and 1370 (timestamp(datetime)). This does not force an initdb, exactly,
but you won't see the effects of the bug fix until you do one.
BTW, OID 1358 for timespan(time) is still broken:
select timespan('21:11:26'::time);
ERROR: No such function 'time_timespan' with the specified attributes
But I couldn't figure out what it ought to be defined as, so I left it be.
references or CASE expressions, didn't parenthesize complex expressions
properly. Also, always output variable references as fully qualified
names to eliminate ambiguity bug recently reported. (This could be
smarter, but reliability comes first.)
Most parts of the planner should ignore, or indeed never even see, uplevel
Vars because they will be or have been replaced by Params. There were a
couple of places that got it wrong though, probably my fault from recent
changes...
last loop which would return the *first* surviving-to-that-point candidate
regardless of which one actually passed the test. This was producing
such curious results as 'oid % 2' getting translated to 'int2(oid) % 2'.
documented intepretation of the lefthand and oper fields. Fix a number of
obscure problems while at it --- for example, the old code failed if the parser
decided to insert a type-coercion function just below the operator of a
SubLink.
CAUTION: this will break stored rules that contain subplans. You may
need to initdb.
It will keep track the number of pages allocated so that
vacuum could allocate twice of the previous allocation.
This will greatly reduce the total memory consumption of
vacuum.
ALLOC_BIGCHUNK_LIMIT are always allocated as separate malloc() blocks,
and are free()d immediately upon pfree(). Also, if such a chunk is enlarged
with repalloc(), translate the operation into a realloc() so as to
minimize memory usage. Of course, these large chunks still get freed
automatically if the alloc set is reset.
I have set ALLOC_BIGCHUNK_LIMIT at 64K for now, but perhaps another
size would be better?
match then it tried for a self-commutative operator with the reversed input
data types. This is pretty silly; there could never be such an operator,
except maybe in binary-compatible-type scenarios, and we have oper_inexact
for that. Besides which, the oprsanity regress test would complain about
such an operator. Remove nonfunctional code and simplify routine calling
convention accordingly.
and fix_opids processing to a single recursive pass over the plan tree
executed at the very tail end of planning, rather than haphazardly here
and there at different places. Now that tlist Vars do not get modified
until the very end, it's possible to get rid of the klugy var_equal and
match_varid partial-matching routines, and just use plain equal()
throughout the optimizer. This is a step towards allowing merge and
hash joins to be done on expressions instead of only Vars ...
sort order down into planner, instead of handling it only at the very top
level of the planner. This fixes many things. An explicit sort is now
avoided if there is a cheaper alternative (typically an indexscan) not
only for ORDER BY, but also for the internal sort of GROUP BY. It works
even when there is no other reason (such as a WHERE condition) to consider
the indexscan. It works for indexes on functions. It works for indexes
on functions, backwards. It's just so cool...
CAUTION: I have changed the representation of SortClause nodes, therefore
THIS UPDATE BREAKS STORED RULES. You will need to initdb.
above a Sort or Materialize node. As far as I can tell, the only place
that actually needed that was set_tlist_references, which was being lazy
about checking to see if it had a noname node to fix or not...
store all ordering information in pathkeys lists (which are now lists of
lists of PathKeyItem nodes, not just lists of lists of vars). This was
a big win --- the code is smaller and IMHO more understandable than it
was, even though it handles more cases. I believe the node changes will
not force an initdb for anyone; planner nodes don't show up in stored
rules.
commuted (ie, the index var appears on the right). These are now handled
the same way as merge and hash join quals that need to be commuted: the
actual reversing of the clause only happens if we actually choose the path
and generate a plan from it. Furthermore, the clause is only reversed in
the 'indexqual' field of the plan, not in the 'indxqualorig' field. This
allows the clause to still be recognized and removed from qpquals of upper
level join plans. Also, simplify and generalize match_clause_to_indexkey;
now it recognizes binary-compatible indexes for join as well as restriction
clauses.
contains much code that looks like it will handle indexquals with the index
key on either side of the operator, in fact indexquals must have the index
key on the left because of limitations of the ScanKey machinery. Perhaps
someone will be motivated to fix that someday...
work under a wider range of scenarios than it did --- it formerly did not
handle a multi-pass inner scan, nor cases in which the inner scan's
indxqualorig or non-index qual contained outer var references. I am not
sure that these limitations could be hit in the existing optimizer, but
they need to be fixed for future expansion.
> >
> > was implemented by Jan Wieck.
> > His work is for ascending order cases.
> >
> > Here is a patch to prevent sorting also in descending
> > order cases.
> > Because I had already changed _bt_first() to position
> > backward correctly before v6.5,this patch would work.
> >
Hiroshi Inoue
Inoue@tpf.co.jp
multi-scan indexscan plans; it tried to use the same table-to-index
attribute mapping for all the scans, even if they used different indexes.
It would klugily work as long as OR indexquals never used multikey indexes,
but that's not likely to hold up much longer...
to go along with expression_tree_walker. (_walker is not suitable for
routines that need to alter the tree structure significantly.) Other minor
cleanups in clauses.c.
Also, move responsibility for calling vc_abort into main xact.c list of
things-to-call-at-abort. What in the world was it doing down inside of
TransactionIdAbort()?
hashjoinable clause, not one path for a randomly-chosen element of each
set of clauses with the same join operator. That is, if you wrote
SELECT ... WHERE t1.f1 = t2.f2 and t1.f3 = t2.f4,
and both '=' ops were the same opcode (say, all four fields are int4),
then the system would either consider hashing on f1=f2 or on f3=f4,
but it would *not* consider both possibilities. Boo hiss.
Also, revise estimation of hashjoin costs to include a penalty when the
inner join var has a high disbursion --- ie, the most common value is
pretty common. This tends to lead to badly skewed hash bucket occupancy
and way more comparisons than you'd expect on average.
I imagine that the cost calculation still needs tweaking, but at least
it generates a more reasonable plan than before on George Young's example.
(it should just call the given operator, not look up an = operator).
Fix intltsel() so that all numeric data types are converted to double
before trying to estimate where the given comparison value is in the
known range of column values. intltsel() still needs work, or replacement,
for non-numeric data types ... but for nonintegral numeric types it
should now be delivering reasonable estimates.
configure.in to determine if a system is ELF or not. Note that some
of the tests earlier may be redundant but I took the safest route.
D'Arcy J.M. Cain
neqsel now behave as per my suggestions in pghackers a few days ago.
selectivity for < > <= >= should work OK for integral types as well, but
still need work for nonintegral types. Since these routines have never
actually executed before :-(, this may result in some significant changes
in the optimizer's choices of execution plans. Let me know if you see
any serious misbehavior.
CAUTION: THESE CHANGES REQUIRE INITDB. pg_statistic table has changed.
so that Case works in WHERE join clauses. Temporary patch --- this routine
is one of many that ought to be changed to use centralized expression-tree-
walking logic.
rels that the inner path needs to join to, but it was only checking for
the first one. Failure could only have been observed with an OR-clause
that mentions 3 or more tables, and then only if the bogus path was
actually selected as cheapest ...
optimizer rather than parser. This has many advantages, such as not
getting fooled by chance uses of operator names ~ and ~~ (the operators
are identified by OID now), and not creating useless comparison operations
in contexts where the comparisons will not actually be used as indexquals.
The new code also recognizes exact-match LIKE and regex patterns, and
produces an = indexqual instead of >= and <=.
This change does NOT fix the problem with non-ASCII locales: the code
still doesn't know how to generate an upper bound indexqual for non-ASCII
collation order. But it's no worse than before, just the same deficiency
in a different place...
Also, dike out loc_restrictinfo fields in Plan nodes. These were doing
nothing useful in the absence of 'expensive functions' optimization,
and they took a considerable amount of processing to fill in.
The only place it was being used was as temporary storage in indxpath.c,
and the logic was wrong: the same restrictinfo node could get chosen to
carry the info for two different joins. Right fix is to return a second
list of unjoined-relids parallel to the list of clause groups.
identified by Hiroshi (incorrect cost attributed to OR clauses
after multiple passes through set_rest_selec()). I think the code
was trying to allow selectivities of OR subclauses to be passed in
from outside, but noplace was actually passing any useful data, and
set_rest_selec() was passing wrong data.
Restructure representation of "indexqual" in IndexPath nodes so that
it is the same as for indxqual in completed IndexScan nodes: namely,
a toplevel list with an entry for each pass of the index scan, having
sublists that are implicitly-ANDed index qual conditions for that pass.
You don't want to know what the old representation was :-(
Improve documentation of OR-clause indexscan functions.
Remove useless 'notclause' field from RestrictInfo nodes. (This might
force an initdb for anyone who has stored rules containing RestrictInfos,
but I do not think that RestrictInfo ever appears in completed plans.)
the query string to handle any length, I discovered that under certain
conditions, psql will core dump when handling long strings. Thus, the
patch. It was caused by a buffer overrun, probably not noticeable in a lot
of cases, but pretty noticeable in mine.
Problem was caused by the fact that the length check is only performed after
the check for a ; to get the end of the query and execute.
Cheers...
MikeA
support, but which the grammar was accepting. Also, fix several bugs
having to do with failure to copy fields up from a subselect to a select
or insert node.
of the SELECT part of the statement is just like a plain SELECT. All
INSERT-specific processing happens after the SELECT parsing is done.
This eliminates many problems, e.g. INSERT ... SELECT ... GROUP BY using
the wrong column labels. Ensure that DEFAULT clauses are coerced to
the target column type, whether or not stored clause produces the right
type. Substantial cleanup of parser's array support.
creates a reduce/reduce conflict, which I resolved by changing the
'AexprConst -> Typename Sconst' rule to 'AexprConst -> SimpleTypename Sconst'.
In other words, a subscripted type declaration can't be used in that
syntax any longer. This seems a small price to pay for not having to
qualify subscripted columns anymore.
Other cleanups: rename res_target_list to update_target_list, and remove
productions for variants that are not legal in an UPDATE target list;
rename res_target_list2 to plain target_list; delete position_expr
in favor of using b_expr in that production; merge opt_indirection
into attr nonterminal, since there are no places where an unsubscripted
attr is wanted; fix typos in Param support; change case_arg so that
an arbitrary a_expr is allowed, not only a column name.
care of equal-key cases, eliminating bt_firsteq(). The linear search
formerly done by bt_firsteq() took a lot of time in the case where many
equal keys appear on the same page.
Tom Lane
Tatsuo Ishii
Bruce Momjian
Thomas G. Lockhart
Vadim B. Mikheev
Michael Meskes
Marc G. Fournier