In the event the llvm option is defined to be 'auto', it is possible
that the host machine might not have a C++ compiler. If that is the
case, then we shouldn't continue reaching for the llvm dependency.
To make it easier to understand the case where LLVM support is disabled due to
lacking a C++ compiler, add a message noting that fact.
Author: Tristan Partin <tristan@neon.tech>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Backpatch: 16-, where meson support was added
That was already done in a lot of places, but not all.
Backpatch this to keep the the meson files aligned as long as reasonably
possible.
Author: Tristan Partin <tristan@neon.tech>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Backpatch: 16-, where meson support was added
The errhint example wasn't using the mandated style for errhint
which was needlessly confusing. Fix by rewriting it using the
mandated style.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F02F4B4F-7B7E-406A-B25A-FF2AA300AB9A@yesql.se
The special handling of negative attribute numbers in
ATExecAddColumn() was introduced to support SET WITH OIDS (commit
6d1e361852). But that feature doesn't exist anymore, so we can revert
to the previous, simpler version. In passing, also remove an obsolete
comment about OID support.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
Previously we only allowed unique B-tree constraints on partitions
(and only if the constraint included all the partition keys). But we
could allow exclusion constraints with the same restriction. We also
require that those columns be compared for equality, not something
like &&.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/ec8b1d9b-502e-d1f8-e909-1bf9dffe6fa5@illuminatedcomputing.com
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
As coded, the row data strings generated for pgbench_accounts' COPY in
the client-side data generation were always assigning 0 for one of its
attributes. This simplifies a bit an upcoming patch to switch
client-side data generation of pgbench to use COPY for the teller and
branch tables, rather than individual INSERTs.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
This commit adds two columns: indexes_total and indexes_processed, to
pg_stat_progress_vacuum system view to show the index vacuum
progress. These numbers are reported in the "vacuuming indexes" and
"cleaning up indexes" phases.
This uses the new parallel message type for progress reporting added
by be06506e7.
Bump catversion because this changes the definition of
pg_stat_progress_vacuum.
Author: Sami Imseih
Reviewed by: Masahiko Sawada, Michael Paquier, Nathan Bossart, Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
This commit adds a new type of parallel message 'P' to allow a
parallel worker to poke at a leader to update the progress.
Currently it supports only incremental progress reporting but it's
possible to allow for supporting of other backend progress APIs in the
future.
There are no users of this new message type as of this commit. That
will follow in future commits.
Idea from Andres Freund.
Author: Sami Imseih
Reviewed by: Michael Paquier, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
In test_decoding module, when skip_empty_xacts option was specified, add
BEGIN/COMMIT for transactional messages. This makes the handling of
transactional messages consistent irrespective of whether skip_empty_xacts
option was specified.
We decided not to backpatch this change because skip_empty_xacts is
primarily used to have consistent test results across different runs and
this change won't help with that.
Author: Vignesh C
Reviewed-by: Ashutosh Bapat, Hou Zhijie
Discussion: https://postgr.es/m/CAExHW5ujRhbOz6_aTq_jQA8NjeFqq9d_8G9viShWvXx8gdSXiQ@mail.gmail.com
Windows has similar functions with leading underscores. Previously, we
provided the rename via a macro in win32_port.h. In fact its functions
are not always good replacements for the Unix functions, since they
can't deal with UTF-8. They are only currently used by pg_locale.c,
which is careful to redirect to other Windows routines for UTF-8. Given
that portability hazard, it seem unlikely to be a good idea to encourage
any other code to think of these functions as being available outside
pg_locale.c. Any code that thinks it wants these functions probably
wants our wchar2char() or char2wchar() routines instead, or it won't
actually work on Windows in UTF-8 databases.
Furthermore, some major libc implementations including glibc don't have
them (they only have the standard variants without _l), so external code
is very unlikely to require them to exist.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKG%2Bt_CHPzEoPnKyARJBJgE9-GxNajJo6ZuSfRK_KWFO%2B6w%40mail.gmail.com
Since PostgresMain calls sigsetjmp, any local variables that are not
marked "volatile" have a risk of unspecified behavior. In practice
this means that when control returns via longjmp, such variables might
get reset to their values as of the time of sigsetjmp, depending on
whether the compiler chose to put them in registers or on the stack.
We were careful about this for "send_ready_for_query", but not the
other local variables.
In the case of the timeout_enabled flags, resetting them to
their initial "false" states is actually good, since we do
"disable_all_timeouts()" in the longjmp cleanup code path. If that
does not happen, we risk uselessly calling "disable_timeout()" later,
which is harmless but a little bit expensive. Let's explicitly reset
these flags so that the behavior is correct and platform-independent.
(This change means that we really don't need the new "volatile"
markings after all, but let's install them anyway since any change
in this logic could re-introduce a problem.)
There is no issue for "firstchar" and "input_message" because those
are explicitly reinitialized each time through the query processing
loop. To make that clearer, move them to be declared inside the loop.
That leaves us with all the function-lifespan locals except the
sigjmp_buf itself marked as volatile, which seems like a good policy
to have going forward.
Because of the possibility of extra disable_timeout() calls, this
seems worth back-patching.
Sergey Shinderuk and Tom Lane
Discussion: https://postgr.es/m/2eda015b-7dff-47fd-d5e2-f1a9899b90a6@postgrespro.ru
changeDependencyFor() returns the number of pg_depend entries changed,
or 0 if there is a problem. The callers of this routine expect only one
dependency to change, but they did not check for the result returned.
The following code paths gain checks:
- Namespace for extensions.
- Namespace for various object types (see AlterObjectNamespace).
- Planner support function for a function.
Some existing error messages related to all that are reworded to be more
consistent with the project style, and the new error messages added
follow the same style. This change has exposed one bug fixed a bit
earlier with bd5ddbe.
Reviewed-by: Heikki Linnakangas, Akshat Jaimini
Discussion: https://postgr.es/m/ZJzD/rn+UbloKjB7@paquier.xyz
As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
The DEFAULT parameter seems most similar to the NULL parameter, so
move it next to it, instead of having it at the end of the parameter
list because it was the last one added.
Comments in src/backend/libpq/auth.c say: (after successfully finding
the final DN to check the user-supplied password against)
/* Unbind and disconnect from the LDAP server */
and later
/*
* Need to re-initialize the LDAP connection, so that we can bind to
* it with a different username.
*/
But the protocol actually permits multiple subsequent authentications
("binds") over a single connection.
So, it seems like the whole connection re-initialization thing was
just a confusion and can be safely removed, thus saving quite a few
network round-trips, especially for the case of ldaps/starttls.
Author: Anatoly Zaretsky <anatoly.zaretsky@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALbq6kmJ-1+58df4B51ctPfTOSyPbY8Qi2=ct8oR=i4TamkUoQ@mail.gmail.com
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
locale_t is defined by POSIX.1-2008 and SUSv4, and available on all
targeted systems. For Windows, win32_port.h redirects to a partial
implementation called _locale_t. We can now remove a lot of
compile-time tests for HAVE_LOCALE_T, and associated comments and dead
code branches that were needed for older computers.
Since configure + MinGW builds didn't detect locale_t but now we assume
that all systems have it, further inconsistencies among the 3 Windows build
systems were revealed. With this commit, we no longer define
HAVE_WCSTOMBS_L and HAVE_MBSTOWCS_L on any Windows build system, but
we have logic to deal with that so that replacements are available where
appropriate.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGLg7_T2GKwZFAkEf0V7vbnur-NfCjZPKZb%3DZfAXSV1ORw%40mail.gmail.com
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
Commit 19d8e2308b allowed a weaker check for HOT with summarizing
indexes, but it did not update README.HOT. So do that now.
Patch by Matthias van de Meent, minor changes by me. Backpatch to 16,
where the optimization was introduced.
Author: Matthias van de Meent
Reviewed-by: Tomas Vondra
Backpatch-through: 16
Discussion: https://postgr.es/m/CAEze2WiEOm8V+c9kUeYp2BPhbEc5s473fUf51xNeqvSFGv44Ew@mail.gmail.com
The comments referring to SSL_CTX_set_cert_cb() in ./configure and
./configure.ac were inconsistent, as `autoreconf -i` would show. While
on it, fix a typo on a comment related to the same check in
meson.build.
Issue introduced in 8e278b6, that removed support for OpenSSL 1.0.1.
Per offlist report from Thomas Munro.
The restrictedToken handle was set but never read, so remove the
variable and change to a boolean style check to match other uses
of CreateRestrictedProcess().
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/62A63C81-3893-4E3F-A34E-2081DF67074E@yesql.se
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
We create a file, so we better WAL-log it. In practice, all the
built-in index AMs and all extensions that I'm aware of write a
metapage to the init fork, which is WAL-logged, and replay of the
metapage implicitly creates the fork too. But if ambuildempty() didn't
write any page, we would miss it.
This can be seen with dummy_index_am. Set up replication, create a
'dummy_index_am' index on an unlogged table, and look at the files
created in the replica: the init fork is not created on the
replica. Dummy_index_am doesn't do anything with the relation files,
however, so it doesn't lead to any user-visible errors.
Backpatch to all supported versions.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
This is useful to show the allocation state of huge pages when setting
up a server with "huge_pages = try", where allocating huge pages would
be attempted but the server would continue its startup sequence even if
the allocation fails. The effective status of huge pages is not easily
visible without OS-level tools (or for instance, a lookup at
/proc/N/smaps), and the environments where Postgres runs may not
authorize that. Like the other GUCs related to huge pages, this works
for Linux and Windows.
This GUC can report as values:
- "on", if huge pages were allocated.
- "off", if huge pages were not allocated.
- "unknown", a special state that could only be seen when using for
example postgres -C because it is only possible to know if the shared
memory allocation worked after we can check for the GUC values, even if
checking a runtime-computed GUC. This value should never be seen when
querying for the GUC on a running server. An assertion is added to
check that.
The discussion has also turned around having a new function to grab this
status, but this would have required more tricks for -DEXEC_BACKEND,
something that GUCs already handle.
Noriyoshi Shinoda has initiated the thread that has led to the result of
this commit.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/TU4PR8401MB1152EBB0D271F827E2E37A01EECC9@TU4PR8401MB1152.NAMPRD84.PROD.OUTLOOK.COM
The header file wait_event_types.h was generated without a newline at
its end, which was inconsistent with all the other things generated
automatically.
Per offline gripe from Nathan Bossart.
This commit reverts the work done by commits 3ba59ccc89 and 72e78d831a.
Those commits were incorrect in asserting that we never acquire any other
heavy-weight lock after acquring page lock other than relation extension
lock. We can acquire a lock on catalogs while doing catalog look up after
acquring page lock.
This won't impact any existing feature but we need to think some other way
to achieve this before parallelizing other write operations or even
improving the parallelism in vacuum (like allowing multiple workers
for an index).
Reported-by: Jaime Casanova
Author: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJKUy5jffnRKNvRHKQ0LynRb0RJC-o4P8Ku3x9vGAVLwDBWumQ@mail.gmail.com
This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
llvm_release_context() called llvm_enter_fatal_on_oom(), but was missing
the corresponding llvm_leave_fatal_on_oom() call. As a result, if JIT was
used at all, we were almost always in the "fatal-on-oom" state.
It only makes a difference if you use an extension written in C++, and
run out of memory in a C++ 'new' call. In that case, you would get a
PostgreSQL FATAL error, instead of the default behavior of throwing a
C++ exception.
Back-patch to all supported versions.
Reviewed-by: Daniel Gustafsson
Discussion: https://www.postgresql.org/message-id/54b78cca-bc84-dad8-4a7e-5b56f764fab5@iki.fi
Most, but not all, of our "/*----" style comments have an end-guard
line with dashes at the end of the comment. However, pgindent doesn't
care about the end-guards, so they mostly just waste screen
space. Going forward, let's not require end-guards.
Remove a broken end-guard in a comment in walsender.c that led me to
think about this. Remove the end guard from another comment in
walsender.c for consistency, so that we use the same style in all
comments in the file.
However, we have thousands of existing "/*----" comments the repository,
so it's not worth the code churn to change them all.
Discussion: https://www.postgresql.org/message-id/fb083c91-d490-3b65-25f3-05e9118b6b0d%40iki.fi
BuildEventTriggerCache sets up a context "EventTriggerCache" which
house a hash named "Event Trigger Cache", which in turn creates a
context with the table name. This generated log output for memory
context dumps like below:
LOG: level: 2; EventTriggerCache: 8192 total in 1 blocks; 7928 free (4 chunks); 264 used
LOG: level: 3; Event Trigger Cache: 8192 total in 1 blocks; 2616 free (0 chunks); 5576 used
This renames the hash to ensure that the hash context has a unique
name for easier log reading and debugging.
Discussion: https://postgr.es/m/5EDC969E-CAE3-4CBD-965E-3B8A1294CFA4@yesql.se
Andres Freund
Daniel Gustafsson
Alvaro Herrera
Peter Eisentraut
Thomas Munro
Michael Paquier
Masahiko Sawada
Amit Kapila
Tom Lane
David Rowley
Andrew Dunstan
Jeff Davis
Nathan Bossart
Tomas Vondra
Heikki Linnakangas