Use a macro to generate the in and out functions for pseudotypes that
reject all input and output, saving many lines of redundant code.
Parameterize the error messages to reduce translatable strings.
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
tsquery_rewrite() tries to find matches to subsets of AND/OR conditions;
for example, in the query 'a | b | c' the substitution subquery 'a | c'
should match and lead to replacement of the first and third items.
That's fine, but the matching algorithm apparently takes about O(2^N)
for an N-clause query (I say "apparently" because the code is also both
unintelligible and uncommented). We could probably do better than that
even without any extra assumptions --- but actually, we know that the
subclauses are sorted, indeed are depending on that elsewhere in this very
same function. So we can just scan the two lists a single time to detect
matches, as though we were doing a merge join.
Also do a re-flattening call (QTNTernary()) in tsquery_rewrite_query, just
to make sure that the tree fits the expectations of the next search cycle.
I didn't try to devise a test case for this, but I'm pretty sure that the
oversight could have led to failure to match in some cases where a match
would be expected.
Improve comments, and also stick a CHECK_FOR_INTERRUPTS into
dofindsubquery, just in case it's still too slow for somebody.
Per report from Andreas Seltenreich. Back-patch to all supported branches.
Discussion: <8760oasf2y.fsf@credativ.de>
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
In the previous coding, if an aggregate's transition function returned an
expanded array, nodeAgg.c and nodeWindowAgg.c would always copy it and thus
force it into the flat representation. This led to ping-ponging between
flat and expanded formats, which costs a lot. For an aggregate using
array_append as transition function, I measured about a 15X slowdown
compared to the pre-9.5 code, when working on simple int[] arrays.
Of course, the old code was already O(N^2) in this usage due to copying
flat arrays all the time, but it wasn't quite this inefficient.
To fix, teach nodeAgg.c and nodeWindowAgg.c to allow expanded transition
values without copying, so long as the transition function takes care to
return the transition value already properly parented under the aggcontext.
That puts a bit of extra responsibility on the transition function, but
doing it this way allows us to not need any extra logic in the fast path
of advance_transition_function (ie, with a pass-by-value transition value,
or with a modified-in-place pass-by-reference value). We already know
that that's a hot spot so I'm loath to add any cycles at all there. Also,
while only array_append currently knows how to follow this convention,
this solution allows other transition functions to opt-in without needing
to have a whitelist in the core aggregation code.
(The reason we would need a whitelist is that currently, if you pass a
R/W expanded-object pointer to an arbitrary function, it's allowed to do
anything with it including deleting it; that breaks the core agg code's
assumption that it should free discarded values. Returning a value under
aggcontext is the transition function's signal that it knows it is an
aggregate transition function and will play nice. Possibly the API rules
for expanded objects should be refined, but that would not be a
back-patchable change.)
With this fix, an aggregate using array_append is no longer O(N^2), so it's
much faster than pre-9.5 code rather than much slower. It's still a bit
slower than the bespoke infrastructure for array_agg, but the differential
seems to be only about 10%-20% rather than orders of magnitude.
Discussion: <6315.1477677885@sss.pgh.pa.us>
Despite the argumentation I wrote in commit 7a2fe85b0, it's unsafe to do
this, because in corner cases it's possible for HeapTupleSatisfiesSelf
to try to set hint bits on the target tuple; and at least since 8.2 we
have required the buffer content lock to be held while setting hint bits.
The added regression test exercises one such corner case. Unpatched, it
causes an assertion failure in assert-enabled builds, or otherwise would
cause a hint bit change in a buffer we don't hold lock on, which given
the right race condition could result in checksum failures or other data
consistency problems. The odds of a problem in the field are probably
pretty small, but nonetheless back-patch to all supported branches.
Report: <19391.1477244876@sss.pgh.pa.us>
IANA got rid of the really silly "abbreviation" and replaced it with one
that's only moderately silly. But it's still pointless, so keep on not
showing it.
CommandId is declared as uint32, and values up to 4G are indeed legal.
cidout() handles them properly by treating the value as unsigned int.
But cidin() was just using atoi(), which has platform-dependent behavior
for values outside the range of signed int, as reported by Bart Lengkeek
in bug #14379. Use strtoul() instead, as xidin() does.
In passing, make some purely cosmetic changes to make xidin/xidout
look more like cidin/cidout; the former didn't have a monopoly on
best practice IMO.
Neither xidin nor cidin make any attempt to throw error for invalid input.
I didn't change that here, and am not sure it's worth worrying about
since neither is really a user-facing type. The point is just to ensure
that indubitably-valid inputs work as expected.
It's been like this for a long time, so back-patch to all supported
branches.
Report: <20161018152550.1413.6439@wrigleys.postgresql.org>
bitshiftright() and bitshiftleft() would recursively call each other
infinitely if the user passed INT_MIN for the shift amount, due to integer
overflow in negating the shift amount. To fix, clamp to -VARBITMAXLEN.
That doesn't change the results since any shift distance larger than the
input bit string's length produces an all-zeroes result.
Also fix some places that seemed inadequately paranoid about input typmods
exceeding VARBITMAXLEN. While a typmod accepted by anybit_typmodin() will
certainly be much less than that, at least some of these spots are
reachable with user-chosen integer values.
Andreas Seltenreich and Tom Lane
Discussion: <87d1j2zqtz.fsf@credativ.de>
Commit 0b62fd036 did a fairly sloppy job of refactoring setPath()
to support jsonb_insert() along with jsonb_set(). In its defense,
though, there was no regression test case exercising the case of
replacing an existing element in a jsonb array.
Per bug #14366 from Peng Sun. Back-patch to 9.6 where bug was introduced.
Report: <20161012065349.1412.47858@wrigleys.postgresql.org>
These functions were originally added in commit d8cedf67a to support
use of int2vector columns as catcache lookup keys. However, there are
no catcaches that use such columns. (Indeed I now think it must always
have been dead code: a catcache with such a key column would need an
underlying unique index on the column, but we've never had an int2vector
btree opclass.)
Getting rid of the int2vector-specific operator and function does not
lose any functionality, because operations on int2vectors will now fall
back to the generic anyarray support. This avoids a wart that a btree
index on an int2vector column (made using anyarray_ops) would fail to
match equality searches, because int2vectoreq wasn't a member of the
opclass. We don't really care much about that, since int2vector is not
meant as a type for users to use, but it's silly to have extra code and
less functionality.
If we ever do want a catcache to be indexed by an int2vector column,
we'd need to put back full btree and hash opclasses for int2vector,
comparable to the support for oidvector. (The anyarray code can't be
used at such a low level, because it needs to do catcache lookups.)
But we'll deal with that if/when the need arises.
Also worth noting is that removal of the hash int2vector_ops opclass will
break any user-created hash indexes on int2vector columns. While hash
anyarray_ops would serve the same purpose, it would probably not compute
the same hash values and thus wouldn't be on-disk-compatible. Given that
int2vector isn't a user-facing type and we're planning other incompatible
changes in hash indexes for v10 anyway, this doesn't seem like something
to worry about, but it's probably worth mentioning here.
Amit Langote
Discussion: <d9bb74f8-b194-7307-9ebd-90645d377e45@lab.ntt.co.jp>
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Add a validity flag to DCHCacheEntry and NUMCacheEntry entries, and
do not set it true until after we've parsed the supplied format string.
This allows dealing with possible errors while parsing the format
without the baroque hack that was there before (which only covered
errors within NUMDesc_prepare, anyway). We can get rid of the PG_TRY in
NUMDesc_prepare, as well as last_NUMCacheEntry and NUM_cache_remove.
(Essentially, this reverts commit ff783fbae in favor of a less fragile
solution; the problems with that approach are well illustrated by later
hacking such as 55f927a46.)
In passing, define the size of these caches as DCH_CACHE_ENTRIES not
DCH_CACHE_FIELDS + 1 (whoever thought that was a good definition?)
and likewise for the NUM cache. Also const-ify format string parameters
where convenient, and merge duplicated cache lookup logic.
This is primarily driven by a proposed patch from Artur Zakirov,
which introduced some ereport's into format string parsing for
the datetime case. He proposed preventing the creation of invalid
cache entries by parsing the format string first into a local-variable
array, and then copying that to a cache entry. That seemed a bit
ugly to me, and anyway randomly different from the way the identical
problem had been solved for the numeric case. Let's make the two
sets of code more similar not less so.
I'm not sure whether we'll adopt the new error conditions Artur proposes,
but this patch seems like good code cleanup and future-proofing in any
case. The existing code is critically (and undocumented-ly) dependent on
no elog being thrown out of several nontrivial functions, which is trouble
waiting to happen, though it doesn't seem to be actively broken today.
Discussion: <b2a39359-3282-b402-f4a3-057aae500ee7@postgrespro.ru>
Historically, something like to_date('2009-06-40','YYYY-MM-DD') would
return '2009-07-10' because there was no prohibition on out-of-range
month or day numbers. This has been widely panned, and it also turns
out that Oracle throws an error in such cases. Since these functions
are nominally Oracle-compatibility features, let's change that.
There's no particular restriction on year (modulo the fact that the
scanner may not believe that more than 4 digits are year digits,
a matter to be addressed separately if at all). But we now check month,
day, hour, minute, second, and fractional-second fields, as well as
day-of-year and second-of-day fields if those are used.
Currently, no checks are made on ISO-8601-style week numbers or day
numbers; it's not very clear what the appropriate rules would be there,
and they're probably so little used that it's not worth sweating over.
Artur Zakirov, reviewed by Amul Sul, further adjustments by me
Discussion: <1873520224.1784572.1465833145330.JavaMail.yahoo@mail.yahoo.com>
See-Also: <57786490.9010201@wars-nicht.de>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
The money type input function did not have any overflow checks at all.
There were some regression tests that purported to check for overflow,
but they actually checked for the overflow behavior of the int8 type
before casting to money. Remove those unnecessary checks and add some
that actually check the money input function.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Commit dd1a3bccc replaced a test on whether a subroutine returned a
null pointer with a test on whether &pointer->backendStatus was null.
This accidentally failed to fail, at least on common compilers, because
backendStatus is the first field in the struct; but it was surely trouble
waiting to happen. Commit f91feba87 then messed things up further,
changing the logic to
local_beentry = pgstat_fetch_stat_local_beentry(curr_backend);
if (!local_beentry)
continue;
beentry = &local_beentry->backendStatus;
if (!beentry)
{
where the second "if" is now dead code, so that the intended behavior of
printing a row with "<backend information not available>" cannot occur.
I suspect this is all moot because pgstat_fetch_stat_local_beentry
will never actually return null in this function's usage, but it's still
very poor coding. Repair back to 9.4 where the original problem was
introduced.
We have a not-terribly-thoroughly-enforced-yet project policy that internal
errors with SQLSTATE XX000 (ie, plain elog) should not be triggerable from
SQL. record_in, domain_in, and PL validator functions all failed to meet
this standard, because they threw plain elog("cache lookup failed for XXX")
errors on bad OIDs, and those are all invokable from SQL.
For record_in, the best fix is to upgrade typcache.c (lookup_type_cache)
to throw a user-facing error for this case. That seems consistent because
it was more than halfway there already, having user-facing errors for shell
types and non-composite types. Having done that, tweak domain_in to rely
on the typcache to throw an appropriate error. (This costs little because
InitDomainConstraintRef would fetch the typcache entry anyway.)
For the PL validator functions, we already have a single choke point at
CheckFunctionValidatorAccess, so just fix its error to be user-facing.
Dilip Kumar, reviewed by Haribabu Kommi
Discussion: <87wpxfygg9.fsf@credativ.de>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
These were evidently introduced by yesterday's commit 9cca11c91,
which perhaps needs more review than it got.
Per report from Andreas Seltenreich and additional examination
of nearby code.
Report: <87oa45qfwq.fsf@credativ.de>
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
When building libpq, ip.c and md5.c were symlinked or copied from
src/backend/libpq into src/interfaces/libpq, but now that we have a
directory specifically for routines that are shared between the server and
client binaries, src/common/, move them there.
Some routines in ip.c were only used in the backend. Keep those in
src/backend/libpq, but rename to ifaddr.c to avoid confusion with the file
that's now in common.
Fix the comment in src/common/Makefile to reflect how libpq actually links
those files.
There are two more files that libpq symlinks directly from src/backend:
encnames.c and wchar.c. I don't feel compelled to move those right now,
though.
Patch by Michael Paquier, with some changes by me.
Discussion: <69938195-9c76-8523-0af8-eb718ea5b36e@iki.fi>
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Reviewed-by: Andrey Borodin
Discussion: <c0545351-a467-5b76-6d46-4840d1ea8aa4@iki.fi>
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
With Asserts off, these variables are set but never used, resulting
in warnings from pickier compilers. Fix that with our standard solution.
Per report from Jeff Janes.
AF_INET is apparently defined in something that's pulled in automatically
on Linux, but the buildfarm says that's not true everywhere. Comparing
to network_gist.c suggests that including <sys/socket.h> ought to fix it,
and the POSIX standard concurs.
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Emre Hasegeli
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
I'm not sure which bozo thought it's a problem to use strtol() only
for its endptr result, but silence the warning using same method
used elsewhere.
Report: <f845d3a6-5328-3e2a-924f-f8e91aa2b6d2@2ndquadrant.com>
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
Several places in NUM_numpart_from_char(), which is called from the SQL
function to_number(text, text), could accidentally read one byte past
the end of the input buffer (which comes from the input text datum and
is not null-terminated).
1. One leading space character would be skipped, but there was no check
that the input was at least one byte long. This does not happen in
practice, but for defensiveness, add a check anyway.
2. Commit 4a3a1e2cf apparently accidentally doubled that code that skips
one space character (so that two spaces might be skipped), but there
was no overflow check before skipping the second byte. Fix by
removing that duplicate code.
3. A logic error would allow a one-byte over-read when looking for a
trailing sign (S) placeholder.
In each case, the extra byte cannot be read out directly, but looking at
it might cause a crash.
The third item was discovered by Piotr Stefaniak, the first two were
found and analyzed by Tom Lane and Peter Eisentraut.
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
This is required for the result to be a legal tsvector value.
Noted while fooling with Andreas Seltenreich's ts_delete() crash.
Discussion: <87invhoj6e.fsf@credativ.de>
Such cases either failed an Assert, or produced a corrupt tsvector in
non-Assert builds, as reported by Andreas Seltenreich. The reason is
that tsvector_delete_by_indices() just assumed that its input array had
no duplicates. Fix by explicitly de-duping.
In passing, improve some comments, and fix a number of tests for null
values to use ERRCODE_NULL_VALUE_NOT_ALLOWED not
ERRCODE_INVALID_PARAMETER_VALUE.
Discussion: <87invhoj6e.fsf@credativ.de>
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
Previously, some functions returned various fixed strings and others
failed with a cache lookup error. Per discussion, standardize on
returning NULL. Although user-exposed "cache lookup failed" error
messages might normally qualify for bug-fix treatment, no back-patch;
the risk of breaking user code which is accustomed to the current
behavior seems too high.
Michael Paquier
The Assert() here seems unreasonably optimistic. Andreas Seltenreich
found that it could fail with NaNs in the input geometries, and it
seems likely to me that it might fail in corner cases due to roundoff
error, even for ordinary input values. As a band-aid, make the function
return SQL NULL instead of crashing.
Report: <87d1md1xji.fsf@credativ.de>
