also possible on older
branches, so I'm back-patching the parts of this change that apply to
older branches as far as they apply.
It's already generally the case that code checks whether these pointers
are NULL before deferencing them, so the important thing is mostly to
make sure that they do get set to NULL before they become invalid. But
in master, there's one case in procsignal_sigusr1_handler that lacks a
NULL guard, so add that.
Patch by me; review by Tom Lane.
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
Rename PGXACT->inCommit flag into delayChkpt flag,
and generalise comments to allow use in other situations,
such as the forthcoming potential use in checksum patch.
Replace wait loop to look for VXIDs with delayChkpt set.
No user visible changes, not behaviour changes at present.
Simon Riggs, reviewed and rebased by Jeff Davis
In the previous coding, new backend processes would attempt to create their
self-pipe during the OwnLatch call in InitProcess. However, pipe creation
could fail if the kernel is short of resources; and the system does not
recover gracefully from a FATAL error right there, since we have armed the
dead-man switch for this process and not yet set up the on_shmem_exit
callback that would disarm it. The postmaster then forces an unnecessary
database-wide crash and restart, as reported by Sean Chittenden.
There are various ways we could rearrange the code to fix this, but the
simplest and sanest seems to be to split out creation of the self-pipe into
a new function InitializeLatchSupport, which must be called from a place
where failure is allowed. For most processes that gets called in
InitProcess or InitAuxiliaryProcess, but processes that don't call either
but still use latches need their own calls.
Back-patch to 9.1, which has only a part of the latch logic that 9.2 and
HEAD have, but nonetheless includes this bug.
The old message was at DEBUG2, so typically it didn't show up in the
log at all. As a result, in most cases where autovacuum was canceled,
the only information that was logged was the table being vacuumed,
with no indication as to what problem caused the cancel. Crank up
the level to LOG and add some more details to assist with debugging.
Back-patch all the way, per discussion on pgsql-hackers.
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
Commit 6d90eaaa89 added a hibernation mode
to the bgwriter to reduce the server's idle-power consumption. However,
its interaction with the detailed behavior of BgBufferSync's feedback
control loop wasn't very well thought out. That control loop depends
primarily on the rate of buffer allocation, not the rate of buffer
dirtying, so the hibernation mode has to be designed to operate only when
no new buffer allocations are happening. Also, the check for whether the
system is effectively idle was not quite right and would fail to detect
a constant low level of activity, thus allowing the bgwriter to go into
hibernation mode in a way that would let the cycle time vary quite a bit,
possibly further confusing the feedback loop. To fix, move the wakeup
support from MarkBufferDirty and SetBufferCommitInfoNeedsSave into
StrategyGetBuffer, and prevent the bgwriter from entering hibernation mode
unless no buffer allocations have happened recently.
In addition, fix the delaying logic to remove the problem of possibly not
responding to signals promptly, which was basically caused by trying to use
the process latch's is_set flag for multiple purposes. I can't prove it
but I'm suspicious that that hack was responsible for the intermittent
"postmaster does not shut down" failures we've been seeing in the buildfarm
lately. In any case it did nothing to improve the readability or
robustness of the code.
In passing, express the hibernation sleep time as a multiplier on
BgWriterDelay, not a constant. I'm not sure whether there's any value in
exposing the longer sleep time as an independently configurable setting,
but we can at least make it act like this for little extra code.
This patch modifies the walwriter process so that, when it has not found
anything useful to do for many consecutive wakeup cycles, it extends its
sleep time to reduce the server's idle power consumption. It reverts to
normal as soon as it's done any successful flushes. It's still true that
during any async commit, backends check for completed, unflushed pages of
WAL and signal the walwriter if there are any; so that in practice the
walwriter can get awakened and returned to normal operation sooner than the
sleep time might suggest.
Also, improve the checkpointer so that it uses a latch and a computed delay
time to not wake up at all except when it has something to do, replacing a
previous hardcoded 0.5 sec wakeup cycle. This also is primarily useful for
reducing the server's power consumption when idle.
In passing, get rid of the dedicated latch for signaling the walwriter in
favor of using its procLatch, since that comports better with possible
generic signal handlers using that latch. Also, fix a pre-existing bug
with failure to save/restore errno in walwriter's signal handlers.
Peter Geoghegan, somewhat simplified by Tom
Commit 62c7bd31c8 had assorted problems, most
visibly that it broke PREPARE TRANSACTION in the presence of session-level
advisory locks (which should be ignored by PREPARE), as per a recent
complaint from Stephen Rees. More abstractly, the patch made the
LockMethodData.transactional flag not merely useless but outright
dangerous, because in point of fact that flag no longer tells you anything
at all about whether a lock is held transactionally. This fix therefore
removes that flag altogether. We now rely entirely on the convention
already in use in lock.c that transactional lock holds must be owned by
some ResourceOwner, while session holds are never so owned. Setting the
locallock struct's owner link to NULL thus denotes a session hold, and
there is no redundant marker for that.
PREPARE TRANSACTION now works again when there are session-level advisory
locks, and it is also able to transfer transactional advisory locks to the
prepared transaction, but for implementation reasons it throws an error if
we hold both types of lock on a single lockable object. Perhaps it will be
worth improving that someday.
Assorted other minor cleanup and documentation editing, as well.
Back-patch to 9.1, except that in the 9.1 branch I did not remove the
LockMethodData.transactional flag for fear of causing an ABI break for
any external code that might be examining those structs.
The previous code could cause a backend crash after BEGIN; SAVEPOINT a;
LOCK TABLE foo (interrupted by ^C or statement timeout); ROLLBACK TO
SAVEPOINT a; LOCK TABLE foo, and might have leaked strong-lock counts
in other situations.
Report by Zoltán Böszörményi; patch review by Jeff Davis.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
In assert-enabled builds, we assert during the shutdown sequence that
the queues have been properly emptied, and during process startup that
we are inheriting empty queues. In non-assert enabled builds, we just
save a few cycles.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
Improve the documentation around weak-memory-ordering risks, and do a pass
of general editorialization on the comments in the latch code. Make the
Windows latch code more like the Unix latch code where feasible; in
particular provide the same Assert checks in both implementations.
Fix poorly-placed WaitLatch call in syncrep.c.
This patch resolves, for the moment, concerns around weak-memory-ordering
bugs in latch-related code: we have documented the restrictions and checked
that existing calls meet them. In 9.2 I hope that we will install suitable
memory barrier instructions in SetLatch/ResetLatch, so that their callers
don't need to be quite so careful.
This kluge was inserted in a spot apparently chosen at random: the lock
manager's state is not yet fully set up for the wait, and in particular
LockWaitCancel hasn't been armed by setting lockAwaited, so the ProcLock
will not get cleaned up if the ereport is thrown. This seems to not cause
any observable problem in trivial test cases, because LockReleaseAll will
silently clean up the debris; but I was able to cause failures with tests
involving subtransactions.
Fixes breakage induced by commit c85c941470.
Back-patch to all affected branches.
It was initialized in the wrong place and to the wrong value. With bad
luck this could result in incorrect query-cancellation failures in hot
standby sessions, should a HS backend be holding pin on buffer number 1
while trying to acquire a lock.
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
There's no need to add space for startupBufferPinWaitBufId, because
it's part of the PROC_HDR object for which this function already
allocates space.
This has been wrong for a while, but the only consequence is that our
shared memory allocation is increased by 4 bytes, so no back-patch.
The old code creates three separate arrays when only one is needed,
using two different shmem allocation functions for no obvious reason.
It also strangely splits up the initialization of AuxilaryProcs
between the top and bottom of the function to no evident purpose.
Review by Tom Lane.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
They share the same locking namespace with the existing session-level
advisory locks, but they are automatically released at the end of the
current transaction and cannot be released explicitly via unlock
functions.
Marko Tiikkaja, reviewed by me.
There is no reason that proc.c should have to get involved in this dirty hack
for letting the postmaster know which children are walsenders. Revert that
file to the way it was, and confine the kluge to pmsignal.c and postmaster.c.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
During Hot Standby we need to check for buffer pin deadlocks when the
Startup process begins to wait, in case it never wakes up again. We
previously made the deadlock check immediately on the basis it was
cheap, though clearer thinking and prima facie evidence shows that
was too simple. Refactor existing code to make it easy to add in
deferral of deadlock check until deadlock_timeout allowing a good
reduction in deadlock checks since far few buffer pins are held for
that duration. It's worth doing anyway, though major goal is to
prevent further reports of context switching with high numbers of
users on occasional tests.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
process. If startup waits on a buffer pin we send a request to all
backends to cancel themselves if they are holding the buffer pin
required and they are also waiting on a lock. If not, startup waits
until max_standby_delay before cancelling any backend waiting for
the requested buffer pin.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
Conflict reason is passed through directly to the backend, so we can
take decisions about the effect of the conflict based upon the local
state. No specific changes, as yet, though this prepares for later work.
CancelVirtualTransaction() sends signals while holding ProcArrayLock.
Introduce errdetail_abort() to give message detail explaining that the
abort was caused by conflict processing. Remove CONFLICT_MODE states
in favour of using PROCSIG_RECOVERY_CONFLICT states directly, for clarity.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
a backend has done exit(0) or exit(1) without having disengaged itself
from shared memory. We are at risk for this whenever third-party code is
loaded into a backend, since such code might not know it's supposed to go
through proc_exit() instead. Also, it is reported that under Windows
there are ways to externally kill a process that cause the status code
returned to the postmaster to be indistinguishable from a voluntary exit
(thank you, Microsoft). If this does happen then the system is probably
hosed --- for instance, the dead session might still be holding locks.
So the best recovery method is to treat this like a backend crash.
The dead man switch is armed for a particular child process when it
acquires a regular PGPROC, and disarmed when the PGPROC is released;
these should be the first and last touches of shared memory resources
in a backend, or close enough anyway. This choice means there is no
coverage for auxiliary processes, but I doubt we need that, since they
shouldn't be executing any user-provided code anyway.
This patch also improves the management of the EXEC_BACKEND
ShmemBackendArray array a bit, by reducing search costs.
Although this problem is of long standing, the lack of field complaints
seems to mean it's not critical enough to risk back-patching; at least
not till we get some more testing of this mechanism.
replication patch needs a signal, but we've already used SIGUSR1 and
SIGUSR2 in normal backends. This patch allows reusing SIGUSR1 for that,
and for other purposes too if the need arises.
allowed different processes to have different addresses for the shmem segment
in quite a long time, but there were still a few places left that used the
old coding convention. Clean them up to reduce confusion and improve the
compiler's ability to detect pointer type mismatches.
Kris Jurka
whether to execute an immediate interrupt, rather than testing whether
LockWaitCancel() cancelled a lock wait. The old way misclassified the case
where we were blocked in ProcWaitForSignal(), and arguably would misclassify
any other future additions of new ImmediateInterruptOK states too. This
allows reverting the old kluge that gave LockWaitCancel() a return value,
since no callers care anymore. Improve comments in the various
implementations of PGSemaphoreLock() to explain that on some platforms, the
assumption that semop() exits after a signal is wrong, and so we must ensure
that the signal handler itself throws elog if we want cancel or die interrupts
to be effective. Per testing related to bug #3883, though this patch doesn't
solve those problems fully.
Perhaps this change should be back-patched, but since pre-8.3 branches aren't
really relying on autovacuum to respond to SIGINT, it doesn't seem critical
for them.
having several of them. Add two more flags: whether the process is
executing an ANALYZE, and whether a vacuum is for Xid wraparound (which
is obviously only set by autovacuum).
Sneakily move the worker's recently-acquired PostAuthDelay to a more useful
place.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
even if the "deadlock detected" ERROR message is suppressed by an exception
catcher. Be clearer about the event sequence when a soft deadlock is fixed:
the fixing process might or might not still have to wait, so log that
separately. Fix race condition when someone releases us from the lock partway
through printing all this junk --- we'd not get confused about our state, but
the log message sequence could have been misleading, ie, a "still waiting"
message with no subsequent "acquired" message. Greg Stark and Tom Lane.
test seems inessential right now since the only control path for not
getting the lock is via CHECK_FOR_INTERRUPTS which won't return control
to ProcSleep, but it would be important if we ever allow the deadlock
code to kill someone else's transaction instead of our own.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
processes to be running simultaneously. Also, now autovacuum processes do not
count towards the max_connections limit; they are counted separately from
regular processes, and are limited by the new GUC variable
autovacuum_max_workers.
The launcher now has intelligence to launch workers on each database every
autovacuum_naptime seconds, limited only on the max amount of worker slots
available.
Also, the global worker I/O utilization is limited by the vacuum cost-based
delay feature. Workers are "balanced" so that the total I/O consumption does
not exceed the established limit. This part of the patch was contributed by
ITAGAKI Takahiro.
Per discussion.
are in their commit critical sections via flags in the ProcArray. Checkpoint
can watch the ProcArray to determine when it's safe to proceed. This is
a considerably better solution to the original problem of race conditions
between checkpoint and transaction commit: it speeds up commit, since there's
one less lock to fool with, and it prevents the problem of checkpoint being
delayed indefinitely when there's a constant flow of commits. Heikki, with
some kibitzing from Tom.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
Robert Haas
Tom Lane
Bruce Momjian
Andres Freund
Heikki Linnakangas
Fujii Masao
Stephen Frost
Alvaro Herrera
Simon Riggs
Peter Eisentraut
Itagaki Takahiro
Magnus Hagander
Neil Conway