When HS startup is deferred because of overflowed subtransactions, ensure
that we re-initialize KnownAssignedXids for when both existing and incoming
snapshots have non-zero qualifying xids.
Fixes bug #6661 reported by Valentine Gogichashvili.
Analysis and fix by Andres Freund
This provides a speedup of about 4X when NBuffers is large enough.
There is also a useful reduction in sinval traffic, since we
only do CacheInvalidateSmgr() once not once per fork.
Simon Riggs, reviewed and somewhat revised by Tom Lane
DropRelFileNodeBuffers, DropDatabaseBuffers, FlushRelationBuffers, and
FlushDatabaseBuffers have to scan the whole shared_buffers pool because
we have no index structure that would find the target buffers any more
efficiently than that. This gets expensive with large NBuffers. We can
shave some cycles from these loops by prechecking to see if the current
buffer is interesting before we acquire the buffer header lock.
Ordinarily such a test would be unsafe, but in these cases it should be
safe because we are already assuming that the caller holds a lock that
prevents any new target pages from being loaded into the buffer pool
concurrently. Therefore, no buffer tag should be changing to a value of
interest, only away from a value of interest. So a false negative match
is impossible, while a false positive is safe because we'll recheck after
acquiring the buffer lock. Initial testing says that this speeds these
loops by a factor of 2X to 3X on common Intel hardware.
Patch for DropRelFileNodeBuffers by Jeff Janes (based on an idea of
Heikki's); extended to the remaining sequential scans by Tom Lane
WALSender now woken up after each background flush by WALwriter, avoiding
multi-second replication delay for an all-async commit workload.
Replication delay reduced from 7s with default settings to 200ms and often
much less, allowing significantly reduced data loss at failover.
Andres Freund and Simon Riggs
In lazy_scan_heap, we could issue bogus warnings about incorrect
information in the visibility map, because we checked the visibility
map bit before locking the heap page, creating a race condition. Fix
by rechecking the visibility map bit before we complain. Rejigger
some related logic so that we rely on the possibly-outdated
all_visible_according_to_vm value as little as possible.
In heap_multi_insert, it's not safe to clear the visibility map bit
before beginning the critical section. The visibility map is not
crash-safe unless we treat clearing the bit as a critical operation.
Specifically, if the transaction were to error out after we set the
bit and before entering the critical section, we could end up writing
the heap page to disk (with the bit cleared) and crashing before the
visibility map page made it to disk. That would be bad. heap_insert
has this correct, but somehow the order of operations got rearranged
when heap_multi_insert was added.
Also, add some more comments to visibilitymap_test, lazy_scan_heap,
and IndexOnlyNext, expounding on concurrency issues.
Per extensive code review by Andres Freund, and further review by Tom
Lane, who also made the original report about the bogus warnings.
The original coding misbehaved if "char" is signed, and also made the
extremely poor decision to print control characters literally when trying
to complain about them. Report and patch by Shigeru Hanada.
In passing, also fix core dump risk in report_parse_error() should the
parse state be something other than what it expects.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
Re-implements similar functionality in 9.1 and previously which
was removed during split of checkpointer and bgwriter.
Requested/spotted by Magnus Hagander
We allow non-superusers to create procedural languages (with restrictions)
and range datatypes. Previously, the automatically-created support
functions for these objects ended up owned by the creating user. This
represents a rather considerable security hazard, because the owning user
might be able to alter a support function's definition in such a way as to
crash the server, inject trojan-horse SQL code, or even execute arbitrary
C code directly. It appears that right now the only actually exploitable
problem is the infinite-recursion bug fixed in the previous patch for
CVE-2012-2655. However, it's not hard to imagine that future additions of
more ALTER FUNCTION capability might unintentionally open up new hazards.
To forestall future problems, cause these support functions to be owned by
the bootstrap superuser, not the user creating the parent object.
It's not very sensible to set such attributes on a handler function;
but if one were to do so, fmgr.c went into infinite recursion because
it would call fmgr_security_definer instead of the handler function proper.
There is no way for fmgr_security_definer to know that it ought to call the
handler and not the original function referenced by the FmgrInfo's fn_oid,
so it tries to do the latter, causing the whole process to start over
again.
Ordinarily such misconfiguration of a procedural language's handler could
be written off as superuser error. However, because we allow non-superuser
database owners to create procedural languages and the handler for such a
language becomes owned by the database owner, it is possible for a database
owner to crash the backend, which ideally shouldn't be possible without
superuser privileges. In 9.2 and up we will adjust things so that the
handler functions are always owned by superusers, but in existing branches
this is a minor security fix.
Problem noted by Noah Misch (after several of us had failed to detect
it :-(). This is CVE-2012-2655.
We used to only allow offsets less than +/-13 hours, then it was +/14,
then it was +/-15. That's still not good enough though, as per today's bug
report from Patric Bechtel. This time I actually looked through the Olson
timezone database to find the largest offsets used anywhere. The winners
are Asia/Manila, at -15:56:00 until 1844, and America/Metlakatla, at
+15:13:42 until 1867. So we'd better allow offsets less than +/-16 hours.
Given the history, we are way overdue to have some greppable #define
symbols controlling this, so make some ... and also remove an obsolete
comment that didn't get fixed the last time.
Back-patch to all supported branches.
First, the previous code failed to account for the fact that, during Hot
Standby operation, the startup process takes AccessExclusiveLocks on
relations without setting MyDatabaseId. This resulted in fast path
strong lock counts failing to be incremented with the startup process
took locks, which in turn allowed conflicting lock requests to succeed
when they should not have. Report by Erik Rijkers, diagnosis by Heikki
Linnakangas.
Second, LockReleaseAll() failed to honor the allLocks and lockmethodid
restrictions with respect to fast-path locks. It's not clear to me
whether this produces any user-visible breakage at the moment, but it's
certainly wrong. Rearrange order of operations in LockReleaseAll to fix.
Noted by Tom Lane.
We used to mimic the way a stack is constructed when descending the tree
during normal GiST inserts, but that was quite complicated during a buffered
build. It was also wrong: in GiST, the left-to-right relationships on
different levels might not match each other, so that when you know the
parent of a child page, you won't necessarily find the parent of the page to
the right of the child page by following the rightlinks at the parent level.
This sometimes led to "could not re-find parent" errors while building a
GiST index.
We now use a simple hash table to track the parent of every internal page.
Whenever a page is split, and downlinks are moved from one page to another,
we update the hash table accordingly. This is also better for performance
than the old method, as we never need to move right to re-find the parent
page, which could take a significant amount of time for buffers that were
created much earlier in the index build.
There were two bugs here: We forgot to call gistFreeBuildBuffers() function
at the end of build, and we passed interXact == true to BufFileCreateTemp,
so the file wasn't automatically cleaned up at end-of-transaction either.
The result of (maintenance_work_mem * 1024) / BLCKSZ doesn't fit in a signed
32-bit integer, if maintenance_work_mem >= 2GB. Use double instead. And
while we're at it, write the calculations in an easier to understand form,
with the intermediary steps written out and commented.
AbortOutOfAnyTransaction failed to do anything if the state it saw on
entry corresponded to failing partway through StartTransaction. I fixed
AbortCurrentTransaction to cope with that case way back in commit
60b2444cc3, but evidently overlooked that
AbortOutOfAnyTransaction should do likewise.
Back-patch to all supported branches. It's not clear that this omission
has any more-than-cosmetic consequences, but it's also not clear that it
doesn't, so back-patching seems the least risky choice.
Set E081 Basic Privileges to supported, since by the letter of it, we
support it, even though not all possible forms of USAGE privileges are
implemented.
The only interesting-for-performance case wherein we force heapscan here
is when we're rebuilding the relcache init file, and the only such case
that is likely to be examining a catalog big enough to be syncscanned is
RelationBuildTupleDesc. But the early-exit optimization in that code gets
broken if we start the scan at a random place within the catalog, so that
allowing syncscan is actually a big deoptimization if pg_attribute is large
(at least for the normal case where the rows for core system catalogs have
never been changed since initdb). Hence, prevent syncscan here. Per my
testing pursuant to complaints from Jeff Frost and Greg Sabino Mullane,
though neither of them seem to have actually hit this specific problem.
Back-patch to 8.3, where syncscan was introduced.
Previously, casts to name could generate invalidly-encoded results.
Also, make these functions match namein() more exactly, by consistently
using palloc0() instead of ad-hoc zeroing code.
Back-patch to all supported branches.
Karl Schnaitter and Tom Lane
zaptreesubs() was coded to unconditionally reset a capture subre's
corresponding pmatch[] entry. However, in regexes without backrefs, that
array is caller-supplied and might not have as many entries as the regex
has capturing parens. So check the array length and do nothing if there
is no corresponding entry, much as subset() does. Failure to check this
resulted in a stack clobber in the case reported by Marko Kreen.
This bug appears to have been latent in the regex library from the
beginning. It was not exposed because find() called dissect() not
cdissect(), and the dissect() code path didn't ever call zaptreesubs()
(formerly zapmem()). When I unified dissect() and cdissect() in commit
4dd78bf37a, the problem was exposed.
Now that I've seen this, I'm rather suspicious that we might need to
back-patch it; but will refrain for now, for lack of evidence that
the case can be hit in the previous coding.
If a seqscan encounters many consecutive pages containing only dead tuples,
it can remain in the loop in heapgettup for a long time, and there was no
CHECK_FOR_INTERRUPTS anywhere in that loop. This meant there were
real-world situations where a query would be effectively uncancelable for
long stretches. Add a check placed to occur once per page, which should be
enough to provide reasonable response time without adding any measurable
overhead.
Report and patch by Merlin Moncure (though I tweaked it a bit).
Back-patch to all supported branches.
When the column name is an unqualified name, rather than table.column,
the error message complains about too many dotted names, which is
wrong. Report by Peter Eisentraut based on examination of the
sepgsql regression test output, but the problem also affects COMMENT.
New wording as suggested by Tom Lane.
In commit d526575f89, we changed things so
that buffer usage counts are incremented when the buffer is pinned, rather
than when it is unpinned, but the README file didn't get the memo.
Report by Amit Kapila.
There is no reason to do this as early as possible in postmaster startup,
and good reason not to do it until we have completely created the
postmaster's lock file, namely that it might contribute to pg_ctl thinking
that postmaster startup has timed out. (This would require a rather
unusual amount of time to be spent scanning temp file directories, but we
have at least one field report of it happening reproducibly.)
Back-patch to 9.1. Before that, pg_ctl didn't wait for additional info to
be added to the lock file, so it wasn't a problem.
Note that this is not a complete fix to the slow-start issue in 9.1,
because we still had identify_system_timezone being run during postmaster
start in 9.1. But that's at least a reasonably well-defined delay, with
an easy workaround if needed, whereas the temp-files scan is not so
predictable and cannot be avoided.
The accurate info about what's in a lock file has been in miscadmin.h
for some time, so let's just make this comment point there instead of
maintaining a duplicative copy.
When we create a temporary copy of the old node buffer, in stack, we mustn't
leak that into any of the long-lived data structures. Before this patch,
when we called gistPopItupFromNodeBuffer(), it got added to the array of
"loaded buffers". After gistRelocateBuildBuffersOnSplit() exits, the
pointer added to the loaded buffers array points to garbage. Often that goes
unnotied, because when we go through the array of loaded buffers to unload
them, buffers with a NULL pageBuffer are ignored, which can often happen by
accident even if the pointer points to garbage.
This patch fixes that by marking the temporary copy in stack explicitly as
temporary, and refrain from adding buffers marked as temporary to the array
of loaded buffers.
While we're at it, initialize nodeBuffer->pageBlocknum to InvalidBlockNumber
and improve comments a bit. This isn't strictly necessary, but makes
debugging easier.
Per recent discussion, the error message for this was actually a trifle
inaccurate, since it said "cannot be cast" which might be incorrect.
Adjust that wording, and add a HINT suggesting that a USING clause might
be needed.
If the amount of freespace on page was less than the amount reserved by
fillfactor, the calculation would underflow.
This fixes bug #6643 reported by Tomonari Katsumata.
We have no need for a timeout here really, but some broken products from
Redmond seem to lose FD_READ events occasionally, and waking up and
retrying the recv() is the only known way to work around that. Perhaps
somebody will be motivated to figure out a better answer here; but not I.
Since we have chosen to report socket EOF and error conditions via the
WL_SOCKET_READABLE flag bit, it's unsafe to wait only for
WL_SOCKET_WRITEABLE; the caller would never be notified of the socket
condition, and in some of these implementations WaitLatchOrSocket would
busy-wait until something else happens. Add this restriction to the API
specification, and add Asserts to check that callers don't try to do that.
At some point we might want to consider adjusting the API to relax this
restriction, but until we have an actual use case for waiting on a
write-only socket, it seems premature to design a solution.
Test results from buildfarm members mastodon/narwhal (Windows Server 2003)
make it look like that platform just plain loses FD_READ events
occasionally, and the only reason our previous coding seemed to work was
that it timed out every couple of seconds and retried the whole operation.
Try to verify this by reinserting a finite timeout into the pgstat loop.
This isn't meant to be a permanent patch either, just to confirm or
disprove a theory.
This should get rid of the usage of pgwin32_waitforsinglesocket entirely,
and perhaps thereby remove the race condition that's evidently still
present on some versions of Windows. The previous arrangement was a bit
unsafe anyway, since waiting at the recv() would not allow pgstat to notice
postmaster death.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
Log main-loop blocking events and the results of inquiry messages.
This is to get some clarity as to what's happening on those Windows
buildfarm members that still don't like the latch-ified stats collector.
This bulks up the postmaster log a tad, so I won't leave it in place for
long.